Uniden D1760-6 User manual

Brand: Uniden

Model: D1760-6

Category: Telephones

Type: User manual

D1760 base

with cordless

handset

Battery

cover

Accessory handset

and charger

If you purchased

model number:

You should

have:

D1760 None

D1760-2 1 of each

...

D1760-11 10 of each

D1760-12 11 of each

* If the model number ends in R,

your package includes a DRX100

range extender. Refer to the

DRX100 owner’s manual for details.

You will also nd:

Not pictured:

• Rechargeable

battery (BT-1021)

• AC adapter (PS-0035)

• Telephone cord

• Ifanyitemsaremissingordamaged,contactourCustomerCareLine

immediately.Neverusedamagedproducts!

• Needhelp?Getanswers24/7atourwebsite: www.uniden.com.

If You... Contact Uniden’s... Phone Number

have a question or problem Customer Care Line*

817-858-2929 or

800-297-1023

need a replacement part or an

accessory

Parts Department* 800-554-3988

need special assistance due to

a disability

Accessibility Help Line

800-874-9314

(voice or TTY)

* Duringregularbusinesshours,CentralStandardTime;seeourwebsiteforde-

tailedbusinesshours.

D1760 Series User's Guide

What's in the box?

Not pictured:

• Rechargeable

battery (BT-1021)

• Battery cover

• AC adapter

(PS-0035)

Ft. Worth, Texas U01UN419EZB(0)

Getting Started ................................ 3

Installing Your Phone .................................3

Getting to Know Your Phone ...................4

Using the Handset Menu ..........................6

Using Your Phone ............................. 8

Using the Phonebook .............................. 10

Using Special Features .................. 11

Silent Mode ..................................................11

Multihandset Features .............................11

Chain Dialing ...............................................13

Voice Message Notication ....................13

Important Information .................. 14

Solving Problems .......................................14

Resetting Handsets .................................. 16

Registering Handsets .............................. 16

Adapter and Battery Information ....... 16

Compliance Information .........................17

1-Year Limited Warranty ..........................19

Important Safety Instructions!

Whenusingyourtelephoneequipment,basicsafetyprecautionsshould

alwaysbefollowedtoreducetheriskoffire,electricshockandinjuryto

persons,includingthefollowing:

• This unit is NOT waterproof.DONOTexposeittorainormoisture.

• Donotusethisproductnearwater,forexample,nearabathtub,

washbowl,kitchensinkorlaundrytub,inawetbasementorneara

swimmingpool.

• Avoidusingatelephone(otherthanacordlesstype)duringanelectrical

storm.Theremaybearemoteriskofelectricshockfromlightning.

• Donotusethetelephonetoreportagasleakinthevicinityoftheleak.

• Useonlythepowercordandbatteriesindicatedinthismanual.Donot

disposeofbatteriesinafire.Theymayexplode.Checkwithlocalcodes

forpossiblespecialdisposalinstructions.

• Donotplacethehandsetinanychargingcradlewithoutthebattery

installedandthebatterycoversecurelyinplace.

SAVE THESE INSTRUCTIONS!

CAUTION! Risk of explosion if battery is replaced by an incorrect type!

Dispose of used batteries according to the instructions. Do not open or

mutilate the battery. Disconnect the battery before shipping this product.

Formoredetails,seetheImportant Informationsection.

What’s in the manual?

Installing Your Phone

Charge the Battery

1. Unpackallhandsets,

battery

packs,and

battery

covers.If

youneedto

removea

cover,pressinonthenotchand

slidethecoverdownandoff.

2. Lineupthebatteryconnector

withthejackinsidethehandset;

theconnectoronlyfitsoneway.

3. Pushtheconnectorinuntil

itclicksintoplace;tuggently

onthewirestomakesurethe

batteryissecurelyconnected.

4. Replacethebatterycoverand

slideitintoplace.

5. UseanACadaptertoconnect

thepowerjackonthebasetoa

regularindoor(120VAC)power

outlet.Connectanychargersthe

sameway.

6. Placeahandsetinthebasewith

thedisplayfacingforward.If

thedisplaydoesn’tlightup,

reseatthehandsetorconnect

thebasetoadifferentoutlet.For

2ormorehandsets,placeeach

handsetinacharger.

# Charge all handsets

completely (about 15 hours)

before using.

Connect the Telephone Cord

Usethetelephonecordtoconnect

the

TEL LINE

jackonthebasetoa

standardtelephonewalljack.

Test the Connection

1. Pickupthehandsetandpress

Talk

.Thehandsetsoundsadial

tone,andthedisplayshows

Talk

.

– If you don't hear a dial tone or

the display says

Check Tel Line,

check the connection between

the base and the phone jack.

2. Makeaquicktestcall.(Press

End



tohangup.)

– If you keep hearing a dial tone,

change to pulse dialing.

– If there’s a lot of noise, check

for interference (see p. 15).

3. Testallhandsetsthesameway.

Ifyoucan'tgetadialtone,move

thehandsetclosertothebase.

Changing to Pulse Dialing

Yourphoneusestonedialingby

default.Ifyourphonecompanyuses

pulsedialing,youneedtochange

yourphone’sdialmode.

1. Onahandset,press

MEnu/sElEcT



andchoose

Global Setup

2. Select

Dial Mode

then

Pulse

.

You’llhearaconfirmationtone.

TosendDTMFtonesduringacall

(e.g.,foranautomatedresponse

system),press

totemporarily

switchtotonedialing.Whenyou

hangup,thephoneautomatically

returnstopulsedialing.

GETTING STARTED

Getting to Know Your Phone

Parts of the Base

Charging

Contacts

Find

Handset

Key (icon) What it does

Find hs

• In standby: page all handsets.

Parts of the Handset

Twelve-key

dial pad

PHONEBOOK

SPEAKER

DOWN

CID

REDIAL/PAUSE

MESSAGE/MUTE

INTERCOM/CLEAR

END

TALK/FLASH

MENU/SELECT

Charging

contacts

Microphone

Key (icon) What it does

PhonEbook

( )

• In standby or during a call: open the phonebook.

• In the menu: go back to the previous screen.

• When entering text: move the cursor to the left.

sPEakEr

( )

• Switch a normal call to the speakerphone (and back).

Talk/Flash

• In standby: start a telephone call (get a dial tone).

• During a call: switch to a waiting call.

down

( )

• In standby: decrease the ringer volume.

• During a call: decrease the audio volume.

• In any menu or list: move the cursor down one line.

rEdial/PausE

• In standby: open the redial list.

• When entering a phone number: insert a 2-second pause.

MEssagE/

MuTE

( )

• In standby: access your voice mail.

• During a call: mute the microphone.

• While the phone is ringing: ignore this call (mute the ringer).

inTErcoM/

clEar

• In standby: start an intercom call.

• During a call: put the call on hold and start a call transfer.

• When entering text or numbers: erase the character at the

cursor (press & hold to erase all characters).

callEr id

( )

• In standby: or during a call: open the Caller ID list.

• When entering text: move the cursor to the right.

End

• During a call: hang up.

• In the menu or any list: exit and go to standby.

MEnu/sElEcT

• In standby: open the menu.

• In the menu or any list: select the highlighted item.

( )

• In standby: increase the ringer volume.

• During a call: increase the audio volume.

• In any menu or list: move the cursor up one line.

LED What it means

sTaTus

• On: the battery is charging.

• Blinking: there are new messages.

Reading the Display

Thetableshowsthepossible

statusicons&whattheymean.

Sincetheiconsappearbased

onwhatthephoneisdoing,

youwon'tseealltheiconsat

thesametime.

Icon What it means

The signal from the base is 1) strong or 2) weak.

The ringer is turned off and will not ring for new calls.

The speakerphone is on.

Privacy Mode is on: no other handset can join the call.

T-coil mode is on (see p. 7).

The battery is 1) full, 2) half charged, 3) getting low or 4) empty.

The handset is using ECO (power save) mode.

Indicates you have a new voice mail.

[Aa] [aA]

Enter 1) capital or 2) lower case letters (see p. 8).

Using the Handset Menu

Ifyoudon'tpressanykeysforabout30

seconds,thehandset

exitsthemenu.

Duringacall,use

PhonEbook

toback

outofthe

menuwithout

hangingup.



NEW

Status

icons

Current

call info

Time &

date

CID

record

status

Handset Setup

Personal Ring

Handset Setup

Ringer Tones

Handset Setup

T-coil

Handset Setup

Date & Time

Use

and

DOWN

rotate through the

options.

Press

MENU/SELECT

open the menu.

Press

MENU/SELECT

to choose

the current option.

Press

PHONEBOOK

go back a screen

press

END

to exit

the menu.

Handset Setup

Youcanchangethesesettingsseparatelyforeachhandset.

T-coil

Turn on T-coil mode to reduce noise on hearing aids

equipped with a telecoil (T-coil) feature. T-coil mode

shortens talk time, so keep your battery fully charged.

Ringer Tones

Choose this handset's ring tone. As you highlight each

ring tone, the phone plays a sample. When you hear

the tone you want, press

MEnu/sElEcT

Personal Ring

Turn on personal ring so you can assign a special ring

tone to people in your phonebook. With Caller ID, this

handset uses the assigned tone when the person calls.

AutoTalk

Have this handset answer a call when you pick it up

from the cradle (without pressing any buttons).

Any Key Answer

Have this handset answer a call when you press any

key on the 12-key dialpad.

Banner

Change the name used on the handset's display.

Handset Language

Change the display language.

Key Touch Tone

Have the keypad sound a tone when you press a key.

Date & Time

Usethismenutosettheclock.Enterthedateandtime(MM/DD/YY);

select

or

.Use

cid

tomovethecursorpastadigitwithoutchanging

it.IfyouhaveCIDservice,youcansetittoprovidethetime(

Global Setup/

Time Adjustment

Global Setup

Thesettingsonthismenuaffectallhandsets.Onlyonehandsetatatime

canchangethesemenuoptions.

Dial Mode

Choose tone or pulse dialing (see p. 3).

Edit Voice Mail

Edit your voice mail access number (see page 14).

Set Line Mode

Do not change this setting unless instructed to by

customer service.

Voice Mail Tone

Turn the tone indicating a new voice mail on or off.

VMWI Reset

Reset the Voice Message Waiting Indicator (see p. 13).

Time Adjustment

Select

Set by Caller ID

to allow phone network to

automatically set cordless phone system time.

Entering Text on Your Phone

• Usethe12-keydialpadanytimeyouwanttoentertextintoyourphone

(anameinthephonebook,thehandsetbanner,etc.).

• Iftwolettersinarowusethesamekey,enterthefirstletter;waitforthe

cursortomovetothenextspaceandenterthesecondletter.

To... Press...

move the cursor left

PhonEbook

move the cursor right

cid

erase the character at the cursor

inTErcoM/clEar

erase the entire entry and hold

inTErcoM/clEar

enter a blank space

switch between upper and lower case letters

rotate through the punctuation and symbols

USING YOUR PHONE

Thissectionexplainsthemostcommonfunctionsonthephone.

To...

Using the

earpiece

Using the

speakerphone

make a call, dial the number & press

Talk/Flash

. press

sPEakEr

answer a call press

Talk/Flash

. press

sPEakEr

hang up press

End

or put the handset in the cradle.

ignore a call/mute the ringer

press

MEssagE/MuTE

while the phone is

ringing.

switch to the speaker & back press

sPEakEr

mute the microphone during

a call

press

MEssagE/MuTE

(press again to turn the

microphone back on).

put a call on hold press

inTErcoM/clEar*

return to a call on hold press

Talk/Flash

. press

sPEakEr

make a speed dial call

press and hold the speed dial number

for 1.5 seconds. After you verify that the

system is displaying the correct phonebook

data for that speed dial number, press

Talk/

Flash

sPEakEr

on the handset.

* Aer5minutesonhold,thecallwillbedisconnected.

Assigning a Speed Dial Number

Youcanassignaspeeddialnumbertoaphonebookentrywhenyoucreate

thatentryforthefirsttime(orwhenyoueditit).Press

PhonEbook

and

select

Create New

.Asyouenterthephonebooknumber,oneoftheoptions

youwillseeistoassignaspeeddialnumbertothatphonebookentry.You

canassignupto10speeddials,0-9.

Finding a Lost Handset

Withthephoneinstandby,press

Find hs

onthebase.Allhandsetsbeepfor

1minute;tocancel,press

Find hs

againorpressanyhandsetkey.

Changing the Volume

To change the... When... Press...

earpiece or speaker

volume for each handset

you are listening to that

earpiece or speaker (playing

messages, etc.)

to increase

the volume.

down

decrease it.

ringer volume for each

handset*

the phone is in standby

* Ifyouturntheringerallthewaydown,thatparticularringerturnso.

Using the Caller ID and Redial Lists

CallerID(CID)isaserviceavailablefromyourtelephoneproviderthat

showsthephonenumber(andsometimesthecaller’sname)ofincoming

calls.Contactyourtelephoneproviderformoreinformation.

Caller ID list Redial list

• The phone saves the information for the last 50

received calls to the CID list. The

NEW

icon marks any

calls received since the last time you checked the list.

• All handsets share the same CID list so only one

handset can access the list at a time.

• In standby, handsets show how many calls came in

since the last time you checked the CID list.

• Each handset

remembers the

last 5 numbers

you dialed on it.

• Only one handset

can access its

redial list at a time.

To… Press...

open the CID list

cid

open the redial list

rEdial/PausE

scroll through the

lists

down

to scroll from newest to oldest.

to scroll from oldest to newest.

To… Press...

dial the

highlighted

number

Talk/Flash

sPEakEr.

(If the number is a toll call but there is no 1 at the

beginning, press

to add 1 before dialing.)

close the lists

PhonEbook

Forindividualrecordoptions,highlightanumberandpress

MEnu/sElEcT

:

Delete Entry

Erase the number from the list.

Store Into Pb

Add the number to the phonebook. The handset prompts

you to edit the name and number and select a personal ring.

Delete All

(CID list only) Erase all numbers from the list.

Using Call Waiting

• CallWaiting,aserviceavailablefromyourtelephoneprovider,letsyou

receivecallswhileyouareonanothercall.CallerIDonCallWaiting

(CIDCW)servicedisplaysCallerIDinformationforawaitingcall.

• IfyougetaCallWaitingcall,thephonesoundsatoneanddisplays

anyCIDinformationreceivedfromthewaitingcall.Press

Talk/Flash



toswitchbetweenthecurrentcallandthewaitingcall;eachtimeyou

switch,thereisashortpausebeforeyou'reconnectedtotheothercall.

Using the Phonebook

Thephonecanstoreupto100entriesinitsphonebook.Allhandsetsshare

thesamephonebook,soonlyonehandsetcanaccessitatatime.

To... Press...

open/close the phonebook

PhonEbook

scroll through the entries

down

to scroll through the entries from A to Z.

to scroll from Z to A.

jump to entries that start

with a certain letter

the number key corresponding to the letter

you want.

dial the current entry

Talk/Flash

sPEakEr

edit the current entry

MEnu/sElEcT

, then select

Edit

delete the current entry

MEnu/sElEcT

, then select

Delete

. When the

phone prompts you to confirm, select

Yes

make a speed dial call

Press and hold the speed dial number (0 - 9)

for 1.5 seconds. The speed dial entry displays.

Press

Talk

sPEakEr

to dial the number.

Adding Phonebook Entries

Withthephoneinstandby,openthephonebook.Press

MEnu/sElEcT

and

select

Create New.

Enteraname,number,andthenassignaspeeddial

numberandapersonalringifdesired.

• Enterthephonenumber(upto20digits)exactlyasyouwoulddialit.

• Ifyouneedthephonetowaitbeforesendingthenextsetofdigits,press

rEdial/PausE

toinserta2-secondpause.Youcaninsertmultiplepauses,

buteachonecountsasadigit(you’llsee

inthedisplay).

Deleting All the Phonebook Entries

Withthephoneinstandby,openthephonebook.Press

MEnu/sElEcT

and

select

Delete All

.Whenthephonepromptsyoutoconfirm,select

Yes

.

USING SPECIAL FEATURES

Silent Mode

Youcansilencetheringersonthebaseandallhandsetsforaspecific

periodoftime.

1. Withthephoneinstandby,pressandhold

onanyhandset.Thephone

promptsyoutoselectthenumberofhours(

-

or

Always On

)thatyou

wantittostayinsilentmode.

2. Toconfirm,press

orjustwaitabout5seconds.Thephoneturnsonthe

answeringsystemanddisplays

Silent Mode On

oneachhandset.

3. Aftertheselectednumberofhours,thephoneautomaticallyexitssilent

mode.Toexitsilentmodemanually,pressandhold

again.

Multihandset Features

# To use the features in this section, you need at least 2 handsets.

• Yourbasesupportsatotalof12cordlesshandsets:theonethatcame

withthebaseandupto11DCX170accessoryhandsets.Yourbasealso

supportsatotalof2DRX100rangeextenders,includinganythatcame

withyourphone.IfyouhaveanyDWXhandsets,theD1760islimitedto

atotalof6accessoryhandsets.

• Youmustregisteraccessoryhandsetstothebasebeforeusingthem.

(Handsetsthatcamepackagedwiththebasearealreadyregistered.)

• Handsetsthataren’tregistereddisplayaNot Registeredmessage.For

registrationinstructions,seep.16,orseetheaccessoryhandsetmanual.

• Ifahandsetwaseverregisteredtoabase,youmustresetitbeforeitcan

Conference Calling

• Whenanoutsidecallcomesin,twohandsetscanjoininaconference

callwiththeoutsidecaller.

• Tojoinacallthat’salreadyinprogress,justpress

Talk/Flash

or

sPEakEr

.

• Toleavetheconferencecall,hangupnormally;theotherhandset

remainsconnectedtothecall.

Call Transfer

To... Press...

transfer a call

inTErcoM/clEar

. The phone puts the call on hold and

prompts you to select the handset you want to page.

When the other handset accepts the call, you'll be

disconnected (press

Talk/Flash

to rejoin the call).

cancel a transfer

Talk/Flash

to return to the call.

accept a

transferred call

inTErcoM/clEar

to answer the page and speak to the other

handset. Then, press

Talk/Flash

to speak to the caller.

Privacy Mode

Toactivateprivacymodeonacallinprogress,press

MEnu/sElEcT

twice.

Aslongasprivacymodeison,you'llseea inthedisplay,andnoother

handsetscanjoinyourcall.Privacymodeturnsoffautomaticallywhen

youhangup;youcanalsoturnitoffbypressing

MEnu/sElEcT

twice.

Handset to Handset Intercom

• Wheneverthephoneisinstandby,youcanmakeanintercomcall

betweenhandsetswithoutusingthephoneline.

• Youcanmakeanintercomcallfromanyhandset,butonlytwohandsets

canbeinanintercomcallatanytime.

• Ifanoutsidecallcomesinduringanintercompage,thephonecancels

thepagesoyoucananswertheincomingcall.

• Ifanoutsidecallcomesinduringanintercomcall,press

Talk/Flash

to

hanguptheintercomcallandanswertheoutsidecall.

To... Press...

make an intercom

page

inTErcoM/clEar.

Select the handset you want to talk

with, or

All

to page all handsets at the same time.

To... Press...

cancel a page

End

answer a page

inTErcoM/clEar

Talk/Flash

end an intercom call

End

. Both handsets return to standby.

Chain Dialing

Ifyouoftenhavetoenteraseriesofdigitsoracodenumberduringa

call,youcansavethatcodenumbertoaphonebookentryandusethe

phonebooktosendthecodenumber.

1. Enterthecodenumber(upto20digits)intothephonebookjustlike

aregularphonebookentry.Besuretoenterthecodenumberintothe

phonebookexactlyasyouwouldenteritduringacall.

2. Whenyouhearthepromptthattellsyoutoenterthenumber,openthe

phonebookandfindtheentrythatcontainsyourcodenumber.

3. Press

MEnu/sElEcT

tosendthecode.Ifyouchangeyourmind,justclose

thephonebook.

Voice Message Notication

Ifyousubscribetoavoicemailservice,yourphonedisplaysthevoice

mailicon( )whenyouhaveanewmessage.Thisfeaturesupports

Frequency-ShiftKeying(FSK)andStutterDialTone(SDT)notification,

whichyoucanturnonandoffthrough

Global Setup/Voice Mail Tone

.

Afteryoulistentoyourmessages,themessageiconturnsoff.Ifitdoesn’t,

youcanresetit:Withthephoneinstandby,openthemenuandselect

Global Setup

;select

VMWI Reset

,thenselect

Yes.

Setting Up Voice Mail Access

Ifyouhavevoicemailaccessthroughyourserviceprovider,youcan

programthataccessnumberintoyourphoneandthenjustpressonekey

todial-

MEssagE/MuTE

.Youwillsetupanaccesscodetoyouraccount,and

youcaneitherenterthatmanuallyafteryouhaveaccessedthevoicemail

oryoucanprogramthatintoyourphone,too.

1. Press

MEssagE/MuTE

.Ifnovoicemailaccessnumberhasbeensetup,the

systempromptsyoutodothatnow.

2. Entertheprovider’svoicemailaccessnumber.Press

MEnu/sElEcT

toset

thenumber.

3. Thescreendisplays

DONE!

4. Toaccessyourprovider’svoicemailservicenow,press

MEssagE/MuTE

.

Thesystemwilldialthevoicemailserviceandyoucanenteryour

securitycodemanuallywhenprompted.

Editing Your Voice Mail Number

Youcanaddyourvoicemailsecuritycodetothevoicemailnumberstring.

1. Press

MEnu/sElEcT

,thenscrollto

Global Setup/Edit Voice Mail

.

2. Enteryourvoicemailnumberagain,thenpress

rEdial/PausE

twiceto

enter22-secondpauses.Next,enteryoursecuritycode.

3. Press

MEnu/sElEcT

whenyouarefinished.Thesystemdisplays

DONE!

4. Toaccessyourprovider’svoicemailservicenow,justpress

MEssagE/

MuTE

.Thesystemwilldialtheaccessnumber,wait4seconds,andthen

itwilldialthesecuritycode.

IMPORTANT INFORMATION

Solving Problems

Ifyouhaveanytroublewithyourphone,checkthissectionfirst.Ifyou

needhelp,callourCustomerCareLinelistedonthefrontcover.

General problems Possible solutions

No handsets can make or

receive calls.

• Check the telephone cord connection.

• Disconnect the base AC adapter for a few

minutes; then reconnect it.

A handset can’t make or

receive calls.

• Move the handset closer to the base.

A handset can make calls,

but it won’t ring.

• Make sure the ringer is turned on.

• Make sure Silent Mode is turned off (see p. 10).

A handset is not working.

• Charge the battery for 15-20 hours.

• Check the battery connection.

The phone keeps ringing

when I answer on an

extension.

• You may have to change the line mode.

Contact Customer Service for instructions.

Audio issues Possible solutions

Callers sound

weak or soft.

• Move the handset closer to the base.

• Keep the handset’s battery fully charged.

• Increase the earpiece volume.

Audio issues Possible solutions

There’s a lot of

noise or static on

the line

• Check for interference from appliances (microwave

ovens, TVs, etc.) or wireless devices (baby monitors,

WiFi equipment, etc.). Move the handset or base away

from the interference source.

• If you use a telecoil hearing aid, turn on T-coil mode

(see p. 7).

• If you have any service that uses the phone line, add a

DSL or telephone line filter (see below).

Caller ID problems Possible solutions

No handsets display

Caller ID information.

• Let calls ring twice before answering.

• Make sure your Caller ID service is active.

Caller ID displays briefly

and then clears.

• You may have to change the line mode.

Contact Customer Service for instructions.

Multi-handset problems Possible solutions

I can’t transfer calls.

• Reset the handset (see p. 16).

Two handsets can’t talk to a caller.

• See if any handset is in Privacy Mode.

A handset says

Unavailable

• Move the handset closer to the base.

• See if any handset is in Privacy Mode.

I can’t register a new handset.

• Reset the handset (see p. 16).

• See if you have 12 registered handsets.

Installing a Line Filter or DSL Filter

AtelephonelinelterorDSLlterpreventsservicesthatusethephonelinefrom

causinginterferenceonyourphone.Togetalinelter,contactyourservicepro-

viderorlookinanelectronicsstore.

Plugthelterintothetelephonewalljackandplugthebaseintothelter.Makea

testcalltomakesurethenoiseisgone.

Liquid Damage

CAUTION: If the base is covered in liquid, disconnect the adapter & phone

cord from the wall before touching it.

Iftheliquidisonlyontheexteriorhousingofthebaseorhandset,wipeitoand

useasnormal.Ifyoucanhearliquidinsidethehousing:

1. Removeallcompartmentcovers,anddisconnectallcablesandcords.

2. Ifliquidisleakingfromanyventorhole,turnthephonesothatventfaces

down.Ifnot,placethelargestventfacedown.

3. Letdryforatleast3days.Checkforliquidinsidethephonebeforereplacing

compartmentcovers&reconnectingcords.

Resetting Handsets

Ifyouhavetroublewithahandsetor

ifyouwanttoreplaceone,clearthe

registrationinformationfromthebase

andthehandset:

1. Press&hold

End

and

atthesame

timeuntilyouseethe

System Reset



menu.

2. Ifyoustillhavethebasethehandset

isregisteredto,select

Deregister HS

,

thenselectthehandsetyouwant

toreset.Ifyoudon’thavethatbase

anymore,select

Base Unavailable

3. Toconrm,select

Yes

.ehandset

displays

Handset not registered

.

Registering Handsets

Ifyouseea“notregistered”messageon

ahandset,youmustregisterittoabase

beforeusingit.

1. Placethehandsetinthebase;

thedisplayshouldsay

Handset

Registering

2. Waituntilthedisplaysays

Registration Complete

(about30

seconds),thenpickupthehandset

andpress

Talk/Flash

3. Ifyoudon’thearadialtoneorthe

displaysays

Registration Failed

,

chargethebatterycompletely,then

tryagain.

Adapter and Battery

Information

AC adapter

Partnumber PS-0035

Inputvoltage 120VAC,60Hz

Outputvoltage 8VAC@300mA

x UseonlythesuppliedACadapters.

x Usetheproperadapterforthebase&

anychargers.

x Donotplacetheunitindirectsunlight

orsubjectittohightemperatures.

Battery pack (with normal use)

Partnumber BT-1021

Capacity 300mAh,2.4VDC

Talktime about7hours

Standbytime about7days

Batterylife about1year

x Replacethebatterywhenthetalkor

standbytimebecomesnoticeablyre-

duced.Forreplacements,calltheParts

Department(seethefrontcover).

x Whenthebatterygetslow,thehandset

beepsandshowsalowbatteryalert;put

thehandsetinthecradleforrecharg-

ing.

Rechargeable Battery Warning

x isequipmentcontainsarecharge-

ableNickel-Metal-Hydride(Ni-MH)

battery.

x Nickelisachemicalknowntothestate

ofCaliforniatocausecancer.

x Donotshort-circuitthebattery.

x ebatteriesinthisequipmentmay

explodeifdisposedofinare.

x Donotchargethebatteriesinanychar-

gerotherthantheonespeciedinthe

owner'smanual.Usinganothercharger

maydamagethebatteryorcauseitto

explode.

x Aspartofourcommitmentto

protectingour

environmentand

conservingnatural

resources,Uniden

voluntarilyparticipates

inanRBRC®industry

programtocollectand

recycleusedNi-MHbatterieswithin

theUnitedStates.Pleasecall

1-800-8-BATTERYforinformationon

Ni-MHbatteryrecyclinginyourarea.

(RBRC®isaregisteredtrademarkofthe

RechargeableBatteryRecycling

Corporation.)

Rechargeable batteries must be

recycled or disposed of properly.

Warning! The cords on this

product and/or accessories contain

lead, a chemical known to the

state of California to cause birth

defects or other reproductive

harm. Wash hands after handling.

Uniden works to reduce lead

content in our products &

accessories.

Compliance Information

FCC Part 68 Information

isequipmentcomplieswithPart

68oftheFCCrulesandtherequire-

mentsadoptedbytheACTA.Onthe

bottomofthisequipmentisalabelthat

contains,amongotherinformation,

aproductidentierintheformatUS:

AAAEQ##TXXXX.Ifrequested,this

numbermustbeprovidedtothephone

company.

AnapplicableUniversalService

OrderCodes(USOC)certicationfor

thejacksusedinthisequipmentis

provided(i.e.,RJ11C)inthepackaging

witheachpieceofapprovedterminal

equipment.Aplugandjackusedto

connectthisequipmenttothepremises

wiringandtelephonenetworkmust

complywiththeapplicableFCCPart

68rulesandrequirementsadoptedby

theACTA.Acomplianttelephonecord

andmodularplugisprovidedwith

thisproduct.Itisdesignedtobecon-

nectedtoacompatiblemodularjack

thatisalsocompliant.Seeinstallation

instructionsfordetails.

eRENisusedtodeterminethe

numberofdevicesthatmaybecon-

nectedtoaphoneline.ExcessiveRENs

onaphonelinemayresultindevices

notringinginresponsetoanincom-

ingcall.Inmostbutnotallareas,the

sumofRENsshouldnotexceedve

(5.0).Tobecertainofthenumberof

devicesthatmaybeconnectedtoa

line,asdeterminedbythetotalRENs,

contactthetelephoneprovider.e

RENforthisproductispartofthe

productidentierthathastheformat

US:AAAEQ##TXXXX.edigitsrep-

resentedby##aretheRENwithouta

decimalpoint(e.g.,03isaRENof0.3).

Ifthisequipmentcausesharmtothe

telephonenetwork,thetelephonecom-

panywillnotifyyouinadvancethat

temporarydiscontinuanceofservice

mayberequired.Butifadvancenotice

isn'tpractical,thetelephonecompany

willnotifythecustomerassoonaspos-

sible.Also,youwillbeadvisedofyour

righttoleacomplaintwiththeFCC

ifyoubelieveitisnecessary.etele-

phonecompanymaymakechangesin

itsfacilities,equipment,operationsor

proceduresthatcouldaecttheopera-

tionoftheequipment.Ifthishappens

thetelephonecompanywillprovide

advancenoticeinorderforyoutomake

necessarymodicationstomaintain

uninterruptedservice.

Pleasefollowinstructionsforrepair-

ing,ifany(e.g.batteryreplacement

section);otherwisedonotsubstituteor

repairanypartsofthedeviceexceptas

speciedinthismanual.Connection

topartylineserviceissubjecttostate

taris.Contactthestatepublicutility

commission,publicservicecommis-

sionorcorporationcommissionfor

information.isequipmentishearing

aidcompatible.

Ifyouexperiencetroublewiththis

equipment,contactthemanufac-

turer(seethecoverofthismanualfor

contactinformation)oranauthorized

agent.Iftheequipmentiscausingharm

tothetelephonenetwork,thetelephone

companymayrequestthatyoudiscon-

necttheequipmentuntiltheproblem

isresolved.

Ifyourhomehaswiredalarmequip-

mentconnectedtoaphoneline,besure

thatinstallingthesystemdoesnotdis-

ableyouralarmequipment.Ifyouhave

questionsaboutwhatwilldisablealarm

equipment,contactyourtelephone

companyoraqualiedinstaller.

Anychangesormodicationstothis

productnotexpresslyapprovedbythe

manufacturerorotherpartyrespon-

sibleforcompliancecouldvoidyour

authoritytooperatethisproduct.

NOTICE:Accordingtotelephonecom-

panyreports,ACelectricalsurges,typi-

callyresultingfromlightningstrikes,

areverydestructivetotelephone

equipmentconnectedtoACpower

sources.Tominimizedamagefrom

thesetypesofsurges,asurgearrestoris

recommended.

FCC Part 15 Information

isdevicecomplieswithpart15of

theFCCrules.Operationissubjectto

thefollowingtwoconditions:(1)is

devicemaynotcauseharmfulinterfer-

ence,and(2)isdevicemustaccept

anyinterferencereceived,including

interferencethatmaycauseundesired

operation.Privacyofcommunications

maynotbeensuredwhenusingthis

phone.

FCC PART 15.105(b):Note:is

equipmenthasbeentestedandfound

tocomplywiththelimitsforaClass

Bdigitaldevice,pursuanttopart15

oftheFCCRules.eselimitsare

designedtoprovidereasonableprotec-

tionagainstharmfulinterferenceina

residentialinstallation.isequip-

mentgenerates,usesandcanradiate

radiofrequencyenergyand,ifnot

installedandusedinaccordancewith

theinstructions,maycauseharmful

interferencetoradiocommunications.

However,thereisnoguaranteethat

interferencewillnotoccurinaparticu-

larinstallation.Ifthisequipmentdoes

causeharmfulinterferencetoradio

ortelevisionreception,whichcanbe

determinedbyturningtheequipment

oandon,theuserisencouragedto

trytocorrecttheinterferencebyoneor

moreofthefollowingmeasures:

x Reorientorrelocatethereceiving

antenna.

x Increasetheseparationbetweenthe

equipmentandreceiver.

x Connecttheequipmentintoanoutlet

onacircuitdierentfromthattowhich

thereceiverisconnected.

x Consultthedealeroranexperienced

radio/TVtechnicianforhelp.

FCC RF Exposure Information

isproductcomplieswithFCCradia-

tionexposurelimitsunderthefollow-

ingconditions:

x ebasemustbeplacedtoallowa

minimumof20cm(8inches)between

theantennaandallpersonsduring

normaloperation.

x ebasemustnotbecollocatedor

operatedinconjunctionwithanyother

antennaortransmitter.

x ehandsetisdesignedforbody-worn

operationandmeetsFCCRFexposure

guidelineswhenusedwithanybeltclip,

carryingcase,orotheraccessorysup-

pliedwiththisproduct.(Allnecessary

accessoriesareincludedinthepackage;

anyadditionaloroptionalaccessories

arenotrequiredforcompliancewith

theguidelines.)irdpartyaccessories

(unlessapprovedbythemanufacturer)

shouldbeavoidedasthesemight

notcomplywithFCCRFexposure

guidelines.

Industry Canada (I.C.) Notice

Terminal equipment

NOTICE:isequipmentmeetsthe

applicableIndustryCanadaTerminal

EquipmentTechnicalSpecications.

isisconrmedbytheregistration

number.eabbreviationICbefore

theregistrationnumbersigniesthat

registrationwasperformedbasedona

DeclarationofConformityindicat-

ingthatIndustryCanadatechnical

specicationsweremet.Itdoesnot

implythatIndustryCanadaapproved

theequipment.

NOTICE:eRingerEquivalence

Number(REN)forthisterminalequip-

mentismarkedontheequipmentitself.

eRENassignedtoeachterminal

equipmentprovidesanindicationof

themaximumnumberofterminals

allowedtobeconnectedtoatelephone

interface.eterminationonaninter-

facemayconsistofanycombinationof

devicessubjectonlytotherequirement

thatthesumoftheRingerEquivalence

Numbersofallthedevicesdoesnot

exceed5.

Radio equipment

etermICbeforetheradiocerti-

cationnumberonlysigniesthat

IndustryCanadatechnicalspecica-

tionsweremet.Operationissubject

tothefollowingtwoconditions:(1)

thisdevicemaynotcauseinterference,

and(2)thisdevicemustacceptany

interference,includinginterference

thatmaycauseundesiredoperationof

thedevice."Privacyofcommunications

maynotbeensuredwhenusingthis

telephone".

1-Year Limited Warranty

Evidence of original purchase is

required for warranty service.

WARRANTOR:UNIDENAMERICA

CORPORATION("Uniden")

ELEMENTSOFWARRANTY:Uniden

warrants,foroneyear,totheoriginal

retailowner,thisUnidenProductto

befreefromdefectsinmaterialsand

crasmanshipwithonlythelimitations

orexclusionssetoutbelow.

WARRANTYDURATION:is

warrantytotheoriginalusershall

terminateandbeofnofurthereect

12monthsaerthedateoforiginal

retailsale.ewarrantyisinvalidif

theProductis(A)damagedornot

maintainedasreasonableornecessary,

(B)modied,altered,orusedaspartof

anyconversionkits,subassemblies,or

anycongurationsnotsoldbyUniden,

(C)improperlyinstalled,(D)serviced

orrepairedbysomeoneotherthanan

authorizedUnidenservicecenterfora

defectormalfunctioncoveredbythis

warranty,(E)usedinanyconjunction

withequipmentorpartsoraspartof

anysystemnotmanufacturedbyUn-

iden,or(F)installedorprogrammed

byanyoneotherthanasdetailedbythe

owner'smanualforthisproduct.

STATEMENTOFREMEDY:In

theeventthattheproductdoesnot

conformtothiswarrantyatanytime

whilethiswarrantyisineect,warran-

torwilleither,atitsoption,repairor

replacethedefectiveunitandreturnit

toyouwithoutchargeforparts,service,

oranyothercost(exceptshippingand

handling)incurredbywarrantororits

representativesinconnectionwiththe

performanceofthiswarranty.Warran-

tor,atitsoption,mayreplacetheunit

withaneworrefurbishedunit.THE

LIMITEDWARRANTYSETFORTH

ABOVEISTHESOLEANDENTIRE

WARRANTYPERTAININGTOTHE

PRODUCTANDISINLIEUOFAND

EXCLUDESALLOTHERWARRAN-

TIESOFANYNATUREWHATSO-

EVER,WHETHEREXPRESS,IM-

PLIEDORARISINGBYOPERATION

OFLAW,INCLUDING,BUTNOT

LIMITEDTOANYIMPLIEDWAR-

RANTIESOFMERCHANTABILITY

ORFITNESSFORAPARTICULAR

PURPOSE.THISWARRANTYDOES

NOTCOVERORPROVIDEFORTHE

REIMBURSEMENTORPAYMENT

OFINCIDENTALORCONSEQUEN-

TIALDAMAGES.Somestatesdonot

allowthisexclusionorlimitationof

incidentalorconsequentialdamagesso

theabovelimitationorexclusionmay

notapplytoyou.

LEGALREMEDIES:iswarranty

givesyouspeciclegalrights,and

youmayalsohaveotherrightswhich

varyfromstatetostate.iswarranty

isvoidoutsidetheUnitedStatesof

AmericaandCanada.

PROCEDUREFOROBTAINING

PERFORMANCEOFWARRANTY:

If,aerfollowingtheinstructionsin

theowner'smanualyouarecertain

thattheProductisdefective,pack

theProductcarefully(preferablyin

itsoriginalpackaging).Disconnect

thebatteryfromtheProductand

separatelysecurethebatteryinits

ownseparatepackagingwithinthe

shippingcarton.eProductshould

includeallpartsandaccessories

originallypackagedwiththeProduct.

Includeevidenceoforiginalpurchase

andanotedescribingthedefectthat

hascausedyoutoreturnit.eProd-

uctshouldbeshippedfreightprepaid,

bytraceablemeans,towarrantorat:

UnidenAmericaService

4700AmonCarterBlvd.

FortWorth,TX76155

AsanEnergyStar

Partner,

Unidenhasdetermined

thatthisproductmeetsthe

EnergyStar

guidelinesfor

energyeciency.Energy

Star

isaU.S.registeredmark.

x Uniden

isaregisteredtrademarkof

UnidenAmericaCorporation.

x epicturesinthismanualarefor

exampleonly.Yourphonemaynot

lookexactlylikethepictures.

Minimum size: 0.375 in wide (9.525 mm)

Minimum drawing size (with clear space) = 0.555 in (14.1 mm) wide

Uniden D1760-6 User manual

Brand: Uniden

Model: D1760-6

Category: Telephones

Type: User manual

Download PDF

report

Uniden D1760-6 User manual

Uniden D1760-6 User manual

Related papers

Other documents