Installing your refrigerator
Bringing it all together
Installing your refrigerator
20
Door Reverse
3.Take o the middle hinge by removing the screws. L the freezer door up and move it away.
Remove the screw cap covers that are on the
of the unit and m on to the opposite side
4. Remove the hinge plug from the top of freezer door and
it to the opposite side. Then remove
hinge stopper from the bo
om of the freezer door and it to the opposite side, ensuring it is
securely. Tilt the appliance carefully, no more 45 degrees and remove the adjustable foot.
Take o the
bo
om hinge by
removing the screws. Rea the hinge to the side of the appliance, reinstall
the adjustable feet and place the freezer door back on.
Middle hinge
Screw cap covers
Adjustable foot
Stopper
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,