Uniden D1760-12 User manual

Category
Telephones
Type
User manual
D1760 base
with cordless
handset
Battery
cover
Accessory handset
and charger
If you purchased
model number:
You should
have:
D1760 None
D1760-2 1 of each
...
...
D1760-11 10 of each
D1760-12 11 of each
* If the model number ends in R,
your package includes a DRX100
range extender. Refer to the
DRX100 owner’s manual for details.
You will also nd:
Not pictured:
• Rechargeable
battery (BT-1021)
• AC adapter (PS-0035)
• Telephone cord
• Ifanyitemsaremissingordamaged,contactourCustomerCareLine
immediately.Neverusedamagedproducts!
• Needhelp?Getanswers24/7atourwebsite: www.uniden.com.
If You... Contact Uniden’s... Phone Number
have a question or problem Customer Care Line*
817-858-2929 or
800-297-1023
need a replacement part or an
accessory
Parts Department* 800-554-3988
need special assistance due to
a disability
Accessibility Help Line
800-874-9314
(voice or TTY)
* Duringregularbusinesshours,CentralStandardTime;seeourwebsiteforde-
tailedbusinesshours.
D1760 Series User's Guide
What's in the box?
Not pictured:
• Rechargeable
battery (BT-1021)
• Battery cover
• AC adapter
(PS-0035)
© 2012 Uniden America Corp. Printed in Vietnam
Ft. Worth, Texas U01UN419EZB(0)
2
Getting Started ................................ 3
Installing Your Phone .................................3
Getting to Know Your Phone ...................4
Using the Handset Menu ..........................6
Using Your Phone ............................. 8
Using the Phonebook .............................. 10
Using Special Features .................. 11
Silent Mode ..................................................11
Multihandset Features .............................11
Chain Dialing ...............................................13
Voice Message Notication ....................13
Important Information .................. 14
Solving Problems .......................................14
Resetting Handsets .................................. 16
Registering Handsets .............................. 16
Adapter and Battery Information ....... 16
Compliance Information .........................17
1-Year Limited Warranty ..........................19
Important Safety Instructions!
Whenusingyourtelephoneequipment,basicsafetyprecautionsshould
alwaysbefollowedtoreducetheriskoffire,electricshockandinjuryto
persons,includingthefollowing:
• This unit is NOT waterproof.DONOTexposeittorainormoisture.
• Donotusethisproductnearwater,forexample,nearabathtub,
washbowl,kitchensinkorlaundrytub,inawetbasementorneara
swimmingpool.
• Avoidusingatelephone(otherthanacordlesstype)duringanelectrical
storm.Theremaybearemoteriskofelectricshockfromlightning.
• Donotusethetelephonetoreportagasleakinthevicinityoftheleak.
• Useonlythepowercordandbatteriesindicatedinthismanual.Donot
disposeofbatteriesinafire.Theymayexplode.Checkwithlocalcodes
forpossiblespecialdisposalinstructions.
• Donotplacethehandsetinanychargingcradlewithoutthebattery
installedandthebatterycoversecurelyinplace.
SAVE THESE INSTRUCTIONS!
CAUTION! Risk of explosion if battery is replaced by an incorrect type!
Dispose of used batteries according to the instructions. Do not open or
mutilate the battery. Disconnect the battery before shipping this product.
Formoredetails,seetheImportant Informationsection.
What’s in the manual?
3
Installing Your Phone
Charge the Battery
1. Unpackallhandsets,
battery
packs,and
battery
covers.If
youneedto
removea
cover,pressinonthenotchand
slidethecoverdownandoff.
2. Lineupthebatteryconnector
withthejackinsidethehandset;
theconnectoronlyfitsoneway.
3. Pushtheconnectorinuntil
itclicksintoplace;tuggently
onthewirestomakesurethe
batteryissecurelyconnected.
4. Replacethebatterycoverand
slideitintoplace.
5. UseanACadaptertoconnect
thepowerjackonthebasetoa
regularindoor(120VAC)power
outlet.Connectanychargersthe
sameway.
6. Placeahandsetinthebasewith
thedisplayfacingforward.If
thedisplaydoesn’tlightup,
reseatthehandsetorconnect
thebasetoadifferentoutlet.For
2ormorehandsets,placeeach
handsetinacharger.
# Charge all handsets
completely (about 15 hours)
before using.
Connect the Telephone Cord
Usethetelephonecordtoconnect
the
TEL LINE
jackonthebasetoa
standardtelephonewalljack.
Test the Connection
1. Pickupthehandsetandpress
Talk
.Thehandsetsoundsadial
tone,andthedisplayshows
Talk
.
– If you don't hear a dial tone or
the display says
Check Tel Line,
check the connection between
the base and the phone jack.
2. Makeaquicktestcall.(Press
End
tohangup.)
– If you keep hearing a dial tone,
change to pulse dialing.
– If there’s a lot of noise, check
for interference (see p. 15).
3. Testallhandsetsthesameway.
Ifyoucan'tgetadialtone,move
thehandsetclosertothebase.
Changing to Pulse Dialing
Yourphoneusestonedialingby
default.Ifyourphonecompanyuses
pulsedialing,youneedtochange
yourphonesdialmode.
1. Onahandset,press
MEnu/sElEcT
andchoose
Global Setup
.
2. Select
Dial Mode
then
Pulse
.
You’llhearaconfirmationtone.
TosendDTMFtonesduringacall
(e.g.,foranautomatedresponse
system),press
*
totemporarily
switchtotonedialing.Whenyou
hangup,thephoneautomatically
returnstopulsedialing.
GETTING STARTED
4
Getting to Know Your Phone
Parts of the Base
Charging
Contacts
Find
Handset
Key (icon) What it does
Find hs
• In standby: page all handsets.
Parts of the Handset
Twelve-key
dial pad
UP
PHONEBOOK
SPEAKER
DOWN
CID
REDIAL/PAUSE
MESSAGE/MUTE
INTERCOM/CLEAR
END
TALK/FLASH
MENU/SELECT
Charging
contacts
Microphone
5
Key (icon) What it does
PhonEbook
( )
• In standby or during a call: open the phonebook.
• In the menu: go back to the previous screen.
• When entering text: move the cursor to the left.
sPEakEr
( )
• Switch a normal call to the speakerphone (and back).
Talk/Flash
• In standby: start a telephone call (get a dial tone).
• During a call: switch to a waiting call.
down
( )
• In standby: decrease the ringer volume.
• During a call: decrease the audio volume.
• In any menu or list: move the cursor down one line.
rEdial/PausE
• In standby: open the redial list.
• When entering a phone number: insert a 2-second pause.
MEssagE/
MuTE
( )
• In standby: access your voice mail.
• During a call: mute the microphone.
• While the phone is ringing: ignore this call (mute the ringer).
inTErcoM/
clEar
• In standby: start an intercom call.
• During a call: put the call on hold and start a call transfer.
• When entering text or numbers: erase the character at the
cursor (press & hold to erase all characters).
callEr id
( )
• In standby: or during a call: open the Caller ID list.
• When entering text: move the cursor to the right.
End
• During a call: hang up.
• In the menu or any list: exit and go to standby.
MEnu/sElEcT
• In standby: open the menu.
• In the menu or any list: select the highlighted item.
uP
( )
• In standby: increase the ringer volume.
• During a call: increase the audio volume.
• In any menu or list: move the cursor up one line.
LED What it means
sTaTus
• On: the battery is charging.
• Blinking: there are new messages.
6
Reading the Display
Thetableshowsthepossible
statusicons&whattheymean.
Sincetheiconsappearbased
onwhatthephoneisdoing,
youwon'tseealltheiconsat
thesametime.
Icon What it means
The signal from the base is 1) strong or 2) weak.
The ringer is turned off and will not ring for new calls.
The speakerphone is on.
Privacy Mode is on: no other handset can join the call.
T-coil mode is on (see p. 7).
The battery is 1) full, 2) half charged, 3) getting low or 4) empty.
The handset is using ECO (power save) mode.
Indicates you have a new voice mail.
[Aa] [aA]
Enter 1) capital or 2) lower case letters (see p. 8).
Using the Handset Menu
Ifyoudon'tpressanykeysforabout30
seconds,thehandset
exitsthemenu.
Duringacall,use
PhonEbook
toback
outofthe
menuwithout
hangingup.

NEW
Status
icons
Current
call info
Time &
date
CID
record
status
Handset Setup
Personal Ring
Handset Setup
Ringer Tones
Handset Setup
T-coil
Handset Setup
Date & Time
Use
UP
and
DOWN
to
rotate through the
options.
Press
MENU/SELECT
to
open the menu.
Press
MENU/SELECT
to choose
the current option.
Press
PHONEBOOK
to
go back a screen
OR
press
END
to exit
the menu.
7
Handset Setup
Menu
Youcanchangethesesettingsseparatelyforeachhandset.
T-coil
Turn on T-coil mode to reduce noise on hearing aids
equipped with a telecoil (T-coil) feature. T-coil mode
shortens talk time, so keep your battery fully charged.
Ringer Tones
Choose this handset's ring tone. As you highlight each
ring tone, the phone plays a sample. When you hear
the tone you want, press
MEnu/sElEcT
.
Personal Ring
Turn on personal ring so you can assign a special ring
tone to people in your phonebook. With Caller ID, this
handset uses the assigned tone when the person calls.
AutoTalk
Have this handset answer a call when you pick it up
from the cradle (without pressing any buttons).
Any Key Answer
Have this handset answer a call when you press any
key on the 12-key dialpad.
Banner
Change the name used on the handset's display.
Handset Language
Change the display language.
Key Touch Tone
Have the keypad sound a tone when you press a key.
Date & Time
Menu
Usethismenutosettheclock.Enterthedateandtime(MM/DD/YY);
select
AM
or
PM
.Use
cid
tomovethecursorpastadigitwithoutchanging
it.IfyouhaveCIDservice,youcansetittoprovidethetime(
Global Setup/
Time Adjustment
).
Global Setup
Menu
Thesettingsonthismenuaffectallhandsets.Onlyonehandsetatatime
canchangethesemenuoptions.
Dial Mode
Choose tone or pulse dialing (see p. 3).
Edit Voice Mail
Edit your voice mail access number (see page 14).
Set Line Mode
Do not change this setting unless instructed to by
customer service.
Voice Mail Tone
Turn the tone indicating a new voice mail on or off.
VMWI Reset
Reset the Voice Message Waiting Indicator (see p. 13).
Time Adjustment
Select
Set by Caller ID
to allow phone network to
automatically set cordless phone system time.
8
Entering Text on Your Phone
• Usethe12-keydialpadanytimeyouwanttoentertextintoyourphone
(anameinthephonebook,thehandsetbanner,etc.).
• Iftwolettersinarowusethesamekey,enterthefirstletter;waitforthe
cursortomovetothenextspaceandenterthesecondletter.
To... Press...
move the cursor left
PhonEbook
.
move the cursor right
cid
.
erase the character at the cursor
inTErcoM/clEar
.
erase the entire entry and hold
inTErcoM/clEar
.
enter a blank space
#
.
switch between upper and lower case letters
*
.
rotate through the punctuation and symbols
0
.
USING YOUR PHONE
Thissectionexplainsthemostcommonfunctionsonthephone.
To...
Using the
earpiece
Using the
speakerphone
make a call, dial the number & press
Talk/Flash
. press
sPEakEr
.
answer a call press
Talk/Flash
. press
sPEakEr
.
hang up press
End
or put the handset in the cradle.
ignore a call/mute the ringer
press
MEssagE/MuTE
while the phone is
ringing.
switch to the speaker & back press
sPEakEr
.
mute the microphone during
a call
press
MEssagE/MuTE
(press again to turn the
microphone back on).
put a call on hold press
inTErcoM/clEar*
.
return to a call on hold press
Talk/Flash
. press
sPEakEr
.
make a speed dial call
press and hold the speed dial number
for 1.5 seconds. After you verify that the
system is displaying the correct phonebook
data for that speed dial number, press
Talk/
Flash
or
sPEakEr
on the handset.
* Aer5minutesonhold,thecallwillbedisconnected.
9
Assigning a Speed Dial Number
Youcanassignaspeeddialnumbertoaphonebookentrywhenyoucreate
thatentryforthefirsttime(orwhenyoueditit).Press
PhonEbook
and
select
Create New
.Asyouenterthephonebooknumber,oneoftheoptions
youwillseeistoassignaspeeddialnumbertothatphonebookentry.You
canassignupto10speeddials,0-9.
Finding a Lost Handset
Withthephoneinstandby,press
Find hs
onthebase.Allhandsetsbeepfor
1minute;tocancel,press
Find hs
againorpressanyhandsetkey.
Changing the Volume
To change the... When... Press...
earpiece or speaker
volume for each handset
you are listening to that
earpiece or speaker (playing
messages, etc.)
uP
to increase
the volume.
down
to
decrease it.
ringer volume for each
handset*
the phone is in standby
* Ifyouturntheringerallthewaydown,thatparticularringerturnso.
Using the Caller ID and Redial Lists
CallerID(CID)isaserviceavailablefromyourtelephoneproviderthat
showsthephonenumber(andsometimesthecallersname)ofincoming
calls.Contactyourtelephoneproviderformoreinformation.
Caller ID list Redial list
• The phone saves the information for the last 50
received calls to the CID list. The
NEW
icon marks any
calls received since the last time you checked the list.
• All handsets share the same CID list so only one
handset can access the list at a time.
• In standby, handsets show how many calls came in
since the last time you checked the CID list.
• Each handset
remembers the
last 5 numbers
you dialed on it.
• Only one handset
can access its
redial list at a time.
To… Press...
open the CID list
cid
.
open the redial list
rEdial/PausE
.
scroll through the
lists
down
to scroll from newest to oldest.
uP
to scroll from oldest to newest.
10
To… Press...
dial the
highlighted
number
Talk/Flash
or
sPEakEr.
(If the number is a toll call but there is no 1 at the
beginning, press
*
to add 1 before dialing.)
close the lists
PhonEbook
.
Forindividualrecordoptions,highlightanumberandpress
MEnu/sElEcT
:
Delete Entry
Erase the number from the list.
Store Into Pb
Add the number to the phonebook. The handset prompts
you to edit the name and number and select a personal ring.
Delete All
(CID list only) Erase all numbers from the list.
Using Call Waiting
• CallWaiting,aserviceavailablefromyourtelephoneprovider,letsyou
receivecallswhileyouareonanothercall.CallerIDonCallWaiting
(CIDCW)servicedisplaysCallerIDinformationforawaitingcall.
• IfyougetaCallWaitingcall,thephonesoundsatoneanddisplays
anyCIDinformationreceivedfromthewaitingcall.Press
Talk/Flash
toswitchbetweenthecurrentcallandthewaitingcall;eachtimeyou
switch,thereisashortpausebeforeyou'reconnectedtotheothercall.
Using the Phonebook
Thephonecanstoreupto100entriesinitsphonebook.Allhandsetsshare
thesamephonebook,soonlyonehandsetcanaccessitatatime.
To... Press...
open/close the phonebook
PhonEbook
.
scroll through the entries
down
to scroll through the entries from A to Z.
uP
to scroll from Z to A.
jump to entries that start
with a certain letter
the number key corresponding to the letter
you want.
dial the current entry
Talk/Flash
or
sPEakEr
.
edit the current entry
MEnu/sElEcT
, then select
Edit
.
delete the current entry
MEnu/sElEcT
, then select
Delete
. When the
phone prompts you to confirm, select
Yes
.
make a speed dial call
Press and hold the speed dial number (0 - 9)
for 1.5 seconds. The speed dial entry displays.
Press
Talk
or
sPEakEr
to dial the number.
11
Adding Phonebook Entries
Withthephoneinstandby,openthephonebook.Press
MEnu/sElEcT
and
select
Create New.
Enteraname,number,andthenassignaspeeddial
numberandapersonalringifdesired.
• Enterthephonenumber(upto20digits)exactlyasyouwoulddialit.
• Ifyouneedthephonetowaitbeforesendingthenextsetofdigits,press
rEdial/PausE
toinserta2-secondpause.Youcaninsertmultiplepauses,
buteachonecountsasadigit(you’llsee
P
inthedisplay).
Deleting All the Phonebook Entries
Withthephoneinstandby,openthephonebook.Press
MEnu/sElEcT
and
select
Delete All
.Whenthephonepromptsyoutoconfirm,select
Yes
.
USING SPECIAL FEATURES
Silent Mode
Youcansilencetheringersonthebaseandallhandsetsforaspecific
periodoftime.
1. Withthephoneinstandby,pressandhold
#
onanyhandset.Thephone
promptsyoutoselectthenumberofhours(
1
-
9
or
Always On
)thatyou
wantittostayinsilentmode.
2. Toconfirm,press
#
orjustwaitabout5seconds.Thephoneturnsonthe
answeringsystemanddisplays
Silent Mode On
oneachhandset.
3. Aftertheselectednumberofhours,thephoneautomaticallyexitssilent
mode.Toexitsilentmodemanually,pressandhold
#
again.
Multihandset Features
# To use the features in this section, you need at least 2 handsets.
• Yourbasesupportsatotalof12cordlesshandsets:theonethatcame
withthebaseandupto11DCX170accessoryhandsets.Yourbasealso
supportsatotalof2DRX100rangeextenders,includinganythatcame
withyourphone.IfyouhaveanyDWXhandsets,theD1760islimitedto
atotalof6accessoryhandsets.
• Youmustregisteraccessoryhandsetstothebasebeforeusingthem.
(Handsetsthatcamepackagedwiththebasearealreadyregistered.)
• Handsetsthataren’tregistereddisplayaNot Registeredmessage.For
registrationinstructions,seep.16,orseetheaccessoryhandsetmanual.
12
• Ifahandsetwaseverregisteredtoabase,youmustresetitbeforeitcan
registertoanewbase;seep.16,orseetheaccessoryhandsetmanual.
Conference Calling
• Whenanoutsidecallcomesin,twohandsetscanjoininaconference
callwiththeoutsidecaller.
• Tojoinacallthatsalreadyinprogress,justpress
Talk/Flash
or
sPEakEr
.
• Toleavetheconferencecall,hangupnormally;theotherhandset
remainsconnectedtothecall.
Call Transfer
To... Press...
transfer a call
inTErcoM/clEar
. The phone puts the call on hold and
prompts you to select the handset you want to page.
When the other handset accepts the call, you'll be
disconnected (press
Talk/Flash
to rejoin the call).
cancel a transfer
Talk/Flash
to return to the call.
accept a
transferred call
inTErcoM/clEar
to answer the page and speak to the other
handset. Then, press
Talk/Flash
to speak to the caller.
Privacy Mode
Toactivateprivacymodeonacallinprogress,press
MEnu/sElEcT
twice.
Aslongasprivacymodeison,you'llseea inthedisplay,andnoother
handsetscanjoinyourcall.Privacymodeturnsoffautomaticallywhen
youhangup;youcanalsoturnitoffbypressing
MEnu/sElEcT
twice.
Handset to Handset Intercom
• Wheneverthephoneisinstandby,youcanmakeanintercomcall
betweenhandsetswithoutusingthephoneline.
• Youcanmakeanintercomcallfromanyhandset,butonlytwohandsets
canbeinanintercomcallatanytime.
• Ifanoutsidecallcomesinduringanintercompage,thephonecancels
thepagesoyoucananswertheincomingcall.
• Ifanoutsidecallcomesinduringanintercomcall,press
Talk/Flash
to
hanguptheintercomcallandanswertheoutsidecall.
To... Press...
make an intercom
page
inTErcoM/clEar.
Select the handset you want to talk
with, or
All
to page all handsets at the same time.
13
To... Press...
cancel a page
End
.
answer a page
inTErcoM/clEar
or
Talk/Flash
.
end an intercom call
End
. Both handsets return to standby.
Chain Dialing
Ifyouoftenhavetoenteraseriesofdigitsoracodenumberduringa
call,youcansavethatcodenumbertoaphonebookentryandusethe
phonebooktosendthecodenumber.
1. Enterthecodenumber(upto20digits)intothephonebookjustlike
aregularphonebookentry.Besuretoenterthecodenumberintothe
phonebookexactlyasyouwouldenteritduringacall.
2. Whenyouhearthepromptthattellsyoutoenterthenumber,openthe
phonebookandfindtheentrythatcontainsyourcodenumber.
3. Press
MEnu/sElEcT
tosendthecode.Ifyouchangeyourmind,justclose
thephonebook.
Voice Message Notication
Ifyousubscribetoavoicemailservice,yourphonedisplaysthevoice
mailicon( )whenyouhaveanewmessage.Thisfeaturesupports
Frequency-ShiftKeying(FSK)andStutterDialTone(SDT)notification,
whichyoucanturnonandoffthrough
Global Setup/Voice Mail Tone
.
Afteryoulistentoyourmessages,themessageiconturnsoff.Ifitdoesn’t,
youcanresetit:Withthephoneinstandby,openthemenuandselect
Global Setup
;select
VMWI Reset
,thenselect
Yes.
Setting Up Voice Mail Access
Ifyouhavevoicemailaccessthroughyourserviceprovider,youcan
programthataccessnumberintoyourphoneandthenjustpressonekey
todial-
MEssagE/MuTE
.Youwillsetupanaccesscodetoyouraccount,and
youcaneitherenterthatmanuallyafteryouhaveaccessedthevoicemail
oryoucanprogramthatintoyourphone,too.
1. Press
MEssagE/MuTE
.Ifnovoicemailaccessnumberhasbeensetup,the
systempromptsyoutodothatnow.
2. Entertheprovider’svoicemailaccessnumber.Press
MEnu/sElEcT
toset
thenumber.
3. Thescreendisplays
DONE!
14
4. Toaccessyourprovider’svoicemailservicenow,press
MEssagE/MuTE
.
Thesystemwilldialthevoicemailserviceandyoucanenteryour
securitycodemanuallywhenprompted.
Editing Your Voice Mail Number
Youcanaddyourvoicemailsecuritycodetothevoicemailnumberstring.
1. Press
MEnu/sElEcT
,thenscrollto
Global Setup/Edit Voice Mail
.
2. Enteryourvoicemailnumberagain,thenpress
rEdial/PausE
twiceto
enter22-secondpauses.Next,enteryoursecuritycode.
3. Press
MEnu/sElEcT
whenyouarefinished.Thesystemdisplays
DONE!
4. Toaccessyourprovider’svoicemailservicenow,justpress
MEssagE/
MuTE
.Thesystemwilldialtheaccessnumber,wait4seconds,andthen
itwilldialthesecuritycode.
IMPORTANT INFORMATION
Solving Problems
Ifyouhaveanytroublewithyourphone,checkthissectionfirst.Ifyou
needhelp,callourCustomerCareLinelistedonthefrontcover.
General problems Possible solutions
No handsets can make or
receive calls.
• Check the telephone cord connection.
• Disconnect the base AC adapter for a few
minutes; then reconnect it.
A handset can’t make or
receive calls.
• Move the handset closer to the base.
A handset can make calls,
but it won’t ring.
• Make sure the ringer is turned on.
• Make sure Silent Mode is turned off (see p. 10).
A handset is not working.
• Charge the battery for 15-20 hours.
• Check the battery connection.
The phone keeps ringing
when I answer on an
extension.
• You may have to change the line mode.
Contact Customer Service for instructions.
Audio issues Possible solutions
Callers sound
weak or soft.
• Move the handset closer to the base.
• Keep the handset’s battery fully charged.
• Increase the earpiece volume.
15
Audio issues Possible solutions
There’s a lot of
noise or static on
the line
• Check for interference from appliances (microwave
ovens, TVs, etc.) or wireless devices (baby monitors,
WiFi equipment, etc.). Move the handset or base away
from the interference source.
• If you use a telecoil hearing aid, turn on T-coil mode
(see p. 7).
• If you have any service that uses the phone line, add a
DSL or telephone line filter (see below).
Caller ID problems Possible solutions
No handsets display
Caller ID information.
• Let calls ring twice before answering.
• Make sure your Caller ID service is active.
Caller ID displays briefly
and then clears.
• You may have to change the line mode.
Contact Customer Service for instructions.
Multi-handset problems Possible solutions
I can’t transfer calls.
• Reset the handset (see p. 16).
Two handsets can’t talk to a caller.
• See if any handset is in Privacy Mode.
A handset says
Unavailable
.
• Move the handset closer to the base.
• See if any handset is in Privacy Mode.
I can’t register a new handset.
• Reset the handset (see p. 16).
• See if you have 12 registered handsets.
Installing a Line Filter or DSL Filter
AtelephonelinelterorDSLlterpreventsservicesthatusethephonelinefrom
causinginterferenceonyourphone.Togetalinelter,contactyourservicepro-
viderorlookinanelectronicsstore.
Plugthelterintothetelephonewalljackandplugthebaseintothelter.Makea
testcalltomakesurethenoiseisgone.
Liquid Damage
CAUTION: If the base is covered in liquid, disconnect the adapter & phone
cord from the wall before touching it.
Iftheliquidisonlyontheexteriorhousingofthebaseorhandset,wipeitoand
useasnormal.Ifyoucanhearliquidinsidethehousing:
1. Removeallcompartmentcovers,anddisconnectallcablesandcords.
2. Ifliquidisleakingfromanyventorhole,turnthephonesothatventfaces
down.Ifnot,placethelargestventfacedown.
3. Letdryforatleast3days.Checkforliquidinsidethephonebeforereplacing
compartmentcovers&reconnectingcords.
16
Resetting Handsets
Ifyouhavetroublewithahandsetor
ifyouwanttoreplaceone,clearthe
registrationinformationfromthebase
andthehandset:
1. Press&hold
End
and
#
atthesame
timeuntilyouseethe
System Reset
menu.
2. Ifyoustillhavethebasethehandset
isregisteredto,select
Deregister HS
,
thenselectthehandsetyouwant
toreset.Ifyoudon’thavethatbase
anymore,select
Base Unavailable
.
3. Toconrm,select
Yes
.ehandset
displays
Handset not registered
.
Registering Handsets
Ifyouseea“notregistered”messageon
ahandset,youmustregisterittoabase
beforeusingit.
1. Placethehandsetinthebase;
thedisplayshouldsay
Handset
Registering
.
2. Waituntilthedisplaysays
Registration Complete
(about30
seconds),thenpickupthehandset
andpress
Talk/Flash
.
3. Ifyoudon’thearadialtoneorthe
displaysays
Registration Failed
,
chargethebatterycompletely,then
tryagain.
Adapter and Battery
Information
AC adapter
Partnumber PS-0035
Inputvoltage 120VAC,60Hz
Outputvoltage 8VAC@300mA
x UseonlythesuppliedACadapters.
x Usetheproperadapterforthebase&
anychargers.
x Donotplacetheunitindirectsunlight
orsubjectittohightemperatures.
Battery pack (with normal use)
Partnumber BT-1021
Capacity 300mAh,2.4VDC
Talktime about7hours
Standbytime about7days
Batterylife about1year
x Replacethebatterywhenthetalkor
standbytimebecomesnoticeablyre-
duced.Forreplacements,calltheParts
Department(seethefrontcover).
x Whenthebatterygetslow,thehandset
beepsandshowsalowbatteryalert;put
thehandsetinthecradleforrecharg-
ing.
Rechargeable Battery Warning
x isequipmentcontainsarecharge-
ableNickel-Metal-Hydride(Ni-MH)
battery.
x Nickelisachemicalknowntothestate
ofCaliforniatocausecancer.
x Donotshort-circuitthebattery.
x ebatteriesinthisequipmentmay
explodeifdisposedofinare.
x Donotchargethebatteriesinanychar-
gerotherthantheonespeciedinthe
owner'smanual.Usinganothercharger
maydamagethebatteryorcauseitto
explode.
x Aspartofourcommitmentto
protectingour
environmentand
conservingnatural
resources,Uniden
voluntarilyparticipates
inanRBRC®industry
programtocollectand
recycleusedNi-MHbatterieswithin
theUnitedStates.Pleasecall
1-800-8-BATTERYforinformationon
Ni-MHbatteryrecyclinginyourarea.
(RBRC®isaregisteredtrademarkofthe
RechargeableBatteryRecycling
Corporation.)
Rechargeable batteries must be
recycled or disposed of properly.
17
Warning! The cords on this
product and/or accessories contain
lead, a chemical known to the
state of California to cause birth
defects or other reproductive
harm. Wash hands after handling.
Uniden works to reduce lead
content in our products &
accessories.
Compliance Information
FCC Part 68 Information
isequipmentcomplieswithPart
68oftheFCCrulesandtherequire-
mentsadoptedbytheACTA.Onthe
bottomofthisequipmentisalabelthat
contains,amongotherinformation,
aproductidentierintheformatUS:
AAAEQ##TXXXX.Ifrequested,this
numbermustbeprovidedtothephone
company.
AnapplicableUniversalService
OrderCodes(USOC)certicationfor
thejacksusedinthisequipmentis
provided(i.e.,RJ11C)inthepackaging
witheachpieceofapprovedterminal
equipment.Aplugandjackusedto
connectthisequipmenttothepremises
wiringandtelephonenetworkmust
complywiththeapplicableFCCPart
68rulesandrequirementsadoptedby
theACTA.Acomplianttelephonecord
andmodularplugisprovidedwith
thisproduct.Itisdesignedtobecon-
nectedtoacompatiblemodularjack
thatisalsocompliant.Seeinstallation
instructionsfordetails.
eRENisusedtodeterminethe
numberofdevicesthatmaybecon-
nectedtoaphoneline.ExcessiveRENs
onaphonelinemayresultindevices
notringinginresponsetoanincom-
ingcall.Inmostbutnotallareas,the
sumofRENsshouldnotexceedve
(5.0).Tobecertainofthenumberof
devicesthatmaybeconnectedtoa
line,asdeterminedbythetotalRENs,
contactthetelephoneprovider.e
RENforthisproductispartofthe
productidentierthathastheformat
US:AAAEQ##TXXXX.edigitsrep-
resentedby##aretheRENwithouta
decimalpoint(e.g.,03isaRENof0.3).
Ifthisequipmentcausesharmtothe
telephonenetwork,thetelephonecom-
panywillnotifyyouinadvancethat
temporarydiscontinuanceofservice
mayberequired.Butifadvancenotice
isn'tpractical,thetelephonecompany
willnotifythecustomerassoonaspos-
sible.Also,youwillbeadvisedofyour
righttoleacomplaintwiththeFCC
ifyoubelieveitisnecessary.etele-
phonecompanymaymakechangesin
itsfacilities,equipment,operationsor
proceduresthatcouldaecttheopera-
tionoftheequipment.Ifthishappens
thetelephonecompanywillprovide
advancenoticeinorderforyoutomake
necessarymodicationstomaintain
uninterruptedservice.
Pleasefollowinstructionsforrepair-
ing,ifany(e.g.batteryreplacement
section);otherwisedonotsubstituteor
repairanypartsofthedeviceexceptas
speciedinthismanual.Connection
topartylineserviceissubjecttostate
taris.Contactthestatepublicutility
commission,publicservicecommis-
sionorcorporationcommissionfor
information.isequipmentishearing
aidcompatible.
Ifyouexperiencetroublewiththis
equipment,contactthemanufac-
turer(seethecoverofthismanualfor
contactinformation)oranauthorized
agent.Iftheequipmentiscausingharm
tothetelephonenetwork,thetelephone
companymayrequestthatyoudiscon-
necttheequipmentuntiltheproblem
isresolved.
Ifyourhomehaswiredalarmequip-
mentconnectedtoaphoneline,besure
thatinstallingthesystemdoesnotdis-
18
ableyouralarmequipment.Ifyouhave
questionsaboutwhatwilldisablealarm
equipment,contactyourtelephone
companyoraqualiedinstaller.
Anychangesormodicationstothis
productnotexpresslyapprovedbythe
manufacturerorotherpartyrespon-
sibleforcompliancecouldvoidyour
authoritytooperatethisproduct.
NOTICE:Accordingtotelephonecom-
panyreports,ACelectricalsurges,typi-
callyresultingfromlightningstrikes,
areverydestructivetotelephone
equipmentconnectedtoACpower
sources.Tominimizedamagefrom
thesetypesofsurges,asurgearrestoris
recommended.
FCC Part 15 Information
isdevicecomplieswithpart15of
theFCCrules.Operationissubjectto
thefollowingtwoconditions:(1)is
devicemaynotcauseharmfulinterfer-
ence,and(2)isdevicemustaccept
anyinterferencereceived,including
interferencethatmaycauseundesired
operation.Privacyofcommunications
maynotbeensuredwhenusingthis
phone.
FCC PART 15.105(b):Note:is
equipmenthasbeentestedandfound
tocomplywiththelimitsforaClass
Bdigitaldevice,pursuanttopart15
oftheFCCRules.eselimitsare
designedtoprovidereasonableprotec-
tionagainstharmfulinterferenceina
residentialinstallation.isequip-
mentgenerates,usesandcanradiate
radiofrequencyenergyand,ifnot
installedandusedinaccordancewith
theinstructions,maycauseharmful
interferencetoradiocommunications.
However,thereisnoguaranteethat
interferencewillnotoccurinaparticu-
larinstallation.Ifthisequipmentdoes
causeharmfulinterferencetoradio
ortelevisionreception,whichcanbe
determinedbyturningtheequipment
oandon,theuserisencouragedto
trytocorrecttheinterferencebyoneor
moreofthefollowingmeasures:
x Reorientorrelocatethereceiving
antenna.
x Increasetheseparationbetweenthe
equipmentandreceiver.
x Connecttheequipmentintoanoutlet
onacircuitdierentfromthattowhich
thereceiverisconnected.
x Consultthedealeroranexperienced
radio/TVtechnicianforhelp.
FCC RF Exposure Information
isproductcomplieswithFCCradia-
tionexposurelimitsunderthefollow-
ingconditions:
x ebasemustbeplacedtoallowa
minimumof20cm(8inches)between
theantennaandallpersonsduring
normaloperation.
x ebasemustnotbecollocatedor
operatedinconjunctionwithanyother
antennaortransmitter.
x ehandsetisdesignedforbody-worn
operationandmeetsFCCRFexposure
guidelineswhenusedwithanybeltclip,
carryingcase,orotheraccessorysup-
pliedwiththisproduct.(Allnecessary
accessoriesareincludedinthepackage;
anyadditionaloroptionalaccessories
arenotrequiredforcompliancewith
theguidelines.)irdpartyaccessories
(unlessapprovedbythemanufacturer)
shouldbeavoidedasthesemight
notcomplywithFCCRFexposure
guidelines.
Industry Canada (I.C.) Notice
Terminal equipment
NOTICE:isequipmentmeetsthe
applicableIndustryCanadaTerminal
EquipmentTechnicalSpecications.
isisconrmedbytheregistration
number.eabbreviationICbefore
theregistrationnumbersigniesthat
registrationwasperformedbasedona
DeclarationofConformityindicat-
19
ingthatIndustryCanadatechnical
specicationsweremet.Itdoesnot
implythatIndustryCanadaapproved
theequipment.
NOTICE:eRingerEquivalence
Number(REN)forthisterminalequip-
mentismarkedontheequipmentitself.
eRENassignedtoeachterminal
equipmentprovidesanindicationof
themaximumnumberofterminals
allowedtobeconnectedtoatelephone
interface.eterminationonaninter-
facemayconsistofanycombinationof
devicessubjectonlytotherequirement
thatthesumoftheRingerEquivalence
Numbersofallthedevicesdoesnot
exceed5.
Radio equipment
etermICbeforetheradiocerti-
cationnumberonlysigniesthat
IndustryCanadatechnicalspecica-
tionsweremet.Operationissubject
tothefollowingtwoconditions:(1)
thisdevicemaynotcauseinterference,
and(2)thisdevicemustacceptany
interference,includinginterference
thatmaycauseundesiredoperationof
thedevice."Privacyofcommunications
maynotbeensuredwhenusingthis
telephone".
1-Year Limited Warranty
Evidence of original purchase is
required for warranty service.
WARRANTOR:UNIDENAMERICA
CORPORATION("Uniden")
ELEMENTSOFWARRANTY:Uniden
warrants,foroneyear,totheoriginal
retailowner,thisUnidenProductto
befreefromdefectsinmaterialsand
crasmanshipwithonlythelimitations
orexclusionssetoutbelow.
WARRANTYDURATION:is
warrantytotheoriginalusershall
terminateandbeofnofurthereect
12monthsaerthedateoforiginal
retailsale.ewarrantyisinvalidif
theProductis(A)damagedornot
maintainedasreasonableornecessary,
(B)modied,altered,orusedaspartof
anyconversionkits,subassemblies,or
anycongurationsnotsoldbyUniden,
(C)improperlyinstalled,(D)serviced
orrepairedbysomeoneotherthanan
authorizedUnidenservicecenterfora
defectormalfunctioncoveredbythis
warranty,(E)usedinanyconjunction
withequipmentorpartsoraspartof
anysystemnotmanufacturedbyUn-
iden,or(F)installedorprogrammed
byanyoneotherthanasdetailedbythe
owner'smanualforthisproduct.
STATEMENTOFREMEDY:In
theeventthattheproductdoesnot
conformtothiswarrantyatanytime
whilethiswarrantyisineect,warran-
torwilleither,atitsoption,repairor
replacethedefectiveunitandreturnit
toyouwithoutchargeforparts,service,
oranyothercost(exceptshippingand
handling)incurredbywarrantororits
representativesinconnectionwiththe
performanceofthiswarranty.Warran-
tor,atitsoption,mayreplacetheunit
withaneworrefurbishedunit.THE
LIMITEDWARRANTYSETFORTH
ABOVEISTHESOLEANDENTIRE
WARRANTYPERTAININGTOTHE
PRODUCTANDISINLIEUOFAND
EXCLUDESALLOTHERWARRAN-
TIESOFANYNATUREWHATSO-
EVER,WHETHEREXPRESS,IM-
PLIEDORARISINGBYOPERATION
OFLAW,INCLUDING,BUTNOT
LIMITEDTOANYIMPLIEDWAR-
RANTIESOFMERCHANTABILITY
ORFITNESSFORAPARTICULAR
PURPOSE.THISWARRANTYDOES
NOTCOVERORPROVIDEFORTHE
REIMBURSEMENTORPAYMENT
OFINCIDENTALORCONSEQUEN-
TIALDAMAGES.Somestatesdonot
allowthisexclusionorlimitationof
incidentalorconsequentialdamagesso
20
theabovelimitationorexclusionmay
notapplytoyou.
LEGALREMEDIES:iswarranty
givesyouspeciclegalrights,and
youmayalsohaveotherrightswhich
varyfromstatetostate.iswarranty
isvoidoutsidetheUnitedStatesof
AmericaandCanada.
PROCEDUREFOROBTAINING
PERFORMANCEOFWARRANTY:
If,aerfollowingtheinstructionsin
theowner'smanualyouarecertain
thattheProductisdefective,pack
theProductcarefully(preferablyin
itsoriginalpackaging).Disconnect
thebatteryfromtheProductand
separatelysecurethebatteryinits
ownseparatepackagingwithinthe
shippingcarton.eProductshould
includeallpartsandaccessories
originallypackagedwiththeProduct.
Includeevidenceoforiginalpurchase
andanotedescribingthedefectthat
hascausedyoutoreturnit.eProd-
uctshouldbeshippedfreightprepaid,
bytraceablemeans,towarrantorat:
UnidenAmericaService
4700AmonCarterBlvd.
FortWorth,TX76155
AsanEnergyStar
®
Partner,
Unidenhasdetermined
thatthisproductmeetsthe
EnergyStar
®
guidelinesfor
energyeciency.Energy
Star
®
isaU.S.registeredmark.
x Uniden
®
isaregisteredtrademarkof
UnidenAmericaCorporation.
x epicturesinthismanualarefor
exampleonly.Yourphonemaynot
lookexactlylikethepictures.
Minimum size: 0.375 in wide (9.525 mm)
Minimum drawing size (with clear space) = 0.555 in (14.1 mm) wide
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

Uniden D1760-12 User manual

Category
Telephones
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI