ProScan PLDED4022-UK is an advanced LED TV that offers a wide range of features for an enhanced entertainment experience. With its high-definition display, you can enjoy your favorite movies, shows, and games in stunning clarity and detail. Experience immersive sound with its built-in speakers, or connect external audio devices via the headphone jack for a more personalized listening experience.
ProScan PLDED4022-UK is an advanced LED TV that offers a wide range of features for an enhanced entertainment experience. With its high-definition display, you can enjoy your favorite movies, shows, and games in stunning clarity and detail. Experience immersive sound with its built-in speakers, or connect external audio devices via the headphone jack for a more personalized listening experience.
Model:PLDED4022-UK
CONTENTS
2
3
6
7
4
8
9
SAFETY
PRECAUTION
IMPORTANT
SAFETY
INSTRUCTION
ACCESSORIES
GETTING
STARTED
5
CONTROL
REFERENCE
GUIDE
WALL MOUNT
INSTALLATION
INITIAL SETUP
TV SETUP
CONNECTIONS
1
English
15
18
19
21
23
1
2
3
3
9
10
10
11
11
4
7
7
8
13
14
14
14
Remote Control
Front View
Back View
Side View
Antenna Connection
AV Connection
YPbPr Connection
HDMI Connection
VGA Connection
Headphone Connection
Power Cord Connection
Coax(SPDIF) Connection
Putting The Unit On A Proper Place
Source Selection
Turning The Unit On For The First Time
TV(CHANNEL) Menu
Picture Menu
Sound Menu
Lock System Menu
Setup Menu
12
9
11
CONTENTS
26
10
27
11
PC SETUP
PC Menu
SAFETY CLASS :This is an IEC safety class I product
and it must be grounded for safety.
12
28
USB MEUN
Photo
31
13
33
14
15
34
DISPLAY
MODE
SPECIFICATION
TROUBLE-
SHOOTING
GUIDE
PC Formats
Video Formats
TV Symptom
32
ATV/SCART/
HDMI/AV/YPbPr
PC
Music
Movie
Tex t
29
29
30
*
SAFETY PRECAUTION
CAUTION
•
•
•
PLACEMENT INFORMATION
SAFETY INFORMATION
RATING PLATE LOCATION
WARNING:
WARNING:
1
CAUTION MARKING WAS LOCATED AT THE REAR
OF THE APPARATUS.
WARNING: TO REDUCE THE RISK OF ELECTRIC
SHOCK，DO NOT REMOVE COVER（OR BACK）
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrowhead symbol,
within an equilateral triangle,is intended to
alert the user to the presence of uninsulated
“dangerous voltage”within the product's enclosure
that may beof sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral
Triangle is intended to alert the user to
The presence of important operating and
maintenance (servicing) instructions in the literature
accompanying the appliance.
DANGER OF EXPLOSION IF BATTERY IS
INCORRECTLY REPLACED. REPLACE ONLY
WITH THE SAME OR EQUIVALENT TYPE.
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
•
•
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
TO REVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS UNIT TO RAIN OR MOISTURE. DO
NOT PLACE OBJECTS FILLED WITH LIQUIDS ON
OR NEAR THIS UNIT.
SHOULD ANY TROUBLE OCCUR, DISCONNECT
THE AC POWER CORD AND REFER SERVICING
TO A QUALIFIED TECHNICIAN.
Do not use this unit in places that are extremely
hot, cold, dusty or humid.
Do not restrict the airflow of this unit by placing it
somewhere with poor airflow, by covering it with
a cloth, by placing it on bedding or carpeting.
When connecting or disconnecting the AC power
cord, grip the plug and not the cord itself. Pulling
the cord may damage it and create a hazard.
When you are not going to use the unit for a long
period of time, disconnect the AC power cord.
The rating plate is located on the rear of the unit.
Changes or modifications to this
unit
not expressly approved by the party responsible
for compliance could void the user authority
to operate the unit.
•
•
•
•
“HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC.”
IMPORTANT SAFETY INSTRUCTIONS
2
1)Read these instructions.
2)Keep these instructions.
3)Heed all warnings.
4)Follow all instructions.
5)Do not use this apparatus near water.
6)Clean only with a dry cloth.
7)Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
8)Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (Including amplifiers) that
produce heat.
9)Do not defect the safety purpose of the
polarized or grounding-type plug.
A polarized plug has two blades with one
wider than the other.
A groundingtype plug has two blades
and a third grounding prong.
The wide blade or the third prong is
provided for your safety.
If the provided plug does not fit into your
wall outlet, consult an electrician for
replacement of the obsolete outlet.
10)Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit
from the apparatus.
11)Only use attachments / accessories specified
by the manufacturer.
12)Use only with the cart, stand,
tripod, bracket, or table
specified by the manufacturer,
or sold with the apparatus.
When a cart is used, use caution when
moving the cart / apparatus combination to
avoid injury from tip-over.
13)Unplug this apparatus during lightning
Storms or when unused for long periods of
time.
14)Refer all servicing to qualified service
personnel. Servicing is required when the
apparatushas been damaged in any way,
such as the power cord or plug is damaged,
liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate
normally, or has been dropped.
15)To prevent electric shock, ensure the grounding
pin on the AC cord power plug is securely
connected.
ACCESSORIES
Please check and identify the supplied accessories.
GETTING STARTED
USING THE REMOTE CONTROL
BATTERY REPLACEMENT
CAUTION
: Danger of explosion if battery is incorrectly replaced.
NOTES
WARNING :
3
·Point the remote control at the remote sensor located on the unit.
·When there is a strong ambient light source, the performance of the infrared remote sensor
·may be degraded, causing unreliable operation.
·The recommended effective distance for remote operation is about 16 feet (5 meters).
When the batteries become weak, the operating distance of the remote control is greatly
reduced and you will need to replace the batteries.
·If the remote control is not going to be used for a long time, remove the batteries to avoid
damage caused by battery leakage corrosion.
·Do not mix old and new batteries. Do not mix ALKALINE, standard (CARBON-ZINC) or
rechargeable (NICKEL-CADMIUM) batteries.
·Always remove batteries as soon as they become weak.
·Weak batteries can leak and severely damage the remote control.
Do not dispose batteries in a fire. Batteries may explode or leak.
Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
1.Open the battery door 2.Insert2"AAA"batteries
................................................................................................................
...........................................................................................................
x 2
x 1
x 1
x 1
Remote control .................................................................................................................
Remote control
Battery(AAA)
Warranty Card
Instruction Manual
Base stand and 4 screwsbase stand
..........................................................................
x 1
Column bracket and 5 column bracket screws
...........................................................
x 1
...................................................................................................................
Screw driver
................................................................................................................
x 1
4
STANDBY
Turn the TV ON or OFF.
MUTE
Press to mute the sound. Press again or press V+ to
unmute the TV.
SOURCE(INPUT)
Press to cycle through the input source.
PMODE
Press it to cycle through the available video
picture modes.
SMODE
Press to cycle through the different sound settings.
I/II
Press to search the NICAM modes.
SLEEP
Select amount of time. Let your TV turn off automatically.
NUMBER BUTTONS
Press 0-9 to select a TV channel directly when you are
watching TV. The channel change after 2 seconds.
THUMBSTICK(▲/▼/◄/►OK ENTER)
Allows you to navigate the on-screen menus and
adjust the system settings to your preference.
MENU
Brings up the main TV menu to the screen.
EXIT
Exit the main TV menu to the screen.
VOL+/VOL-
Press to increase/decrease the sound level.
CH+/CH-
Press to scan through channels.
-/--
Press this button to enter a program number for
multiple program channel such as 2-1,etc, or to display channel
Return to the previous channel viewed.
DISPLAY
Press to display the source and channel’s information.
list under TV model.
CONTROL REFERENCE GUIDE
REMOTE CONTROL
ATV MODE:
CONTROL REFERENCE GUIDE
REMOTE CONTROL
DTV MODE:
NUMBER BUTTONS
Press 0-9 to select a teletext page.
TEXT
Press to switch between TV and Teletext mode.
COLOUR BUTTONS
Select 4 Preferred TELETEXT page.
SUBTITLE
To display subtitle.
HOLD
Freeze the current page.
SIZE
Change the picture size.
REVEAL
Reveal or hide the hidden words.
CANCEL
Teletext Cancel.
INDEX
Request index page when index link is valid.
MIX
TV and TXT picture are mixed together in
transparent background.
SUBPAGE
TELETEXT Subpage.
5
NUMBER BUTTONS
Press 0-9 to select a channel.
TV MENU
Brings up the main DTV menu to the screen.
DISPLAY
Press to display the source and channel’s information.
SIZE
Change the picture format.
FAV+/FAV/FAV-
Press to increase/decrease your favourite program in DTV mode.
EPG
Launches the EPG (Electronic Program Guide) in DTV mode.
MEDIA
Press to select MEDIA mode.
REC
Record the program in DTV mode.
TIMESHIFT
Press to select TIMESHIFT function.
TV/RADIO
Select TV or Radio modes.
PLAY/PAUSE in TIMESHIFT and MEDIA mode.
Jump to previous and next track in MEDIA mode.
Fast reverse and forward key in MEDIA mode.
Stop in MEDIA mode or exit the REC or TIMESHIFT mode.
THUMBSTICK(▲/▼/◄/►/OK ENTER)
Allows you to navigate the on-screen menus and
adjust the system settings to your preference.
CH+/CH-
When watching a channel, changes the channel.
COLOUR BUTTONS
Colour buttons ( respectively red, green, yellow and blue )
used in a few sub-menus.
SUBTITLE
To display subtitle.
CONTROL REFERENCE GUIDE
REMOTE CONTROL
6
CONTROL REFERENCE GUIDE
FRONT VIEW
7
BACK VIEW
1.Color Screen
2.Remote Sensor
Do not block this sensor or the
remote control will not work.
3.Standby Indicator
Indicates whether the unit is ON
or in STANDBY (OFF) mode.
Light in red: The unit is in STANDBY.
Light in blue:The unit is turned ON.
4. Speakers
Video
R
L
SCART
VGA RF
YPbPr
Head
Phone
HDMI1 HDMI2
HDMI3
CI COAX
USB
1.Power Cord.
2.Video:Connect the Video output jack
of DVD or VCR.
3.R/L AUDIO:Connect the Video/YPbPr
AUDIO output jack of DVD.
4.SCART:Connect the SCART jack of VCR
or DVD.
5.PC AUDIO: Connect the Audio output
jack of PC.
6.VGA:
RF IN: Connect the antenna.
8.YPbPr:Component in jack.
9.Headphone: Connect the earphone.
10.HDMI1/2/3: Connect the HDMI output
jack of DVD.
11.CI:Connect to the CI card.
12.USB: Connect to portable usb device.
13.Coax: Coax output.
Connect a computer to these jacks.
7.
PC
Audio
11 12 13
CONTROL REFERENCE GUIDE
8
SIDE VIEW
1
VOL+
VOL-
CH+
CH-
MENU
SOURCE
STANDBY
CONNECTIONS
CONNECTING A TV ANTENNA / CABLE / SATELLITE
To view television channels correctly, a signal must
be received from one of the following sources:
- An indoor or outdoor aerial antenna
- A cable system
- A satellite system
For receiving over-the-air TV broadcasts, we
recommend that you use an external fixed antenna.
Should you require the use of a temporary antenna,
please ensure that you purchase an antenna with
sufficient ability to receive in weak signal areas.
Only when you are in close proximity to a transmitter
will a temporary antenna reproduce a signal as
strongly as a fixed antenna.
To connect to other equipment such as a VCR, camcorder, satellite system or cable, etc.
CONNECTING AN A/V DEVICE
NOTE
CONNECTING DEVICES WITH A COMPOSITE
VIDEO OUTPUT
Connecting to a VCR / Video Game System / Camcorder
AUDIO VIDEO OUT
NOTE
To connect A/V devices such as a VCR, video game system or camcorder.
Connect the AUDIO / VIDEO cable (not included) as shown.
Make sure you connect the cable from the other equipment ( and ) to this unit
P. lease refer to the user manual
for the other equipment for
more information.
Satellite, cable or TV antenna
cable to TV ANTENNA
terminal (cable not included)
9
(AV in)
To AUDIO / VIDEO
IN jacks
To AUDIO / VIDEO
OUT jacks
CONNECTIONS
CONNECTING A HIGH-DEFINITION (HD) SOURCE USING CONNECTION
NOTE
COMPONENT
High-Definition (HD) Devices with component video output must be connected to the Y input.
Connect the component video cable and audio cable (not included) as shown.
Make sure you connect the component video cable and audio cable from the other equipment
When connecting a DVD player to the television,
the picture resolution is solely dependent upon
the resolution supported by the DVD player attached.
DVD player resolutions vary from 480i to 1080i.
and this television can support DVD players up to
a maximum resolution of 1080i.
PbPr
* May require a subscription
for receiving HD channels,
check with your cable/satellite
service provider for details.
To COMPONENT
VIDEO OUT jacks
CONNECTING A HIGH-DEFINITION (HD) SOURCE USING HDMI CONNECTION
HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection
for use with DVD players, DTV, set-top boxes and other digital AV devices. HDMI was developed to provide
the technologies of High Bandwidth Digital Content Protection (HDCP) as well as Digital Visual Interface
(DVI) in one specification. HDCP is used to protect digital content transmitted and received by
DVI-compliant or HDMIcompliant displays.
HDMI has the capability to support standard, enhanced or high-definition video plus standard to
multi-channel surround-sound audio. HDMI features include uncompressed digital video, a bandwidth of
up to 2.2 gigabytes per second (with HDTV signals), one connector (instead of several cables and
connectors), and communication between the AV source and AV devices such as DTVs.
To HDMI
IN jack
To HDMI
jackOUT
To COMPONENT
VIDEO IN jacks
AUDIO IN jacks
To COMPONENT AUDIO
OUT jacks
Connect the HDMI cable (not included) as
shown:
Make sure you connect the cable from the
source equipment ( ) to this unit
().
HDMI OUT
HDMI IN
HDMI CABLE
(NOT INCLUDED)
（COMPONENT OUT and AUDIO OUT）to the unit COMPONENT IN.
COMPONENT IN
10
To COMPONENT
CONNECTIONS
CONNECTING A
AUDIO - PC OUT
VGA AUDIO - PC IN
PC
VGA
Connect the 15-pin D-SUB PC/VGA connector
from your computer to the 15-pin D-SUB PC/VGA
input on this unit using a monitor cable and an
audio cable (not included) as shown.
Make sure you connect the cable from the computer
( and ) to this unit
(and ).
TO PC Connector
TO AUDIO OUT jacks
NOTE
11
• Insert the power plug fully into the socket outlet
If the power plug is loose it could generate heat and
cause fire
Do not touch the power plug with a wet hand
This may cause electrical shock
Do not use any power cord other than that provided
with this TVThis may cause fire or electrical shock
Do not damage the power cord
A damaged cord may cause fire or electrical shock
•Do not move the TV w i t h t h e c o rd plugged in the
socket outlet.
•Do not place a heavy object on the cord or
place
the cord near a high-temperature object.
•Do not twist the cord, bend it excessively, or stretch it.
•Do not use a damaged power plug or socket outlet.
.
(,
.)
.
.
•
•
•
connected to prevent electrical shock.
Ensure that the power plug is easily accessible.
Ensure the earth pin on the power plug is securely
•
•
.)
•Do not pull on the cord. Hold onto the power plug body when disconnecting cord.
CONNECTIONS
Connection to a Home Theater Audio System
For BEST audio performance
Connecting to a Home Theater System
Dolby Digital can deliver optimal 2 channel
stereo or surround sound with five discrete
full range channels plus a sixth channel for
a subwoofer.
Enjoy optimal sound reproduction from your
system with a Dolby Digital amplifier that
incorporates a digital coaxial input. Connect
an optional digital cable directly to the
television’s Coax audio output to listen
through all inputs except VGA.
(The VGA does not support digital audio）
How To Setup SPDIF
Press the MENU button on the remote control
Press the right ► arrow button to select sound
Press the down ▼ arrow button to highlight
SPDIF type right ► Auto or PCM or Off.
12
Coax
SPDIF OUT
Sound
Move
Adjust
MENU:
Return
EXIT:Exit
Sound Mode
T
T
r
r
e
e
b
b
l
l
e
e
B
B
a
a
s
s
s
s
Balance
Surround Sound
EQ Setting
AVL
SPDIF
O
O
f
f
f
f
P
P
C
C
M
M
Standard
O
O
f
f
f
f
0
0
0
0
0
0
WALL MOUNT INSTALLATION
INSTALLING REMOVING THE BASE STAND
WARNING
/
:The
LED Display is very fragile and must be protected at all times when removing the b ase
Stand
Be sure that no hard or sharp object or anything that could scratch or damage the LED display comes into
contact with it Do NOT exert pressure on the front of the unit at any time because the screen could crack
,
.
. .
NOTE
Remove the base stand before mounting the unit on the wall.
13
8”
8”
M5
1 Disconnect all cables or cords connected to the unit
2Lay the unit down on a flat surface with the back side facing up Please make sure to place a soft
cushioned material such as a pillow or thick piece of foam beneath t h e s cr e en
3To remove the base stand loosen screws off the holes then pull downwards to release
the base stand
. .
.,
.
MOUNTING ON THE WALL
This unit is VESA-compliant, and is designed to be wall-mounted with a VESA-compliant
(200mm x 200mm) mounting kit designed for flat-panel TV's (not supplied). Mount this unit according to
the instructions included in the mounting kit.
Length of screw should not exceed 6 mm.
8”x
8”
INITIAL SETUP
When you turn on your television set for
the first time, be sure to place it on a solid
stable surface.
To avoid danger, do not expose the TV
to water, or a heat source
(e.g. lamp, candle, radiator).
Do not obstruct the ventilation grid
at the rear and be sure to leave sufficient
gaps around the unit.
PUTTING THE UNIT ON A PROPER PLACE
TURNING THE UNIT ON FOR THE FIRST TIME
After you have initially connected your TV
antenna or cable,
turn the television ON.
A screen will display asking you to run a
to search and receive
available local digital channels.
It is here where you will select antenna options
and run .
Channels will be stored in the TV tuner.
Press the button on the remote control.
Channel Auto Scan
Channel Auto Scan
MENU
Press the button to highlight DTV +ATV .
Using the buttons, scroll to highlight chaneel
mode.
1. Press the button on the remote control.
2.
and select any of them using the button.
Note:
Before watching please make sure all necessary
cables and devices are connected.
OK
Use or button to select the optionsthe
(The screen will change to your desired source).
(DTV,ATV,SCART, HDMI1,HDMI2,HDMI3,
PC,USB)
AV,YPbPr,
14
First Time Setup
OSD Language
English
Country
Auto Scan
UK
DTV+ATV
Start
MENU:Return
EXIT
:Exit
Move
Adjust
Source
ATV
AV
HDMI2
YPbPr
SCART
HDMI1
HDMI3
SOURCE:Exit
DTV
PC
USB
TV SETUP
15
Press MENU button to display the main menu.
Press ◄ / ► button to select CHANNEL in the main menu,it will highlight the first option.
This feature searches channels automatically for you.
A
A
U
U
T
T
O
O
S
S
C
C
A
A
N
N
CHANNEL MENU
Channel
Auto Scan
Manual Scan
Channel Edit
Common lnterface
Signal lnformation
MENU:Return
EXIT
:Exit
Move
OK:Select
Auto Scan
Country
Mode
Start
MENU:Return
EXIT
:Exit
Move
Adjust
UK
DTV+ATV
, then press OK/Press ▼ / ▲ button to select ►button to enter submenu.A
A
u
u
t
t
o
o
S
S
c
c
a
a
n
n
, then press OK/Press ▼ / ▲ button to select ►button to tuning start .S
S
t
t
a
a
r
r
t
t
This feature can manually search for channels to serve you.
M
M
A
A
N
N
U
U
A
A
L
L
S
S
C
C
A
A
N
N
, then press OK/Press ▼ / ▲ button to select ►button to enter submenu.M
M
a
a
n
n
u
u
a
a
l
l
S
S
c
c
a
a
n
n
Analog Manual Scan
Digital Manual Scan
Manual Scan
MENU:Return
EXIT
:Exit
Move
OK:Select
TV SETUP
Press
▼ / ▲ button to select , then press OK/►button to enter submenu.
D
D
I
I
G
G
I
I
T
T
A
A
L
L
M
M
A
A
N
N
U
U
A
A
L
L
S
S
C
C
A
A
N
N
D
D
i
i
g
g
i
i
t
t
a
a
l
l
S
S
c
c
a
a
n
n
.Press ▼ / ▲ button to select , then press OK/►button S
S
t
t
a
a
r
r
t
t
16
474.00 MHz
0
Frequency
Start
Strength
CH21
Digital Scan
Dignital Manual Scan
MENU:Return
EXIT
:Exit
Move
Adjust
0~9:Input
Press ▼ / ▲ button to select , then press OK/►button to enter submenu.
A
A
N
N
A
A
L
L
O
O
G
G
M
M
A
A
N
N
U
U
A
A
L
L
S
S
C
C
A
A
N
N
A
A
n
n
a
a
l
l
o
o
g
g
M
M
a
a
n
n
u
u
a
a
l
l
S
S
c
c
a
a
n
n
Analog Scan
Channel to Save
Color System
Sound System
AFC
Start
CH001
Auto
Auto
Off
440.25MHz
Analog Manual Scan
MENU:Return
EXIT
:Exit
Move Fine tune
0~9:Input
.Press ▼ / ▲ button to select , then press OK/►button S
S
t
t
a
a
r
r
t
t
This feature can edit channels.
C
C
H
H
A
A
N
N
N
N
E
E
L
L
E
E
D
D
I
I
T
T
Press ▼ / ▲ button to select , then press OK/►button to enter submenu.C
C
h
h
a
a
n
n
n
n
e
e
l
l
E
E
d
d
i
i
t
t
800 ONE HD
801 TEN Dgital
802 ONE HD
803 ONE HD
Delete Skip Move
Channel Edit
Move
MENU:Return
EXIT
:Exit
OK:Select
Page
The three colored key is the
shortcut key for programming the channel.
First press▼ / ▲ to highlight the channel
you want to delete or move or skip, then:
Press the button to delete the channel.
Press the button to skip the select
channel.(Your TV set will skip the channel
automatically when using CH+/- to view the
channels.)
Press the button to to set the channel
to moving state. Then press▼ / ▲ to move
it to the position you want to put.
Red
Green
Blue
TV SETUP
Press
▼ / ▲ button to select , then press OK/►button to enter submenu.
Only available when there is CI card under DTV.
C
C
O
O
M
M
M
M
O
O
N
N
I
I
N
N
T
T
E
E
R
R
F
F
A
A
C
C
E
E
C
C
o
o
m
m
m
m
o
o
n
n
I
I
n
n
t
t
e
e
r
r
f
f
a
a
c
c
e
e
Common Interface
MENU:Return
EXIT
:Exit
Move
Irdeto Access
IRDETO-MAIN
2.Messages
3.Language Setup
4.Update Software
Press OK’ to select;Press ‘EXIT’ to quit.‘
1.Status
OK:Select
Press ▼ / ▲ button to select , then press OK/►button to see the detail
information about the signal.
Only available when there is signal under DTV.
S
S
I
I
G
G
N
N
A
A
L
L
I
I
N
N
F
F
O
O
R
R
M
M
A
A
T
T
I
I
O
O
N
N
S
S
i
i
g
g
n
n
a
a
l
l
I
I
n
n
f
f
o
o
r
r
m
m
a
a
t
t
i
i
o
o
n
n
MENU:Return
EXIT:Exit
Network Nam
Channel
Frequerey
Modulation
Strength
Quality
e
Crystal Palace
CH 21
474.00 MHZ
64 QAM
0
0
Signal Information
Please Note:
The channel options are only available when you select TV as your SOURCE.
When you open the OSD menu on other sources (HDMI, YPbPr,AV, PC) these
options will be grayed out.
17
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
ProScan PLDED4022-UK is an advanced LED TV that offers a wide range of features for an enhanced entertainment experience. With its high-definition display, you can enjoy your favorite movies, shows, and games in stunning clarity and detail. Experience immersive sound with its built-in speakers, or connect external audio devices via the headphone jack for a more personalized listening experience.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
ProScan 26LB30Q User manual
-
Element 32LE30Q User manual
-
-
-
-
-
-
RCA RLED1530-WHITE User manual
-
-
ProScan PLDED5066A User manual
Other documents
-
-
Sanyo LCD-47XR8DA User manual
-
Palsonic TFTV495PWHD Owner's manual
-
Palsonic TFTV555HD Owner's manual
-
Curtis LCD4015AB User manual
-
CHiQ L24G4 Operating instructions
-
CHiQ L43G4 Operating instructions
-
-
-
CHiQ L55G4 Operating instructions