Model no: SJ140B
Batch no: PR3813
PLEASE READ AND RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
THIS APPLIANCE IS INTENDED FOR HOUSEHOLD USE ONLY.
The illustrations used in this manual are to illustrate the operation method and product structure of the
product. Where there is a small difference between the physical item and the illustrations, please take the
physical as the standard.
FEATURES:
• Continuous juice extraction.
• Easy feed chute.
• High yield with minimal separation and foaming.
• Low speed.
• Slag cup (pulp cup) and juice container included.
• Automatic juice mixing.
• Two step safety start system – all parts must be assembled correctly, and the lid must be locked into
position correctly. This assures safe operation.
• The powerful and efficient low speed motor processes high fibre fruit and vegetables effortlessly without
overheating.
• The motor operates quietly, extracting juice quickly with a higher yield.
• Convenient rinsing: Simply pour water into the slow juicer between each recipe to rinse without
disassembly during an extended juicing session of up to 30 minutes.
DANGER:
- Do not immerse the housing in water or rinse under the tap due to the electronic components.
- Avoid any liquid from entering into the appliances main body to protect from electric shock or short-
circuit.
WARNING:
- Check if the voltage indicated on the appliance fits the local mains voltage.
- Do not use the appliance if there is any damage on plug, main cord or other parts.
- Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is
dropped or damaged in any manner. Return the appliance to the nearest authorized service facility for
examination, repair or electrical or mechanical adjustment.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
- Keep the appliance and its mains cord out of the reach of children.
- Keep the mains cord away from hot surfaces.
- Always make sure that the plug is inserted into the wall socket properly.
- Do not connect appliance to an external timer switch.
- Do not place anything on top of the appliance.
- Do not use the appliance for any other purpose than described in this manual.
- Do not let the appliance operate unattended.
- Immediately unplug the appliance if you see dark smoke coming out of the appliance. Wait for the smoke
emission to stop before you remove the pan from the appliance.
CAUTION:
- This appliance is not intended for use by persons (including children) with reduced physical sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance. To protect children from
the dangers posed by electrical appliance, make sure that the cable is not hanging low and that children do
not have access to the appliance.
- Ensure the appliance in placed on a horizontal, even and stable surface.
- This appliance is designed for household use only. It may not suitable to be safely used in environments
such as staff kitchens, farms, motels, and other non-residential environments.
- The guarantee is invalid if the appliance is used for professional or semi-professional purposes or it is not
used according to instructions.
- Always unplug the appliance while not in use.
- Unplug from outlet when not in use, before assembling or taking off parts and before cleaning.
- Avoid contact of moving parts.
- Do not use attachments not recommended or sold by the manufacturer may as it may lead to fire, electric
shock or injury.
- Always ensure you switch the juicer to the off position and the motor has stopped completely before
disassembling.
- Do not put your fingers or a foreign object into the juicer while it is in operation. If food becomes lodged
in the inlet use the plunger to push it down, or use the reverse button on the machine to dislodge. If this is
not possible, turn juicer off and for motor to completely stop before disassembling juicer to remove food.
- Do not use outdoors.
- Lift appliance with the handle only.
- Do not put any parts into the dishwasher. No parts are dishwasher-safe.
- Do not use appliance for more than 30 minutes continuously as the motor may burn out; do not use it
again until the appliance has cooled down. The cool down period after 30 minutes of use is 60 minutes.
- Do not use the appliance to juice hard materials, including pips, ice, frozen fruit, large seeds.
- Switch off the appliance and disconnect from supply before changing accessories or approaching parts
that move in use.
- Do not use the appliance if the rotating sieve is damaged.
INSTALLATION AND OPERATING INSTRUCTIONS:
1. Push rod
2. Feed tube
3. Rotating propeller
4. Filter
5. Doctor blade
6. Outer cup
7. Main body
8. Switch
9. Foot pad
10. Juice cup
11. Slag cup
Note: Do not pre-operate before inputting materials or do not operate with an empty bowl.
Important: The hopper edge must point to close sign on the base in order for the machine to
operate properly.
ASSEMBLY INSTRUCTIONS:
Important: Prior to Assembling the juicer please check this point- at the base of the bowl there is a
rubber stopper. When in place the stopper ensures all of the juice only exits via the juice outlet.
Before Juicing, always ensure that the rubber stopper is firmly in place.
1. Assemble the outer cup on the main body.
A B
A) Make sure the outer cup is all the way into the shaft of the base.
B) Turn the outer cup clockwise. Let the sharp corners of the two triangles be positive.
2. Insert the Filter into the doctor blade.
3. Put the Filter and Doctor blade into the outer cup.
Let the sharp corners of the two triangles (one on the edge of the filter, another one on the edge of
the outer cup) align.
4. Insert the Rotating propeller into the Filter and turn it until it drops into position.
5. Assemble the Feed tube onto the outer cup.
First, ensure the sharp corners of the two triangles are aligned. Then clockwise twist the Feed tube
so that the outer cup’s triangle align has aligned with the feed tube’s rectangle.
6. Add the lid to the unit and lock it into place.
OPERATING INSTRUCTIONS:
Important:
•
Do not operate the juicer with wet hands as it may cause an electric shock.
•
Do not operate the juicer prior to imputing juicing materials.
•
Do not operate for more than 30 minutes at one time. Allow the juicer to cool down for 1
hour before using it again.
1. Plug in the juicer.
2. Place the juice cup under the juicer outlet and the slag cup under the slag outlet.
3. The juicer power button (located at the Main body side) has 3 positions.
A. ON-This starts the motor and juicing process
B. OFF-Is the central position of the button. It switches off the appliance.
C. REV-Is reverse. Only use this function when something is stuck in the juicer and it needs to
be unclogged.
4. Insert the material you wish to juicer into the Feed tube;
•
Ensure pieces are not larger than 4cm for optimal juicer extraction.
•
Remove any large pips or seeds
•
Always pre-wash food before juicing.
•
Do not overstuff the Feed tube or force food in. Insert food slowly to allow juicer time to
work. The pusher is only be used if food becomes stuck.
5. Switch the power button to “ON”.
•
Insert food slowly to allow juicer time to work.
•
Do not overstuff the Feed tube or force food in. The pusher is only to be used if food
becomes stuck.
6. When you are finished switch the power button to ‘OFF’.
IF THE MACHINE BECOMES CLOGGED AND INOPERABLE:
1. Turn the machine off and press the reverse button for a few seconds then try operating again.
Note: The reverse button works with a ‘pulse’ motion.
2. If the reverse button does not work, turn off the machine and switch off at the power point.
Disassemble the unit to dislodge any food then reassemble as per the instructions and try again.
HOW TO DISASSEMBLE AND CLEAN THE UNIT:
1. Switch off the unit.
2. Twist the outer cup and Feed tube as one piece to the right so that the arrow on the Feed tube
moves away from the closed position. Lift off .
3. Disassemble the parts in the order show in the assembly diagram.
4. Use the brush to clean all of these parts thoroughly in warm soapy water then dry thoroughly.
5. Use a damp cloth to wipe down the base of the unit.
6. Do not wash any parts in the dishwasher. There are no dishwasher safe parts.
CLEANING TIPS:
• Periodically remove the silicone Doctor blade from the spinning blade frame and clean thoroughly
before reassembling.
• Thoroughly clean immediately after each use to minimize staining.
• Pull out the rubber stopper on the base of the outer cup to clean outer cup effectively. Always
ensure the rubber stopper is re-inserted prior to juicing otherwise it may cause a leak.
• Do not use harsh abrasives or chemicals to clean the juicer.
TECHNICAL DATA:
Input voltage:220-240V, 50/ 60Hz
Power: 200W
Maximum operation time: 30 minutes continuous use
TROUBLE SHOOTING:
Problem
Possible Causes
What To Do
Start fault
The power lead is not
inserted correctly.
Ensure the power lead has been
inserted correctly.
The lid of the slow juicer is
not on correctly.
Ensure the lid is installed correctly.
Interruption in the
process
The slow juicer is overloaded
with food.
Do not over stuff the feeding tube or
force food into it.
Insert food slowly to allow the slow
juicer time to work.
The push rod is only to be used if
food becomes stuck.
The slow juicer has worked
over the operation time.
The use time is 30 minutes.
After 30 minutes of use, the rest
time is 1 hour.
Abnormal noise
The slow juicer is not on a
stable surface.
Ensure the slow juicer is used on a
smooth and steady surface and not
on an angle.
The lid for the slow
juicer cannot be
installed correctly or
cannot be opened
The lid for the slow juicer
canot be installed correctly.
Ensure the rotating propeller is in the
correctly place.
The lid is stick.
Check the residue, press the button
to get the residue back into the input
port.
The juice yield is low
Every ingredient yields
different amounts of juice.
Soak the ingredients in water before
extracting if they are dry or not
fresh.
When extracting foods such as
carrots or beetroot, extract with a
combination of other fruit or
vegetables with more water content
to increase the juice yield.
Ensure pieces are no larger then 4cm
for optimal juicer extraction.
There is a separation
in the juice extracted
There may be a separation in
the juice due to the
ingredient’s density after
extraction.
This is normal.
/
