![](//vs1.manuzoid.com/store/data-gzf/dc5957a0077b0fc9522821a509dbf93b/2/000388105.htmlex.zip/bg4.jpg)
Setup
OSD language Japanese, English, German, French, Italian, Spanish
Monitor
LCD Monitor 6.7cm (2.7") TFT Screen LCD Display (230K dots)
Field of View : approx. 100%
Flash
Built- in- Flash Auto, Auto/Red-eye Reduction, Forced On, Slow Sync./Red-eye Re-
duction, Forced Off
0.6 - 5.7m (Wide/i.ISO), 1.0 - 2.8m (Tele/i.ISO)
Media
Recording Media Built- in Memory, SD Memory Card, SDHC Memory Card, SDXC Me-
mory Card
Built- in- Memory Approx. 10MB
Audio
Microphone / Speaker Mono / Mono
Interface
Interface USB2.0 High speed
Power
Power Li-ion Battery Pack (3.6V / 690mAh / 2.5Wh)
AC Adaptor (Input: 110-240V AC)(Included, connect with USB cable)
Battery life (approx.) 250 pictures (CIPA Standard)*1
Standard Package
Included Software PHOTOfunSTUDIO 9.0 LE, Adobe Reader
Standard Accessories Battery Pack, AC adaptor, USB Cable, Hand Strap, CD-ROM
NOTE *1
Recording conditions by CIPA standard
- CIPA is an abbreviation of [Camera & Imaging Products Association].
- Temperature: 23 oC (73.4 oF)/Humidity: 50%RH when LCD monitor is
on.
- Using a Panasonic SD Memory Card (32 MB).
- Using the supplied battery.
- Starting recording 30 seconds after the camera is turned on. (When
the optical image stabilizer function is set to [ON].)
- Recording once every 30 seconds with full flash every second recor-
ding.
- Rotating the zoom lever from Tele to Wide or vice versa in every re-
cording.
- Turning the camera off every 10 recordings and leaving it until the
temperature of the battery decreases.
*2
- These are standard times taken at a temperature of 23 oC (73.4 oF)
and a humidity of 50%RH.