Metra 99-8222 allows for seamless integration of aftermarket radios into select Toyota Highlander models. It accommodates various radio configurations, including DIN, ISO mount, double DIN, and stacked ISO mount units. The kit includes all necessary brackets, trim plates, and hardware for a professional installation. Its painted-to-match finish ensures a factory-like appearance, while the included pocket provides storage space for small items. Installation requires basic tools and involves removing the factory radio and assembling the kit components.
Metra 99-8222 allows for seamless integration of aftermarket radios into select Toyota Highlander models. It accommodates various radio configurations, including DIN, ISO mount, double DIN, and stacked ISO mount units. The kit includes all necessary brackets, trim plates, and hardware for a professional installation. Its painted-to-match finish ensures a factory-like appearance, while the included pocket provides storage space for small items. Installation requires basic tools and involves removing the factory radio and assembling the kit components.
INSTALLATION INSTRUCTIONS FOR PART 99-8222
99-8222/
99-8222BR
APPLICATIONS
Toyota Highlander
2008-2010
NON-NAV MODELS ONLY
KIT FEATURES
• DIN Radio Provision with Pocket
• ISO Mount Radio Provision with Pocket
• Double DIN Radio Provision
• Stacked ISO Mount Units Provision
• Painted to match factory dash:
99-8222 = Black,
99-8222BR = Brown
• A) Radio Housing • B) ISO Brackets • C) ISO Trim Plate • D) Double DIN Brackets
• E) Double DIN/Stacked ISO Trim Plate • F) Snap in Pocket • G) Radio Housing Brackets
KIT COMPONENTS
A
Small Flat Blade Screwdriver/ Panel Removal Tool
• Phillips Screwdriver • Socket Set
1-800-221-0932
© COPYRIGHT 2007-2010 METRA ELECTRONICS CORPORATION
www.metraonline.com
B
D
E
C
F
G
WIRING AND ANTENNA CONNECTIONS
(Sold Separately)
Harness:
• 70-1761 - Toyota interface 1987-up
• TYTO-01 - Toyota amplified interface
harness 2003-up
Antenna Adapter:
Not required
TOOLS REQUIRED:
Dash Disassembly
-
Toyota Highlander 2008 -2010. . . . . . . . . . . . . . . . . . . .
. . . . 1,2
Kit Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Kit
Assembly
- DIN Radio Provision with Pocket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
- ISO Mount Radio Provision with Pocket. . . . . . . . . . . . . . . . . . . . . . . . 5
- Double DIN Radio Provision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
- Stacked ISO Mount Units Provision . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Final
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
TABLE OF CONTENTS
99-8222
*Note:
Ref
er also to the instructions included with the aftermarket radio.
K
NOWLEDGE IS
P
OWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take
steps toward a better tomorrow.
99-8222 DASH DISASSEMBLY
TOYOTA HIGHLANDER 2008-2010
A
B
C
1
1
Unclip the trim panel containing the
climate controls and pocket. Unplug
the climate controls and remove the
trim panel. (
Figure B)
Disconnect the negative battery ter-
minal to prevent an accidental short
circuit.
3
Unclip and remove the a/c vent panel.
(
Figure A)
2
Remove (4) 10 MM bolts securing the
radio assembly. Unplug and remove
the radio assembly. (
Figure C)
4
Continued on page 2
99-8222 DASH DISASSEMBLY
TOYOTA HIGHLANDER 2008-2010
D
ONE
SCREW
ON EACH
SIDE
SIDE VIEW
CLOCK/DISPLAY-
RADIO ASSEMBLY
E
F
REMOVE
4 SPRING CLIPS
2
5
Remove (4) spring clips from the back
of the radio. (Retain the spring clips
for re-use during kit preparation.)
(
Figure F)
Remove the (2) Phillips screws secur-
ing the clock/display then remove the
clock/display from the radio assembly.
(Retain the screws and clock/display
for re-use during kit preparation.)
(
Figure D)
7
Unclip and remove the hazard switch
assembly from radio assembly.
(Retain the hazard switch assembly
for re-use during kit preparation.)
(
Figure E)
6
Continue to kit preparation
99-8222 KIT PREPARATION
TOYOTA HIGHLANDER 2008-2010
3
1
Attach the radio housing brackets to
the radio housing. Note: Make sure
that the leg on the bracket is on the
outside of the leg on the radio hous-
ing. (
Figure A)
2
Attach the clock/display to the brack-
ets/radio housing assembly using the
factory hardware. (
Figure B)
3
Snap the hazard switch assembly into
the radio housing. (
Figure C)
4
Attach the (4) spring clips to the back
of the radio housing. (
Figure D)
Continue to kit assembly
A
B
C
PAS
SENGER
D
ATTACH
4 SPRING CLIPS
99-8222 KIT ASSEMBLY
4
A
B
C
DIN RADIO PROVISION WITH POCKET
Slide the DIN cage into the Radio
Housing and secure by bending the
metal locking tabs outward.
(Figure A)
1
Slide the aftermarket radio into the
DIN cage until it snaps into place.
(Figure B)
2
Snap the pocket into the radio housing.
(Figure C)
3
Continue to final assembly.
*Note: Refer also to the instructions included with the aftermarket radio.
99-8222 KIT ASSEMBLY
5
A
B
C
ISO MOUNT RADIO PROVISION WITH POCKET
Mount the ISO Brackets to the radio
using the screws supplied with the
radio.
(Figure A)
1
Slide the radio into the radio housing
until it snaps into place.
(Figure B)
2
Snap the ISO Trim Plate onto the front
of the Radio Housing.
(Figure B)
3
Snap the Pocket into the Radio
Housing.
(Figure C)
4
Continue to final assembly.
*Note: Refer also to the instructions included with the aftermarket radio.
99-8222 KIT ASSEMBLY
6
DOUBLE DIN OR
STACKED ISO MOUNT UNITS PROVISION
Cut and remove the center bar from
the Radio Housing.
(Figure A)
1
Snap the Double DIN brackets to the
inside edge of the Radio Housing.
(Figure B)
2
Slide the Double DIN or stacked ISO
mount units into the bracket/radio
housing assembly then secure it to
the assembly using the screws sup-
plied with the units.
(Figure C)
3
Snap the Double DIN/Stacked ISO Trim
Plate onto the front of the Radio
Housing.
(Figure C)
4
Continue to final assembly.
*Note: Refer also to the instructions included with the aftermarket radio.
A
B
C
99-8222 FINAL ASSEMBLY
FINAL ASSEMBLY
(A) Strip wire ends back 1/2"
B) Twist ends together
C) Solder
D) Tape
A
B
C
D
Locate the factory wiring harness in the dash. Metra recommends using the
proper mating adapter and making connections as shown. (Isolate and individ-
ually tape off the ends of any unused wires to prevent electrical short circuit.)
Re-connect the negative battery terminal and test the unit for proper operation.
Reassemble radio and dash assemblies in reverse order of disassembly.
1
2
3
FINAL WIRING CONNECTIONS
Make wiring connections using the EIA color code chart shown below and the instructions included with the
head unit. Metra recommends making connections as shown below; Strip, Splice, Solder, Tape. Isolate and
individually tape off ends of any unused wires to prevent electrical short circuit.
METRA / EIA WIRING CODE
12V Ignition / Acc. . . . . . . . . . Red
12V Batt / Memory. . . . . . . . . Yellow
Ground. . . . . . . . . . . . . . . . . . Black*
Power Antenna. . . . . . . . . . . . Blue
Amp Turn-On . . . . . . . . . . . . . Blue / White
Amp Ground. . . . . . . . . . . . . . Black / White
Illumination . . . . . . . . . . . . . . Orange
Dimmer . . . . . . . . . . . . . . . . . Orange / White
Right Front (+) . . . . . . . . . . . . Gray
Right Front (-). . . . . . . . . . . . . Gray/ Black
Left Front (+) . . . . . . . . . . . . . White
Left Front (-). . . . . . . . . . . . . . White / Black
Right Rear (+) . . . . . . . . . . . . Violet
Right Rear (-) . . . . . . . . . . . . . Violet / Black
Left Rear (+) . . . . . . . . . . . . . Green
Left Rear (-) . . . . . . . . . . . . . . Green / Black
*NOTE: When a Black wire is not present, ground radio to vehicle chassis.
All colors may not be present on all leads due to manufacturer’
s specifications.
7
NOTES
8
99-8222
NOTES
9
99-8222
99-8222 INSTRUCTIONS
1-800-221-0932
REV. 04/26/10 © COPYRIGHT 2007-2010 METRA ELECTRONICS CORPORATION INST99-8222
www.metraonline.com
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
Metra 99-8222 allows for seamless integration of aftermarket radios into select Toyota Highlander models. It accommodates various radio configurations, including DIN, ISO mount, double DIN, and stacked ISO mount units. The kit includes all necessary brackets, trim plates, and hardware for a professional installation. Its painted-to-match finish ensures a factory-like appearance, while the included pocket provides storage space for small items. Installation requires basic tools and involves removing the factory radio and assembling the kit components.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Metra 998222 User manual
-
-
-
-
-
-
-
Metra 99-7876 Installation guide
-
Metra 70-5511 User manual
-
Dodge 99-6512 Installation guide
Other documents
-
Metra Electronics 99-7337B User manual
-
Metra Electronics 99-8225G User manual
-
Metra Electronics 99-8225G User manual
-
Metra Electronics ACURA 95-7868B User manual
-
Metra Electronics 99-7878B User manual
-
Metra Electronics 95-7866B User manual
-
Mobilis 011003 Datasheet
-
-
Metra Electronics 99-5822B User manual
-
Metra Electronics 95-5822B User manual
