F21ARESSS

Forte F21ARESSS Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Forte F21ARESSS Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
F21ARESWW & F21ARESSS
Upright Convertible Refrigerator/Freezer
Manual
MODEL: F21UFESWW & F21UFESSS
2
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Important Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Grounding requirement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Interior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Touch pad controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Setting up your freezer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Before using your freezer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Finding a suitable loca
tion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Leveling your freezer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Providing a proper power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Installing the door handle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Using your freezer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Using the Lock button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Switching between Freezer and Refrigerator modes. . . . . . . . .11
Quick Freezing foods. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Switching between Fahrenheit and Celsius . . . . . . . . . . . . . . . . .12
Maintaining your freezer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Storing your freezer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . .12
Moving your freezer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Tips on saving energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Understanding Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
High Temp Alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Temp Out of Range Alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Door Open Alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
How do I reset my freezer to factory defaults? . . . . . . . . . . . . . . . . . . . .14
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
2
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Important Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Grounding requirement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Interior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Touch pad controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Setting up your freezer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Before using your freezer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Finding a suitable loca
tion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Leveling your freezer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Providing a proper power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Installing the door handle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Using your freezer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Using the Lock button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Switching between Freezer and Refrigerator modes. . . . . . . . .11
Quick Freezing foods. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Switching between Fahrenheit and Celsius . . . . . . . . . . . . . . . . .12
Maintaining your freezer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Storing your freezer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . .12
Moving your freezer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Tips on saving energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Understanding Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
High Temp Alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Temp Out of Range Alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Door Open Alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
How do I reset my freezer to factory defaults? . . . . . . . . . . . . . . . . . . . .14
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
I
mportant Safety Instructions.........................................................................3
Grounding requirement............................................................................5
Features..................................................................................................................6
Interior..............................................................................................................6
Controls...................................................................................................................7
The control panel..........................................................................................7
Set temperature............................................................................................8
Setting up your freezer.......................................................................................9
Before using your freezer...........................................................................9
Finding a suitable location........................................................................9
Leveling your freezer.................................................................................10
Providing a proper power supply.........................................................10
Maintaining your freezer.................................................................................11
Storing your freezer...........................................................................................11
Moving your freezer..........................................................................................12
Troubleshooting.................................................................................................13
Specications.......................................................................................................15
Warranty................................................................................................................16
3
Important Safety Instructions
WARNING
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this appliance near water.
6 Clean only with a damp cloth.
7 Do not block any ventilation openings.
8 Install in accordance with the manufacturers instructions.
9 Do not install near any heat sources, such as radiators, heat registers,
stoves, or other apparatus that produce heat.
10 Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of th
e obsolete outlet.
11 Protect the power cord from being walked on or pinched, particularly
at plugs, convenience receptacles, and the point where they exit from
the appliance.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates that dangerous voltage
constituting a risk of electric shock is present
within your freezer.
This symbol indicates that there are important
operating and maintenance instructions in the
literature accompanying your freezer.
4
12 Do not attempt to modify or extend the power cord of this appliance.
13 Unplug this appliance during lightning storms or when it will not be
used for long periods of time.
14 Make sure that the available AC power matches the voltage
requirements of this appliance.
15 Do not handle the plug with wet hands. This could result in an electric
shock.
16 Unplug the power cord by holding the plug, never by pulling the cord.
17 Do not turn the appliance on or off by plugging or unplugging the
power cord.
18 Refer all servicing to qualified service personnel. Servicing is required
when the appliance has been damaged in any way, such as the
power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the appliance, the appliance has been exposed
to rain or moisture, does not operate normally,
or has been dropped.
19 To reduce the risk of fire or electric shock, do not expose this appliance
to rain, moisture, dripping, or splashing, and no objects filled with
liquids should be placed on top of it.
20 Do not use extension cords or ungrounded (two prong) adapters.
21 This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible
for their safety.
22 Children should be supervised to ensure that they do not play with the
appliance.
23 If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent, or similarly qualified person, in order
to avoid a hazard.
24
Take off the doors and leave the shelves in place so that children may
not easily climb inside.
WARNING
Electric Shock Hazard
Failure to follow these instructions can result in electric shock, fire, or
death.
1 WARNING–Keep ventilation openings, in both the freezer and the
built-in structure, clear of obstruction.
2 WARNING–Do not touch the interior of the freezer with wet hands.
This could result in frost bite.
5
3 WARNING–Do not use mechanical devices or other means to
accelerate the defrosting process, other than those recommended by
the manufacturer.
4 WARNING–Do not damage the refrigerant circuit.
5 WARNING–Do not damage the refrigerant tubing when handling,
moving, or using the freezer.
6 WARNINGDANGER—Never allow children to play with, operate, or
crawl inside the freezer.
Risk of child entrapment. Before you throw away your old freezer:
1) Take off the doors
2) Leave the shelves in place so that children may not easily climb
inside
7 Unplug the freezer before carrying out user maintenance on it.
8 This freezer can be used by children age eight years and older and
persons with reduced physical or mental capabilities or lack of
experience and knowledge if they are given supervision or instruction
concerning the use of the fr
eezer in a safe way and understand the
hazards involved. Children should not play with the freezer. Cleaning
and maintenance should not be performed by children without
supervision.
9 If a component part is damaged, it must be replaced by the
manufacturer, its service agent, or similar qualified persons in order to
avoid a hazard.
10 Please dispose of the freezer according to local regulations as the
freezer contains flammable gas and refrigerant.
11 Follow local regulations regarding disposal of the freezer due to
flammable refrigerant and gas. All refrigeration products contain
refrigerants, which under the guidelines of federal law must be
removed before disposal. It is the consumer's responsibility to comply
with federal and local regulations when disposing of this product.
12 This freezer is intended to be used in household and similar
environments.
13 Do not store or use gasoline or any flammable liquids inside or in the
vicinity of this freezer.
14 Do not use extension cords or ungrounded (two-prong) adapters with
this freezer. If the power cord is too short, have a qualified electrician
install an outlet near the freezer. Use of an extension cord can
negatively affect the freezers performance.
Grounding requirement
This freezer must be grounded. This freezer is equipped with a cord
having a grounding wire with a grounding plug. The plug must be
inserted into an outlet that is properly installed and grounded.
6
Improper use of the grounding plug can result in a risk of electric shock.
Consult a qualified electrician or service person if the grounding
instructions are not completely understood, or if doubt exists as to
whether the freezer is properly grounded.
Features
Package contents
t 13.8 / 17 / 21 cubic foot upright freezer
t Door handle, screws, and hex wrench
Interior
Notes
The illustrations shown in this user guide are only for reference.
The actual product may differ slightly.
Air flow outlet
Wire shelf
Air flow inlet
Wire drawer
Door tray
Leveling feet (2 - bottom front)
Wheels (2 - Bottom back)
1
2
3
4
5
6
5
1
2
3
4
6


6
Improper use of the grounding plug can result in a risk of electric shock.
Consult a qualified electrician or service person if the grounding
instructions are not completely understood, or if doubt exists as to
whether the freezer is properly grounded.
Features
Package contents
t 13.8 / 17 / 21 cubic foot upright freezer
t Door handle, screws, and hex wrench
Interior
Notes
The illustrations shown in this user guide are only for reference.
The actual product may differ slightly.
Air flow outlet
Wire shelf
Air flow inlet
Wire drawer
Door tray
Leveling feet (2 - bottom front)
Wheels (2 - Bottom back)
1
2
3
4
5
6
5
1
2
3
4
6


6
Improper use of the grounding plug can result in a risk of electric shock.
Consult a qualified electrician or service person if the grounding
instructions are not completely understood, or if doubt exists as to
whether the freezer is properly grounded.
Features
Package contents
t 13.8 / 17 / 21 cubic foot upright freezer
t Door handle, screws, and hex wrench
Interior
Notes
The illustrations shown in this user guide are only for reference.
The actual product may differ slightly.
Air flow outlet
Wire shelf
Air flow inlet
Wire drawer
Door tray
Leveling feet (2 - bottom front)
Wheels (2 - Bottom back)
1
2
3
4
5
6
5
1
2
3
4
6







7
Touch pad controls
Setting up your freezer
Before using your freezer
t Remove the exterior and interior packing, especially the foam packing
between the outside condenser and the cabinet.
t Let the freezer stand upright for approximately two hours before
connecting it to power. This reduces the possibility of a malfunction in the
cooling system from improper handling during transportation.
t Wash the inside with a damp, warm cloth and a baking soda solution (two
tablespoons in a quart of water), then wipe dry with a dry cloth. Do this
periodically to keep your freezer looking new.
t For proper operation, its very important that you level the freezer using
the leveling feet. If this is not done, the door may not close or seal
properly, causing cooling, frost, and moisture problems. Turn the leveling
feet clockwise
to raise that side of the freezer or counterclockwise to lower
that side. The leveling feet are easier to adjust if you have someone push
against the top of the freezer to take some weight off.
t When moving your freezer, do not tilt it beyond 45° from upright.
Raise temperature
button
Freezer/Fridge
mode button
Temperature indicator
High temperature
indicator/alert
Door open
indicator/alarm
Lower temperature
button
Quick freeze
button
Control Panel
Lock/Unlock button





The control panel automatically locks after 15 seconds
Locked is the default setting for the control panel.
The control panel will lock automatically after 15 seconds
of inactivity.
Press and hold for 3 seconds.
of inactivity to prevent accidental activation. Unlock the control panel
for use.

This freezer can be used as either a freezer or refrigerator (fridge) for
your food storage needs. The default mode is Freezer and the default
temperature is Colder.
Press and hold for 3 seconds to unlock the control panel.
Freezer mode temperature range: 10 °F to -8 °F (-12 °C to -22 °C).
Fridge mode temperature range: 35 °F to 45 °F (2 °C to 7 °C).
• If the freezer is unplugged or loses power, you must wait 3 to
5 minutes before restarting it. The freezer will not start if you attempt
to restart it sooner.
If you choose to adjust the temperature settings, allow several hours for
the temperature to stabilize between adjustments.
1.
Release to select desired setting.3.
Press repeatedly to toggle among the Cold/Colder/Coldest
temperature settings.
2.


8
10
3 Loosen the hex screws on top and bottom of the handle with the hex
wrench (provided) so that you can fit the handle over the extended
head screws in the door.
4 Place the door handle over the heads of the screws, then tighten the
hex screws.
Using your freezer
The storage life of frozen foods varies and the recommended storage time
should not be exceeded.
Place frozen food into the freezer as quickly as possible after purchase. If
there are instructions on the packet, carefully follow these instructions
regarding storage times.
Pre-packed, commercially frozen food should be stored in accordance
with the frozen food manufacturer's instructions for a three star frozen
food storage compartment or home freezer.
Shelves are provided for the organization of odd-shaped items.
1 Plug in your freezer. Wait for 30 minutes, then open the freezer door to
determine if the freezer
is working properly.
2 Press and hold Lock for three seconds, then or on the control
panel touch pad to set the temperature inside the freezer. A beep
sounds when the MAX or MIN temperatures are reached.
Hex screws are here.
Extra hex screws are
Provided.
Setting up your freezer
Before using your freezer
t Remove the exterior and interior packing, especially the foam packing
between the outside condenser and the cabinet.
t Let the freezer stand upright for approximately two hours before
connecting it to power. This reduces the possibility of a malfunction in the
cooling system from improper handling during transportation.
t Wash the inside with a damp, warm cloth and a baking soda solution (two
tablespoons in a quart of water), then wipe dry with a dry cloth. Do this
periodically to keep your freezer looking new.
t For proper operation, its very important that you level the freezer using
the leveling feet. If this is not done, the door may not close or seal
properly, causing cooling, frost, and moisture problems. Turn the leveling
feet clockwise
to raise that si
de of the freezer or counterclockwise to lower
that side. The leveling feet are easier to adjust if you have someone push
against the top of the freezer to take some weight off.
t When moving your freezer, do not tilt it beyond 45° from upright.
• Freezer mode temperature range: 10 °F to -8 °F (-12 °C to -22 °C).
Fridge mode temperature range: 35 °F to 45 °F (2 °C to 7 °C).
9
10
3 Loosen the hex screws on top and bottom of the handle with the hex
wrench (provided) so that you can fit the handle over the extended
head screws in the door.
4 Place the door handle over the heads of the screws, then tighten the
hex screws.
Using your freezer
The storage life of frozen foods varies and the recommended storage time
should not be exceeded.
Place frozen food into the freezer as quickly as possible after purchase. If
there are instructions on the packet, carefully follow these instructions
regarding storage times.
Pre-packed, commercially frozen food should be stored in accordance
with the frozen food manufacturer's instructions for a three star frozen
food storage compartment or home freezer.
Shelves are provided for the organization of odd-shaped items.
1 Plug in your freezer. Wait for 30 minutes, then open the freezer door to
determine if the freezer
is working properly.
2 Press and hold Lock for three seconds, then or on the control
panel touch pad to set the temperature inside the freezer. A beep
sounds when the MAX or MIN temperatures are reached.
Hex screws are here.
Extra hex screws are
Provided.
8
Finding a suitable location
t Place your freezer on a floor that is strong enough to support the freezer
when it is fully loaded.
t This freezer is designed to be free standing only, and should not be
recessed or built-in.
t Allow 7.9 inches (20 cm) of space between the sides of the freezer and the
walls, 3.9 inches (10 cm) between the back of the freezer and the wall, and
11.8 inches (30 cm) between the top of the freezer and the ceiling. This
allows for proper air ventilation. Adjust the feet to keep the freezer level.
t If you locate the freezer next to a fixed wall, allow sufficient space on the
hinge side for the door to swing open.
t Locate the freezer away from direct sunlight and sources of heat, such as a
stove, heater, or radiator. Direct sunlight may affect the acrylic coating and
heat sources may increase electrical
consumption. Extremely cold
temperatures may also prevent the freezer from performing properly.
t Avoid locating the freezer in moist areas.
Leveling your freezer
t It is very important for the freezer to be level. If the freezer is not leveled
during installation, the doors may not close or seal properly, causing
cooling, frost, or moisture problems.
t To level your freezer, rotate the leveling feet clockwise (to raise) the freezer
or counter-clockwise (to lower).
Providing a proper power supply
Check your local power source. This freezer requires a 115V, 60Hz power
supply.
Use a receptacle that accepts the grounding prong. The power cord is
equipped with a 3-prong (grounding) plug which mates with a standard
3-prong (grounding) wall outlet to minimize the possibility of electric
shock hazard from this freezer. We recommend that the freezer be
plugged into an electrical circuit serving only this appliance and that the
circuit cannot be turned off with a switch or pul
l-chain.
Note
Have someone push against the top of the freezer to help take
some weight off the leveling foot, making it easier to adjust.
3-prong receptacle
Receptacle box cover
3-prong plug
Grounding lead
Grounding adapter Receptacle box cover
Screw
Receptacle
Using a 3-prong plug and outlet
Using a grounding adapter
10
10
3 Loosen the hex screws on top and bottom of the handle with the hex
wrench (provided) so that you can fit the handle over the extended
head screws in the door.
4 Place the door handle over the heads of the screws, then tighten the
hex screws.
Using your freezer
The storage life of frozen foods varies and the recommended storage time
should not be exceeded.
Place frozen food into the freezer as quickly as possible after purchase. If
there are instructions on the packet, carefully follow these instructions
regarding storage times.
Pre-packed, commercially frozen food should be stored in accordance
with the frozen food manufacturer's instructions for a three star frozen
food storage compartment or home freezer.
Shelves are provided for the organization of odd-shaped items.
1 Plug in your freezer. Wait for 30 minutes, then open the freezer door to
determine if the freezer
is working properly.
2 Press and hold Lock for three seconds, then or on the control
panel touch pad to set the temperature inside the freezer. A beep
sounds when the MAX or MIN temperatures are reached.
Hex screws are here.
Extra hex screws are
Provided.
8
Finding a suitable location
t Place your freezer on a floor that is strong enough to support the freezer
when it is fully loaded.
t This freezer is designed to be free standing only, and should not be
recessed or built-in.
t Allow 7.9 inches (20 cm) of space between the sides of the freezer and the
walls, 3.9 inches (10 cm) between the back of the freezer and the wall, and
11.8 inches (30 cm) between the top of the freezer and the ceiling. This
allows for proper air ventilation. Adjust the feet to keep the freezer level.
t If you locate the freezer next to a fixed wall, allow sufficient space on the
hinge side for the door to swing open.
t Locate the freezer away from direct sunlight and sources of heat, such as a
stove, heater, or radiator. Direct sunlight may affect the acrylic coating and
heat sources may increase electric
al
consumption. Extremely cold
temperatures may also prevent the freezer from performing properly.
t Avoid locating the freezer in moist areas.
Leveling your freezer
t It is very important for the freezer to be level. If the freezer is not leveled
during installation, the doors may not close or seal properly, causing
cooling, frost, or moisture problems.
t To level your freezer, rotate the leveling feet clockwise (to raise) the freezer
or counter-clockwise (to lower).
Providing a proper power supply
Check your local power source. This freezer requires a 115V, 60Hz power
supply.
Use a receptacle that accepts the grounding prong. The power cord is
equipped with a 3-prong (grounding) plug which mates with a standard
3-prong (grounding) wall outlet to minimize the possibility of electric
shock hazard from this freezer. We recommend that the freezer be
plugged into an electrical circuit serving only this appliance and that the
circuit cannot be turned off with a switch or pul
l-chain.
Note
Have someone push against the top of the freezer to help take
some weight off the leveling foot, making it easier to adjust.
3-prong receptacle
Receptacle box cover
3-prong plug
Grounding lead
Grounding adapter Receptacle box cover
Screw
Receptacle
Using a 3-prong plug and outlet
Using a grounding adapter
12
Switching between Fahrenheit and Celsius
Using the Control Panel
1 Press and hold Lock for three seconds to unlock the control panel.
2 Press and hold / for three seconds to switch settings.
Maintaining your freezer
Your freezer is designed for year-round use with only minimal cleaning
and maintenance. We recommend that you do the following every time
you defrost it to keep your freezer running odor free and efficiently:
1 Unplug your freezer from the wall outlet.
2 Remove all food.
3 Wash the shelves with a mild detergent solution.
4 Wash the inside with a damp warm cloth soaked in a solution of one
quart of lukewarm water to two tablespoons of baking soda solution.
5 Dry the interior and exterior with a soft cloth.
6 Be sure to keep the door gasket (seal) clean to keep the unit running
efficiently.
Storing your freezer
1 Unplug your freezer from the wall outlet.
2 Remove all food.
3 Clean the freezer.
4 Leave the door open slightly to avoid possible formation of
condensation, mold, or odor.
Moving your freezer
1 Unplug your freezer from the wall outlet.
2 Remove all food.
3 Securely tape down all loose items inside your freezer.
4 Tape the door shut.
Caution
To prevent damage to the finish, do not use gasoline, benzine,
thinner, or other solvents, and do not use abrasive cleaners.
Caution
Use extreme caution with children. The unit should not be
accessible to child's play.
12
Switching between Fahrenheit and Celsius
Using the Control Panel
1 Press and hold Lock for three seconds to unlock the control panel.
2 Press and hold / for three seconds to switch settings.
Maintaining your freezer
Your freezer is designed for year-round use with only minimal cleaning
and maintenance. We recommend that you do the following every time
you defrost it to keep your freezer running odor free and efficiently:
1 Unplug your freezer from the wall outlet.
2 Remove all food.
3 Wash the shelves with a mild detergent solution.
4 Wash the inside with a damp warm cloth soaked in a solution of one
quart of lukewarm water to two tablespoons of baking soda solution.
5 Dry the interior and exterior with a soft cloth.
6 Be sure to keep the door gasket (seal) clean to keep the unit running
efficiently.
Storing your freezer
1 Unplug your freezer from the wall outlet.
2 Remove all food.
3 Clean the freezer.
4 Leave the door open slightly to avoid possible formation of
condensation, mold, or odor.
Moving your freezer
1 Unplug your freezer from the wall outlet.
2 Remove all food.
3 Securely tape down all loose items inside your freezer.
4 Tape the door shut.
Caution
To prevent damage to the finish, do not use gasoline, benzine,
thinner, or other solvents, and do not use abrasive cleaners.
Caution
Use extreme caution with children. The unit should not be
accessible to child's play.
11
10
3 Loosen the hex screws on top and bottom of the handle with the hex
wrench (provided) so that you can fit the handle over the extended
head screws in the door.
4 Place the door handle over the heads of the screws, then tighten the
hex screws.
Using your freezer
The storage life of frozen foods varies and the recommended storage time
should not be exceeded.
Place frozen food into the freezer as quickly as possible after purchase. If
there are instructions on the packet, carefully follow these instructions
regarding storage times.
Pre-packed, commercially frozen food should be stored in accordance
with the frozen food manufacturer's instructions for a three star frozen
food storage compartment or home freezer.
Shelves are provided for the organization of odd-shaped items.
1 Plug in your freezer. Wait for 30 minutes, then open the freezer door to
determine if the freezer
is working properly.
2 Press and hold Lock for three seconds, then or on the control
panel touch pad to set the temperature inside the freezer. A beep
sounds when the MAX or MIN temperatures are reached.
Hex screws are here.
Extra hex screws are
Provided.
14
t The ventilation openings are blocked or dusty.
t There is too much frost build up.
t There are door seal gaps.
Door Open Alert
If the door is open for more than five minutes, the door open alert is
activated a buzzer sounds intermittently. Close the door to turn off the
alert and check to make sure that nothing is blocking the door, preventing
it from closing. Also, check to make sure that the freezer is level. An
unlevel freezer may prevent the door from closing properly.
How do I reset my freezer to factory
defaults?
1 Press and hold Lock for three seconds to unlock the control panel.
2 Press the Lock and buttons at the same time for three seconds to
reset the freezer to factory defaults. The panel beeps and all of the
indicators turn on for three seconds. If the compressor is running, it
pauses for five minutes, then restarts.
13
Be sure the freezer does not tilt more than 45° from the upright
position during transportation.
Tips on saving energy
t Locate your freezer in the coolest area of the room, away from heat
producing appliances or heating ducts and out of the direct sunlight.
t Let hot foods cool to room temperature before placing them in the
freezer. Overloading the freezer forces the compressor to run longer.
Foods that freeze too slowly may lose quality or spoil.
t Wrap foods properly and wipe containers dry before placing them in the
freezer. This cuts down on frost build-up inside the freezer.
t The freezer storage shelves should not be lined with aluminum foil, wax
paper, or paper toweling. Liners interfere with cold air circulation, making
the freezer less efficient.
t Organize and label food to reduce door openings and extended searches.
Remove as many items as needed at one time, and close the door as soon
as possible.
Understanding Alerts
High Temp Alert
The freezer is having trouble maintaining a cold temperature. You will get
this alert if:
t FREEZER MODE: the inside temperature is over 18° F (-8° C) for 36
hours.
t FRIDGE MODE: If the inside temperature is over 59° F (15° C) for 36
hours.
The LED on control panel turns on and a beep sounds. If the temperature
returns to a normal range, the alert turns off. You can also press any
button to turn it off. Here are some possible causes:
t The room is too warm. For example, the freezer is in a garage in the
summer next to a car with a hot engine.
t The ventilation openings are blocked or dusty.
t There is too much frost build up.
t There are door seal gaps.
Temp Out of Range Alert
The freezer is having trouble maintaining its temperature. You will get this
alert if internal temperature is at least 44.6° F (7° C) different from the
temperature you set, 42 hours after you shut the door. If the temperature
returns to a normal range, the alert turns off. You can also pr
ess any
button to turn it off. Here are some possible causes:
t The room is too warm or cold. Adjust the rooms temperature.
12
Switching between Fahrenheit and Celsius
Using the Control Panel
1 Press and hold Lock for three seconds to unlock the control panel.
2 Press and hold / for three seconds to switch settings.
Maintaining your freezer
Your freezer is designed for year-round use with only minimal cleaning
and maintenance. We recommend that you do the following every time
you defrost it to keep your freezer running odor free and efficiently:
1 Unplug your freezer from the wall outlet.
2 Remove all food.
3 Wash the shelves with a mild detergent solution.
4 Wash the inside with a damp warm cloth soaked in a solution of one
quart of lukewarm water to two tablespoons of baking soda solution.
5 Dry the interior and exterior with a soft cloth.
6 Be sure to keep the door gasket (seal) clean to keep the unit running
efficiently.
Storing your freezer
1 Unplug your freezer from the wall outlet.
2 Remove all food.
3 Clean the freezer.
4 Leave the door open slightly to avoid possible formation of
condensation, mold, or odor.
Moving your freezer
1 Unplug your freezer from the wall outlet.
2 Remove all food.
3 Securely tape down all loose items inside your freezer.
4
Tape the door shut.
Caution
To prevent damage to the finish, do not use gasoline, benzine,
thinner, or other solvents, and do not use abrasive cleaners.
Caution
Use extreme caution with children.The unit should not be
accessible to child's play.
12
10
3 Loosen the hex screws on top and bottom of the handle with the hex
wrench (provided) so that you can fit the handle over the extended
head screws in the door.
4 Place the door handle over the heads of the screws, then tighten the
hex screws.
Using your freezer
The storage life of frozen foods varies and the recommended storage time
should not be exceeded.
Place frozen food into the freezer as quickly as possible after purchase. If
there are instructions on the packet, carefully follow these instructions
regarding storage times.
Pre-packed, commercially frozen food should be stored in accordance
with the frozen food manufacturer's instructions for a three star frozen
food storage compartment or home freezer.
Shelves are provided for the organization of odd-shaped items.
1 Plug in your freezer. Wait for 30 minutes, then open the freezer door to
determine if the freezer is working properly.
2 Press and hold Lock for three seconds, then or on the control
panel touch pad to set the temperature inside the freezer. A beep
sounds when the MAX or MIN temperatures are reached.
Hex screws are here.
Extra hex screws are
Provided.
13
10
3 Loosen the hex screws on top and bottom of the handle with the hex
wrench (provided) so that you can fit the handle over the extended
head screws in the door.
4 Place the door handle over the heads of the screws, then tighten the
hex screws.
Using your freezer
The storage life of frozen foods varies and the recommended storage time
should not be exceeded.
Place frozen food into the freezer as quickly as possible after purchase. If
there are instructions on the packet, carefully follow these instructions
regarding storage times.
Pre-packed, commercially frozen food should be stored in accordance
with the frozen food manufacturer's instructions for a three star frozen
food storage compartment or home freezer.
Shelves are provided for the organization of odd-shaped items.
1 Plug in your freezer. Wait for 30 minutes, then open the freezer door to
determine if the freezer is working properly.
2 Press and hold Lock for three seconds, then or on the control
panel touch pad to set the temperature inside the freezer. A beep
sounds when the MAX or MIN temperatures are reached.
Hex screws are here.
Extra hex screws are
Provided.
15
Troubleshooting
Fault indication
If a fault is detected, the display shows one of the following codes. If a
fault is indicated, call for service:
General
Caution
Do not try to repair your freezer yourself.Doing so invalidates the
warranty.
Fault code E2 E5 E7
Description Temperature sensor fault Defrost sensor fault Ambient Temperature sensor fault
Problem Possible cause Possible solution
E2 appears on the
display
Temperature sensor failure. Call for service.
E5 appears on the
display
Defrost sensor failure. Call for service.
E7 appears on the
display
Ambient temperature sensor
failure.
Call for service.
High Temp and Door
Open alerts
See “Understanding Alerts” on page 16.
The freezer does not
operate
The freezer is unplugged. Make sure that the freezer is plugged in and that the plug is
pushed completely into the outlet.
The fuse on the circuit is blown
or the circuit breaker is tripped.
Check the house fuse/circuit breaker box and replace the fuse or
reset the circuit breaker.
Power failure. If a power failure occurs, the freezer turns off. Wait until the
power is restored.
The freezer door does
not close completely
Food packages are interfering
with the door.
Move the food packages or remove some food.
The door gaskets are dirty. Clean the door gaskets.
The freezer may not be level. Level the freezer.
15
Troubleshooting
Fault indication
If a fault is detected, the display shows one of the following codes. If a
fault is indicated, call for service:
General
Caution
Do not try to repair your freezer yourself.Doing so invalidates the
warranty.
Fault code E2 E5 E7
Description Temperature sensor fault Defrost sensor fault Ambient Temperature sensor fault
Problem Possible cause Possible solution
E2 appears on the
display
Temperature sensor failure. Call for service.
E5 appears on the
display
Defrost sensor failure. Call for service.
E7 appears on the
display
Ambient temperature sensor
failure.
Call for service.
HighTemp and Door
Open alerts
See“Understanding Alerts”on page 16.
The freezer does not
operate
The freezer is unplugged. Make sure that the freezer is plugged in and that the plug is
pushed completely into the outlet.
The fuse on the circuit is blown
or the circuit breaker is tripped.
Check the house fuse/circuit breaker box and replace the fuse or
reset the circuit breaker.
Power failure. If a power failure occurs, the freezer turns off. Wait until the
power is restored.
The freezer door does
not close completely
Food packages are interfering
with the door.
Move the food packages or remove some food.
The door gaskets are dirty. Clean the door gaskets.
The freezer may not be level. Level the freezer.
17
Freezer
Safety
Operating
Requirements
Parts and
Features
Installation
Freezer
Use
Freezer
Care
Troubleshooting
Before
Use
PROBLEM POSSIBLE CAUSE SOLUTION
The
compressor
turns on and
off frequently.
The room temperature is
hotter than normal.
This is normal.
A large amount of food
was recently added.
Allow time for the recently
added food to cool, and
then check again.
The door is not closed
completely or was opened
too often.
Check the door gasket and
food distribution to make
sure the door will close
completely.
The freezer has been
disconnected for a period
of time.
Allow 4 hours for the
freezer to cool completely
before adding food.
The temperature control
was not set correctly.
Set the temperature
control to the correct
setting.
Freezer has
an odor
Freezer needs cleaning. Clean the freezer. See,
“Cleaning.
Improperly wrapped food
is giving off an odor.
Wrap food tightly or seal
before storing it in the
freezer.
CONTROL PANEL
PROBLEM CAUSE CORRECTION
The control
panel is
unresponsive
The control panel is
locked.
Press and hold SETTING
for 3 seconds to unlock
the control panel.
ERROR CODES
Code Meanings Cause Solution
Both Flashing
Temperature
sensor fault
Temperature
sensor failure.
Call for
service.
Both Flashing
Defrost sensor
fault
Defrost sensor
failure.
Call for
service.
Both Flashing
Ambient
Temperature
sensor fault
Ambient
temperature
sensor failure.
Call for
service.
17
Freezer
Safety
Operating
Requirements
Parts and
Features
Installation
Freezer
Use
Freezer
Care
Troubleshooting
Before
Use
PROBLEM POSSIBLE CAUSE SOLUTION
The
compressor
turns on and
off frequently.
The room temperature is
hotter than normal.
This is normal.
A large amount of food
was recently added.
Allow time for the recently
added food to cool, and
then check again.
The door is not closed
completely or was opened
too often.
Check the door gasket and
food distribution to make
sure the door will close
completely.
The freezer has been
disconnected for a period
of time.
Allow 4 hours for the
freezer to cool completely
before adding food.
The temperature control
was not set correctly.
Set the temperature
control to the correct
setting.
Freezer has
an odor
Freezer needs cleaning. Clean the freezer. See,
“Cleaning.
Improperly wrapped food
is giving off an odor.
Wrap food tightly or seal
before storing it in the
freezer.
CONTROL PANEL
PROBLEM CAUSE CORRECTION
The control
panel is
unresponsive
The control panel is
locked.
Press and hold SETTING
for 3 seconds to unlock
the control panel.
ERROR CODES
Code Meanings Cause Solution
Both Flashing
Temperature
sensor fault
Temperature
sensor failure.
Call for
service.
Both Flashing
Defrost sensor
fault
Defrost sensor
failure.
Call for
service.
Both Flashing
Ambient
Temperature
sensor fault
Ambient
temperature
sensor failure.
Call for
service.
17
Freezer
Safety
Operating
Requirements
Parts and
Features
Installation
Freezer
Use
Freezer
Care
Troubleshooting
Before
Use
PROBLEM POSSIBLE CAUSE SOLUTION
The
compressor
turns on and
off frequently.
The room temperature is
hotter than normal.
This is normal.
A large amount of food
was recently added.
Allow time for the recently
added food to cool, and
then check again.
The door is not closed
completely or was opened
too often.
Check the door gasket and
food distribution to make
sure the door will close
completely.
The freezer has been
disconnected for a period
of time.
Allow 4 hours for the
freezer to cool completely
before adding food.
The temperature control
was not set correctly.
Set the temperature
control to the correct
setting.
Freezer has
an odor
Freezer needs cleaning. Clean the freezer. See,
“Cleaning.”
Improperly wrapped food
is giving off an odor.
Wrap food tightly or seal
before storing it in the
freezer.
CONTROL PANEL
PROBLEM CAUSE CORRECTION
The control
panel is
unresponsive
The control panel is
locked.
Press and hold SETTING
for 3 seconds to unlock
the control panel.
ERROR CODES
Code Meanings Cause Solution
Both Flashing
Temperature
sensor fault
Temperature
sensor failure.
Call for
service.
Both Flashing
Defrost sensor
fault
Defrost sensor
failure.
Call for
service.
Both Flashing
Ambient
Temperature
sensor fault
Ambient
temperature
sensor failure.
Call for
service.
15
Troubleshooting
Fault indication
If a fault is detected, the display shows one of the following codes. If a
fault is indicated, call for service:
General
Caution
Do not try to repair your freezer yourself. Doing so invalidates the
warranty.
Fault code E2 E5 E7
Description Temperature sensor fault Defrost sensor fault Ambient Temperature sensor fault
Problem Possible cause Possible solution
E2 appears on the
display
Temperature sensor failure. Call for service.
E5 appears on the
display
Defrost sensor failure. Call for service.
E7 appears on the
display
Ambient temperature sensor
failure.
Call for service.
HighTemp and Door
Open alerts
See“Understanding Alerts”on page 16.
The freezer does not
operate
The freezer is unplugged. Make sure that the freezer is plugged in and that the plug is
pushed completely into the outlet.
The fuse on the circuit is blown
or the circuit breaker is tripped.
Check the house fuse/circuit breaker box and replace the fuse or
reset the circuit breaker.
Power failure. If a power failure occurs, the freezer turns off. Wait until the
power is restored.
The freezer door does
not close completely
Food packages are interfering
with the door.
Move the food packages or remove some food.
The door gaskets are dirty. Clean the door gaskets.
The freeze
r may not be level. Level the freezer.
15
Troubleshooting
Fault indication
If a fault is detected, the display shows one of the following codes. If a
fault is indicated, call for service:
General
Caution
Do not try to repair your freezer yourself.Doing so invalidates the
warranty.
Fault code E2 E5 E7
Description Temperature sensor fault Defrost sensor fault Ambient Temperature sensor fault
Problem Possible cause Possible solution
E2 appears on the
display
Temperature sensor failure. Call for service.
E5 appears on the
display
Defrost sensor failure. Call for service.
E7 appears on the
display
Ambient temperature sensor
failure.
Call for service.
HighTemp and Door
Open alerts
See“Understanding Alerts”on page 16.
The freezer does not
operate
The freezer is unplugged. Make sure that the freezer is plugged in and that the plug is
pushed completely into the outlet.
The fuse on the circuit is blown
or the circuit breaker is tripped.
Check the house fuse/circuit breaker box and replace the fuse or
reset the circuit breaker.
Power failure. If a power failure occurs, the freezer turns off. Wait until the
power is restored.
The freezer door does
not close completely
Food packages are interfering
with the door.
Move the food packages or remove some food.
The door gaskets are dirty. Clean the door gaskets.
The freeze
r may not be level. Level the freezer.
17
Freezer
Safety
Operating
Requirements
Parts and
Features
Installation
Freezer
Use
Freezer
Care
Troubleshooting
Before
Use
PROBLEM POSSIBLE CAUSE SOLUTION
The
compressor
turns on and
off frequently.
The room temperature is
hotter than normal.
This is normal.
A large amount of food
was recently added.
Allow time for the recently
added food to cool, and
then check again.
The door is not closed
completely or was opened
too often.
Check the door gasket and
food distribution to make
sure the door will close
completely.
The freezer has been
disconnected for a period
of time.
Allow 4 hours for the
freezer to cool completely
before adding food.
The temperature control
was not set correctly.
Set the temperature
control to the correct
setting.
Freezer has
an odor
Freezer needs cleaning. Clean the freezer. See,
“Cleaning.”
Improperly wrapped food
is giving off an odor.
Wrap food tightly or seal
before storing it in the
freezer.
CONTROL PANEL
PROBLEM CAUSE CORRECTION
The control
panel is
unresponsive
The control panel is
locked.
Press and hold SETTING
for 3 seconds to unlock
the control panel.
ERROR CODES
Code Meanings Cause Solution
Both Flashing
Temperature
sensor fault
Temperature
sensor failure.
Call for
service.
Both Flashing
Defrost sensor
fault
Defrost sensor
failure.
Call for
service.
Both Flashing
Ambient
Temperature
sensor fault
Ambient
temperature
sensor failure.
Call for
service.
17
Freezer
Safety
Operating
Requirements
Parts and
Features
Installation
Freezer
Use
Freezer
Care
Troubleshooting
Before
Use
PROBLEM POSSIBLE CAUSE SOLUTION
The
compressor
turns on and
off frequently.
The room temperature is
hotter than normal.
This is normal.
A large amount of food
was recently added.
Allow time for the recently
added food to cool, and
then check again.
The door is not closed
completely or was opened
too often.
Check the door gasket and
food distribution to make
sure the door will close
completely.
The freezer has been
disconnected for a period
of time.
Allow 4 hours for the
freezer to cool completely
before adding food.
The temperature control
was not set correctly.
Set the temperature
control to the correct
setting.
Freezer has
an odor
Freezer needs cleaning. Clean the freezer. See,
“Cleaning.”
Improperly wrapped food
is giving off an odor.
Wrap food tightly or seal
before storing it in the
freezer.
CONTROL PANEL
PROBLEM CAUSE CORRECTION
The control
panel is
unresponsive
The control panel is
locked.
Press and hold SETTING
for 3 seconds to unlock
the control panel.
ERROR CODES
Code Meanings Cause Solution
Both Flashing
Temperature
sensor fault
Temperature
sensor failure.
Call for
service.
Both Flashing
Defrost sensor
fault
Defrost sensor
failure.
Call for
service.
Both Flashing
Ambient
Temperature
sensor fault
Ambient
temperature
sensor failure.
Call for
service.
17
Freezer
Safety
Operating
Requirements
Parts and
Features
Installation
Freezer
Use
Freezer
Care
Troubleshooting
Before
Use
PROBLEM POSSIBLE CAUSE SOLUTION
The
compressor
turns on and
off frequently.
The room temperature is
hotter than normal.
This is normal.
A large amount of food
was recently added.
Allow time for the recently
added food to cool, and
then check again.
The door is not closed
completely or was opened
too often.
Check the door gasket and
food distribution to make
sure the door will close
completely.
The freezer has been
disconnected for a period
of time.
Allow 4 hours for the
freezer to cool completely
before adding food.
The temperature control
was not set correctly.
Set the temperature
control to the correct
setting.
Freezer has
an odor
Freezer needs cleaning. Clean the freezer. See,
“Cleaning.”
Improperly wrapped food
is giving off an odor.
Wrap food tightly or seal
before storing it in the
freezer.
CONTROL PANEL
PROBLEM CAUSE CORRECTION
The control
panel is
unresponsive
The control panel is
locked.
Press and hold SETTING
for 3 seconds to unlock
the control panel.
ERROR CODES
Code Meanings Cause Solution
Both Flashing
Temperature
sensor fault
Temperature
sensor failure.
Call for
service.
Both Flashing
Defrost sensor
fault
Defrost sensor
failure.
Call for
service.
Both Flashing
Ambient
Temperature
sensor fault
Ambient
temperature
sensor failure.
Call for
service.
14
10
3 Loosen the hex screws on top and bottom of the handle with the hex
wrench (provided) so that you can fit the handle over the extended
head screws in the door.
4 Place the door handle over the heads of the screws, then tighten the
hex screws.
Using your freezer
The storage life of frozen foods varies and the recommended storage time
should not be exceeded.
Place frozen food into the freezer as quickly as possible after purchase. If
there are instructions on the packet, carefully follow these instructions
regarding storage times.
Pre-packed, commercially frozen food should be stored in accordance
with the frozen food manufacturer's instructions for a three star frozen
food storage compartment or home freezer.
Shelves are provided for the organization of odd-shaped items.
1 Plug in your freezer. Wait for 30 minutes, then open the freezer door to
determine if the freezer is working properly.
2 Press and hold Lock for three seconds, then or on the control
panel touch pad to set the temperature inside the freezer. A beep
sounds when the MAX or MIN temperatures are reached.
Hex screws are here.
Extra hex screws are
Provided.
16
Food in the freezer is
not cold
The door has been opened too
often or was not closed properly.
Make sure that the door is closed properly.
You have just added a large
amount of food to the freezer.
Allow time for the new food to cool, then check again.
The door is not closed
completely.
Check the door gasket and food distribution and make sure that
the door closes completely.
The freezer has recently been
disconnected for a period of
time.
Allow time for the freezer to cool before adding food. Four
hours are required for the freezer to cool down completely.
The thermostat is set too warm. Set the thermostat to a colder setting.
The freezer makes
unusual noises or
vibrations
The freezer may not be level on
the floor.
Level the freezer with the leveling feet.
The body of the freezer is
touching a wall.
Move the freezer out from the wall.
Metal parts undergo expansion
and contraction.
This is normal.
Refrigerant is circulating
throughout the system.
This is normal.
Moisture is building up
in the interior of the
freezer
The door has been opened too
often or was not closed properly.
Make sure that the door is closed properly.
The freezer is in a location that is
very humid.
Move the freezer to a dryer location.
The weather is hot and humid. This is normal.
The freezer door does
not close completely
Food packages are interfering
with the door.
Move the food packages or remove some food.
The door gaskets are dirty. Clean the door gaskets.
The freezer is not level. Level the freezer with the leveling feet.
The compressor turns
on and off frequently.
The room temperature is hotter
than normal.
This is normal.
You have just added a large
amount of food to the freezer.
Allow time for the new food to cool, then check again.
The door is not closed
completely or was opened too
often.
Check the door gasket and food distribution and make sure that
the door closes completely.
The freezer has recently been
disconnected for a period of
time.
Allow time for the freezer to cool before adding food. Four
hours are required for the freezer to cool down completely.
The thermostat was not set
correctly.
Set the thermostat to the correct setting.
Problem Possible cause Possible solution
17
Freezer
Safety
Operating
Requirements
Parts and
Features
Installation
Freezer
Use
Freezer
Care
Troubleshooting
Before
Use
PROBLEM POSSIBLE CAUSE SOLUTION
The
compressor
turns on and
off frequently.
The room temperature is
hotter than normal.
This is normal.
A large amount of food
was recently added.
Allow time for the recently
added food to cool, and
then check again.
The door is not closed
completely or was opened
too often.
Check the door gasket and
food distribution to make
sure the door will close
completely.
The freezer has been
disconnected for a period
of time.
Allow 4 hours for the
freezer to cool completely
before adding food.
The temperature control
was not set correctly.
Set the temperature
control to the correct
setting.
Freezer has
an odor
Freezer needs cleaning. Clean the freezer. See,
“Cleaning.”
Improperly wrapped food
is giving off an odor.
Wrap food tightly or seal
before storing it in the
freezer.
CONTROL PANEL
PROBLEM CAUSE CORRECTION
The control
panel is
unresponsive
The control panel is
locked.
Press and hold SETTING
for 3 seconds to unlock
the control panel.
ERROR CODES
Code Meanings Cause Solution
Both Flashing
Temperature
sensor fault
Temperature
sensor failure.
Call for
service.
Both Flashing
Defrost sensor
fault
Defrost sensor
failure.
Call for
service.
Both Flashing
Ambient
Temperature
sensor fault
Ambient
temperature
sensor failure.
Call for
service.
17
Freezer
Safety
Operating
Requirements
Parts and
Features
Installation
Freezer
Use
Freezer
Care
Troubleshooting
Before
Use
PROBLEM POSSIBLE CAUSE SOLUTION
The
compressor
turns on and
off frequently.
The room temperature is
hotter than normal.
This is normal.
A large amount of food
was recently added.
Allow time for the recently
added food to cool, and
then check again.
The door is not closed
completely or was opened
too often.
Check the door gasket and
food distribution to make
sure the door will close
completely.
The freezer has been
disconnected for a period
of time.
Allow 4 hours for the
freezer to cool completely
before adding food.
The temperature control
was not set correctly.
Set the temperature
control to the correct
setting.
Freezer has
an odor
Freezer needs cleaning. Clean the freezer. See,
“Cleaning.”
Improperly wrapped food
is giving off an odor.
Wrap food tightly or seal
before storing it in the
freezer.
CONTROL PANEL
PROBLEM CAUSE CORRECTION
The control
panel is
unresponsive
The control panel is
locked.
Press and hold SETTING
for 3 seconds to unlock
the control panel.
ERROR CODES
Code Meanings Cause Solution
Both Flashing
Temperature
sensor fault
Temperature
sensor failure.
Call for
service.
Both Flashing
Defrost sensor
fault
Defrost sensor
failure.
Call for
service.
Both Flashing
Ambient
Temperature
sensor fault
Ambient
temperature
sensor failure.
Call for
service.
15
10
3 Loosen the hex screws on top and bottom of the handle with the hex
wrench (provided) so that you can fit the handle over the extended
head screws in the door.
4 Place the door handle over the heads of the screws, then tighten the
hex screws.
Using your freezer
The storage life of frozen foods varies and the recommended storage time
should not be exceeded.
Place frozen food into the freezer as quickly as possible after purchase. If
there are instructions on the packet, carefully follow these instructions
regarding storage times.
Pre-packed, commercially frozen food should be stored in accordance
with the frozen food manufacturer's instructions for a three star frozen
food storage compartment or home freezer.
Shelves are provided for the organization of odd-shaped items.
1 Plug in your freezer. Wait for 30 minutes, then open the freezer door to
determine if the freezer is working properly.
2 Press and hold Lock for three seconds, then or on the control
panel touch pad to set the temperature inside the freezer. A beep
sounds when the MAX or MIN temperatures are reached.
Hex screws are here.
Extra hex screws are
Provided.
18
Sp ations
Dimensions (WxDxH) 21 cu.ft. - 32.8 x 28.9 x 76.8 in. (83.2 x 73.5 x 195 cm)
Net Weight 198.4 lbs. (90 kg)
Power requirements 115 V ~ 60 Hz
Power cord length 65 in. (165 cm)
Refrigerator Warranty
Your REFRIGERATOR has been inspected and tested and is warranted subject to following for a period to 12 months from the
date of purchase against defects in workmanship and materials. During this period, we undertake to repair or replace any
defective part which was originally defective in our opinion. This warranty is null and void if the appliance is used for commercial
purposes.
This warranty is valid only when:
1. This appliance has not been opened or tampered with by any unauthorized person.
2. The appliance is brought to and taken from the retailer at the customer’s cost and risk.
3. The warranty card and Cash Memo duly signed by the authorized retailer are present with the complaint.
4. The appliance has been installed, used and maintained in accordance with the instruction manual.
The warranty does NOT apply for:
1. Damages due to chipping, peeling of coating and denting.
2. Breakage or damage to components made of Bakelite, plastic materials, rubber parts and cord.
3. Normal wear and tear of parts.
4. Damage resulting from accident, mishandling or negligence on the part of the customer. Liability for consequential loss
or damage is neither accepted nor implied.
1870 Bath Avenue, Suite 3 | Brooklyn, NY 11214 | Tel: 718.249.1217 | support@forteappliances.com |
www.forteappliances.com
SECOND THROUGH FIFTH YEAR FULL WARRANTY ON SYSTEM PARTS AS LISTED In the second through fifth years from the date
of purchase, when this refrigerator is operated and maintained according to instructions attached to or furnished with the
product, Forte Appliances will pay for replacement parts and repair labor costs to correct defects in materials or workmanship in
system. These parts are: compressor, evaporator, condenser, dryer, and connecting tubing.
FORTE Appliances will not pay for:
1. Service calls to correct the installation of your refrigerator, to instruct you how to use your refrigerator, to replace house
fuses or correct house wiring or plumbing, to replace light bulbs, or replacement water filters other than as noted above.
2. Repairs when your refrigerator is used in other than normal, single-family household use.
3. Pickup and delivery. Your refrigerator is designed to be repaired in the home.
4. Damage resulting from accident, alteration, misuse, abuse, fire, flood, improper installation, acts of God, or use of products
not approved by FORTE Appliances
5. Any food loss due to product failure.
6. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.
7. Replacement parts or repair labor costs for units operated outside the United States or Canada.
8. Travel or transportation expenses for customers who reside in remote areas.
9. Any labor costs for replacement of the water filter during the limited warranty period.
/