Kingston Technology KVR13LR9S8L/2HC Datasheet

Kingston Technology
Brand
Kingston Technology
Model
KVR13LR9S8L/2HC
Category
Memory modules
Type
Datasheet

Kingston Technology KVR13LR9S8L/2HC

This 2GB CL9 Registered w/Parity 240-Pin DIMM is a high-performance memory module designed for use in servers and workstations. It features a fast CL9 latency and a high bandwidth of PC3-10600, making it ideal for demanding applications such as video editing, 3D rendering, and gaming. The module is also equipped with ECC (Error Correction Code) technology, which helps to ensure data integrity by detecting and correcting errors that may occur during data transfer. In addition, the module is RoHS compliant and is backed by a lifetime warranty.

Here are some of the benefits of using Kingston Technology KVR13LR9S8L/2HC:

Kingston Technology KVR13LR9S8L/2HC

This 2GB CL9 Registered w/Parity 240-Pin DIMM is a high-performance memory module designed for use in servers and workstations. It features a fast CL9 latency and a high bandwidth of PC3-10600, making it ideal for demanding applications such as video editing, 3D rendering, and gaming. The module is also equipped with ECC (Error Correction Code) technology, which helps to ensure data integrity by detecting and correcting errors that may occur during data transfer. In addition, the module is RoHS compliant and is backed by a lifetime warranty.

Here are some of the benefits of using Kingston Technology KVR13LR9S8L/2HC:

KVR13LR9S8L/2HC
2GB 1Rx8 256M x 72-Bit PC3-10600
CL9 Registered w/Parity 240-Pin DIMM
DESCRIPTION
This document describes ValueRAM's 256M x 72-bit (2GB)
DDR3L-1333 CL9 SDRAM (Synchronous DRAM), low voltage,
registered w/parity, 1Rx8, ECC, VLP (very low profile) memory
module, based on nine 256M x 8-bit DDR3L-1333 FBGA
components. The SPD is programmed to JEDEC standard
latency DDR3-1333 timing of 9-9-9 at 1.35V and 1.5V. This
240-pin DIMM uses gold contact fingers. The electrical and
mechanical specifications are as follows:
FEATURES
• JEDEC standard 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~
1.575V) Power Supply
• VDDQ = 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~ 1.575V)
• 667MHz fCK for 1333Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 9, 8, 7, 6
• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
• Programmable CAS Write Latency(CWL) = 7 (DDR3-1333)
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with
starting address “000” only), 4 with tCCD = 4 which does not
allow seamless read or write [either on the fly using A12 or
MRS]
• Bi-directional Differential Data Strobe
• Internal(self) calibration : Internal self calibration through ZQ
pin (RZQ : 240 ohm ± 1%)
• On Die Termination using ODT pin
• On-DIMM thermal sensor (Grade B)
• Average Refresh Period 7.8us at lower than TCASE 85°C,
3.9us at 85°C < TCASE
< 95°C
• Asynchronous Reset
• PCB : Height 0.740” (18.75mm), double sided component
Document No. VALUERAM1145-001.A00 04/27/12 Page 1
Memory Module Specifi cations
SPECIFICATIONS
CL(IDD) 9 cycles
Row Cycle Time (tRCmin) 49.5ns (min.)
Refresh to Active/Refresh 160ns (min.)
Command Time (tRFCmin)
Row Active Time (tRASmin) 36ns (min.)
Maximum Operating Power (1.35V) = 3.036 W*
(1.50V) = 3.576 W*
UL Rating 94 V - 0
Operating Temperature 0
o
C to 85
o
C
Storage Temperature -55
o
C to +100
o
C
*Power will vary depending on the SDRAM and
Register/PLL used.
Continued >>
DRAM Supported: Hynix C-Die
MODULE DIMENSIONS:
Document No. VALUERAM1145-001.A00 Page 2
(Units: millimeters)
  • Page 1 1
  • Page 2 2

Kingston Technology KVR13LR9S8L/2HC Datasheet

Kingston Technology
Brand
Kingston Technology
Model
KVR13LR9S8L/2HC
Category
Memory modules
Type
Datasheet

Kingston Technology KVR13LR9S8L/2HC

This 2GB CL9 Registered w/Parity 240-Pin DIMM is a high-performance memory module designed for use in servers and workstations. It features a fast CL9 latency and a high bandwidth of PC3-10600, making it ideal for demanding applications such as video editing, 3D rendering, and gaming. The module is also equipped with ECC (Error Correction Code) technology, which helps to ensure data integrity by detecting and correcting errors that may occur during data transfer. In addition, the module is RoHS compliant and is backed by a lifetime warranty.

Here are some of the benefits of using Kingston Technology KVR13LR9S8L/2HC:

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents