Panasonic CZANC2 is a controller that interfaces with split-system air conditioners. It allows for central control of multiple conditioners, with separate buttons to turn on and off individual units, as well as a master switch to control all units at once. It features operation indicator lamps for each unit so that the operator can monitor their status. The Panasonic CZANC2 can help users to efficiently manage the climate control in buildings with multiple rooms and air conditioning units.
Panasonic CZANC2 is a controller that interfaces with split-system air conditioners. It allows for central control of multiple conditioners, with separate buttons to turn on and off individual units, as well as a master switch to control all units at once. It features operation indicator lamps for each unit so that the operator can monitor their status. The Panasonic CZANC2 can help users to efficiently manage the climate control in buildings with multiple rooms and air conditioning units.
EN
FR
DE
IT
PT
GR
ES
RU
UK
Save These Instructions
Conserver ce mode d’emploi
Bewahren Sie bitte diese
Bedienungsanleitung auf.
Conservate queste istruzioni
Guarde estas instruções
Φυλάξτε τις Οδηγίες αυτές
Guarde estas instrucciones
Сохраните эту инструкцию
Збережіть ці інструкції
CZ-ANC2
Panasonic Corporation
85464609076011
ON/OFF Controller for Split System Air
Conditioner
INSTRUCTION MANUAL •
Contrôleur marche/arrêt pour climatiseur d’air
à deux blocs
MODE D’EMPLOI •
Ein-/Ausschaltsteuerung Split-Klimagerät BEDIENUNGSANLEITUNG •
Comando acceso/spento per condizionatore
d’aria a sistema Split
ISTRUZIONI PER L’USO •
Controlador de ligação/desligação de ar
condicionado com sistema distribuído
MANUAL DE INSTRUÇÕES •
Ελεγκτής ΕΝΤΟΣ/ΕΚΤΟΣ για κλιματιστικό με
εσωτερική και εξωτερική μονάδα
ΕΓΧΕΙΡΙΔΙΟ ΟΔΗΓιΩΝ
•
Controlador de encendido/apagado para
acondicionador de aire tipo separado
MANUAL DE INSTRUCCIONES •
Пульт Вкл/Выкл для сплит-системы
кондиционирования
ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ
•
Пульт Вкл/Викл для кондиціонерів
роздільного типу
ПОСІБНИК КОРИСТУВАЧА
•
EN-2
Contents
Product Information .......................................................................................EN-2
Alert Symbols ................................................................................................EN-2
Installation Location .......................................................................................EN-3
Electrical Requirements.................................................................................EN-3
Safety Instructions .........................................................................................EN-3
How to Use the ON/OFF Controller ...............................................................EN-4
Functions of buttons
..........................................................................EN-4
How to use the nameplate
.................................................................EN-5
Product Information
If you have problems or questions concerning your Air Conditioner, you will
need the following information. Model and serial numbers are on the nameplate
on the bottom of the cabinet.
Model No. CZ-ANC2 Serial No.
Date of purchase
Dealer’s address
Phone number
Alert Symbols
The following symbols used in this manual, alert you to potentially
dangerous conditions to users, service personnel or the appliance:
WARNING
This symbol refers to a hazard or unsafe
practice which can result in severe personal
injury or death.
CAUTION
This symbol refers to a hazard or unsafe
practice which can result in personal injury
or product or property damage.
page
EN-3
EN
Installation Location
We recommend that this ON/OFF controller be installed properly by •
qualifi ed installation technicians in accordance with the Installation
Instructions provided with the ON/OFF controller.
WARNING
Do not install this ON/OFF controller where there are fumes or •
fl ammable gases, or in an extremely humid space such as a
greenhouse.
Do not install the ON/OFF controller where excessively high heat-•
generating objects are placed.
Electrical Requirements
All wiring must conform to the local electrical codes. Consult your dealer or a 1.
qualifi ed electrician for details.
Wiring must be done by a qualifi ed electrician.2.
CAUTION
To warm up the system, the power mains must
be turned on at least fi ve (5) hours before
operation. Leave the power mains ON unless
you will not be using this appliance for an
extended period.
Safety Instructions
Read this booklet carefully before using this ON/OFF controller. If you •
still have any diffi culties or problems, consult your dealer for help.
The air conditioner is designed to give you comfortable room •
conditions. Use this only for its intended purpose as described in the
Instruction Manual.
WARNING
Never touch the unit with wet hands.•
Never use or store gasoline or other fl ammable vapor or liquid near •
the air conditioner — it is very dangerous.
The air conditioner has no ventilator for intaking fresh air from •
outdoors. You must open doors or windows frequently when you
use gas or oil heating appliances in the same room, which consume
a lot of oxygen from the air. Otherwise there is a risk of suffocation
in an extreme case.
CAUTION
Do not turn the air conditioner on and off from the power mains •
switch. Use the ON/OFF operation button.
Do not stick anything into the air outlet of the outdoor unit. This is •
dangerous because the fan is rotating at high speed.
Do not let children play with the air conditioner.•
Do not cool or heat the room too much if babies or invalids are •
present.
EN-4
How to Use the ON/OFF Controller
Functions of buttons
C: All OFF button
A: ON/OFF button
B: All ON button
A: ON/OFF button Press this to start up or stop an individual air conditioner.
B: All ON button
NOTE
Press this to start up all the air conditioners at the same time.
The indoor units which can be operated by the ON/OFF controller
now start operating in sequence at intervals of 1 to 2 seconds.
C: All OFF button Press this to stop all the air conditioners at the same time.
EN-5
EN
How to use the nameplate
The nameplate shows the rooms where the air conditioners are to be operated, and it enables the operating
statuses of the air conditioners in those rooms to be checked by the operation indicator lamps.
Steps
Insert an implement such as a ballpoint pen into the hole on the left of the transparent cover, and remove 1.
the cover.
Use a writing instrument such as an oil-based pen to write the names of the rooms on the switch name 2.
labels provided, and adhere the labels to the name displays.
Authorized representative in EU
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany Printed in Japan
-
1
-
2
-
3
-
4
-
5
-
6
Panasonic CZANC2 is a controller that interfaces with split-system air conditioners. It allows for central control of multiple conditioners, with separate buttons to turn on and off individual units, as well as a master switch to control all units at once. It features operation indicator lamps for each unit so that the operator can monitor their status. The Panasonic CZANC2 can help users to efficiently manage the climate control in buildings with multiple rooms and air conditioning units.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Panasonic CZANC2 Owner's manual
-
-
-
-
-
Panasonic CZRWSD2 Operating instructions
-
Panasonic S-250PE1E8 Owner's manual
-
-
-
Other documents
-
Hama 00062829 Owner's manual
-
Tyco F3200 User manual
-
Yamaha MTX3 Owner's manual
-
RTS LKP-957 User manual
-
Yamaha MTX5 Owner's manual
-
-
Microchip Technology PIC16F15244 Curiosity Nano Hardware User's Manual
-
Rush SRW-5000 Installation guide
-
Sony ICF-2010 User manual
-
Samsung UE32J5205AK User manual