DRHMW8760
DDR3-1333, PC3-10600S, Unbuffered, NECC, 1.5V, 204-pin DIMMs
DRHMW8760 08-Dec-11
Copyright
2011 Dataram Corporation | U.S.A. Headquarters +1 609-799-0071 | Offices in Europe and Asia | www.dataram.com
The information contained in this document has been carefully checked and is believed to be reliable and accurate. However, Dataram assumes no responsibility for errors.
Products in Family
DRHMW8760/4GB (1 x 4GB 2Rx8 SODIMM)
DRHMW8760/8GB (1 x 8GB 2Rx8 SODIMM)
Features Description
204-pin SO-DIMM
67.6 mm wide by 30 mm high (2.661” x1.181”)
Data Transfer Rate: 10.6 Gigabytes/sec
Operating Voltage: 1.5V(1.425V~1.575V)
Fully RoHS Compliant
Each DRHMW8760 upgrades consists of a single DDR3-
1333 Unbuffered Non-ECC SO-DIMM that conforms to
JEDEC’s DDR3, PC3-10600S standard. One 2K-bit
EEPROM is used for Serial Presence Detect.
Dataram Product HP Product Supported in these HP systems:
DRHMW8760/4GB
DRHMW8760/8GB
AT913AA
QP013AA
HP EliteBook 8760w, 8560w, and 8460w Mobile
Workstations
Notes
Tolerances on all dimensions
except where otherwise
indicated are ±.15 (.0059).
All dimensions are expressed
in millimeters [inches]