ICMPFM3B02

Chief ICMPFM3B02, ICLPFM3B02, ICLPFM3B03, ICMPFM3B03, ICXPFM3B03 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Chief ICMPFM3B02 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
iC-PFM3 Series
iCMPFM3
iCLPFM3
iCXPFM3
Installation Instructions
Instrucciones de instalaciรณn
Installationsanleitung
Instruรงรตes de Instalaรงรฃo
Istruzioni di installazione
Installatie-instructies
Instructions dยดinstallation
๎‰‚๎‰ง๎‰ซ๎‰ฌ๎‰š๎‰ฅ๎‰น๎‰ฐ๎‰ข๎‰จ๎‰ง๎‰ง๎‰ต๎‰Ÿ๎€ƒ๎‰‚๎‰ง๎‰ซ๎‰ฌ๎‰ช๎‰ญ๎‰ค๎‰ฐ๎‰ข๎‰ข
Installationsinstruktioner
Monteringsanvisningar
Asennusohjeet
Instrukcja instalacji
๎ˆ…๎„ฏ๎ˆ˜๎ˆ–๎ˆ“๎„ฐ๎ˆข๎€ƒ๎„ฐ๎ˆ–๎ˆ›๎„ฎ๎„ฒ๎ˆ๎„ฑ๎„ฒ๎„ฎ๎„ฑ๎ˆ˜๎ˆข
Kurulum Yรถnergeleri
ร–sszeszerelรฉsi utasรญtรกsok
iC-PFM3 Series Installation Instructions
2
DISCLAIMER
Milestone AV Technologies, and its affiliated corporations and
subsidiaries (collectively, "Milestone"), intend to make this
manual accurate and complete. However, Milestone makes no
claim that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Milestone
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Milestone assumes
no responsibility for accuracy, completeness or sufficiency of
the information contained in this document.
Chiefยฎ and Centrisโ„ข are trademarks of Milestone AV
Technologies. All rights reserved.
IMPORTANT WARNINGS
AND CAUTIONS!
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installerโ€™s responsibility to make sure all components are
properly assembled and installed using the instructions
provided.
WARNING: Failure to provide adequate structural strength
for this component can result in serious personal injury or
damage to equipment! It is the installerโ€™s responsibility to
make sure the structure to which this component is attached
can support five times the combined weight of all equipment.
Reinforce the structure as required before installing the
component. The wall to which the mount is being attached
may have a maximum drywall thickness of 5/8" (15.9mm).
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installerโ€™s responsibility to make sure the combined weight of
all components attached does not exceed 125 lbs (56.7 kg)
for the iCMPFM3 and iCLPFM3 or 175 lbs (79.4 kg) for the
iCXPFM3. Use with products heavier than the maximum
weight indicated may result in collapse of the mount and its
accessories causing possible injury.
i
AVISOS Y PRECAUCIONES
IMPORTANTES!
AVISO: Un AVISO llama su atenciรณn sobre la posibilidad de
sufrir lesiones de gravedad o incluso mortales si no sigue las
instrucciones.
PRECAUCIร“N: Una nota de PRECAUCIร“N llama su
atenciรณn sobre la posibilidad de daรฑar o destruir
el equipo si no sigue las instrucciones.
AVISO: Si no lee, comprende perfectamente y sigue todas
las instrucciones, podrรญa causar daรฑos graves, daรฑos
personales y materiales o anular la garantรญa de fรกbrica. El
instalador es el responsable de asegurarse de que todos los
componentes estรกn correctamente montados e instalados
siguiendo las instrucciones indicadas.
AVISO: Si no se proporciona la resistencia estructural
adecuada para este componente, podrรญan provocarse graves
daรฑos personales o materiales. El instalador es el
responsable de asegurarse de que la estructura a la que este
componente estรก sujeta puede soportar cinco veces el peso
combinado de todo el equipo. Refuerce la estructura segรบn
sea necesario antes de instalar el componente. El grosor
mรกximo del tabique donde se va a instalar el soporte debe
ser de 5/8" (15,9mm).
AVISO: Si se excede el peso mรกximo, podrรญan causarse
graves daรฑos personales o materiales. El instalador es
responsable de asegurarse de que el peso combinado de
todos los componentes unidos no exceda los 56,7 kg
(125 libras) para el iCMPFM3 y el iCLPFM3 o 79,4 kg
(175 libras) para el iCXPFM3. Si se utilizan productos que
superen el peso mรกximo indicado podrรญan caerse el soporte
y sus accesorios, resultando en lesiones.
WICHTIGE WARN- und
VORSICHTSHINWEISE!
WARNUNG: Ein WARNHINWEIS macht auf mรถgliche
schwere oder tรถdliche Verletzungen aufmerksam, die bei
Nichtbefolgung der Anweisungen eintreten kรถnnen.
VORSICHT: Ein VORSICHTSHINWEIS macht auf Schรคden
oder mรถgliche Zerstรถrung des Gerรคts aufmerksam, die bei
Nichtbefolgung der Anweisungen eintreten kรถnnen.
iC-PFM3 Series Installation Instructions
8
DIMENSIONS - iCMPFM3
DIMENSIONS - iCLPFM3
16.50
419.1
17.68
MAX
449
22.00
558.8
11.00
279.4
15.75
MAX
400
7.87 TOP MOUNTING
HOLE TO CENTERLINE
ARROW ON THE
WALL PLATE
200
7.00
WALL PLATE
OPENING
177.8
2.50
TO BOTTOM OF
WALL PLATE
OPENING
63.5
KICKSTAND
CORDS
.79
20.1
11.49
291.8
8.38
212.7
4X
DISPLAY
WALL
- CABLE ACCESS
WHEN KICKSTAND
IS ACTIVATED
- DISPLAY TILTS
BACK 5
7.00
WALL PLATE
OPENING
177.8
2.50
CENTERLINE
TO BOTTOM OF
WALL PLATE
OPENING
63.5
16.50
419.1
15.75
MAX
400
30.75
781.1
MAX
26.38
[670]
TOP MOUNTING
HOLE TO CENTERLINE
WALL PLATE
200
KICKSTAND
CORDS
.79
11.49
291.8
8.38
212.7
DETAIL A
SCALE 1 : 2
ORIENTATION
AND CENTERLINE
ARROW
DETAIL B
SCALE 1 : 2
CENTERLINE
DIAMOND
DISPLAY
WALL
Installation Instructions iC-PFM3 Series
9
DIMENSIONS - iCXPFM3
7.00
WALL PLATE
OPENING
177.8
9.84
TOP MOUNTING
HOLE TO CENTERLINE
ARROW ON THE
WALL PLATE
250
2.50
CENTERLINE
TO BOTTOM OF
WALL PLATE
OPENING
63.5
19.00
482.6
33.68
MAX
855.4
38.00
965.2
19.69
MAX
500
20.50
520.7
KICKSTAND
CORDS
.79
11.49
291.8
8.38
212.7
DETAIL A
SCALE 1 : 2
AND CENTERLINE
ARROW
DETAIL B
SCALE 1 : 2
CENTERLINE
DIAMOND
DISPLAY
WALL
iC-PFM3 Series Installation Instructions
10
LEGEND
Tighten Fastener
Apretar elemento de fijaciรณn Stram fastspรฆndingsbeslag
Befestigungsteil festziehen Skruva รฅt fรคste
Apertar fixador Kiristรค kiinnike
Serrare il fissaggio Dokr๎„Šci๎ƒผ element mocuj๎„…cy
Bevestiging vastdraaien ๎ˆˆ๎„ณ๎ˆ“๎ˆŸ๎ˆš๎ˆ๎ˆ ๎€ƒ๎ˆˆ๎ˆฃ๎ˆž๎„ฏ๎ˆ‘๎„ฑ๎ˆ๎ˆ ๎ˆฃ
Serrez les fixations Ba๎ƒทlant๎ƒ•๎œ๎ƒ• S๎ƒ•๎Ž๎ƒ•๎ƒบ๎—๎ƒ•๎•๎ƒ•n
๎‰‹๎‰จ๎‰ ๎‰ฆ๎‰ข๎‰ฌ๎‰Ÿ๎€ƒ๎‰๎‰š๎‰ซ๎‰ฌ๎‰Ÿ๎‰ ๎‰ค๎‰ญ Rรถgzรญt๎„˜ meghรบzรกsa
Loosen Fastener
Aflojar elemento de fijaciรณn Lรธsgรธr fastspรฆndingsbeslag
Befestigungsteil lรถsen Lossa fรคste
Desapertar fixador Irrota kiinnike
Allentare il fissaggio
Poluzowa๎ƒผ element mocuj๎„…cy
Bevestiging losdraaien ๎ˆ‹๎„ฎ๎ˆœ๎ˆ๎ˆก๎ˆฆ๎„ฑ๎ˆ˜๎€ƒ๎ˆˆ๎ˆฃ๎ˆž๎„ฏ๎ˆ‘๎„ฑ๎ˆ๎ˆ ๎ˆฃ
Desserrez les fixations Ba๎ƒทlant๎ƒ•๎œ๎ƒ• Gev๎ƒบetin
๎‰ˆ๎‰ซ๎‰ฅ๎‰š๎‰›๎‰ถ๎‰ฌ๎‰Ÿ๎€ƒ๎‰๎‰š๎‰ซ๎‰ฌ๎‰Ÿ๎‰ ๎‰ค๎‰ญ Rรถgzรญt๎„˜ kilazรญtรกsa
Phillips Screwdriver
Destornillador Phillips Stjerneskuetrรฆkker
Kreuzschlitzschraubendreher Krysskruvmejsel
Chave de fendas Phillips Ristipรครคruuviavain
Cacciavite a stella ๎„rubokr๎„Št krzy๎„ชakowy
Kruiskopschroevendraaier ๎ˆ€๎„ฎ๎„ฒ๎„ฑ๎„ฎ๎ˆ•๎ˆ“๎„ฏ๎ˆš Phillips
Tournevis ร  pointe cruciforme Phillips Tornavida
๎‰ˆ๎‰ฌ๎‰œ๎‰Ÿ๎‰ช๎‰ฌ๎‰ค๎‰š Csillagfej๎„ฆ csavarhรบzรณ
By Hand
A mano Med hรฅnden
Von Hand Fรถr hand
Com a mรฃo Kรคsin
A mano ๎€ต๎„Šcznie
Met de hand ๎ˆ‚๎„ฐ๎€ƒ๎„ฒ๎ˆ ๎€ƒ๎ˆค๎ˆ‘๎ˆก๎ˆš
ร€ la main El ๎ƒธle
๎ˆผ๎‰ช๎‰ญ๎‰ฑ๎‰ง๎‰ญ๎‰ธ Kรฉzzel
Hammer
Martillo Hammer
Hammer Hammare
Martelo Vasara
Martello ๎€ฐ๎ƒกotek
Hamer ๎ˆˆ๎„ณ๎ˆฃ๎ˆก๎ˆ“
Marteau ร‡ekiรง
๎‰†๎‰จ๎‰ฅ๎‰จ๎‰ฌ๎‰จ๎‰ค Kalapรกcs
Pencil Mark
Marcar con lรกpiz Blyantmรฆrke
Stiftmarkierung Pennmarkering
Marcar com lรกpis Piirretty merkki
Segno a matita Oznaczenie o๎ƒกรณwkiem
Potloodmerkteken ๎ˆˆ๎ˆ˜๎ˆ๎ˆ๎„ฏ๎ˆš๎€ƒ๎ˆ๎„ฐ๎€ƒ๎ˆ๎ˆ ๎ˆœ๎ˆช๎ˆ•๎ˆš
Marquage au crayon Kalem ๎ƒธ๎ƒบareti
๎‰†๎‰š๎‰ช๎‰ค๎‰š๎€ƒ๎‰„๎‰š๎‰ช๎‰š๎‰ง๎‰ž๎‰š๎‰ฒ๎‰š Ceruzajelรถlรฉs
Drill Hole
Perforar Borehul
Bohrloch Borra hรฅl
Fazer furo Porausreikรค
Praticare un foro Otwรณr wiercony
Gat boren ๎‡ป๎ˆš๎ˆ๎„ฒ๎ˆก๎ˆ˜๎„ฑ๎ˆ˜๎€ƒ๎ˆ ๎ŠŒ๎ˆ’๎ˆข
Percez un trou Matkap Deli๎ƒทi
๎‰ˆ๎‰ฌ๎‰œ๎‰Ÿ๎‰ช๎‰ซ๎‰ฌ๎‰ข๎‰Ÿ๎€ƒ๎‰Œ๎‰ช๎‰Ÿ๎‰ง๎‰ข๎‰ช๎‰จ๎‰œ๎‰ค๎‰ข Lyukfรบrรกs
Adjust
Ajustar Juster
Einstellen Justera
Ajustar Sรครคtรครค
Regolare Wyregulowa๎ƒผ
Afstellen ๎ˆ†๎ˆก๎ˆ ๎„ฑ๎„ฎ๎ˆก๎ˆ๎ˆ ๎ˆ–๎ˆ’
Ajuster Ayar
๎‰‰๎‰ช๎‰ข๎‰ซ๎‰ฉ๎‰จ๎‰ซ๎‰จ๎‰›๎‰ถ๎‰ฌ๎‰Ÿ๎‰ซ๎‰ถ Beรกllรญtรกs
Hex-Head Wrench
Llave de cabeza hexagonal Sekskantet skruenรธgle
Sechskantschlรผssel Insexnyckel
Chave de cabeรงa sextavada Kuusiokoloavain
Chiave esagonale Klucz z ๎ƒกbem sze๎„žciok๎„…tnym
Zeskantsleutel ๎ˆ€๎ˆœ๎„ฐ๎ˆš๎„ฏ๎ˆ“๎€ƒ๎„ฐ๎ˆŸ๎„ฎ๎ˆ–๎ˆฆ๎ˆž๎ˆš๎ˆ›๎ˆ’๎ˆข๎€ƒ๎ˆ›๎„ฐ๎„ณ๎„ฎ๎ˆœ๎ˆ’๎ˆข
Clรฉ ร  tรชte hexagonale Alt๎ƒ•gen Kafal๎ƒ• (Allen) Anahtar
๎ˆฝ๎‰ฅ๎‰š๎‰œ๎‰ง๎‰ต๎‰ฃ๎€ƒ๎‰œ๎‰Ÿ๎‰ž๎‰ถ๎‰ฆ๎‰จ๎‰ฃ๎€ƒ๎‰Š๎‰ต๎‰œ๎‰จ๎‰ค Hatszรถgfej๎„ฆ kulcs
Socket Wrench
Llave de cubo Hylseskruenรธgle
Steckschlรผssel Hylsnyckel
Chave de caixa Hylsyavain
Chiave a brugola Klucz nasadowy
Dopsleutel ๎ˆˆ๎ˆฆ๎ˆœ๎ˆ˜๎ˆž๎ˆฆ๎„ฒ๎ˆฉ๎€ƒ๎ˆ€๎ˆœ๎„ฐ๎ˆš๎„ฏ๎ˆ“
Clรฉ ร  douilles Lokma Anahtar
๎‰Œ๎‰จ๎‰ช๎‰ฐ๎‰จ๎‰œ๎‰ต๎‰ฃ๎€ƒ๎‰ค๎‰ฅ๎‰ธ๎‰ฑ Cs๎„˜kulcs
Installation Instructions iC-PFM3 Series
11
TOOLS REQUIRED FOR INSTALLATION
PARTS
7/32" (5.5mm) #2
1/2" (12.7mm)
5/16" (7.9mm)
E(6)
M8 x 40
J(6)
M6 x35
M(6)
M5 x25
R(6)
M4 x25
1/2"(12.7mm)
A(1)
[wall plate]
B(2)
[vertical bracket]
C(6)
M8 x 20
D(6)
M8 x 30
F(6)
M8 x 50
G(6)
M6 x16
H(6)
M6 x25
K(6)
M5 x16
L(6)
M5 x20
N(6)
M5 x35
P(8)
M4 x16
Q(6)
M4 x20
S(6)
M4 x35
T(8)
1/4"(6.4mm)
U(8)
V(8)
[universal washer]
W(4 or 6)
5/16 x 2 1/2"
X(4 or 6)
1/4" (6.4mm)
Y(4 or 6)
[concrete anchor]
For below kit, quantities
are 4 of iCMPTM3, ICLPTM3
6 for iCXPTM3.
iC-PFM3 Series Installation Instructions
12
INSTALL WALL PLATE TO WALL - WOOD
STUDS
WARNING: Failure to provide adequate structural
strength for this component can result in serious personal
injury or damage to equipment! It is the installerโ€™s
responsibility to make sure the structure to which this
component is attached can support five times the
combined weight of all equipment. Reinforce the
structure as required before installing the component.
The wall to which the mount is being attached may have
a maximum drywall thickness of 5/8" (1.6cm).
1. Unfold wall plate (A) to prepare it for mounting to wall.
2. Level wall plate (A) and mark locations of pilot holes.
NOTE: For the iCXPFM3, any combination of holes can be
used for mounting to 24" studs as long as they are
24" apart. If mounting to 16" studs, only the inner
four holes may be used.
3. Drill 7/32" (5.5mm) diameter pilot holes into wood studs.
4. Using 1/2" (12.7mm) wrench, install screws (W) through
flat washers (X), wall plate (A) and into wood studs.
1
(iCLPFM shown)
1/2" (12.7mm)
3
x 4
(A)
2
(W) x 4
4
1
(X) x 4
x 4
Installation Instructions iC-PFM3 Series
13
INSTALL WALL PLATE TO WALL -
CONCRETE, CONCRETE BLOCK OR
BRICK
WARNING: Failure to provide adequate structural
strength for this component can result in serious personal
injury or damage to equipment! It is the installerโ€™s
responsibility to make sure the structure to which this
component is attached can support five times the
combined weight of all equipment. Reinforce the
structure as required before installing the component.
The wall to which the mount is being attached may have
a maximum drywall thickness of 5/8" (1.6cm).
WARNING: ELECTRICAL SHOCK HAZARD!
CUTTING OR DRILLING INTO ELECTRICAL CORDS
OR CABLES CAN CAUSE DEATH OR SERIOUS
PERSONAL INJURY! ALWAYS make certain area behind
mounting surface is free of electrical wires and cables
before drilling or installing fasteners.
WARNING: EXPLOSION AND FIRE HAZARD!
CUTTING OR DRILLING INTO GAS PLUMBING CAN
CAUSE DEATH OR SERIOUS PERSONAL INJURY!
ALWAYS make certain area behind mounting surface is
free of gas, water, waste, or any other plumbing before
cutting, drilling, or installing fasteners.
1. Unfold wall plate (A) to prepare it for mounting to wall.
2. Level wall plate (A) and mark locations of pilot holes at
desired mounting location.
NOTE: For the iCXPFM3, use the inner four holes on wall
plate for installation.
3. Drill 5/16" (8mm) diameter pilot holes into wall at
marked locations. Holes must be drilled at least 3 1/4
inches deep.
4. Install four concrete anchors (Y) into drilled holes. Use
a hammer to tap anchors into holes.
IMPORTANT ! : The anchors must be installed
through any wall covering until flush with the concrete
wall.
5. Using 1/2" (12.7mm) wrench, install screws (W) through
flat washers (X), wall plate (A) and into concrete
anchors (Y).
1A
3
X4
(A)
2
1
(iCLPFM shown)
x4
(Y)
Anchor
flush with
concrete
wall
Pilot Hole -
5/16 x 3 1/4"
(M8 x 82.5mm)
concrete or
brick wall
wall
covering
(A)
(W)
(X)
5
4
(W) X 4
1/2" (12.7mm)
(X) x 4
(Y) x 4
(A)
iC-PFM3 Series Installation Instructions
14
INSTALL BRACKETS TO DISPLAY
WARNING: The minimum hole pattern size is
100mm x 100mm for the iCMPFM3 and 200mm x
200mm for the iCLPFM3 and the iCXPFM3.
1. Lay display face down on protective surface.
CAUTION: Using screws of improper diameter
may damage your display! Proper screws will easily
thread into display mounting holes.
2. Select screw diameter by examining hardware
(C-S) (8mm, 6mm, 5mm, or 4mm) and comparing
with mounting holes on display.
3. Select spacers:
โ€ข If mounting holes are not recessed and both
brackets (B) can lay flat against display, then
no spacers are required.
โ€ข If mounting holes are recessed, or if
protrusions prevent brackets (B) from laying
flat, then spacers (T or U) must be used.
Select shortest spacer which will provide
adequate fill. All spacers must be same
length.
CAUTION: Using screws of improper length may
damage your display! Proper screws will have
adequate thread engagement without contacting
bottom of display mounting holes.
4. Select screw length:
โ€ข Using your hand, insert SHORTEST length
screw of selected diameter (C, G, K or P)
through bracket (B), universal washer (V),
selected spacer (T or U, if required), into
display mounting hole. Do NOT thread screw
into hole at this time.
โ€ข Proper screw length requires base of screw
head to protrude above flat washer a distance
equal to or greater than the screw diameter.
If screw length is inadequate, select longer
screw. Select shortest screw which will
protrude the required distance.
5. Place brackets (B) on display, ensuring:
โ€ข Upper hooks are towards top of display.
โ€ข Center of brackets (B) are as close to the
center of the back of display as possible after
being installed. Center of bracket is indicated
by the diamond-shaped hole.
6. Using Phillips screwdriver, carefully install
selected screws through universal washers (V),
brackets (B), and spacers (T or U, if required), into
display.
7. Tighten all screws. Ensure all applicable display
mounting holes (4, 6, or 8) are used.
2
(V) x 4, x 6, x 8
2 4
6
(C-S) x4,x6,x8
(V) x4,x6,x8
5
6
(C-S) x 4,x 6,x 8
2 4
3
(T or U)
5
(non-recessed holes)
(recessed holes)
(B) x 2
(B) x 2
Installation Instructions iC-PFM3 Series
15
3
INSTALL DISPLAY TO WALL PLATE
WARNING: Exceeding the weight capacity can
result in serious personal injury or damage to
equipment! It is the installerโ€™s responsibility to make
sure the combined weight of all components
attached does not exceed 125 lbs (56.7 kg) for the
iCMPFM3 and iCLPFM3 or 175 lbs (79.4 kg) for the
iCXPFM3. Use with products heavier than the
maximum weight indicated may result in collapse of
the mount and its accessories causing possible
injury.
WARNING: Display may be very heavy! Ensure
display can be safely lifted and maneuvered as
required to install on wall plate. Failure to take
adequate precautions can result in serious personal
injury or damage to equipment!
WARNING: Interface brackets must be hung on
opposite sides of the center tab on wall plate!
1. Make sure interface brackets are in the kickstand
position by pulling down on handles as far as
possible.
2. Hang display with brackets (B) on upper rail of wall
plate (A). Kickstand should be engaged with lower
portion of wall plate.
NOTE: Any cable management or rear display
adjustments should be made when the display
is resting on the kickstand.
3. Unlock kickstand by pushing up on interface
brackets until kickstand rests against the wall.
4. Push up on the interface brackets further in order to
lock display into position against wall.
NOTE: Straps can be either cut off or tucked behind
display after installation is complete so that
they will not be visable to the viewer.
5. (Optional) The straps can be moved to the lower
screw holes on interface brackets in order to
improve access to the straps on larger displays.
6. (Optional) Route padlock or cable lock (not
included) through bottom holes on interface
bracket to provide additional security.
(views from left side)
kickstand
1
2
kickstand
against wall
locked
engaged
4
position
3
center tab
interface
brackets
must be
hung on
opposite sides
of center tab
5
6
๎‰‹๎‰Ÿ๎‰ช๎‰ข๎‰น iC-PFM3 ๎‰‚๎‰ง๎‰ซ๎‰ฌ๎‰ช๎‰ญ๎‰ค๎‰ฐ๎‰ข๎‰ข๎€ƒ๎‰ฉ๎‰จ๎€ƒ๎‰ญ๎‰ซ๎‰ฌ๎‰š๎‰ง๎‰จ๎‰œ๎‰ค๎‰Ÿ
40
๎‰„๎‰Š๎ˆฟ๎‰‰๎‰…๎ˆฟ๎‰‡๎‰‚๎ˆฟ๎€ƒ๎‰‹๎‰Œ๎ˆฟ๎‰‡๎‰ˆ๎ˆผ๎‰ˆ๎‰ƒ๎€ƒ๎‰‰๎‰…๎ˆบ๎‰‹๎‰Œ๎‰‚๎‰‡๎‰•
๎‰„๎€ƒ๎‰‹๎‰Œ๎ˆฟ๎‰‡๎ˆฟ โ€“ ๎ˆพ๎ˆฟ๎‰Š๎ˆฟ๎ˆผ๎‰™๎‰‡๎‰‡๎ˆบ๎‰™๎€ƒ๎‰„๎ˆบ๎‰Š๎‰„๎ˆบ๎‰‹๎‰‡๎ˆบ๎‰™
๎‰‹๎‰Œ๎ˆฟ๎‰‡๎ˆบ
๎‰‰๎‰Š๎ˆฟ๎ˆพ๎‰๎‰‰๎‰Š๎ˆฟ๎‰€๎ˆพ๎ˆฟ๎‰‡๎‰‚๎ˆฟ. ๎‰‡๎‰Ÿ๎‰ž๎‰จ๎‰ซ๎‰ฌ๎‰š๎‰ฌ๎‰จ๎‰ฑ๎‰ง๎‰š๎‰น๎€ƒ๎‰ฉ๎‰ช๎‰จ๎‰ฑ๎‰ง๎‰จ๎‰ซ๎‰ฌ๎‰ถ
๎‰ฆ๎‰š๎‰ฌ๎‰Ÿ๎‰ช๎‰ข๎‰š๎‰ฅ๎‰š๎€ƒ๎‰ซ๎‰ฌ๎‰Ÿ๎‰ง๎‰ต๎€ƒ๎‰œ๎€ƒ๎‰ฆ๎‰Ÿ๎‰ซ๎‰ฌ๎‰Ÿ๎€ƒ๎‰ค๎‰ช๎‰Ÿ๎‰ฉ๎‰ฅ๎‰Ÿ๎‰ง๎‰ข๎‰น๎€ƒ๎‰ž๎‰š๎‰ง๎‰ง๎‰จ๎‰ฃ๎€ƒ๎‰ž๎‰Ÿ๎‰ฌ๎‰š๎‰ฅ๎‰ข
๎‰ฆ๎‰จ๎‰ ๎‰Ÿ๎‰ฌ๎€ƒ๎‰ฉ๎‰ช๎‰ข๎‰œ๎‰Ÿ๎‰ซ๎‰ฌ๎‰ข๎€ƒ๎‰ค๎€ƒ๎‰ซ๎‰Ÿ๎‰ช๎‰ถ๎‰Ÿ๎‰ก๎‰ง๎‰ต๎‰ฆ๎€ƒ๎‰ฌ๎‰ช๎‰š๎‰œ๎‰ฆ๎‰š๎‰ฆ๎€ƒ๎‰ข๎€ƒ๎‰ฉ๎‰จ๎‰œ๎‰ช๎‰Ÿ๎‰ ๎‰ž๎‰Ÿ๎‰ง๎‰ข๎‰ธ
๎‰จ๎‰›๎‰จ๎‰ช๎‰ญ๎‰ž๎‰จ๎‰œ๎‰š๎‰ง๎‰ข๎‰น! ๎‰…๎‰ข๎‰ฐ๎‰จ, ๎‰œ๎‰ต๎‰ฉ๎‰จ๎‰ฅ๎‰ง๎‰น๎‰ธ๎‰ณ๎‰Ÿ๎‰Ÿ๎€ƒ๎‰ญ๎‰ซ๎‰ฌ๎‰š๎‰ง๎‰จ๎‰œ๎‰ค๎‰ญ,
๎‰จ๎‰›๎‰น๎‰ก๎‰š๎‰ง๎‰จ๎€ƒ๎‰ญ๎‰›๎‰Ÿ๎‰ž๎‰ข๎‰ฌ๎‰ถ๎‰ซ๎‰น๎€ƒ๎‰œ๎€ƒ๎‰ฌ๎‰จ๎‰ฆ, ๎‰ฑ๎‰ฌ๎‰จ๎€ƒ๎‰ฉ๎‰ช๎‰จ๎‰ฑ๎‰ง๎‰จ๎‰ซ๎‰ฌ๎‰ถ๎€ƒ๎‰ฆ๎‰š๎‰ฌ๎‰Ÿ๎‰ช๎‰ข๎‰š๎‰ฅ๎‰š
๎‰ซ๎‰ฌ๎‰Ÿ๎‰ง๎‰ต๎€ƒ๎‰œ๎€ƒ๎‰ฆ๎‰Ÿ๎‰ซ๎‰ฌ๎‰Ÿ๎€ƒ๎‰ค๎‰ช๎‰Ÿ๎‰ฉ๎‰ฅ๎‰Ÿ๎‰ง๎‰ข๎‰น๎€ƒ๎‰ž๎‰š๎‰ง๎‰ง๎‰จ๎‰ฃ๎€ƒ๎‰ž๎‰Ÿ๎‰ฌ๎‰š๎‰ฅ๎‰ข๎€ƒ๎‰ฉ๎‰จ๎‰ก๎‰œ๎‰จ๎‰ฅ๎‰น๎‰Ÿ๎‰ฌ
๎‰œ๎‰ต๎‰ž๎‰Ÿ๎‰ช๎‰ ๎‰š๎‰ฌ๎‰ถ๎€ƒ๎‰ง๎‰š๎‰๎‰ช๎‰ญ๎‰ก๎‰ค๎‰ญ, ๎‰ฉ๎‰ช๎‰Ÿ๎‰œ๎‰จ๎‰ซ๎‰ฏ๎‰จ๎‰ž๎‰น๎‰ณ๎‰ญ๎‰ธ๎€ƒ๎‰œ๎€ƒ๎‰ฉ๎‰น๎‰ฌ๎‰ถ๎€ƒ๎‰ช๎‰š๎‰ก๎€ƒ๎‰œ๎‰Ÿ๎‰ซ
๎‰œ๎‰ซ๎‰Ÿ๎‰๎‰จ๎€ƒ๎‰ข๎‰ฆ๎‰Ÿ๎‰ธ๎‰ณ๎‰Ÿ๎‰๎‰จ๎‰ซ๎‰น๎€ƒ๎‰จ๎‰›๎‰จ๎‰ช๎‰ญ๎‰ž๎‰จ๎‰œ๎‰š๎‰ง๎‰ข๎‰น. ๎‰‰๎‰ช๎‰ข๎€ƒ๎‰ง๎‰Ÿ๎‰จ๎‰›๎‰ฏ๎‰จ๎‰ž๎‰ข๎‰ฆ๎‰จ๎‰ซ๎‰ฌ๎‰ข
๎‰ฉ๎‰Ÿ๎‰ช๎‰Ÿ๎‰ž๎€ƒ๎‰ญ๎‰ซ๎‰ฌ๎‰š๎‰ง๎‰จ๎‰œ๎‰ค๎‰จ๎‰ฃ๎€ƒ๎‰ž๎‰š๎‰ง๎‰ง๎‰จ๎‰ฃ๎€ƒ๎‰ž๎‰Ÿ๎‰ฌ๎‰š๎‰ฅ๎‰ข๎€ƒ๎‰ซ๎‰ฅ๎‰Ÿ๎‰ž๎‰ญ๎‰Ÿ๎‰ฌ๎€ƒ๎‰ฉ๎‰ช๎‰ข๎‰ง๎‰น๎‰ฌ๎‰ถ
๎‰ฆ๎‰Ÿ๎‰ช๎‰ต๎€ƒ๎‰ž๎‰ฅ๎‰น๎€ƒ๎‰ฉ๎‰จ๎‰œ๎‰ต๎‰ฒ๎‰Ÿ๎‰ง๎‰ข๎‰น๎€ƒ๎‰ฉ๎‰ช๎‰จ๎‰ฑ๎‰ง๎‰จ๎‰ซ๎‰ฌ๎‰ข๎€ƒ๎‰ฆ๎‰š๎‰ฌ๎‰Ÿ๎‰ช๎‰ข๎‰š๎‰ฅ๎‰š๎€ƒ๎‰ซ๎‰ฌ๎‰Ÿ๎‰ง๎‰ต.
๎‰Œ๎‰จ๎‰ฅ๎‰ณ๎‰ข๎‰ง๎‰š๎€ƒ๎‰ฒ๎‰ฌ๎‰ญ๎‰ค๎‰š๎‰ฌ๎‰ญ๎‰ช๎‰ค๎‰ข๎€ƒ๎‰ง๎‰š๎€ƒ๎‰ซ๎‰ฌ๎‰Ÿ๎‰ง๎‰Ÿ, ๎‰ค๎€ƒ๎‰ค๎‰จ๎‰ฌ๎‰จ๎‰ช๎‰จ๎‰ฃ๎€ƒ๎‰ค๎‰ช๎‰Ÿ๎‰ฉ๎‰น๎‰ฌ๎‰ซ๎‰น
๎‰ค๎‰ช๎‰จ๎‰ง๎‰ฒ๎‰ฌ๎‰Ÿ๎‰ฃ๎‰ง๎‰ต, ๎‰ž๎‰จ๎‰ฅ๎‰ ๎‰ง๎‰š๎€ƒ๎‰ซ๎‰จ๎‰ซ๎‰ฌ๎‰š๎‰œ๎‰ฅ๎‰น๎‰ฌ๎‰ถ๎€ƒ๎‰ง๎‰Ÿ๎€ƒ๎‰›๎‰จ๎‰ฅ๎‰Ÿ๎‰Ÿ 1,6 ๎‰ซ๎‰ฆ.
1. ๎‰Š๎‰š๎‰ก๎‰œ๎‰Ÿ๎‰ช๎‰ง๎‰ข๎‰ฌ๎‰Ÿ๎€ƒ๎‰ซ๎‰ฌ๎‰Ÿ๎‰ง๎‰จ๎‰œ๎‰ญ๎‰ธ๎€ƒ๎‰ฉ๎‰ฅ๎‰š๎‰ซ๎‰ฌ๎‰ข๎‰ง๎‰ญ (A) ๎‰ž๎‰ฅ๎‰น๎€ƒ๎‰ฉ๎‰จ๎‰ž๎‰๎‰จ๎‰ฌ๎‰จ๎‰œ๎‰ค๎‰ข
๎‰ค๎€ƒ๎‰ฆ๎‰จ๎‰ง๎‰ฌ๎‰š๎‰ ๎‰ญ๎€ƒ๎‰ง๎‰š๎€ƒ๎‰ซ๎‰ฌ๎‰Ÿ๎‰ง๎‰ญ.
2. ๎ˆผ๎‰ต๎‰ช๎‰จ๎‰œ๎‰ง๎‰น๎‰ฃ๎‰ฌ๎‰Ÿ๎€ƒ๎‰ฉ๎‰ฅ๎‰š๎‰ซ๎‰ฌ๎‰ข๎‰ง๎‰ญ (A) ๎‰ข๎€ƒ๎‰จ๎‰ฌ๎‰ฆ๎‰Ÿ๎‰ฌ๎‰ถ๎‰ฌ๎‰Ÿ
๎‰ฆ๎‰Ÿ๎‰ซ๎‰ฌ๎‰จ๎‰ฉ๎‰จ๎‰ฅ๎‰จ๎‰ ๎‰Ÿ๎‰ง๎‰ข๎‰Ÿ๎€ƒ๎‰ง๎‰š๎‰ฉ๎‰ช๎‰š๎‰œ๎‰ฅ๎‰น๎‰ธ๎‰ณ๎‰ข๎‰ฏ๎€ƒ๎‰จ๎‰ฌ๎‰œ๎‰Ÿ๎‰ช๎‰ซ๎‰ฌ๎‰ข๎‰ฃ.
๎‰‰๎‰Š๎‰‚๎‰†๎ˆฟ๎‰‘๎ˆบ๎‰‡๎‰‚๎ˆฟ. ๎‰†๎‰จ๎‰ž๎‰Ÿ๎‰ฅ๎‰ถ iCMPFM3 ๎‰ž๎‰จ๎‰ฅ๎‰ ๎‰ง๎‰š
๎‰ญ๎‰ซ๎‰ฌ๎‰š๎‰ง๎‰š๎‰œ๎‰ฅ๎‰ข๎‰œ๎‰š๎‰ฌ๎‰ถ๎‰ซ๎‰น๎€ƒ๎‰ง๎‰š๎€ƒ๎‰ซ๎‰ฌ๎‰จ๎‰ฃ๎‰ค๎‰ข๎€ƒ๎‰ž๎‰ฅ๎‰ข๎‰ง๎‰จ๎‰ฃ
40,6 ๎‰ซ๎‰ฆ. ๎‰†๎‰จ๎‰ž๎‰Ÿ๎‰ฅ๎‰ถ iCLPFM3 ๎‰ฆ๎‰จ๎‰ ๎‰Ÿ๎‰ฌ
๎‰ญ๎‰ซ๎‰ฌ๎‰š๎‰ง๎‰š๎‰œ๎‰ฅ๎‰ข๎‰œ๎‰š๎‰ฌ๎‰ถ๎‰ซ๎‰น๎€ƒ๎‰ง๎‰š๎€ƒ๎‰ซ๎‰ฌ๎‰จ๎‰ฃ๎‰ค๎‰ข๎€ƒ๎‰ž๎‰ฅ๎‰ข๎‰ง๎‰จ๎‰ฃ
40,6 ๎‰ซ๎‰ฆ (๎‰œ๎‰ง๎‰ญ๎‰ฌ๎‰ช๎‰Ÿ๎‰ง๎‰ง๎‰ข๎‰Ÿ๎€ƒ๎‰จ๎‰ฌ๎‰œ๎‰Ÿ๎‰ช๎‰ซ๎‰ฌ๎‰ข๎‰น) ๎‰ข๎‰ฅ๎‰ข
61,0 ๎‰ซ๎‰ฆ (๎‰ง๎‰š๎‰ช๎‰ญ๎‰ ๎‰ง๎‰ต๎‰Ÿ๎€ƒ๎‰จ๎‰ฌ๎‰œ๎‰Ÿ๎‰ช๎‰ซ๎‰ฌ๎‰ข๎‰น).
๎‰†๎‰จ๎‰ž๎‰Ÿ๎‰ฅ๎‰ถ iCXPFM3 ๎‰ฆ๎‰จ๎‰ ๎‰Ÿ๎‰ฌ
๎‰ญ๎‰ซ๎‰ฌ๎‰š๎‰ง๎‰š๎‰œ๎‰ฅ๎‰ข๎‰œ๎‰š๎‰ฌ๎‰ถ๎‰ซ๎‰น๎€ƒ๎‰ง๎‰š๎€ƒ๎‰ž๎‰œ๎‰Ÿ๎€ƒ๎‰ข๎‰ฅ๎‰ข๎€ƒ๎‰ฌ๎‰ช๎‰ข
๎‰ซ๎‰ฌ๎‰จ๎‰ฃ๎‰ค๎‰ข๎€ƒ๎‰ž๎‰ฅ๎‰ข๎‰ง๎‰จ๎‰ฃ 40,6 ๎‰ซ๎‰ฆ๎€ƒ๎‰ข๎‰ฅ๎‰ข๎€ƒ๎‰ž๎‰œ๎‰Ÿ๎€ƒ๎‰ซ๎‰ฌ๎‰จ๎‰ฃ๎‰ค๎‰ข
๎‰ž๎‰ฅ๎‰ข๎‰ง๎‰จ๎‰ฃ 61,0 ๎‰ซ๎‰ฆ. ๎‰‰๎‰ช๎‰ข๎€ƒ๎‰ญ๎‰ซ๎‰ฌ๎‰š๎‰ง๎‰จ๎‰œ๎‰ค๎‰Ÿ๎€ƒ๎‰ง๎‰š๎€ƒ๎‰ฌ๎‰ช๎‰ข
๎‰ซ๎‰ฌ๎‰จ๎‰ฃ๎‰ค๎‰ข๎€ƒ๎‰ž๎‰ฅ๎‰ข๎‰ง๎‰จ๎‰ฃ 40,6 ๎‰ซ๎‰ฆ๎€ƒ๎‰œ๎‰ซ๎‰Ÿ๎€ƒ๎‰ฌ๎‰ช๎‰ข๎€ƒ๎‰ซ๎‰ฌ๎‰จ๎‰ฃ๎‰ค๎‰ข
๎‰ž๎‰จ๎‰ฅ๎‰ ๎‰ง๎‰ต๎€ƒ๎‰ค๎‰ช๎‰Ÿ๎‰ฉ๎‰ข๎‰ฌ๎‰ถ๎‰ซ๎‰น๎€ƒ๎‰œ๎€ƒ๎‰ง๎‰š๎‰ช๎‰ญ๎‰ ๎‰ง๎‰ต๎‰ฏ๎€ƒ๎‰ข
๎‰ฐ๎‰Ÿ๎‰ง๎‰ฌ๎‰ช๎‰š๎‰ฅ๎‰ถ๎‰ง๎‰ต๎‰ฏ๎€ƒ๎‰จ๎‰ฌ๎‰œ๎‰Ÿ๎‰ช๎‰ซ๎‰ฌ๎‰ข๎‰น๎‰ฏ.
๎‰‰๎‰Š๎‰‚๎‰†๎ˆฟ๎‰‘๎ˆบ๎‰‡๎‰‚๎ˆฟ. ๎‰‹๎‰Ÿ๎‰ช๎‰Ÿ๎‰ž๎‰ข๎‰ง๎‰š๎€ƒ๎‰ท๎‰ค๎‰ช๎‰š๎‰ง๎‰š๎€ƒ๎‰ฉ๎‰จ๎€ƒ๎‰œ๎‰Ÿ๎‰ช๎‰ฌ๎‰ข๎‰ค๎‰š๎‰ฅ๎‰ข๎€ƒ๎‰›๎‰ญ๎‰ž๎‰Ÿ๎‰ฌ
๎‰ซ๎‰จ๎‰œ๎‰ฉ๎‰š๎‰ž๎‰š๎‰ฌ๎‰ถ๎€ƒ๎‰ซ๎€ƒ๎‰ฐ๎‰Ÿ๎‰ง๎‰ฌ๎‰ช๎‰š๎‰ฅ๎‰ถ๎‰ง๎‰จ๎‰ฃ๎€ƒ๎‰ฅ๎‰ข๎‰ง๎‰ข๎‰Ÿ๎‰ฃ,
๎‰จ๎‰›๎‰จ๎‰ก๎‰ง๎‰š๎‰ฑ๎‰Ÿ๎‰ง๎‰ง๎‰จ๎‰ฃ๎€ƒ๎‰ง๎‰š๎€ƒ๎‰ง๎‰š๎‰ค๎‰ฅ๎‰Ÿ๎‰ฃ๎‰ค๎‰š๎‰ฏ,
๎‰ช๎‰š๎‰ซ๎‰ฉ๎‰จ๎‰ฅ๎‰จ๎‰ ๎‰Ÿ๎‰ง๎‰ง๎‰ต๎‰ฏ๎€ƒ๎‰ง๎‰Ÿ๎‰ฉ๎‰จ๎‰ซ๎‰ช๎‰Ÿ๎‰ž๎‰ซ๎‰ฌ๎‰œ๎‰Ÿ๎‰ง๎‰ง๎‰จ
๎‰ฉ๎‰จ๎‰ž๎€ƒ๎‰ค๎‰š๎‰ ๎‰ž๎‰จ๎‰ฃ๎€ƒ๎‰ฉ๎‰Ÿ๎‰ฌ๎‰ฅ๎‰Ÿ๎‰ฃ. ๎‰—๎‰ฌ๎‰จ๎€ƒ๎‰ง๎‰Ÿ๎‰จ๎‰›๎‰ฏ๎‰จ๎‰ž๎‰ข๎‰ฆ๎‰จ
๎‰ญ๎‰ฑ๎‰ข๎‰ฌ๎‰ต๎‰œ๎‰š๎‰ฌ๎‰ถ๎€ƒ๎‰ฉ๎‰ช๎‰ข๎€ƒ๎‰œ๎‰ต๎‰›๎‰จ๎‰ช๎‰Ÿ๎€ƒ๎‰ฆ๎‰Ÿ๎‰ซ๎‰ฌ๎‰š
๎‰ค๎‰ช๎‰Ÿ๎‰ฉ๎‰ฅ๎‰Ÿ๎‰ง๎‰ข๎‰น.
3. ๎‰‰๎‰ช๎‰จ๎‰ซ๎‰œ๎‰Ÿ๎‰ช๎‰ฅ๎‰ข๎‰ฌ๎‰Ÿ๎€ƒ๎‰œ๎€ƒ๎‰ž๎‰Ÿ๎‰ช๎‰Ÿ๎‰œ๎‰น๎‰ง๎‰ง๎‰จ๎‰ฆ๎€ƒ๎‰›๎‰ช๎‰ญ๎‰ซ๎‰Ÿ๎€ƒ๎‰ง๎‰š๎‰ฉ๎‰ช๎‰š๎‰œ๎‰ฅ๎‰น๎‰ธ๎‰ณ๎‰ข๎‰Ÿ
๎‰จ๎‰ฌ๎‰œ๎‰Ÿ๎‰ช๎‰ซ๎‰ฌ๎‰ข๎‰น๎€ƒ๎‰ž๎‰ข๎‰š๎‰ฆ๎‰Ÿ๎‰ฌ๎‰ช๎‰จ๎‰ฆ 5,5 ๎‰ฆ๎‰ฆ.
4. ๎‰‹๎€ƒ๎‰ฉ๎‰จ๎‰ฆ๎‰จ๎‰ณ๎‰ถ๎‰ธ๎€ƒ๎‰ค๎‰ฅ๎‰ธ๎‰ฑ๎‰š 1/2 ๎‰ž๎‰ธ๎‰ฃ๎‰ฆ๎‰š (12,7 ๎‰ฆ๎‰ฆ) ๎‰œ๎‰ค๎‰ช๎‰ญ๎‰ฌ๎‰ข๎‰ฌ๎‰Ÿ
๎‰œ๎‰ข๎‰ง๎‰ฌ๎‰ต (C) ๎‰ฑ๎‰Ÿ๎‰ช๎‰Ÿ๎‰ก๎€ƒ๎‰ฉ๎‰ฅ๎‰จ๎‰ซ๎‰ค๎‰ข๎‰Ÿ๎€ƒ๎‰ฒ๎‰š๎‰ฃ๎‰›๎‰ต (D) ๎‰ข๎€ƒ๎‰ซ๎‰ฌ๎‰Ÿ๎‰ง๎‰จ๎‰œ๎‰ญ๎‰ธ
๎‰ฉ๎‰ฅ๎‰š๎‰ซ๎‰ฌ๎‰ข๎‰ง๎‰ญ (A) ๎‰œ๎€ƒ๎‰ž๎‰Ÿ๎‰ช๎‰Ÿ๎‰œ๎‰น๎‰ง๎‰ง๎‰ต๎‰Ÿ๎€ƒ๎‰›๎‰ช๎‰ญ๎‰ซ๎‰ค๎‰ข.
1
1/2 ๎‰ž๎‰ธ๎‰ฃ๎‰ฆ๎‰š (12,7 ๎‰ฆ๎‰ฆ)
(A)
2
4
1
CENTER
LINE
3
(C) x 4 ๎‰ข๎‰ฅ๎‰ข 6
(D) x 4 ๎‰ข๎‰ฅ๎‰ข 6
x 4 ๎‰ข๎‰ฅ๎‰ข 6
2 x 24"
2 x 16"
(iCXPFM3)
3 x 16"
๎€‹๎‰ฉ๎‰จ๎‰ค๎‰š๎‰ก๎‰š๎‰ง๎‰š๎€ƒ๎‰ฆ๎‰จ๎‰ž๎‰Ÿ๎‰ฅ๎‰ถ iCMPFM)
x 4 ๎‰ข๎‰ฅ๎‰ข 6
๎‰‚๎‰ง๎‰ซ๎‰ฌ๎‰ช๎‰ญ๎‰ค๎‰ฐ๎‰ข๎‰ข๎€ƒ๎‰ฉ๎‰จ๎€ƒ๎‰ญ๎‰ซ๎‰ฌ๎‰š๎‰ง๎‰จ๎‰œ๎‰ค๎‰Ÿ ๎‰‹๎‰Ÿ๎‰ช๎‰ข๎‰น iC-PFM3
41
๎‰„๎‰Š๎ˆฟ๎‰‰๎‰…๎ˆฟ๎‰‡๎‰‚๎ˆฟ๎€ƒ๎‰‹๎‰Œ๎ˆฟ๎‰‡๎‰ˆ๎ˆผ๎‰ˆ๎‰ƒ๎€ƒ๎‰‰๎‰…๎ˆบ๎‰‹๎‰Œ๎‰‚๎‰‡๎‰•๎€ƒ๎‰„๎€ƒ๎‰‹๎‰Œ๎ˆฟ๎‰‡๎ˆฟ -
๎ˆป๎ˆฟ๎‰Œ๎‰ˆ๎‰‡, ๎ˆป๎ˆฟ๎‰Œ๎‰ˆ๎‰‡๎‰‡๎‰•๎ˆฟ๎€ƒ๎ˆป๎‰…๎‰ˆ๎‰„๎‰‚๎€ƒ๎‰‚๎‰…๎‰‚๎€ƒ๎‰„๎‰‚๎‰Š๎‰‰๎‰‚๎‰‘
๎‰‰๎‰Š๎ˆฟ๎ˆพ๎‰๎‰‰๎‰Š๎ˆฟ๎‰€๎ˆพ๎ˆฟ๎‰‡๎‰‚๎ˆฟ. ๎‰‡๎‰Ÿ๎‰ž๎‰จ๎‰ซ๎‰ฌ๎‰š๎‰ฌ๎‰จ๎‰ฑ๎‰ง๎‰š๎‰น๎€ƒ๎‰ฉ๎‰ช๎‰จ๎‰ฑ๎‰ง๎‰จ๎‰ซ๎‰ฌ๎‰ถ
๎‰ฆ๎‰š๎‰ฌ๎‰Ÿ๎‰ช๎‰ข๎‰š๎‰ฅ๎‰š๎€ƒ๎‰ซ๎‰ฌ๎‰Ÿ๎‰ง๎‰ต๎€ƒ๎‰œ๎€ƒ๎‰ฆ๎‰Ÿ๎‰ซ๎‰ฌ๎‰Ÿ๎€ƒ๎‰ค๎‰ช๎‰Ÿ๎‰ฉ๎‰ฅ๎‰Ÿ๎‰ง๎‰ข๎‰น๎€ƒ๎‰ž๎‰š๎‰ง๎‰ง๎‰จ๎‰ฃ๎€ƒ๎‰ž๎‰Ÿ๎‰ฌ๎‰š๎‰ฅ๎‰ข๎€ƒ๎‰ฆ๎‰จ๎‰ ๎‰Ÿ๎‰ฌ
๎‰ฉ๎‰ช๎‰ข๎‰œ๎‰Ÿ๎‰ซ๎‰ฌ๎‰ข๎€ƒ๎‰ค๎€ƒ๎‰ซ๎‰Ÿ๎‰ช๎‰ถ๎‰Ÿ๎‰ก๎‰ง๎‰ต๎‰ฆ๎€ƒ๎‰ฌ๎‰ช๎‰š๎‰œ๎‰ฆ๎‰š๎‰ฆ๎€ƒ๎‰ข๎€ƒ๎‰ฉ๎‰จ๎‰œ๎‰ช๎‰Ÿ๎‰ ๎‰ž๎‰Ÿ๎‰ง๎‰ข๎‰ธ
๎‰จ๎‰›๎‰จ๎‰ช๎‰ญ๎‰ž๎‰จ๎‰œ๎‰š๎‰ง๎‰ข๎‰น! ๎‰…๎‰ข๎‰ฐ๎‰จ, ๎‰œ๎‰ต๎‰ฉ๎‰จ๎‰ฅ๎‰ง๎‰น๎‰ธ๎‰ณ๎‰Ÿ๎‰Ÿ๎€ƒ๎‰ญ๎‰ซ๎‰ฌ๎‰š๎‰ง๎‰จ๎‰œ๎‰ค๎‰ญ, ๎‰จ๎‰›๎‰น๎‰ก๎‰š๎‰ง๎‰จ
๎‰ญ๎‰›๎‰Ÿ๎‰ž๎‰ข๎‰ฌ๎‰ถ๎‰ซ๎‰น๎€ƒ๎‰œ๎€ƒ๎‰ฌ๎‰จ๎‰ฆ, ๎‰ฑ๎‰ฌ๎‰จ๎€ƒ๎‰ฉ๎‰ช๎‰จ๎‰ฑ๎‰ง๎‰จ๎‰ซ๎‰ฌ๎‰ถ๎€ƒ๎‰ฆ๎‰š๎‰ฌ๎‰Ÿ๎‰ช๎‰ข๎‰š๎‰ฅ๎‰š๎€ƒ๎‰ซ๎‰ฌ๎‰Ÿ๎‰ง๎‰ต๎€ƒ๎‰œ๎€ƒ๎‰ฆ๎‰Ÿ๎‰ซ๎‰ฌ๎‰Ÿ
๎‰ค๎‰ช๎‰Ÿ๎‰ฉ๎‰ฅ๎‰Ÿ๎‰ง๎‰ข๎‰น๎€ƒ๎‰ž๎‰š๎‰ง๎‰ง๎‰จ๎‰ฃ๎€ƒ๎‰ž๎‰Ÿ๎‰ฌ๎‰š๎‰ฅ๎‰ข๎€ƒ๎‰ฉ๎‰จ๎‰ก๎‰œ๎‰จ๎‰ฅ๎‰น๎‰Ÿ๎‰ฌ๎€ƒ๎‰œ๎‰ต๎‰ž๎‰Ÿ๎‰ช๎‰ ๎‰š๎‰ฌ๎‰ถ๎€ƒ๎‰ง๎‰š๎‰๎‰ช๎‰ญ๎‰ก๎‰ค๎‰ญ,
๎‰ฉ๎‰ช๎‰Ÿ๎‰œ๎‰จ๎‰ซ๎‰ฏ๎‰จ๎‰ž๎‰น๎‰ณ๎‰ญ๎‰ธ๎€ƒ๎‰œ๎€ƒ๎‰ฉ๎‰น๎‰ฌ๎‰ถ๎€ƒ๎‰ช๎‰š๎‰ก๎€ƒ๎‰œ๎‰Ÿ๎‰ซ๎€ƒ๎‰œ๎‰ซ๎‰Ÿ๎‰๎‰จ๎€ƒ๎‰ข๎‰ฆ๎‰Ÿ๎‰ธ๎‰ณ๎‰Ÿ๎‰๎‰จ๎‰ซ๎‰น
๎‰จ๎‰›๎‰จ๎‰ช๎‰ญ๎‰ž๎‰จ๎‰œ๎‰š๎‰ง๎‰ข๎‰น. ๎‰‰๎‰ช๎‰ข๎€ƒ๎‰ง๎‰Ÿ๎‰จ๎‰›๎‰ฏ๎‰จ๎‰ž๎‰ข๎‰ฆ๎‰จ๎‰ซ๎‰ฌ๎‰ข๎€ƒ๎‰ฉ๎‰Ÿ๎‰ช๎‰Ÿ๎‰ž๎€ƒ๎‰ญ๎‰ซ๎‰ฌ๎‰š๎‰ง๎‰จ๎‰œ๎‰ค๎‰จ๎‰ฃ
๎‰ž๎‰š๎‰ง๎‰ง๎‰จ๎‰ฃ๎€ƒ๎‰ž๎‰Ÿ๎‰ฌ๎‰š๎‰ฅ๎‰ข๎€ƒ๎‰ซ๎‰ฅ๎‰Ÿ๎‰ž๎‰ญ๎‰Ÿ๎‰ฌ๎€ƒ๎‰ฉ๎‰ช๎‰ข๎‰ง๎‰น๎‰ฌ๎‰ถ๎€ƒ๎‰ฆ๎‰Ÿ๎‰ช๎‰ต๎€ƒ๎‰ž๎‰ฅ๎‰น๎€ƒ๎‰ฉ๎‰จ๎‰œ๎‰ต๎‰ฒ๎‰Ÿ๎‰ง๎‰ข๎‰น
๎‰ฉ๎‰ช๎‰จ๎‰ฑ๎‰ง๎‰จ๎‰ซ๎‰ฌ๎‰ข๎€ƒ๎‰ฆ๎‰š๎‰ฌ๎‰Ÿ๎‰ช๎‰ข๎‰š๎‰ฅ๎‰š๎€ƒ๎‰ซ๎‰ฌ๎‰Ÿ๎‰ง๎‰ต. ๎‰Œ๎‰จ๎‰ฅ๎‰ณ๎‰ข๎‰ง๎‰š๎€ƒ๎‰ฒ๎‰ฌ๎‰ญ๎‰ค๎‰š๎‰ฌ๎‰ญ๎‰ช๎‰ค๎‰ข๎€ƒ๎‰ง๎‰š
๎‰ซ๎‰ฌ๎‰Ÿ๎‰ง๎‰Ÿ, ๎‰ค๎€ƒ๎‰ค๎‰จ๎‰ฌ๎‰จ๎‰ช๎‰จ๎‰ฃ๎€ƒ๎‰ค๎‰ช๎‰Ÿ๎‰ฉ๎‰น๎‰ฌ๎‰ซ๎‰น๎€ƒ๎‰ค๎‰ช๎‰จ๎‰ง๎‰ฒ๎‰ฌ๎‰Ÿ๎‰ฃ๎‰ง๎‰ต, ๎‰ž๎‰จ๎‰ฅ๎‰ ๎‰ง๎‰š๎€ƒ๎‰ซ๎‰จ๎‰ซ๎‰ฌ๎‰š๎‰œ๎‰ฅ๎‰น๎‰ฌ๎‰ถ
๎‰ง๎‰Ÿ๎€ƒ๎‰›๎‰จ๎‰ฅ๎‰Ÿ๎‰Ÿ 1,6 ๎‰ซ๎‰ฆ.
๎‰‰๎‰Š๎ˆฟ๎ˆพ๎‰๎‰‰๎‰Š๎ˆฟ๎‰€๎ˆพ๎ˆฟ๎‰‡๎‰‚๎ˆฟ: ๎‰ˆ๎‰‰๎ˆบ๎‰‹๎‰‡๎‰ˆ๎‰‹๎‰Œ๎‰–๎€ƒ๎‰‰๎‰ˆ๎‰Š๎ˆบ๎‰€๎ˆฟ๎‰‡๎‰‚๎‰™
๎‰—๎‰…๎ˆฟ๎‰„๎‰Œ๎‰Š๎‰‚๎‰‘๎ˆฟ๎‰‹๎‰„๎‰‚๎‰†๎€ƒ๎‰Œ๎‰ˆ๎‰„๎‰ˆ๎‰†! ๎‰Š๎ˆบ๎‰๎‰Š๎ˆฟ๎‰๎ˆบ๎‰‡๎‰‚๎ˆฟ๎€ƒ๎‰‚๎‰…๎‰‚
๎‰‰๎‰Š๎‰ˆ๎‰‹๎ˆผ๎ˆฟ๎‰Š๎‰…๎‰‚๎ˆผ๎ˆบ๎‰‡๎‰‚๎ˆฟ๎€ƒ๎‰‰๎‰Š๎‰ˆ๎ˆผ๎‰ˆ๎ˆพ๎ˆบ๎€ƒ๎‰‚๎‰…๎‰‚๎€ƒ๎‰„๎ˆบ๎ˆป๎ˆฟ๎‰…๎‰™๎€ƒ๎‰†๎‰ˆ๎‰€๎ˆฟ๎‰Œ
๎‰‰๎‰Š๎‰‚๎ˆผ๎ˆฟ๎‰‹๎‰Œ๎‰‚๎€ƒ๎‰„๎€ƒ๎‰‹๎ˆฟ๎‰Š๎‰–๎ˆฟ๎‰๎‰‡๎‰•๎‰†๎€ƒ๎‰Œ๎‰Š๎ˆบ๎ˆผ๎‰†๎ˆบ๎‰†๎€ƒ๎‰‚๎‰…๎‰‚
๎‰‹๎‰†๎ˆฟ๎‰Š๎‰Œ๎ˆฟ๎‰…๎‰–๎‰‡๎‰ˆ๎‰†๎‰๎€ƒ๎‰‚๎‰‹๎‰๎‰ˆ๎ˆพ๎‰! ๎‰‰๎‰Ÿ๎‰ช๎‰Ÿ๎‰ž๎€ƒ๎‰ซ๎‰œ๎‰Ÿ๎‰ช๎‰ฅ๎‰Ÿ๎‰ง๎‰ข๎‰Ÿ๎‰ฆ๎€ƒ๎‰จ๎‰ฌ๎‰œ๎‰Ÿ๎‰ช๎‰ซ๎‰ฌ๎‰ข๎‰ฃ
๎‰ข๎‰ฅ๎‰ข๎€ƒ๎‰ญ๎‰ซ๎‰ฌ๎‰š๎‰ง๎‰จ๎‰œ๎‰ค๎‰จ๎‰ฃ๎€ƒ๎‰ค๎‰ช๎‰Ÿ๎‰ฉ๎‰Ÿ๎‰ ๎‰ง๎‰ต๎‰ฏ๎€ƒ๎‰ท๎‰ฅ๎‰Ÿ๎‰ฆ๎‰Ÿ๎‰ง๎‰ฌ๎‰จ๎‰œ๎€ƒ๎‰ˆ๎ˆป๎‰™๎‰๎ˆบ๎‰Œ๎ˆฟ๎‰…๎‰–๎‰‡๎‰ˆ
๎‰ญ๎‰›๎‰Ÿ๎‰ž๎‰ข๎‰ฌ๎‰Ÿ๎‰ซ๎‰ถ๎€ƒ๎‰œ๎€ƒ๎‰ฌ๎‰จ๎‰ฆ, ๎‰ฑ๎‰ฌ๎‰จ๎€ƒ๎‰œ๎€ƒ๎‰ฆ๎‰Ÿ๎‰ซ๎‰ฌ๎‰Ÿ๎€ƒ๎‰ญ๎‰ซ๎‰ฌ๎‰š๎‰ง๎‰จ๎‰œ๎‰ค๎‰ข๎€ƒ๎‰ง๎‰Ÿ๎‰ฌ๎€ƒ๎‰ท๎‰ฅ๎‰Ÿ๎‰ค๎‰ฌ๎‰ช๎‰ข๎‰ฑ๎‰Ÿ๎‰ซ๎‰ค๎‰ข๎‰ฏ
๎‰ฉ๎‰ช๎‰จ๎‰œ๎‰จ๎‰ž๎‰จ๎‰œ๎€ƒ๎‰ข๎€ƒ๎‰ค๎‰š๎‰›๎‰Ÿ๎‰ฅ๎‰Ÿ๎‰ฃ.
๎‰‰๎‰Š๎ˆฟ๎ˆพ๎‰๎‰‰๎‰Š๎ˆฟ๎‰€๎ˆพ๎ˆฟ๎‰‡๎‰‚๎ˆฟ: ๎‰ˆ๎‰‰๎ˆบ๎‰‹๎‰‡๎‰ˆ๎‰‹๎‰Œ๎‰–๎€ƒ๎ˆผ๎‰๎‰Š๎‰•๎ˆผ๎ˆบ๎€ƒ๎‰‚๎‰…๎‰‚
๎‰‰๎‰ˆ๎‰€๎ˆบ๎‰Š๎ˆบ! ๎‰Š๎ˆบ๎‰๎‰Š๎ˆฟ๎‰๎ˆบ๎‰‡๎‰‚๎ˆฟ๎€ƒ๎‰‚๎‰…๎‰‚๎€ƒ๎‰‰๎‰Š๎‰ˆ๎‰‹๎ˆผ๎ˆฟ๎‰Š๎‰…๎‰‚๎ˆผ๎ˆบ๎‰‡๎‰‚๎ˆฟ
๎ˆฝ๎ˆบ๎‰๎‰ˆ๎ˆผ๎‰ˆ๎‰ƒ๎€ƒ๎‰Œ๎‰Š๎‰๎ˆป๎‰•๎€ƒ๎‰†๎‰ˆ๎‰€๎ˆฟ๎‰Œ๎€ƒ๎‰‰๎‰Š๎‰‚๎ˆผ๎ˆฟ๎‰‹๎‰Œ๎‰‚๎€ƒ๎‰„๎€ƒ๎‰‹๎ˆฟ๎‰Š๎‰–๎ˆฟ๎‰๎‰‡๎‰•๎‰†
๎‰Œ๎‰Š๎ˆบ๎ˆผ๎‰†๎ˆบ๎‰†๎€ƒ๎‰‚๎‰…๎‰‚๎€ƒ๎‰‹๎‰†๎ˆฟ๎‰Š๎‰Œ๎ˆฟ๎‰…๎‰–๎‰‡๎‰ˆ๎‰†๎‰๎€ƒ๎‰‚๎‰‹๎‰๎‰ˆ๎ˆพ๎‰! ๎‰‰๎‰Ÿ๎‰ช๎‰Ÿ๎‰ž๎€ƒ๎‰ช๎‰Ÿ๎‰ก๎‰ค๎‰จ๎‰ฃ,
๎‰ซ๎‰œ๎‰Ÿ๎‰ช๎‰ฅ๎‰Ÿ๎‰ง๎‰ข๎‰Ÿ๎‰ฆ๎€ƒ๎‰จ๎‰ฌ๎‰œ๎‰Ÿ๎‰ช๎‰ซ๎‰ฌ๎‰ข๎‰ฃ๎€ƒ๎‰ข๎‰ฅ๎‰ข๎€ƒ๎‰ญ๎‰ซ๎‰ฌ๎‰š๎‰ง๎‰จ๎‰œ๎‰ค๎‰จ๎‰ฃ๎€ƒ๎‰ค๎‰ช๎‰Ÿ๎‰ฉ๎‰Ÿ๎‰ ๎‰ง๎‰ต๎‰ฏ
๎‰ท๎‰ฅ๎‰Ÿ๎‰ฆ๎‰Ÿ๎‰ง๎‰ฌ๎‰จ๎‰œ๎€ƒ๎‰ˆ๎ˆป๎‰™๎‰๎ˆบ๎‰Œ๎ˆฟ๎‰…๎‰–๎‰‡๎‰ˆ๎€ƒ๎‰ญ๎‰›๎‰Ÿ๎‰ž๎‰ข๎‰ฌ๎‰Ÿ๎‰ซ๎‰ถ๎€ƒ๎‰œ๎€ƒ๎‰ฌ๎‰จ๎‰ฆ, ๎‰ฑ๎‰ฌ๎‰จ๎€ƒ๎‰œ๎€ƒ๎‰ฆ๎‰Ÿ๎‰ซ๎‰ฌ๎‰Ÿ
๎‰ญ๎‰ซ๎‰ฌ๎‰š๎‰ง๎‰จ๎‰œ๎‰ค๎‰ข๎€ƒ๎‰ง๎‰Ÿ๎‰ฌ๎€ƒ๎‰๎‰š๎‰ก๎‰จ๎‰œ๎‰ต๎‰ฏ, ๎‰œ๎‰จ๎‰ž๎‰จ๎‰ฉ๎‰ช๎‰จ๎‰œ๎‰จ๎‰ž๎‰ง๎‰ต๎‰ฏ, ๎‰ค๎‰š๎‰ง๎‰š๎‰ฅ๎‰ข๎‰ก๎‰š๎‰ฐ๎‰ข๎‰จ๎‰ง๎‰ง๎‰ต๎‰ฏ
๎‰ข๎‰ฅ๎‰ข๎€ƒ๎‰ž๎‰ช๎‰ญ๎‰๎‰ข๎‰ฏ๎€ƒ๎‰ฌ๎‰ช๎‰ญ๎‰›.
1. ๎‰Š๎‰š๎‰ก๎‰œ๎‰Ÿ๎‰ช๎‰ง๎‰ข๎‰ฌ๎‰Ÿ๎€ƒ๎‰ซ๎‰ฌ๎‰Ÿ๎‰ง๎‰จ๎‰œ๎‰ญ๎‰ธ๎€ƒ๎‰ฉ๎‰ฅ๎‰š๎‰ซ๎‰ฌ๎‰ข๎‰ง๎‰ญ (A) ๎‰ž๎‰ฅ๎‰น๎€ƒ๎‰ฉ๎‰จ๎‰ž๎‰๎‰จ๎‰ฌ๎‰จ๎‰œ๎‰ค๎‰ข
๎‰ค๎€ƒ๎‰ฆ๎‰จ๎‰ง๎‰ฌ๎‰š๎‰ ๎‰ญ๎€ƒ๎‰ง๎‰š๎€ƒ๎‰ซ๎‰ฌ๎‰Ÿ๎‰ง๎‰ญ.
2. ๎ˆผ๎‰ต๎‰ช๎‰จ๎‰œ๎‰ง๎‰น๎‰ฃ๎‰ฌ๎‰Ÿ๎€ƒ๎‰ฉ๎‰ฅ๎‰š๎‰ซ๎‰ฌ๎‰ข๎‰ง๎‰ญ (A) ๎‰ข๎€ƒ๎‰จ๎‰ฌ๎‰ฆ๎‰Ÿ๎‰ฌ๎‰ถ๎‰ฌ๎‰Ÿ๎€ƒ๎‰ฆ๎‰Ÿ๎‰ซ๎‰ฌ๎‰จ๎‰ฉ๎‰จ๎‰ฅ๎‰จ๎‰ ๎‰Ÿ๎‰ง๎‰ข๎‰Ÿ
๎‰ง๎‰š๎‰ฉ๎‰ช๎‰š๎‰œ๎‰ฅ๎‰น๎‰ธ๎‰ณ๎‰ข๎‰ฏ๎€ƒ๎‰จ๎‰ฌ๎‰œ๎‰Ÿ๎‰ช๎‰ซ๎‰ฌ๎‰ข๎‰ฃ๎€ƒ๎‰œ๎€ƒ๎‰ง๎‰ญ๎‰ ๎‰ง๎‰ต๎‰ฏ๎€ƒ๎‰ฆ๎‰Ÿ๎‰ซ๎‰ฌ๎‰š๎‰ฏ.
๎‰‰๎‰Š๎‰‚๎‰†๎ˆฟ๎‰‘๎ˆบ๎‰‡๎‰‚๎ˆฟ. ๎ˆพ๎‰ฅ๎‰น๎€ƒ๎‰ฆ๎‰จ๎‰ž๎‰Ÿ๎‰ฅ๎‰ข iCLPFM3 ๎‰ฆ๎‰จ๎‰ ๎‰ง๎‰จ
๎‰ข๎‰ซ๎‰ฉ๎‰จ๎‰ฅ๎‰ถ๎‰ก๎‰จ๎‰œ๎‰š๎‰ฌ๎‰ถ๎€ƒ๎‰ฑ๎‰Ÿ๎‰ฌ๎‰ต๎‰ช๎‰Ÿ๎€ƒ๎‰œ๎‰ง๎‰ญ๎‰ฌ๎‰ช๎‰Ÿ๎‰ง๎‰ง๎‰ข๎‰ฏ๎€ƒ๎‰ข๎‰ฅ๎‰ข
๎‰ง๎‰š๎‰ช๎‰ญ๎‰ ๎‰ง๎‰ต๎‰ฏ๎€ƒ๎‰จ๎‰ฌ๎‰œ๎‰Ÿ๎‰ช๎‰ซ๎‰ฌ๎‰ข๎‰น.
๎‰‰๎‰Š๎‰‚๎‰†๎ˆฟ๎‰‘๎ˆบ๎‰‡๎‰‚๎ˆฟ. ๎‰‰๎‰ช๎‰ข๎€ƒ๎‰ญ๎‰ซ๎‰ฌ๎‰š๎‰ง๎‰จ๎‰œ๎‰ค๎‰Ÿ๎€ƒ๎‰ฆ๎‰จ๎‰ž๎‰Ÿ๎‰ฅ๎‰ข iCXPFM3
๎‰ข๎‰ซ๎‰ฉ๎‰จ๎‰ฅ๎‰ถ๎‰ก๎‰ญ๎‰ฃ๎‰ฌ๎‰Ÿ๎€ƒ๎‰ฑ๎‰Ÿ๎‰ฌ๎‰ต๎‰ช๎‰Ÿ๎€ƒ๎‰ง๎‰š๎‰ช๎‰ญ๎‰ ๎‰ง๎‰ต๎‰ฏ๎€ƒ๎‰ข๎€ƒ๎‰ž๎‰œ๎‰š
๎‰ซ๎‰ช๎‰Ÿ๎‰ž๎‰ง๎‰ข๎‰ฏ๎€ƒ๎‰จ๎‰ฌ๎‰œ๎‰Ÿ๎‰ช๎‰ซ๎‰ฌ๎‰ข๎‰น๎€ƒ๎‰ซ๎‰ฌ๎‰Ÿ๎‰ง๎‰จ๎‰œ๎‰จ๎‰ฃ๎€ƒ๎‰ฉ๎‰ฅ๎‰š๎‰ซ๎‰ฌ๎‰ข๎‰ง๎‰ต.
๎‰‰๎‰Š๎‰‚๎‰†๎ˆฟ๎‰‘๎ˆบ๎‰‡๎‰‚๎ˆฟ. ๎‰‹๎‰Ÿ๎‰ช๎‰Ÿ๎‰ž๎‰ข๎‰ง๎‰š๎€ƒ๎‰ท๎‰ค๎‰ช๎‰š๎‰ง๎‰š๎€ƒ๎‰ฉ๎‰จ๎€ƒ๎‰œ๎‰Ÿ๎‰ช๎‰ฌ๎‰ข๎‰ค๎‰š๎‰ฅ๎‰ข๎€ƒ๎‰›๎‰ญ๎‰ž๎‰Ÿ๎‰ฌ
๎‰ซ๎‰จ๎‰œ๎‰ฉ๎‰š๎‰ž๎‰š๎‰ฌ๎‰ถ๎€ƒ๎‰ซ๎€ƒ๎‰ฐ๎‰Ÿ๎‰ง๎‰ฌ๎‰ช๎‰š๎‰ฅ๎‰ถ๎‰ง๎‰จ๎‰ฃ๎€ƒ๎‰ฅ๎‰ข๎‰ง๎‰ข๎‰Ÿ๎‰ฃ,
๎‰จ๎‰›๎‰จ๎‰ก๎‰ง๎‰š๎‰ฑ๎‰Ÿ๎‰ง๎‰ง๎‰จ๎‰ฃ๎€ƒ๎‰ง๎‰š๎€ƒ๎‰ง๎‰š๎‰ค๎‰ฅ๎‰Ÿ๎‰ฃ๎‰ค๎‰š๎‰ฏ,
๎‰ช๎‰š๎‰ซ๎‰ฉ๎‰จ๎‰ฅ๎‰จ๎‰ ๎‰Ÿ๎‰ง๎‰ง๎‰ต๎‰ฏ๎€ƒ๎‰ง๎‰Ÿ๎‰ฉ๎‰จ๎‰ซ๎‰ช๎‰Ÿ๎‰ž๎‰ซ๎‰ฌ๎‰œ๎‰Ÿ๎‰ง๎‰ง๎‰จ๎€ƒ๎‰ฉ๎‰จ๎‰ž
๎‰ค๎‰š๎‰ ๎‰ž๎‰จ๎‰ฃ๎€ƒ๎‰ฉ๎‰Ÿ๎‰ฌ๎‰ฅ๎‰Ÿ๎‰ฃ. ๎‰—๎‰ฌ๎‰จ๎€ƒ๎‰ง๎‰Ÿ๎‰จ๎‰›๎‰ฏ๎‰จ๎‰ž๎‰ข๎‰ฆ๎‰จ
๎‰ญ๎‰ฑ๎‰ข๎‰ฌ๎‰ต๎‰œ๎‰š๎‰ฌ๎‰ถ๎€ƒ๎‰ฉ๎‰ช๎‰ข๎€ƒ๎‰œ๎‰ต๎‰›๎‰จ๎‰ช๎‰Ÿ๎€ƒ๎‰ฆ๎‰Ÿ๎‰ซ๎‰ฌ๎‰š๎€ƒ๎‰ค๎‰ช๎‰Ÿ๎‰ฉ๎‰ฅ๎‰Ÿ๎‰ง๎‰ข๎‰น.
3. ๎‰‰๎‰ช๎‰จ๎‰ซ๎‰œ๎‰Ÿ๎‰ช๎‰ฅ๎‰ข๎‰ฌ๎‰Ÿ๎€ƒ๎‰œ๎€ƒ๎‰ซ๎‰ฌ๎‰Ÿ๎‰ง๎‰Ÿ๎€ƒ๎‰ง๎‰š๎‰ฉ๎‰ช๎‰š๎‰œ๎‰ฅ๎‰น๎‰ธ๎‰ณ๎‰ข๎‰Ÿ๎€ƒ๎‰จ๎‰ฌ๎‰œ๎‰Ÿ๎‰ช๎‰ซ๎‰ฌ๎‰ข๎‰น
๎‰ž๎‰ข๎‰š๎‰ฆ๎‰Ÿ๎‰ฌ๎‰ช๎‰จ๎‰ฆ 8 ๎‰ฆ๎‰ฆ. ๎ˆฝ๎‰ฅ๎‰ญ๎‰›๎‰ข๎‰ง๎‰š๎€ƒ๎‰จ๎‰ฌ๎‰œ๎‰Ÿ๎‰ช๎‰ซ๎‰ฌ๎‰ข๎‰ฃ๎€ƒ๎‰ž๎‰จ๎‰ฅ๎‰ ๎‰ง๎‰š๎€ƒ๎‰›๎‰ต๎‰ฌ๎‰ถ๎€ƒ๎‰ง๎‰Ÿ
๎‰ฆ๎‰Ÿ๎‰ง๎‰Ÿ๎‰Ÿ 8,25 ๎‰ซ๎‰ฆ.
4. ๎ˆผ๎‰ซ๎‰ฌ๎‰š๎‰œ๎‰ถ๎‰ฌ๎‰Ÿ๎€ƒ๎‰œ๎€ƒ๎‰จ๎‰ฌ๎‰œ๎‰Ÿ๎‰ช๎‰ซ๎‰ฌ๎‰ข๎‰Ÿ๎€ƒ๎‰ฑ๎‰Ÿ๎‰ฌ๎‰ต๎‰ช๎‰Ÿ๎€ƒ๎‰š๎‰ง๎‰ค๎‰Ÿ๎‰ช๎‰ง๎‰ต๎‰ฏ๎€ƒ๎‰›๎‰จ๎‰ฅ๎‰ฌ๎‰š (E). ๎ˆพ๎‰ฅ๎‰น
๎‰œ๎‰œ๎‰จ๎‰ž๎‰š๎€ƒ๎‰›๎‰จ๎‰ฅ๎‰ฌ๎‰จ๎‰œ๎€ƒ๎‰œ๎€ƒ๎‰จ๎‰ฌ๎‰œ๎‰Ÿ๎‰ช๎‰ซ๎‰ฌ๎‰ข๎‰น๎€ƒ๎‰ข๎‰ซ๎‰ฉ๎‰จ๎‰ฅ๎‰ถ๎‰ก๎‰ญ๎‰ฃ๎‰ฌ๎‰Ÿ๎€ƒ๎‰ฆ๎‰จ๎‰ฅ๎‰จ๎‰ฌ๎‰จ๎‰ค.
๎ˆผ๎ˆบ๎‰€๎‰‡๎‰ˆ! : ๎‰„๎‰ช๎‰Ÿ๎‰ฉ๎‰ฅ๎‰Ÿ๎‰ง๎‰ข๎‰น๎€ƒ๎‰ž๎‰จ๎‰ฅ๎‰ ๎‰ง๎‰ต๎€ƒ๎‰›๎‰ต๎‰ฌ๎‰ถ๎€ƒ๎‰ญ๎‰ซ๎‰ฌ๎‰š๎‰ง๎‰จ๎‰œ๎‰ฅ๎‰Ÿ๎‰ง๎‰ต๎€ƒ๎‰œ๎€ƒ๎‰ฅ๎‰ธ๎‰›๎‰ญ๎‰ธ
๎‰ฉ๎‰จ๎‰œ๎‰Ÿ๎‰ช๎‰ฏ๎‰ง๎‰จ๎‰ซ๎‰ฌ๎‰ถ๎€ƒ๎‰ซ๎‰ฌ๎‰Ÿ๎‰ง๎‰ต, ๎‰ฉ๎‰จ๎‰ค๎‰š๎€ƒ๎‰ง๎‰Ÿ๎€ƒ๎‰›๎‰ญ๎‰ž๎‰ญ๎‰ฌ๎€ƒ๎‰ญ๎‰ซ๎‰ฌ๎‰š๎‰ง๎‰จ๎‰œ๎‰ฅ๎‰Ÿ๎‰ง๎‰ต๎€ƒ๎‰ก๎‰š๎‰ฉ๎‰จ๎‰ž๎‰ฅ๎‰ข๎‰ฐ๎‰จ๎€ƒ๎‰ซ
๎‰›๎‰Ÿ๎‰ฌ๎‰จ๎‰ง๎‰ง๎‰จ๎‰ฃ๎€ƒ๎‰ซ๎‰ฌ๎‰Ÿ๎‰ง๎‰จ๎‰ฃ.
5. ๎‰‹๎€ƒ๎‰ฉ๎‰จ๎‰ฆ๎‰จ๎‰ณ๎‰ถ๎‰ธ๎€ƒ๎‰ค๎‰ฅ๎‰ธ๎‰ฑ๎‰š 1/2 ๎‰ž๎‰ธ๎‰ฃ๎‰ฆ๎‰š (12,7 ๎‰ฆ๎‰ฆ) ๎‰œ๎‰ค๎‰ช๎‰ญ๎‰ฌ๎‰ข๎‰ฌ๎‰Ÿ๎€ƒ๎‰œ๎‰ข๎‰ง๎‰ฌ๎‰ต
(C) ๎‰ฑ๎‰Ÿ๎‰ช๎‰Ÿ๎‰ก๎€ƒ๎‰ฉ๎‰ฅ๎‰จ๎‰ซ๎‰ค๎‰ข๎‰Ÿ๎€ƒ๎‰ฒ๎‰š๎‰ฃ๎‰›๎‰ต (D) ๎‰ข๎€ƒ๎‰ซ๎‰ฌ๎‰Ÿ๎‰ง๎‰จ๎‰œ๎‰ญ๎‰ธ๎€ƒ๎‰ฉ๎‰ฅ๎‰š๎‰ซ๎‰ฌ๎‰ข๎‰ง๎‰ญ (A) ๎‰œ
๎‰š๎‰ง๎‰ค๎‰Ÿ๎‰ช๎‰ง๎‰ต๎‰Ÿ๎€ƒ๎‰›๎‰จ๎‰ฅ๎‰ฌ๎‰ต (E).
1A
๎€‹๎‰ฉ๎‰จ๎‰ค๎‰š๎‰ก๎‰š๎‰ง๎‰š๎€ƒ๎‰ฆ๎‰จ๎‰ž๎‰Ÿ๎‰ฅ๎‰ถ iCMPFM)
CENTER
LINE
x 4
2
(A)
3
x 4
1/2 ๎‰ž๎‰ธ๎‰ฃ๎‰ฆ๎‰š (12,7 ๎‰ฆ๎‰ฆ)
5
4
(W) X 4
(X) x 4
(Y) x 4
(A)
1
(Y)
๎Šถ๎Œฌ๎Œ–๎Œช๎Œฃ๎Œ–๎Œฆ๎Œ›๎Œ–
๎Œฑ๎Œญ๎Œฏ๎ŒŒ๎Œฆ๎Œจ๎Œ๎Œฃ๎Œ–๎Œฆ๎Œจ
๎Œš๎ŒŒ๎Œช๎Œจ๎Œ”๎Œฃ๎Œ›๎Œถ๎Œจ
๎Œญ๎€ƒ๎Œ๎Œ–๎Œฏ๎Œจ๎Œฆ๎Œฆ๎Œจ๎Œœ๎€ƒ๎Œญ๎Œฏ๎Œ–๎Œฆ๎Œจ๎Œœ
๎Šป๎ŒŒ๎Œช๎Œฌ๎ŒŒ๎Œ๎Œฃ๎๎€๎Œบ๎Œ–๎Œ–๎€ƒ๎Œจ๎Œฏ๎Œ๎Œ–๎Œฌ๎Œญ๎Œฏ๎Œ›๎Œ– -
5/16 x 3 1/4"
(M8 x 82,5mm)
๎Šฅ๎Œ–๎Œฏ๎Œจ๎Œฆ๎Œฆ๎ŒŒ๎๎€ƒ๎Œ›๎Œฃ๎Œ›
๎Œก๎Œ›๎Œฌ๎Œช๎Œ›๎Œธ๎Œฆ๎ŒŒ๎๎€ƒ๎Œญ๎Œฏ๎Œ–๎Œฆ๎ŒŒ
๎Šฟ๎Œจ๎Œ๎Œ–๎Œฌ๎Œต๎Œฆ๎Œจ๎Œญ๎Œฏ๎Œฝ
๎Œญ๎Œฏ๎Œ–๎Œฆ๎Œผ
(A)
(W)
(X)
๎‰‹๎‰Ÿ๎‰ช๎‰ข๎‰น iC-PFM3 ๎‰‚๎‰ง๎‰ซ๎‰ฌ๎‰ช๎‰ญ๎‰ค๎‰ฐ๎‰ข๎‰ข๎€ƒ๎‰ฉ๎‰จ๎€ƒ๎‰ญ๎‰ซ๎‰ฌ๎‰š๎‰ง๎‰จ๎‰œ๎‰ค๎‰Ÿ
42
๎‰๎‰‹๎‰Œ๎ˆบ๎‰‡๎‰ˆ๎ˆผ๎‰‚๎‰Œ๎ˆฟ๎€ƒ๎‰„๎‰Š๎‰ˆ๎‰‡๎‰’๎‰Œ๎ˆฟ๎‰ƒ๎‰‡๎‰•๎€ƒ๎‰‡๎ˆบ
๎‰†๎‰ˆ๎‰‡๎‰‚๎‰Œ๎‰ˆ๎‰Š
๎‰‰๎‰Š๎ˆฟ๎ˆพ๎‰๎‰‰๎‰Š๎ˆฟ๎‰€๎ˆพ๎ˆฟ๎‰‡๎‰‚๎ˆฟ. ๎‰†๎‰ข๎‰ง๎‰ข๎‰ฆ๎‰š๎‰ฅ๎‰ถ๎‰ง๎‰จ๎‰Ÿ๎€ƒ๎‰ช๎‰š๎‰ซ๎‰ซ๎‰ฌ๎‰จ๎‰น๎‰ง๎‰ข๎‰Ÿ
๎‰ฆ๎‰Ÿ๎‰ ๎‰ž๎‰ญ๎€ƒ๎‰จ๎‰ฌ๎‰œ๎‰Ÿ๎‰ช๎‰ซ๎‰ฌ๎‰ข๎‰น๎‰ฆ๎‰ข๎€ƒ๎‰ซ๎‰จ๎‰ซ๎‰ฌ๎‰š๎‰œ๎‰ฅ๎‰น๎‰Ÿ๎‰ฌ 100 ๎‰ฆ๎‰ฆ x 100 ๎‰ฆ๎‰ฆ๎€ƒ๎‰ž๎‰ฅ๎‰น
๎‰ฆ๎‰จ๎‰ž๎‰Ÿ๎‰ฅ๎‰ข iCMPFM3 ๎‰ข 200 ๎‰ฆ๎‰ฆ x 200 ๎‰ฆ๎‰ฆ๎€ƒ๎‰ž๎‰ฅ๎‰น๎€ƒ๎‰ฆ๎‰จ๎‰ž๎‰Ÿ๎‰ฅ๎‰Ÿ๎‰ฃ
iCLPFM3 ๎‰ข iCXPFM3.
1. ๎‰‰๎‰จ๎‰ฅ๎‰จ๎‰ ๎‰ข๎‰ฌ๎‰Ÿ๎€ƒ๎‰ฆ๎‰จ๎‰ง๎‰ข๎‰ฌ๎‰จ๎‰ช๎€ƒ๎‰ท๎‰ค๎‰ช๎‰š๎‰ง๎‰จ๎‰ฆ๎€ƒ๎‰œ๎‰ง๎‰ข๎‰ก๎€ƒ๎‰ง๎‰š๎€ƒ๎‰ฉ๎‰ช๎‰Ÿ๎‰ž๎‰จ๎‰ฏ๎‰ช๎‰š๎‰ง๎‰น๎‰ธ๎‰ณ๎‰ญ๎‰ธ
๎‰จ๎‰ฌ๎€ƒ๎‰ฉ๎‰จ๎‰œ๎‰ช๎‰Ÿ๎‰ ๎‰ž๎‰Ÿ๎‰ง๎‰ข๎‰ฃ๎€ƒ๎‰ฉ๎‰จ๎‰œ๎‰Ÿ๎‰ช๎‰ฏ๎‰ง๎‰จ๎‰ซ๎‰ฌ๎‰ถ.
๎ˆผ๎‰‡๎‰‚๎‰†๎ˆบ๎‰‡๎‰‚๎ˆฟ. ๎‰‚๎‰ซ๎‰ฉ๎‰จ๎‰ฅ๎‰ถ๎‰ก๎‰จ๎‰œ๎‰š๎‰ง๎‰ข๎‰Ÿ๎€ƒ๎‰œ๎‰ข๎‰ง๎‰ฌ๎‰จ๎‰œ
๎‰ง๎‰Ÿ๎‰ซ๎‰จ๎‰จ๎‰ฌ๎‰œ๎‰Ÿ๎‰ฌ๎‰ซ๎‰ฌ๎‰œ๎‰ญ๎‰ธ๎‰ณ๎‰Ÿ๎‰๎‰จ๎€ƒ๎‰ž๎‰ข๎‰š๎‰ฆ๎‰Ÿ๎‰ฌ๎‰ช๎‰š๎€ƒ๎‰ฆ๎‰จ๎‰ ๎‰Ÿ๎‰ฌ๎€ƒ๎‰ฉ๎‰จ๎‰œ๎‰ช๎‰Ÿ๎‰ž๎‰ข๎‰ฌ๎‰ถ
๎‰ฆ๎‰จ๎‰ง๎‰ข๎‰ฌ๎‰จ๎‰ช! ๎ˆผ๎‰ข๎‰ง๎‰ฌ๎‰ต๎€ƒ๎‰ซ๎‰จ๎‰จ๎‰ฌ๎‰œ๎‰Ÿ๎‰ฌ๎‰ซ๎‰ฌ๎‰œ๎‰ญ๎‰ธ๎‰ณ๎‰Ÿ๎‰๎‰จ๎€ƒ๎‰ž๎‰ข๎‰š๎‰ฆ๎‰Ÿ๎‰ฌ๎‰ช๎‰š๎€ƒ๎‰ฅ๎‰Ÿ๎‰๎‰ค๎‰จ
๎‰œ๎‰ค๎‰ช๎‰ญ๎‰ฑ๎‰ข๎‰œ๎‰š๎‰ธ๎‰ฌ๎‰ซ๎‰น๎€ƒ๎‰œ๎€ƒ๎‰ฆ๎‰จ๎‰ง๎‰ฌ๎‰š๎‰ ๎‰ง๎‰ต๎‰Ÿ๎€ƒ๎‰จ๎‰ฌ๎‰œ๎‰Ÿ๎‰ช๎‰ซ๎‰ฌ๎‰ข๎‰น.
2. ๎‰‰๎‰จ๎‰ž๎‰›๎‰Ÿ๎‰ช๎‰ข๎‰ฌ๎‰Ÿ ๎‰ž๎‰ข๎‰š๎‰ฆ๎‰Ÿ๎‰ฌ๎‰ช๎€ƒ๎‰œ๎‰ข๎‰ง๎‰ฌ๎‰š, ๎‰ฉ๎‰จ๎‰จ๎‰ฑ๎‰Ÿ๎‰ช๎‰Ÿ๎‰ž๎‰ง๎‰จ๎€ƒ๎‰œ๎‰ต๎‰ง๎‰ข๎‰ฆ๎‰š๎‰น
๎‰ค๎‰ช๎‰Ÿ๎‰ฉ๎‰Ÿ๎‰ ๎€ƒ๎‰ข๎‰ก๎€ƒ๎‰ฉ๎‰š๎‰ค๎‰Ÿ๎‰ฌ๎‰จ๎‰œ (FA-FO) (8 ๎‰ฆ๎‰ฆ, 6 ๎‰ฆ๎‰ฆ, 5 ๎‰ฆ๎‰ฆ๎€ƒ๎‰ข๎‰ฅ๎‰ข
4 ๎‰ฆ๎‰ฆ) ๎‰ข๎€ƒ๎‰ซ๎‰ช๎‰š๎‰œ๎‰ง๎‰ข๎‰œ๎‰š๎‰ง๎‰ข๎‰น๎€ƒ๎‰Ÿ๎‰๎‰จ๎€ƒ๎‰ซ๎€ƒ๎‰ฆ๎‰จ๎‰ง๎‰ฌ๎‰š๎‰ ๎‰ง๎‰ต๎‰ฆ๎‰ข
๎‰จ๎‰ฌ๎‰œ๎‰Ÿ๎‰ช๎‰ซ๎‰ฌ๎‰ข๎‰น๎‰ฆ๎‰ข๎€ƒ๎‰ง๎‰š๎€ƒ๎‰ฆ๎‰จ๎‰ง๎‰ข๎‰ฌ๎‰จ๎‰ช๎‰Ÿ.
3. ๎‰‰๎‰จ๎‰ž๎‰›๎‰Ÿ๎‰ช๎‰ข๎‰ฌ๎‰Ÿ๎€ƒ๎‰œ๎‰ฌ๎‰ญ๎‰ฅ๎‰ค๎‰ข.
โ€ข ๎ˆฟ๎‰ซ๎‰ฅ๎‰ข๎€ƒ๎‰ฆ๎‰จ๎‰ง๎‰ฌ๎‰š๎‰ ๎‰ง๎‰ต๎‰Ÿ๎€ƒ๎‰จ๎‰ฌ๎‰œ๎‰Ÿ๎‰ช๎‰ซ๎‰ฌ๎‰ข๎‰น๎€ƒ๎‰ง๎‰Ÿ๎€ƒ๎‰ญ๎‰ฌ๎‰จ๎‰ฉ๎‰ฅ๎‰Ÿ๎‰ง๎‰ต,
๎‰š๎€ƒ๎‰จ๎‰›๎‰š๎€ƒ๎‰ค๎‰ช๎‰จ๎‰ง๎‰ฒ๎‰ฌ๎‰Ÿ๎‰ฃ๎‰ง๎‰š (B) ๎‰ฉ๎‰ฅ๎‰จ๎‰ฌ๎‰ง๎‰จ๎€ƒ๎‰ฉ๎‰ช๎‰ข๎‰ ๎‰š๎‰ฌ๎‰ต
๎‰ค๎€ƒ๎‰ฆ๎‰จ๎‰ง๎‰ข๎‰ฌ๎‰จ๎‰ช๎‰ญ, ๎‰ฌ๎‰จ๎€ƒ๎‰œ๎‰ฌ๎‰ญ๎‰ฅ๎‰ค๎‰ข๎€ƒ๎‰ง๎‰Ÿ๎€ƒ๎‰ง๎‰ญ๎‰ ๎‰ง๎‰ต.
โ€ข ๎ˆฟ๎‰ซ๎‰ฅ๎‰ข๎€ƒ๎‰ฆ๎‰จ๎‰ง๎‰ฌ๎‰š๎‰ ๎‰ง๎‰ต๎‰Ÿ๎€ƒ๎‰จ๎‰ฌ๎‰œ๎‰Ÿ๎‰ช๎‰ซ๎‰ฌ๎‰ข๎‰น๎€ƒ๎‰ญ๎‰ฌ๎‰จ๎‰ฉ๎‰ฅ๎‰Ÿ๎‰ง๎‰ต๎€ƒ๎‰ข๎‰ฅ๎‰ข
๎‰Ÿ๎‰ซ๎‰ฅ๎‰ข๎€ƒ๎‰œ๎‰ต๎‰ซ๎‰ฌ๎‰ญ๎‰ฉ๎‰ต๎€ƒ๎‰ง๎‰Ÿ๎€ƒ๎‰ž๎‰š๎‰ธ๎‰ฌ๎€ƒ๎‰ฉ๎‰ฅ๎‰จ๎‰ฌ๎‰ง๎‰จ๎€ƒ๎‰ฉ๎‰ช๎‰ข๎‰ ๎‰š๎‰ฌ๎‰ถ
๎‰ค๎‰ช๎‰จ๎‰ง๎‰ฒ๎‰ฌ๎‰Ÿ๎‰ฃ๎‰ง๎‰ต (B) ๎‰ค๎€ƒ๎‰ฆ๎‰จ๎‰ง๎‰ข๎‰ฌ๎‰จ๎‰ช๎‰ญ, ๎‰ซ๎‰ฅ๎‰Ÿ๎‰ž๎‰ญ๎‰Ÿ๎‰ฌ
๎‰ข๎‰ซ๎‰ฉ๎‰จ๎‰ฅ๎‰ถ๎‰ก๎‰จ๎‰œ๎‰š๎‰ฌ๎‰ถ๎€ƒ๎‰œ๎‰ฌ๎‰ญ๎‰ฅ๎‰ค๎‰ข (FP ๎‰ข๎‰ฅ๎‰ข FQ).
โ€ข ๎ˆฟ๎‰ซ๎‰ฅ๎‰ข๎€ƒ๎‰ง๎‰Ÿ๎‰จ๎‰›๎‰ฏ๎‰จ๎‰ž๎‰ข๎‰ฆ๎‰จ๎€ƒ๎‰จ๎‰›๎‰Ÿ๎‰ซ๎‰ฉ๎‰Ÿ๎‰ฑ๎‰ข๎‰ฌ๎‰ถ๎€ƒ๎‰ž๎‰จ๎‰ฉ๎‰จ๎‰ฅ๎‰ง๎‰ข๎‰ฌ๎‰Ÿ๎‰ฅ๎‰ถ๎‰ง๎‰จ๎‰Ÿ
๎‰ฉ๎‰ช๎‰จ๎‰ซ๎‰ฌ๎‰ช๎‰š๎‰ง๎‰ซ๎‰ฌ๎‰œ๎‰จ๎€ƒ๎‰ก๎‰š๎€ƒ๎‰ท๎‰ค๎‰ช๎‰š๎‰ง๎‰จ๎‰ฆ, ๎‰ฆ๎‰จ๎‰ ๎‰ง๎‰จ๎€ƒ๎‰ฉ๎‰ช๎‰ข๎‰ฆ๎‰Ÿ๎‰ง๎‰น๎‰ฌ๎‰ถ
๎‰œ๎‰ฌ๎‰ญ๎‰ฅ๎‰ค๎‰ข (FP ๎‰ข FQ), ๎‰ญ๎‰ซ๎‰ฌ๎‰š๎‰ง๎‰จ๎‰œ๎‰ฅ๎‰Ÿ๎‰ง๎‰ง๎‰ต๎‰Ÿ๎€ƒ๎‰จ๎‰ž๎‰ง๎‰š๎€ƒ๎‰ง๎‰š
๎‰ž๎‰ช๎‰ญ๎‰๎‰ญ๎‰ธ.
๎ˆผ๎‰‡๎‰‚๎‰†๎ˆบ๎‰‡๎‰‚๎ˆฟ. ๎‰‚๎‰ซ๎‰ฉ๎‰จ๎‰ฅ๎‰ถ๎‰ก๎‰จ๎‰œ๎‰š๎‰ง๎‰ข๎‰Ÿ๎€ƒ๎‰œ๎‰ข๎‰ง๎‰ฌ๎‰จ๎‰œ
๎‰ง๎‰Ÿ๎‰ซ๎‰จ๎‰จ๎‰ฌ๎‰œ๎‰Ÿ๎‰ฌ๎‰ซ๎‰ฌ๎‰œ๎‰ญ๎‰ธ๎‰ณ๎‰Ÿ๎‰ฃ๎€ƒ๎‰ž๎‰ฅ๎‰ข๎‰ง๎‰ต๎€ƒ๎‰ฆ๎‰จ๎‰ ๎‰Ÿ๎‰ฌ๎€ƒ๎‰ฉ๎‰จ๎‰œ๎‰ช๎‰Ÿ๎‰ž๎‰ข๎‰ฌ๎‰ถ
๎‰ฆ๎‰จ๎‰ง๎‰ข๎‰ฌ๎‰จ๎‰ช! ๎ˆผ๎‰ข๎‰ง๎‰ฌ๎‰ต๎€ƒ๎‰ซ๎‰จ๎‰จ๎‰ฌ๎‰œ๎‰Ÿ๎‰ฌ๎‰ซ๎‰ฌ๎‰œ๎‰ญ๎‰ธ๎‰ณ๎‰Ÿ๎‰ฃ๎€ƒ๎‰ž๎‰ฅ๎‰ข๎‰ง๎‰ต
๎‰œ๎‰ค๎‰ช๎‰ญ๎‰ฑ๎‰ข๎‰œ๎‰š๎‰ธ๎‰ฌ๎‰ซ๎‰น๎€ƒ๎‰ง๎‰š๎€ƒ๎‰ž๎‰จ๎‰ซ๎‰ฌ๎‰š๎‰ฌ๎‰จ๎‰ฑ๎‰ง๎‰จ๎‰Ÿ๎€ƒ๎‰ช๎‰š๎‰ซ๎‰ซ๎‰ฌ๎‰จ๎‰น๎‰ง๎‰ข๎‰Ÿ,
๎‰ง๎‰Ÿ๎€ƒ๎‰ž๎‰จ๎‰ฏ๎‰จ๎‰ž๎‰น๎€ƒ๎‰ž๎‰จ๎€ƒ๎‰ฆ๎‰จ๎‰ง๎‰ฌ๎‰š๎‰ ๎‰ง๎‰ต๎‰ฏ๎€ƒ๎‰จ๎‰ฌ๎‰œ๎‰Ÿ๎‰ช๎‰ซ๎‰ฌ๎‰ข๎‰ฃ๎€ƒ๎‰ฆ๎‰จ๎‰ง๎‰ข๎‰ฌ๎‰จ๎‰ช๎‰š.
4. ๎‰‰๎‰จ๎‰ž๎‰›๎‰Ÿ๎‰ช๎‰ข๎‰ฌ๎‰Ÿ ๎‰ž๎‰ฅ๎‰ข๎‰ง๎‰ญ๎€ƒ๎‰œ๎‰ข๎‰ง๎‰ฌ๎‰จ๎‰œ.
โ€ข ๎‰Š๎‰ญ๎‰ค๎‰จ๎‰ฃ๎€ƒ๎‰œ๎‰ค๎‰ช๎‰ญ๎‰ฌ๎‰ข๎‰ฌ๎‰Ÿ๎€ƒ๎‰‹๎ˆบ๎‰†๎‰•๎‰ƒ๎€ƒ๎‰„๎‰ˆ๎‰Š๎‰ˆ๎‰Œ๎‰„๎‰‚๎‰ƒ๎€ƒ๎‰œ๎‰ข๎‰ง๎‰ฌ
๎‰œ๎‰ต๎‰›๎‰ช๎‰š๎‰ง๎‰ง๎‰จ๎‰๎‰จ๎€ƒ๎‰ž๎‰ข๎‰š๎‰ฆ๎‰Ÿ๎‰ฌ๎‰ช๎‰š (FA, FE, FI ๎‰ข๎‰ฅ๎‰ข FL) ๎‰ฑ๎‰Ÿ๎‰ช๎‰Ÿ๎‰ก
๎‰ค๎‰ช๎‰จ๎‰ง๎‰ฒ๎‰ฌ๎‰Ÿ๎‰ฃ๎‰ง (B), ๎‰ญ๎‰ง๎‰ข๎‰œ๎‰Ÿ๎‰ช๎‰ซ๎‰š๎‰ฅ๎‰ถ๎‰ง๎‰ญ๎‰ธ๎€ƒ๎‰ฒ๎‰š๎‰ฃ๎‰›๎‰ญ (FS),
๎‰œ๎‰ต๎‰›๎‰ช๎‰š๎‰ง๎‰ง๎‰ญ๎‰ธ๎€ƒ๎‰œ๎‰ฌ๎‰ญ๎‰ฅ๎‰ค๎‰ญ ๎‰œ๎€ƒ๎‰ฌ๎‰จ๎‰ช๎‰ฐ๎‰Ÿ๎‰œ๎‰ญ๎‰ธ๎€ƒ๎‰ฉ๎‰š๎‰ง๎‰Ÿ๎‰ฅ๎‰ถ (E),
๎‰œ๎‰ต๎‰›๎‰ช๎‰š๎‰ง๎‰ง๎‰ญ๎‰ธ๎€ƒ๎‰œ๎‰ฌ๎‰ญ๎‰ฅ๎‰ค๎‰ญ (FP ๎‰ข๎‰ฅ๎‰ข FQ, ๎‰Ÿ๎‰ซ๎‰ฅ๎‰ข
๎‰ฌ๎‰ช๎‰Ÿ๎‰›๎‰ญ๎‰Ÿ๎‰ฌ๎‰ซ๎‰น) ๎‰œ๎€ƒ๎‰จ๎‰ฌ๎‰œ๎‰Ÿ๎‰ช๎‰ซ๎‰ฌ๎‰ข๎‰Ÿ๎€ƒ๎‰ค๎‰ช๎‰Ÿ๎‰ฉ๎‰ฅ๎‰Ÿ๎‰ง๎‰ข๎‰น๎€ƒ๎‰ฆ๎‰จ๎‰ง๎‰ข๎‰ฌ๎‰จ๎‰ช๎‰š.
๎‰‰๎‰จ๎‰ค๎‰š๎€ƒ๎‰‡๎ˆฟ๎€ƒ๎ˆผ๎‰„๎‰Š๎‰๎‰‘๎‰‚๎ˆผ๎ˆบ๎‰ƒ๎‰Œ๎ˆฟ๎€ƒ๎‰œ๎‰ข๎‰ง๎‰ฌ๎€ƒ๎‰œ๎€ƒ๎‰ฆ๎‰จ๎‰ง๎‰ฌ๎‰š๎‰ ๎‰ง๎‰จ๎‰Ÿ
๎‰จ๎‰ฌ๎‰œ๎‰Ÿ๎‰ช๎‰ซ๎‰ฌ๎‰ข๎‰Ÿ.
โ€ข ๎ˆฟ๎‰ซ๎‰ฅ๎‰ข๎€ƒ๎‰œ๎‰ต๎‰›๎‰ช๎‰š๎‰ง๎€ƒ๎‰œ๎‰ข๎‰ง๎‰ฌ๎€ƒ๎‰ซ๎‰จ๎‰จ๎‰ฌ๎‰œ๎‰Ÿ๎‰ฌ๎‰ซ๎‰ฌ๎‰œ๎‰ญ๎‰ธ๎‰ณ๎‰Ÿ๎‰ฃ๎€ƒ๎‰ž๎‰ฅ๎‰ข๎‰ง๎‰ต,
๎‰จ๎‰ซ๎‰ง๎‰จ๎‰œ๎‰š๎‰ง๎‰ข๎‰Ÿ๎€ƒ๎‰Ÿ๎‰๎‰จ๎€ƒ๎‰๎‰จ๎‰ฅ๎‰จ๎‰œ๎‰ค๎‰ข๎€ƒ๎‰›๎‰ญ๎‰ž๎‰Ÿ๎‰ฌ๎€ƒ๎‰œ๎‰ต๎‰ซ๎‰ฌ๎‰ญ๎‰ฉ๎‰š๎‰ฌ๎‰ถ๎€ƒ๎‰ง๎‰š๎‰ž
๎‰ฉ๎‰ฅ๎‰จ๎‰ซ๎‰ค๎‰จ๎‰ฃ๎€ƒ๎‰ฒ๎‰š๎‰ฃ๎‰›๎‰จ๎‰ฃ๎€ƒ๎‰ง๎‰š๎€ƒ๎‰œ๎‰ต๎‰ซ๎‰จ๎‰ฌ๎‰ญ, ๎‰ช๎‰š๎‰œ๎‰ง๎‰ญ๎‰ธ๎€ƒ๎‰ž๎‰ข๎‰š๎‰ฆ๎‰Ÿ๎‰ฌ๎‰ช๎‰ญ
๎‰œ๎‰ข๎‰ง๎‰ฌ๎‰š๎€ƒ๎‰ข๎‰ฅ๎‰ข๎€ƒ๎‰ฉ๎‰ช๎‰Ÿ๎‰œ๎‰ต๎‰ฒ๎‰š๎‰ธ๎‰ณ๎‰ญ๎‰ธ๎€ƒ๎‰Ÿ๎‰๎‰จ. ๎ˆฟ๎‰ซ๎‰ฅ๎‰ข๎€ƒ๎‰ž๎‰ฅ๎‰ข๎‰ง๎‰š
๎‰œ๎‰ข๎‰ง๎‰ฌ๎‰š๎€ƒ๎‰ง๎‰Ÿ๎‰ž๎‰จ๎‰ซ๎‰ฌ๎‰š๎‰ฌ๎‰จ๎‰ฑ๎‰ง๎‰š, ๎‰œ๎‰ค๎‰ช๎‰ญ๎‰ฌ๎‰ข๎‰ฌ๎‰Ÿ๎€ƒ๎‰›๎‰จ๎‰ฅ๎‰Ÿ๎‰Ÿ๎€ƒ๎‰ž๎‰ฅ๎‰ข๎‰ง๎‰ง๎‰ต๎‰ฃ
๎‰œ๎‰ข๎‰ง๎‰ฌ. ๎ˆผ๎‰ต๎‰›๎‰Ÿ๎‰ช๎‰ข๎‰ฌ๎‰Ÿ ๎‰ซ๎‰š๎‰ฆ๎‰ต๎‰ฃ๎€ƒ๎‰ค๎‰จ๎‰ช๎‰จ๎‰ฌ๎‰ค๎‰ข๎‰ฃ๎€ƒ๎‰œ๎‰ข๎‰ง๎‰ฌ, ๎‰ค๎‰จ๎‰ฌ๎‰จ๎‰ช๎‰ต๎‰ฃ
๎‰›๎‰ญ๎‰ž๎‰Ÿ๎‰ฌ๎€ƒ๎‰œ๎‰ต๎‰ซ๎‰ฌ๎‰ญ๎‰ฉ๎‰š๎‰ฌ๎‰ถ๎€ƒ๎‰ง๎‰š๎€ƒ๎‰ฌ๎‰ช๎‰Ÿ๎‰›๎‰ญ๎‰Ÿ๎‰ฆ๎‰ญ๎‰ธ๎€ƒ๎‰œ๎‰ต๎‰ซ๎‰จ๎‰ฌ๎‰ญ.
5. ๎‰‰๎‰จ๎‰ฆ๎‰Ÿ๎‰ซ๎‰ฌ๎‰ข๎‰ฌ๎‰Ÿ๎€ƒ๎‰ค๎‰ช๎‰จ๎‰ง๎‰ฒ๎‰ฌ๎‰Ÿ๎‰ฃ๎‰ง๎‰ต (B) ๎‰ง๎‰š๎€ƒ๎‰ฆ๎‰จ๎‰ง๎‰ข๎‰ฌ๎‰จ๎‰ช, ๎‰จ๎‰›๎‰Ÿ๎‰ซ๎‰ฉ๎‰Ÿ๎‰ฑ๎‰ข๎‰œ
๎‰ซ๎‰ฅ๎‰Ÿ๎‰ž๎‰ญ๎‰ธ๎‰ณ๎‰ข๎‰Ÿ๎€ƒ๎‰ญ๎‰ซ๎‰ฅ๎‰จ๎‰œ๎‰ข๎‰น:
โ€ข ๎ˆผ๎‰Ÿ๎‰ช๎‰ฏ๎‰ง๎‰ข๎‰Ÿ๎€ƒ๎‰ซ๎‰ค๎‰จ๎‰›๎‰ต๎€ƒ๎‰ง๎‰š๎‰ฉ๎‰ช๎‰š๎‰œ๎‰ฅ๎‰Ÿ๎‰ง๎‰ต๎€ƒ๎‰ค ๎‰œ๎‰Ÿ๎‰ช๎‰ฏ๎‰ง๎‰Ÿ๎‰ฃ๎€ƒ๎‰ฑ๎‰š๎‰ซ๎‰ฌ๎‰ข
๎‰ฆ๎‰จ๎‰ง๎‰ข๎‰ฌ๎‰จ๎‰ช๎‰š.
โ€ข ๎‰๎‰Ÿ๎‰ง๎‰ฌ๎‰ช๎€ƒ๎‰ค๎‰ช๎‰จ๎‰ง๎‰ฒ๎‰ฌ๎‰Ÿ๎‰ฃ๎‰ง๎‰จ๎‰œ (B) ๎‰ง๎‰š๎‰ฏ๎‰จ๎‰ž๎‰ข๎‰ฌ๎‰ซ๎‰น๎€ƒ๎‰ฆ๎‰š๎‰ค๎‰ซ๎‰ข๎‰ฆ๎‰š๎‰ฅ๎‰ถ๎‰ง๎‰จ
๎‰›๎‰ฅ๎‰ข๎‰ก๎‰ค๎‰จ๎€ƒ๎‰ค๎€ƒ๎‰ฐ๎‰Ÿ๎‰ง๎‰ฌ๎‰ช๎‰ญ๎€ƒ๎‰ก๎‰š๎‰ž๎‰ง๎‰Ÿ๎‰ฃ๎€ƒ๎‰ฉ๎‰š๎‰ง๎‰Ÿ๎‰ฅ๎‰ข๎€ƒ๎‰ฆ๎‰จ๎‰ง๎‰ข๎‰ฌ๎‰จ๎‰ช๎‰š.
๎‰๎‰Ÿ๎‰ง๎‰ฌ๎‰ช๎€ƒ๎‰ค๎‰ช๎‰จ๎‰ง๎‰ฒ๎‰ฌ๎‰Ÿ๎‰ฃ๎‰ง๎‰š๎€ƒ๎‰จ๎‰ฌ๎‰ฆ๎‰Ÿ๎‰ฑ๎‰Ÿ๎‰ง๎€ƒ๎‰ช๎‰จ๎‰ฆ๎‰›๎‰จ๎‰œ๎‰ข๎‰ž๎‰ง๎‰ต๎‰ฆ
๎‰จ๎‰ฌ๎‰œ๎‰Ÿ๎‰ช๎‰ซ๎‰ฌ๎‰ข๎‰Ÿ๎‰ฆ.
6. C ๎‰ฉ๎‰จ๎‰ฆ๎‰จ๎‰ณ๎‰ถ๎‰ธ๎€ƒ๎‰ค๎‰ช๎‰Ÿ๎‰ซ๎‰ฌ๎‰จ๎‰จ๎‰›๎‰ช๎‰š๎‰ก๎‰ง๎‰จ๎‰ฃ๎€ƒ๎‰จ๎‰ฌ๎‰œ๎‰Ÿ๎‰ช๎‰ฌ๎‰ค๎‰ข๎€ƒ๎‰š๎‰ค๎‰ค๎‰ญ๎‰ช๎‰š๎‰ฌ๎‰ง๎‰จ
๎‰œ๎‰ค๎‰ช๎‰ญ๎‰ฌ๎‰ข๎‰ฌ๎‰Ÿ๎€ƒ๎‰œ๎‰ต๎‰›๎‰ช๎‰š๎‰ง๎‰ง๎‰ต๎‰Ÿ๎€ƒ๎‰œ๎‰ข๎‰ง๎‰ฌ๎‰ต๎€ƒ๎‰ฑ๎‰Ÿ๎‰ช๎‰Ÿ๎‰ก๎€ƒ๎‰ญ๎‰ง๎‰ข๎‰œ๎‰Ÿ๎‰ช๎‰ซ๎‰š๎‰ฅ๎‰ถ๎‰ง๎‰ต๎‰Ÿ
๎‰ฒ๎‰š๎‰ฃ๎‰›๎‰ต (FS), ๎‰ค๎‰ช๎‰จ๎‰ง๎‰ฒ๎‰ฌ๎‰Ÿ๎‰ฃ๎‰ง๎‰ต (B) ๎‰ข๎€ƒ๎‰œ๎‰ฌ๎‰ญ๎‰ฅ๎‰ค๎‰ข (FP ๎‰ข๎‰ฅ๎‰ข FQ,
๎‰Ÿ๎‰ซ๎‰ฅ๎‰ข๎€ƒ๎‰ฌ๎‰ช๎‰Ÿ๎‰›๎‰ญ๎‰Ÿ๎‰ฌ๎‰ซ๎‰น) ๎‰œ๎€ƒ๎‰ฆ๎‰จ๎‰ง๎‰ข๎‰ฌ๎‰จ๎‰ช.
7. ๎‰๎‰š๎‰ฌ๎‰น๎‰ง๎‰ข๎‰ฌ๎‰Ÿ๎€ƒ๎‰œ๎‰ซ๎‰Ÿ๎€ƒ๎‰œ๎‰ข๎‰ง๎‰ฌ๎‰ต. ๎‰๎‰›๎‰Ÿ๎‰ž๎‰ข๎‰ฌ๎‰Ÿ๎‰ซ๎‰ถ, ๎‰ฑ๎‰ฌ๎‰จ๎€ƒ๎‰ข๎‰ซ๎‰ฉ๎‰จ๎‰ฅ๎‰ถ๎‰ก๎‰จ๎‰œ๎‰š๎‰ง๎‰ต๎€ƒ๎‰œ๎‰ซ๎‰Ÿ
๎‰ซ๎‰จ๎‰จ๎‰ฌ๎‰œ๎‰Ÿ๎‰ฌ๎‰ซ๎‰ฌ๎‰œ๎‰ญ๎‰ธ๎‰ณ๎‰ข๎‰Ÿ๎€ƒ๎‰ฆ๎‰จ๎‰ง๎‰ฌ๎‰š๎‰ ๎‰ง๎‰ต๎‰Ÿ๎€ƒ๎‰จ๎‰ฌ๎‰œ๎‰Ÿ๎‰ช๎‰ซ๎‰ฌ๎‰ข๎‰น (4, 6 ๎‰ข๎‰ฅ๎‰ข 8).
2
2 4
6
5
6
2 4
5
๎€‹๎‰ง๎‰Ÿ๎€ƒ๎‰ญ๎‰ฌ๎‰จ๎‰ฉ๎‰ฅ๎‰Ÿ๎‰ง๎‰ง๎‰ต๎‰Ÿ๎€ƒ๎‰จ๎‰ฌ๎‰œ๎‰Ÿ๎‰ช๎‰ซ๎‰ฌ๎‰ข๎‰น)
(FS) x 4, x 6, x 8
(FS) x 4, x 6, x 8
3
(FA-FO) x 4, x 6, x 8
(FA-FO) x 4, x 6, x 8
(B) x 2
(FP ๎‰ข๎‰ฅ๎‰ข FQ)*
(B) x 2
๎€‹๎‰ง๎‰Ÿ๎‰จ๎‰›๎‰ฏ๎‰จ๎‰ž๎‰ข๎‰ฆ๎‰ต๎€ƒ๎‰ญ๎‰ฌ๎‰จ๎‰ฉ๎‰ฅ๎‰Ÿ๎‰ง๎‰ง๎‰ต๎‰Ÿ๎€ƒ๎‰จ๎‰ฌ๎‰œ๎‰Ÿ๎‰ช๎‰ซ๎‰ฌ๎‰ข๎‰น
๎‰ข๎‰ฅ๎‰ข๎€ƒ๎‰ž๎‰จ๎‰ฉ๎‰จ๎‰ฅ๎‰ง๎‰ข๎‰ฌ๎‰Ÿ๎‰ฅ๎‰ถ๎‰ง๎‰จ๎‰Ÿ๎€ƒ๎‰ฉ๎‰ช๎‰จ๎‰ซ๎‰ฌ๎‰ช๎‰š๎‰ง๎‰ซ๎‰ฌ๎‰œ๎‰จ)
๎€๎ˆฟ๎‰ซ๎‰ฅ๎‰ข๎€ƒ๎‰ง๎‰Ÿ๎‰จ๎‰›๎‰ฏ๎‰จ๎‰ž๎‰ข๎‰ฆ๎‰จ๎€ƒ๎‰จ๎‰›๎‰Ÿ๎‰ซ๎‰ฉ๎‰Ÿ๎‰ฑ๎‰ข๎‰ฌ๎‰ถ๎€ƒ๎‰ž๎‰จ๎‰ฉ๎‰จ๎‰ฅ๎‰ง๎‰ข๎‰ฌ๎‰Ÿ๎‰ฅ๎‰ถ๎‰ง๎‰จ๎‰Ÿ
๎‰ฉ๎‰ช๎‰จ๎‰ซ๎‰ฌ๎‰ช๎‰š๎‰ง๎‰ซ๎‰ฌ๎‰œ๎‰จ, ๎‰ฆ๎‰จ๎‰ ๎‰ง๎‰จ๎€ƒ๎‰ฉ๎‰ช๎‰ข๎‰ฆ๎‰Ÿ๎‰ง๎‰น๎‰ฌ๎‰ถ๎€ƒ๎‰œ๎‰ฌ๎‰ญ๎‰ฅ๎‰ค๎‰ข (FP ๎‰ข FQ),
๎‰ญ๎‰ซ๎‰ฌ๎‰š๎‰ง๎‰จ๎‰œ๎‰ฅ๎‰Ÿ๎‰ง๎‰ง๎‰ต๎‰Ÿ๎€ƒ๎‰จ๎‰ž๎‰ง๎‰š๎€ƒ๎‰ง๎‰š๎€ƒ๎‰ž๎‰ช๎‰ญ๎‰๎‰ญ๎‰ธ.
๎‰‚๎‰ง๎‰ซ๎‰ฌ๎‰ช๎‰ญ๎‰ค๎‰ฐ๎‰ข๎‰ข๎€ƒ๎‰ฉ๎‰จ๎€ƒ๎‰ญ๎‰ซ๎‰ฌ๎‰š๎‰ง๎‰จ๎‰œ๎‰ค๎‰Ÿ ๎‰‹๎‰Ÿ๎‰ช๎‰ข๎‰น iC-PFM3
43
3
๎‰๎‰‹๎‰Œ๎ˆบ๎‰‡๎‰ˆ๎ˆผ๎‰„๎ˆบ๎€ƒ๎‰†๎‰ˆ๎‰‡๎‰‚๎‰Œ๎‰ˆ๎‰Š๎ˆบ๎€ƒ๎‰‡๎ˆบ
๎‰‹๎‰Œ๎ˆฟ๎‰‡๎‰ˆ๎ˆผ๎‰๎‰˜๎€ƒ๎‰‰๎‰…๎ˆบ๎‰‹๎‰Œ๎‰‚๎‰‡๎‰
๎‰‰๎‰Š๎ˆฟ๎ˆพ๎‰๎‰‰๎‰Š๎ˆฟ๎‰€๎ˆพ๎ˆฟ๎‰‡๎‰‚๎ˆฟ. ๎‰‰๎‰ช๎‰Ÿ๎‰œ๎‰ต๎‰ฒ๎‰Ÿ๎‰ง๎‰ข๎‰Ÿ๎€ƒ๎‰ง๎‰š๎‰๎‰ช๎‰ญ๎‰ก๎‰ค๎‰ข
๎‰ฉ๎‰จ๎€ƒ๎‰œ๎‰Ÿ๎‰ซ๎‰ญ๎€ƒ๎‰ฆ๎‰จ๎‰ ๎‰Ÿ๎‰ฌ๎€ƒ๎‰ฉ๎‰ช๎‰ข๎‰œ๎‰Ÿ๎‰ซ๎‰ฌ๎‰ข๎€ƒ๎‰ค๎€ƒ๎‰ซ๎‰Ÿ๎‰ช๎‰ถ๎‰Ÿ๎‰ก๎‰ง๎‰ต๎‰ฆ๎€ƒ๎‰ฌ๎‰ช๎‰š๎‰œ๎‰ฆ๎‰š๎‰ฆ
๎‰ข๎€ƒ๎‰ฉ๎‰จ๎‰œ๎‰ช๎‰Ÿ๎‰ ๎‰ž๎‰Ÿ๎‰ง๎‰ข๎‰ธ๎€ƒ๎‰จ๎‰›๎‰จ๎‰ช๎‰ญ๎‰ž๎‰จ๎‰œ๎‰š๎‰ง๎‰ข๎‰น! ๎‰…๎‰ข๎‰ฐ๎‰จ, ๎‰œ๎‰ต๎‰ฉ๎‰จ๎‰ฅ๎‰ง๎‰น๎‰ธ๎‰ณ๎‰Ÿ๎‰Ÿ
๎‰ญ๎‰ซ๎‰ฌ๎‰š๎‰ง๎‰จ๎‰œ๎‰ค๎‰ญ, ๎‰จ๎‰›๎‰น๎‰ก๎‰š๎‰ง๎‰จ๎€ƒ๎‰ญ๎‰›๎‰Ÿ๎‰ž๎‰ข๎‰ฌ๎‰ถ๎‰ซ๎‰น๎€ƒ๎‰œ๎€ƒ๎‰ฌ๎‰จ๎‰ฆ, ๎‰ฑ๎‰ฌ๎‰จ
๎‰ซ๎‰ญ๎‰ฆ๎‰ฆ๎‰š๎‰ช๎‰ง๎‰ต๎‰ฃ๎€ƒ๎‰œ๎‰Ÿ๎‰ซ๎€ƒ๎‰œ๎‰ซ๎‰Ÿ๎‰ฏ๎€ƒ๎‰ญ๎‰ซ๎‰ฌ๎‰š๎‰ง๎‰จ๎‰œ๎‰ฅ๎‰Ÿ๎‰ง๎‰ง๎‰ต๎‰ฏ๎€ƒ๎‰ค๎‰จ๎‰ฆ๎‰ฉ๎‰จ๎‰ง๎‰Ÿ๎‰ง๎‰ฌ๎‰จ๎‰œ
๎‰ง๎‰Ÿ๎€ƒ๎‰ฉ๎‰ช๎‰Ÿ๎‰œ๎‰ต๎‰ฒ๎‰š๎‰Ÿ๎‰ฌ 56,7 ๎‰ค๎‰ (125 ๎‰ฎ๎‰ญ๎‰ง๎‰ฌ๎‰จ๎‰œ) ๎‰ž๎‰ฅ๎‰น๎€ƒ๎‰ฆ๎‰จ๎‰ž๎‰Ÿ๎‰ฅ๎‰Ÿ๎‰ฃ
iCMPFM3 ๎‰ข iCLPFM3; 79,4 ๎‰ค๎‰ (175 ๎‰ฎ๎‰ญ๎‰ง๎‰ฌ๎‰จ๎‰œ) ๎‰ž๎‰ฅ๎‰น
๎‰ฆ๎‰จ๎‰ž๎‰Ÿ๎‰ฅ๎‰ข iCXPFM3. ๎‰‚๎‰ซ๎‰ฉ๎‰จ๎‰ฅ๎‰ถ๎‰ก๎‰จ๎‰œ๎‰š๎‰ง๎‰ข๎‰Ÿ๎€ƒ๎‰ซ๎€ƒ๎‰ญ๎‰ซ๎‰ฌ๎‰ช๎‰จ๎‰ฃ๎‰ซ๎‰ฌ๎‰œ๎‰š๎‰ฆ๎‰ข,
๎‰œ๎‰Ÿ๎‰ซ๎€ƒ๎‰ค๎‰จ๎‰ฌ๎‰จ๎‰ช๎‰ต๎‰ฏ๎€ƒ๎‰ฉ๎‰ช๎‰Ÿ๎‰œ๎‰ต๎‰ฒ๎‰š๎‰Ÿ๎‰ฌ๎€ƒ๎‰ญ๎‰ค๎‰š๎‰ก๎‰š๎‰ง๎‰ง๎‰ต๎‰ฃ๎€ƒ๎‰ฆ๎‰š๎‰ค๎‰ซ๎‰ข๎‰ฆ๎‰š๎‰ฅ๎‰ถ๎‰ง๎‰ต๎‰ฃ
๎‰œ๎‰Ÿ๎‰ซ, ๎‰ฆ๎‰จ๎‰ ๎‰Ÿ๎‰ฌ๎€ƒ๎‰ฉ๎‰ช๎‰ข๎‰œ๎‰Ÿ๎‰ซ๎‰ฌ๎‰ข๎€ƒ๎‰ค๎€ƒ๎‰ฉ๎‰จ๎‰œ๎‰ช๎‰Ÿ๎‰ ๎‰ž๎‰Ÿ๎‰ง๎‰ข๎‰ธ๎€ƒ๎‰ค๎‰ช๎‰จ๎‰ง๎‰ฒ๎‰ฌ๎‰Ÿ๎‰ฃ๎‰ง๎‰š
๎‰ข๎€ƒ๎‰ฉ๎‰ช๎‰ข๎‰ง๎‰š๎‰ž๎‰ฅ๎‰Ÿ๎‰ ๎‰ง๎‰จ๎‰ซ๎‰ฌ๎‰Ÿ๎‰ฃ๎€ƒ๎‰ข๎€ƒ๎‰ค๎€ƒ๎‰ฉ๎‰จ๎‰ฅ๎‰ญ๎‰ฑ๎‰Ÿ๎‰ง๎‰ข๎‰ธ๎€ƒ๎‰ฌ๎‰ช๎‰š๎‰œ๎‰ฆ.
๎‰‰๎‰Š๎ˆฟ๎ˆพ๎‰๎‰‰๎‰Š๎ˆฟ๎‰€๎ˆพ๎ˆฟ๎‰‡๎‰‚๎ˆฟ. ๎‰†๎‰จ๎‰ง๎‰ข๎‰ฌ๎‰จ๎‰ช๎€ƒ๎‰ฆ๎‰จ๎‰ ๎‰Ÿ๎‰ฌ๎€ƒ๎‰›๎‰ต๎‰ฌ๎‰ถ
๎‰จ๎‰ฑ๎‰Ÿ๎‰ง๎‰ถ๎€ƒ๎‰ฌ๎‰น๎‰ ๎‰Ÿ๎‰ฅ๎‰ต๎‰ฆ! ๎‰๎‰›๎‰Ÿ๎‰ž๎‰ข๎‰ฌ๎‰Ÿ๎‰ซ๎‰ถ, ๎‰ฑ๎‰ฌ๎‰จ๎€ƒ๎‰ฆ๎‰จ๎‰ง๎‰ข๎‰ฌ๎‰จ๎‰ช
๎‰ฆ๎‰จ๎‰ ๎‰Ÿ๎‰ฌ๎€ƒ๎‰›๎‰ต๎‰ฌ๎‰ถ๎€ƒ๎‰›๎‰Ÿ๎‰ก๎‰จ๎‰ฉ๎‰š๎‰ซ๎‰ง๎‰จ๎€ƒ๎‰ฉ๎‰จ๎‰ž๎‰ง๎‰น๎‰ฌ๎€ƒ๎‰ข๎€ƒ๎‰ญ๎‰ซ๎‰ฌ๎‰š๎‰ง๎‰จ๎‰œ๎‰ฅ๎‰Ÿ๎‰ง
๎‰ง๎‰š๎€ƒ๎‰ซ๎‰ฌ๎‰Ÿ๎‰ง๎‰จ๎‰œ๎‰ญ๎‰ธ๎€ƒ๎‰ฉ๎‰ฅ๎‰š๎‰ซ๎‰ฌ๎‰ข๎‰ง๎‰ญ. ๎ˆฟ๎‰ซ๎‰ฅ๎‰ข๎€ƒ๎‰ง๎‰Ÿ๎€ƒ๎‰ฉ๎‰ช๎‰ข๎‰ง๎‰น๎‰ฌ๎‰ถ
๎‰ง๎‰Ÿ๎‰จ๎‰›๎‰ฏ๎‰จ๎‰ž๎‰ข๎‰ฆ๎‰ต๎‰ฏ๎€ƒ๎‰ฆ๎‰Ÿ๎‰ช๎€ƒ๎‰ฉ๎‰ช๎‰Ÿ๎‰ž๎‰จ๎‰ซ๎‰ฌ๎‰จ๎‰ช๎‰จ๎‰ ๎‰ง๎‰จ๎‰ซ๎‰ฌ๎‰ข, ๎‰ท๎‰ฌ๎‰จ๎€ƒ๎‰ฆ๎‰จ๎‰ ๎‰Ÿ๎‰ฌ
๎‰ฉ๎‰ช๎‰ข๎‰œ๎‰Ÿ๎‰ซ๎‰ฌ๎‰ข๎€ƒ๎‰ค๎€ƒ๎‰ซ๎‰Ÿ๎‰ช๎‰ถ๎‰Ÿ๎‰ก๎‰ง๎‰ต๎‰ฆ๎€ƒ๎‰ฌ๎‰ช๎‰š๎‰œ๎‰ฆ๎‰š๎‰ฆ๎€ƒ๎‰ข๎€ƒ๎‰ฉ๎‰จ๎‰œ๎‰ช๎‰Ÿ๎‰ ๎‰ž๎‰Ÿ๎‰ง๎‰ข๎‰ธ
๎‰จ๎‰›๎‰จ๎‰ช๎‰ญ๎‰ž๎‰จ๎‰œ๎‰š๎‰ง๎‰ข๎‰น!
๎‰‰๎‰Š๎ˆฟ๎ˆพ๎‰๎‰‰๎‰Š๎ˆฟ๎‰€๎ˆพ๎ˆฟ๎‰‡๎‰‚๎ˆฟ. ๎‰‹๎‰จ๎‰Ÿ๎‰ž๎‰ข๎‰ง๎‰ข๎‰ฌ๎‰Ÿ๎‰ฅ๎‰ถ๎‰ง๎‰ต๎‰Ÿ
๎‰ค๎‰ช๎‰จ๎‰ง๎‰ฒ๎‰ฌ๎‰Ÿ๎‰ฃ๎‰ง๎‰ต๎€ƒ๎‰ž๎‰จ๎‰ฅ๎‰ ๎‰ง๎‰ต๎€ƒ๎‰›๎‰ต๎‰ฌ๎‰ถ๎€ƒ๎‰ก๎‰š๎‰ฎ๎‰ข๎‰ค๎‰ซ๎‰ข๎‰ช๎‰จ๎‰œ๎‰š๎‰ง๎‰ต
๎‰ฉ๎‰จ๎€ƒ๎‰จ๎‰›๎‰จ๎‰ข๎‰ฆ๎€ƒ๎‰ซ๎‰ฌ๎‰จ๎‰ช๎‰จ๎‰ง๎‰š๎‰ฆ๎€ƒ๎‰ซ๎‰ฌ๎‰Ÿ๎‰ง๎‰จ๎‰œ๎‰จ๎‰ฃ๎€ƒ๎‰ฉ๎‰ฅ๎‰š๎‰ซ๎‰ฌ๎‰ข๎‰ง๎‰ต!
1. ๎‰๎‰›๎‰Ÿ๎‰ž๎‰ข๎‰ฌ๎‰Ÿ๎‰ซ๎‰ถ, ๎‰ฑ๎‰ฌ๎‰จ๎€ƒ๎‰ซ๎‰จ๎‰Ÿ๎‰ž๎‰ข๎‰ง๎‰ข๎‰ฌ๎‰Ÿ๎‰ฅ๎‰ถ๎‰ง๎‰ต๎‰Ÿ๎€ƒ๎‰ค๎‰ช๎‰จ๎‰ง๎‰ฒ๎‰ฌ๎‰Ÿ๎‰ฃ๎‰ง๎‰ต
๎‰ง๎‰š๎‰ฏ๎‰จ๎‰ž๎‰น๎‰ฌ๎‰ซ๎‰น๎€ƒ๎‰ง๎‰š๎€ƒ๎‰ฉ๎‰จ๎‰ž๎‰ฉ๎‰จ๎‰ช๎‰ค๎‰Ÿ, ๎‰ฉ๎‰จ๎‰ฌ๎‰น๎‰ง๎‰ญ๎‰œ๎€ƒ๎‰ก๎‰š๎€ƒ๎‰ฎ๎‰ข๎‰ค๎‰ซ๎‰š๎‰ฌ๎‰จ๎‰ช๎‰ต.
2. ๎‰‰๎‰จ๎‰œ๎‰Ÿ๎‰ซ๎‰ถ๎‰ฌ๎‰Ÿ๎€ƒ๎‰ฆ๎‰จ๎‰ง๎‰ข๎‰ฌ๎‰จ๎‰ช๎€ƒ๎‰ซ๎€ƒ๎‰ค๎‰ช๎‰จ๎‰ง๎‰ฒ๎‰ฌ๎‰Ÿ๎‰ฃ๎‰ง๎‰š๎‰ฆ๎‰ข (B) ๎‰ง๎‰š
๎‰œ๎‰Ÿ๎‰ช๎‰ฏ๎‰ง๎‰ธ๎‰ธ๎€ƒ๎‰ฉ๎‰ฅ๎‰š๎‰ง๎‰ค๎‰ญ๎€ƒ๎‰ซ๎‰ฌ๎‰Ÿ๎‰ง๎‰จ๎‰œ๎‰จ๎‰ฃ๎€ƒ๎‰ฉ๎‰š๎‰ง๎‰Ÿ๎‰ฅ๎‰ข (A). ๎‰๎‰š๎‰ก๎‰จ๎‰ช
๎‰ž๎‰จ๎‰ฅ๎‰ ๎‰Ÿ๎‰ง๎€ƒ๎‰›๎‰ต๎‰ฌ๎‰ถ๎€ƒ๎‰ญ๎‰œ๎‰Ÿ๎‰ฅ๎‰ข๎‰ฑ๎‰Ÿ๎‰ง๎€ƒ๎‰ซ๎€ƒ๎‰ฉ๎‰จ๎‰ฆ๎‰จ๎‰ณ๎‰ถ๎‰ธ๎€ƒ๎‰ง๎‰ข๎‰ ๎‰ง๎‰Ÿ๎‰ฃ
๎‰ฑ๎‰š๎‰ซ๎‰ฌ๎‰ข๎€ƒ๎‰ซ๎‰ฌ๎‰Ÿ๎‰ง๎‰จ๎‰œ๎‰จ๎‰ฃ๎€ƒ๎‰ฉ๎‰š๎‰ง๎‰Ÿ๎‰ฅ๎‰ข.
๎‰‰๎‰Š๎‰‚๎‰†๎ˆฟ๎‰‘๎ˆบ๎‰‡๎‰‚๎ˆฟ. ๎ˆผ๎‰ซ๎‰Ÿ๎€ƒ๎‰ฉ๎‰จ๎‰ž๎‰ค๎‰ฅ๎‰ธ๎‰ฑ๎‰Ÿ๎‰ง๎‰ข๎‰น๎€ƒ๎‰ค๎‰š๎‰›๎‰Ÿ๎‰ฅ๎‰Ÿ๎‰ฃ๎€ƒ๎‰ข
๎‰ง๎‰š๎‰ซ๎‰ฌ๎‰ช๎‰จ๎‰ฃ๎‰ค๎‰ข๎€ƒ๎‰ง๎‰š๎€ƒ๎‰ก๎‰š๎‰ž๎‰ง๎‰Ÿ๎‰ฃ๎€ƒ๎‰ฉ๎‰š๎‰ง๎‰Ÿ๎‰ฅ๎‰ข
๎‰ฆ๎‰จ๎‰ง๎‰ข๎‰ฌ๎‰จ๎‰ช๎‰š๎€ƒ๎‰ž๎‰จ๎‰ฅ๎‰ ๎‰ง๎‰ต๎€ƒ๎‰œ๎‰ต๎‰ฉ๎‰จ๎‰ฅ๎‰ง๎‰น๎‰ฌ๎‰ถ๎‰ซ๎‰น
๎‰ฉ๎‰ช๎‰ข๎€ƒ๎‰ง๎‰š๎‰ฏ๎‰จ๎‰ ๎‰ž๎‰Ÿ๎‰ง๎‰ข๎‰ข๎€ƒ๎‰ฆ๎‰จ๎‰ง๎‰ข๎‰ฌ๎‰จ๎‰ช๎‰š๎€ƒ๎‰ง๎‰š
๎‰ฉ๎‰จ๎‰ž๎‰ฉ๎‰จ๎‰ช๎‰ค๎‰Ÿ.
3. ๎‰Š๎‰š๎‰ก๎‰›๎‰ฅ๎‰จ๎‰ค๎‰ข๎‰ช๎‰ญ๎‰ฃ๎‰ฌ๎‰Ÿ๎€ƒ๎‰ฉ๎‰จ๎‰ž๎‰ฉ๎‰จ๎‰ช๎‰ค๎‰ญ, ๎‰ฉ๎‰จ๎‰ฌ๎‰น๎‰ง๎‰ญ๎‰œ๎€ƒ๎‰ค๎‰ช๎‰จ๎‰ง๎‰ฒ๎‰ฌ๎‰Ÿ๎‰ฃ๎‰ง๎‰ต
๎‰œ๎‰œ๎‰Ÿ๎‰ช๎‰ฏ, ๎‰ฉ๎‰จ๎‰ค๎‰š๎€ƒ๎‰ฉ๎‰จ๎‰ž๎‰ฉ๎‰จ๎‰ช๎‰ค๎‰š๎€ƒ๎‰ง๎‰Ÿ๎€ƒ๎‰œ๎‰ซ๎‰ฌ๎‰š๎‰ง๎‰Ÿ๎‰ฌ๎€ƒ๎‰ฉ๎‰š๎‰ช๎‰š๎‰ฅ๎‰ฅ๎‰Ÿ๎‰ฅ๎‰ถ๎‰ง๎‰จ
๎‰ซ๎‰ฌ๎‰Ÿ๎‰ง๎‰Ÿ.
4. ๎‰‡๎‰š๎‰ ๎‰ฆ๎‰ข๎‰ฌ๎‰Ÿ๎€ƒ๎‰ง๎‰š๎€ƒ๎‰ค๎‰ช๎‰จ๎‰ง๎‰ฒ๎‰ฌ๎‰Ÿ๎‰ฃ๎‰ง๎‰ต๎€ƒ๎‰œ๎‰œ๎‰Ÿ๎‰ช๎‰ฏ, ๎‰ฑ๎‰ฌ๎‰จ๎‰›๎‰ต
๎‰ก๎‰š๎‰ฎ๎‰ข๎‰ค๎‰ซ๎‰ข๎‰ช๎‰จ๎‰œ๎‰š๎‰ฌ๎‰ถ๎€ƒ๎‰ฆ๎‰จ๎‰ง๎‰ข๎‰ฌ๎‰จ๎‰ช๎€ƒ๎‰ฉ๎‰š๎‰ช๎‰š๎‰ฅ๎‰ฅ๎‰Ÿ๎‰ฅ๎‰ถ๎‰ง๎‰จ๎€ƒ๎‰ซ๎‰ฌ๎‰Ÿ๎‰ง๎‰Ÿ.
5. ๎‰‰๎‰จ๎‰ซ๎‰ฅ๎‰Ÿ๎€ƒ๎‰ก๎‰š๎‰œ๎‰Ÿ๎‰ช๎‰ฒ๎‰Ÿ๎‰ง๎‰ข๎‰น๎€ƒ๎‰ญ๎‰ซ๎‰ฌ๎‰š๎‰ง๎‰จ๎‰œ๎‰ค๎‰ข๎€ƒ๎‰ค๎‰ช๎‰Ÿ๎‰ฉ๎‰Ÿ๎‰ ๎‰ง๎‰ต๎‰Ÿ๎€ƒ๎‰ฅ๎‰Ÿ๎‰ง๎‰ฌ๎‰ต
๎‰ฆ๎‰จ๎‰ ๎‰ง๎‰จ๎€ƒ๎‰ช๎‰š๎‰ก๎‰ฆ๎‰Ÿ๎‰ซ๎‰ฌ๎‰ข๎‰ฌ๎‰ถ๎€ƒ๎‰ก๎‰š๎€ƒ๎‰ฆ๎‰จ๎‰ง๎‰ข๎‰ฌ๎‰จ๎‰ช๎‰จ๎‰ฆ๎€ƒ๎‰ง๎‰š๎€ƒ๎‰ฉ๎‰ช๎‰จ๎‰ช๎‰Ÿ๎‰ก๎‰ข
๎‰ซ๎‰จ๎‰Ÿ๎‰ž๎‰ข๎‰ง๎‰ข๎‰ฌ๎‰Ÿ๎‰ฅ๎‰ถ๎‰ง๎‰ต๎‰ฏ๎€ƒ๎‰ค๎‰ช๎‰จ๎‰ง๎‰ฒ๎‰ฌ๎‰Ÿ๎‰ฃ๎‰ง๎‰จ๎‰œ (B), ๎‰ฑ๎‰ฌ๎‰จ๎‰›๎‰ต๎€ƒ๎‰จ๎‰ง๎‰ข
๎‰›๎‰ต๎‰ฅ๎‰ข๎€ƒ๎‰ง๎‰Ÿ๎€ƒ๎‰œ๎‰ข๎‰ž๎‰ง๎‰ต๎€ƒ๎‰ฉ๎‰ช๎‰ข๎€ƒ๎‰ฉ๎‰ช๎‰จ๎‰ซ๎‰ฆ๎‰จ๎‰ฌ๎‰ช๎‰Ÿ.
6. (๎‰‡๎‰Ÿ๎‰จ๎‰›๎‰น๎‰ก๎‰š๎‰ฌ๎‰Ÿ๎‰ฅ๎‰ถ๎‰ง๎‰ต๎‰ฃ๎€ƒ๎‰ฒ๎‰š๎‰) ๎‰‰๎‰ช๎‰จ๎‰ฉ๎‰ญ๎‰ซ๎‰ฌ๎‰ข๎‰ฌ๎‰Ÿ๎€ƒ๎‰›๎‰ฅ๎‰จ๎‰ค๎‰ข๎‰ช๎‰š๎‰ฌ๎‰จ๎‰ช
๎‰ข๎‰ฅ๎‰ข๎€ƒ๎‰ฌ๎‰ช๎‰จ๎‰ซ๎€ƒ๎‰ก๎‰š๎‰ฆ๎‰ค๎‰š (๎‰ง๎‰Ÿ๎€ƒ๎‰œ๎‰ฏ๎‰จ๎‰ž๎‰น๎‰ฌ๎€ƒ๎‰œ๎€ƒ๎‰ค๎‰จ๎‰ฆ๎‰ฉ๎‰ฅ๎‰Ÿ๎‰ค๎‰ฌ) ๎‰ฑ๎‰Ÿ๎‰ช๎‰Ÿ๎‰ก
๎‰ง๎‰ข๎‰ ๎‰ง๎‰ข๎‰Ÿ๎€ƒ๎‰จ๎‰ฌ๎‰œ๎‰Ÿ๎‰ช๎‰ซ๎‰ฌ๎‰ข๎‰น๎€ƒ๎‰ค๎‰ช๎‰จ๎‰ง๎‰ฒ๎‰ฌ๎‰Ÿ๎‰ฃ๎‰ง๎‰š๎€ƒ๎‰ž๎‰ฅ๎‰น
๎‰ž๎‰จ๎‰ฉ๎‰จ๎‰ฅ๎‰ง๎‰ข๎‰ฌ๎‰Ÿ๎‰ฅ๎‰ถ๎‰ง๎‰จ๎‰ฃ๎€ƒ๎‰ก๎‰š๎‰ณ๎‰ข๎‰ฌ๎‰ต๎€ƒ๎‰ฆ๎‰จ๎‰ง๎‰ข๎‰ฌ๎‰จ๎‰ช๎‰š.
๎€‹๎‰œ๎‰ข๎‰ž๎€ƒ๎‰ซ๎‰ฅ๎‰Ÿ๎‰œ๎‰š)
๎‰ฉ๎‰จ๎‰ž๎‰ฉ๎‰จ๎‰ช๎‰ค๎‰š
1
2
๎‰ฉ๎‰จ๎‰ž๎‰ฉ๎‰จ๎‰ช๎‰ค๎‰š
๎‰ฉ๎‰จ๎‰ฅ๎‰จ๎‰ ๎‰Ÿ๎‰ง๎‰ข๎‰Ÿ
4
3
๎‰ซ๎‰จ๎‰Ÿ๎‰ž๎‰ข๎‰ง๎‰ข๎‰ฌ๎‰Ÿ๎‰ฅ๎‰ถ๎‰ง๎‰ต๎‰Ÿ
6
๎‰ค๎‰ช๎‰จ๎‰ง๎‰ฒ๎‰ฌ๎‰Ÿ๎‰ฃ๎‰ง๎‰ต
๎‰ž๎‰จ๎‰ฅ๎‰ ๎‰ง๎‰ต๎€ƒ๎‰›๎‰ต๎‰ฌ๎‰ถ
๎‰ก๎‰š๎‰ฎ๎‰ข๎‰ค๎‰ซ๎‰ข๎‰ช๎‰จ๎‰œ๎‰š๎‰ง๎‰ต
๎‰ฉ๎‰จ๎€ƒ๎‰จ๎‰›๎‰จ๎‰ข๎‰ฆ๎€ƒ๎‰ซ๎‰ฌ๎‰จ๎‰ช๎‰จ๎‰ง๎‰š๎‰ฆ
๎‰ฐ๎‰Ÿ๎‰ง๎‰ฌ๎‰ช๎‰š๎‰ฅ๎‰ถ๎‰ง๎‰จ๎‰๎‰จ๎€ƒ๎‰œ๎‰ต๎‰ซ๎‰ฌ๎‰ญ๎‰ฉ๎‰š
๎‰ซ๎‰ฌ๎‰Ÿ๎‰ง๎‰จ๎‰œ๎‰จ๎‰ฃ๎€ƒ๎‰ฉ๎‰ฅ๎‰š๎‰ซ๎‰ฌ๎‰ข๎‰ง๎‰ต
๎‰œ๎‰ต๎‰ž๎‰œ๎‰ข๎‰ง๎‰ญ๎‰ฌ๎‰š
๎‰ซ๎‰ฌ๎‰Ÿ๎‰ง๎‰Ÿ
๎‰ฎ๎‰ข๎‰ค๎‰ซ๎‰š๎‰ฐ๎‰ข๎‰ข
๎‰ฉ๎‰š๎‰ช๎‰š๎‰ฅ๎‰ฅ๎‰Ÿ๎‰ฅ๎‰ถ๎‰ง๎‰š
๎‰ฐ๎‰Ÿ๎‰ง๎‰ฌ๎‰ช๎‰š๎‰ฅ๎‰ถ๎‰ง๎‰ต๎‰ฃ๎€ƒ๎‰œ๎‰ต๎‰ซ๎‰ฌ๎‰ญ๎‰ฉ
5
๎ˆˆ๎„ฐ๎ˆš๎ˆก๎ˆ iC-PFM3 ๎ˆ…๎„ฏ๎ˆ˜๎ˆ–๎ˆ“๎„ฐ๎ˆข๎€ƒ๎„ฐ๎ˆ–๎ˆ›๎„ฎ๎„ฒ๎ˆ๎„ฑ๎„ฒ๎„ฎ๎„ฑ๎ˆ˜๎ˆข
60
๎‡ผ๎„ซ๎ˆ€๎‡น๎ˆ‰๎‡น๎ˆˆ๎ˆ‰๎‡พ๎ˆˆ๎ˆ‰๎‡ผ๎€ƒ๎ˆ‰๎‡พ๎ˆƒ๎€ƒ๎ˆ†๎ˆ๎‡น๎ˆ€๎‡น๎€ƒ๎ˆ‰๎ˆ…๎‡ฟ๎ˆ‹๎ˆ…๎ˆŠ
๎ˆˆ๎ˆ‰๎ˆ…๎ˆƒ๎€ƒ๎ˆ‰๎ˆ…๎‡ฟ๎ˆ‹๎ˆ… - ๎ˆ„๎ˆŠ๎ˆ๎‡ฟ๎ˆƒ๎ˆ…๎‡ฟ๎€ƒ๎ˆ…๎ˆ‡๎„ฌ๎ˆ…๎ˆˆ๎ˆ‰๎‡น๎ˆ‰๎‡ผ๎ˆˆ
๎ˆ†๎ˆ‡๎ˆ…๎‡ผ๎‡ฟ๎‡ป๎ˆ…๎ˆ†๎ˆ…๎‡ฟ๎‡พ๎ˆˆ๎‡พ: ๎‡น๎ˆž๎€ƒ๎„ฏ๎„ฐ๎ˆž๎€ƒ๎„ฐ๎ˆŸ๎„ฎ๎„ฑ๎„ณ๎„ฎ๎ˆœ๎ˆ“๎„ฑ๎„ฐ๎„ฒ๎„ฐ๎€ƒ๎„ฐ๎ŠŒ๎„ฎ๎ˆก๎ˆ›๎ˆ’
๎„ฏ๎ˆ ๎ˆ๎ˆš๎ˆ›๎ˆ’๎€ƒ๎„ฎ๎ˆž๎„ฒ๎ˆ ๎ˆค๎ˆ’๎€ƒ๎ˆ–๎ˆš๎„ฎ๎€ƒ๎„ฎ๎ˆฃ๎„ฒ๎ˆฉ๎€ƒ๎„ฒ๎ˆ ๎€ƒ๎„ฑ๎„ฒ๎ˆ ๎ˆš๎ˆค๎„ฐ๎ˆ“๎ˆ ๎€ƒ๎ˆฃ๎ŠŒ๎ˆ๎ˆก๎ˆค๎„ฐ๎ˆš๎€ƒ๎ˆ›๎ˆ“๎ˆž๎„ฏ๎ˆฃ๎ˆž๎ˆ ๎ˆข
๎ŠŒ๎ˆก๎ˆฉ๎ˆ›๎ˆœ๎ˆ˜๎„ฑ๎ˆ˜๎ˆข๎€ƒ๎„ฑ๎ˆ ๎ˆ•๎„ฎ๎ˆก๎ˆ ๎ˆช๎€ƒ๎„ฒ๎ˆก๎„ฎ๎ˆฃ๎ˆ๎„ฎ๎„ฒ๎ˆš๎„ฑ๎ˆ๎ˆ ๎ˆช๎€ƒ๎ˆ’๎€ƒ๎ˆ•๎ˆœ๎ˆ๎ˆ•๎ˆ˜๎ˆข๎€ƒ๎„ฑ๎„ฒ๎ˆ ๎ˆž
๎„ฐ๎ˆŸ๎ˆ ๎ŠŒ๎ˆœ๎ˆš๎„ฑ๎ˆ๎ˆฉ! ๎‡น๎ŠŒ๎ˆ ๎„ฒ๎„ฐ๎ˆœ๎„ฐ๎ˆ“๎€ƒ๎„ฐ๎ˆฃ๎ˆ™๎ˆช๎ˆž๎ˆ˜๎€ƒ๎„ฒ๎ˆ ๎ˆฃ๎€ƒ๎ˆฃ๎ŠŒ๎„ฐ๎ˆช๎ˆ™๎ˆฃ๎ˆž๎ˆ ๎ˆฃ
๎„ฐ๎ˆ–๎ˆ›๎„ฎ๎„ฒ๎ˆ๎„ฑ๎„ฒ๎„ฎ๎„ฑ๎ˆ˜๎ˆข๎€ƒ๎ˆž๎„ฎ๎€ƒ๎ˆ•๎„ฐ๎ˆ•๎„ฎ๎ˆš๎ˆซ๎„ฑ๎„ฐ๎ˆš๎€ƒ๎ˆฉ๎„ฒ๎ˆš๎€ƒ๎ˆ˜๎€ƒ๎„ฏ๎ˆ ๎ˆ๎ˆ’๎€ƒ๎„ฑ๎„ฒ๎ˆ˜๎ˆž๎€ƒ๎ˆ ๎ŠŒ๎ˆ ๎ˆ“๎„ฎ
๎ŠŒ๎ˆก๎ˆ ๎„ฑ๎„ฎ๎ˆก๎„ฒ๎ˆ๎„ฒ๎„ฎ๎ˆš๎€ƒ๎„ฎ๎ˆฃ๎„ฒ๎ˆฉ๎€ƒ๎„ฒ๎ˆ ๎€ƒ๎„ฑ๎„ฒ๎ˆ ๎ˆš๎ˆค๎„ฐ๎ˆ“๎ˆ ๎€ƒ๎ˆ๎ŠŒ๎ˆ ๎ˆก๎„ฐ๎ˆ“๎€ƒ๎ˆž๎„ฎ๎€ƒ๎„ฑ๎„ฒ๎ˆ˜๎ˆก๎ˆ“๎ˆŸ๎„ฐ๎ˆš๎€ƒ๎„ฒ๎ˆ 
๎ŠŒ๎„ฐ๎ˆž๎„ฒ๎„ฎ๎ŠŒ๎ˆœ๎ˆ๎„ฑ๎ˆš๎ˆ ๎€ƒ๎„ฒ๎ˆ ๎ˆฃ๎€ƒ๎„ฑ๎ˆฃ๎ˆž๎„ฏ๎ˆฃ๎„ฎ๎„ฑ๎ˆ๎ˆ‘๎ˆž๎ˆ ๎ˆฃ๎€ƒ๎ˆ•๎ˆ๎ˆก๎ˆ ๎ˆฃ๎ˆข๎€ƒ๎ˆฉ๎ˆœ๎ˆ ๎ˆฃ๎€ƒ๎„ฒ๎ˆ ๎ˆฃ
๎„ฐ๎ˆŸ๎ˆ ๎ŠŒ๎ˆœ๎ˆš๎„ฑ๎ˆ๎ˆ ๎ˆช. ๎‡ผ๎ˆž๎ˆš๎„ฑ๎ˆค๎ˆช๎„ฑ๎„ฒ๎„ฐ๎€ƒ๎„ฒ๎ˆ˜๎€ƒ๎„ฏ๎ˆ ๎ˆ๎ˆ’๎€ƒ๎ˆฉ๎ŠŒ๎ˆฆ๎ˆข๎€ƒ๎„ฎ๎ŠŒ๎„ฎ๎ˆš๎„ฒ๎„ฐ๎ˆ“๎„ฒ๎„ฎ๎ˆš๎€ƒ๎ŠŒ๎ˆก๎ˆš๎ˆž
๎ˆž๎„ฎ๎€ƒ๎„ฐ๎ˆ–๎ˆ›๎„ฎ๎„ฒ๎„ฎ๎„ฑ๎„ฒ๎ˆ’๎„ฑ๎„ฐ๎„ฒ๎„ฐ๎€ƒ๎„ฒ๎ˆ ๎€ƒ๎„ฑ๎„ฒ๎ˆ ๎ˆš๎ˆค๎„ฐ๎ˆ“๎ˆ . ๎ˆ…๎€ƒ๎„ฒ๎ˆ ๎ˆ“๎ˆค๎ˆ ๎ˆข๎€ƒ๎„ฑ๎„ฒ๎ˆ ๎ˆž๎€ƒ๎ˆ ๎ŠŒ๎ˆ ๎ˆ“๎ˆ 
๎ŠŒ๎ˆก๎ˆ ๎„ฑ๎„ฎ๎ˆก๎„ฒ๎ˆ๎„ฒ๎„ฎ๎ˆš๎€ƒ๎ˆ˜๎€ƒ๎ˆ•๎ˆ๎„ฑ๎ˆ˜๎€ƒ๎ŠŒ๎ˆก๎ˆ‘๎ŠŒ๎„ฐ๎ˆš๎€ƒ๎ˆž๎„ฎ๎€ƒ๎ˆ‘๎ˆค๎„ฐ๎ˆš๎€ƒ๎ˆ๎ˆ‘๎ˆ–๎ˆš๎„ฑ๎„ฒ๎ˆ ๎€ƒ๎ŠŒ๎ˆ๎ˆค๎ˆ ๎ˆข
๎ˆ–๎ˆฃ๎ˆฅ๎ˆ ๎„ฑ๎„ฎ๎ˆž๎ˆ“๎„ฏ๎„ฎ๎ˆข 5/8" (1,6 cm).
1. ๎‡น๎ˆž๎ˆ ๎ˆ“๎ˆŸ๎„ฒ๎„ฐ๎€ƒ๎„ฒ๎ˆ˜๎ˆž๎€ƒ๎ŠŒ๎ˆœ๎ˆ๎ˆ›๎„ฎ๎€ƒ๎„ฒ๎ˆ ๎ˆ“๎ˆค๎ˆ ๎ˆฃ (๎‡น) ๎ˆ–๎ˆš๎„ฎ๎€ƒ๎ˆž๎„ฎ๎€ƒ๎„ฒ๎ˆ˜๎ˆž๎€ƒ๎ŠŒ๎ˆก๎ˆ ๎„ฐ๎„ฒ๎ˆ ๎ˆš๎ˆ๎ˆ๎„ฑ๎„ฐ๎„ฒ๎„ฐ
๎ˆ–๎ˆš๎„ฎ๎€ƒ๎„ฒ๎ˆ ๎ŠŒ๎ˆ ๎ˆ™๎ˆ‘๎„ฒ๎ˆ˜๎„ฑ๎ˆ˜๎€ƒ๎„ฑ๎„ฒ๎ˆ ๎ˆž๎€ƒ๎„ฒ๎ˆ ๎ˆ“๎ˆค๎ˆ .
2. ๎‡น๎ˆœ๎„ณ๎„ฎ๎„ฏ๎ˆš๎ˆ๎„ฑ๎„ฒ๎„ฐ๎€ƒ๎„ฒ๎ˆ˜๎ˆž๎€ƒ๎ŠŒ๎ˆœ๎ˆ๎ˆ›๎„ฎ๎€ƒ๎„ฒ๎ˆ ๎ˆ“๎ˆค๎ˆ ๎ˆฃ (๎‡น) ๎ˆ›๎„ฎ๎ˆš๎€ƒ๎„ฑ๎ˆ˜๎ˆ๎„ฐ๎ˆš๎ˆซ๎„ฑ๎„ฒ๎„ฐ๎€ƒ๎„ฒ๎ˆš๎ˆข
๎ˆ™๎ˆ‘๎„ฑ๎„ฐ๎ˆš๎ˆข๎€ƒ๎ˆ–๎ˆš๎„ฎ๎€ƒ๎„ฒ๎ˆš๎ˆข๎€ƒ๎ˆ ๎ŠŒ๎ˆ‘๎ˆข๎€ƒ๎ˆ ๎„ฏ๎ˆ˜๎ˆ–๎ˆ ๎ˆช๎ˆข.
๎ˆˆ๎‡พ๎ˆ‚๎‡ผ๎‡ฟ๎ˆ๎ˆˆ๎‡พ: ๎ˆ‰๎ˆ  iCMPFM3 ๎ŠŒ๎ˆก๎ˆ‘๎ŠŒ๎„ฐ๎ˆš๎€ƒ๎ˆž๎„ฎ๎€ƒ๎„ฐ๎ˆ–๎ˆ›๎„ฎ๎„ฒ๎„ฎ๎„ฑ๎„ฒ๎„ฎ๎ˆ™๎„ฐ๎ˆ“๎€ƒ๎„ฑ๎„ฐ๎€ƒ๎„ฏ๎ˆช๎ˆ 
๎ˆ ๎ˆก๎ˆ™๎ˆ ๎„ฑ๎„ฒ๎ˆ๎„ฒ๎„ฐ๎ˆข 40.6 cm (16โ€). ๎ˆ‰๎ˆ  iCLPFM3
๎ˆ๎ŠŒ๎ˆ ๎ˆก๎„ฐ๎ˆ“๎€ƒ๎ˆž๎„ฎ๎€ƒ๎„ฐ๎ˆ–๎ˆ›๎„ฎ๎„ฒ๎„ฎ๎„ฑ๎„ฒ๎„ฎ๎ˆ™๎„ฐ๎ˆ“๎€ƒ๎„ฑ๎„ฐ๎€ƒ๎ˆ ๎ˆก๎ˆ™๎ˆ ๎„ฑ๎„ฒ๎ˆ๎„ฒ๎„ฐ๎ˆข
40.6 cm (16โ€) (๎„ฐ๎„ฑ๎ˆฆ๎„ฒ๎„ฐ๎ˆก๎ˆš๎ˆ›๎ˆ‘๎ˆข๎€ƒ๎ˆ ๎ŠŒ๎ˆ‘๎ˆข) ๎ˆ’
๎ˆ ๎ˆก๎ˆ™๎ˆ ๎„ฑ๎„ฒ๎ˆ๎„ฒ๎„ฐ๎ˆข 61.0 cm (24โ€) (๎„ฐ๎ˆŸ๎ˆฆ๎„ฒ๎„ฐ๎ˆก๎ˆš๎ˆ›๎ˆ‘๎ˆข๎€ƒ๎ˆ ๎ŠŒ๎ˆ‘๎ˆข).
๎„ซ๎ˆš๎„ฎ๎€ƒ๎„ฒ๎ˆ  iCXPFM3, ๎ˆ๎ŠŒ๎ˆ ๎ˆก๎„ฐ๎ˆ“๎€ƒ๎ˆž๎„ฎ๎€ƒ๎„ฒ๎ˆ ๎ŠŒ๎ˆ ๎ˆ™๎„ฐ๎„ฒ๎ˆ˜๎ˆ™๎„ฐ๎ˆ“๎€ƒ๎„ฑ๎„ฐ
๎„ฏ๎ˆช๎ˆ ๎€ƒ๎ˆ’๎€ƒ๎„ฒ๎ˆก๎„ฐ๎ˆš๎ˆข๎€ƒ๎ˆ ๎ˆก๎ˆ™๎ˆ ๎„ฑ๎„ฒ๎ˆ๎„ฒ๎„ฐ๎ˆข 40.6 cm (16โ€) ๎ˆ’๎€ƒ๎„ฑ๎„ฐ
๎„ฏ๎ˆช๎ˆ ๎€ƒ๎ˆ ๎ˆก๎ˆ™๎ˆ ๎„ฑ๎„ฒ๎ˆ๎„ฒ๎„ฐ๎ˆข 61.0 cm (24โ€). ๎ˆˆ๎„ฒ๎ˆ˜๎ˆž
๎ŠŒ๎„ฐ๎ˆก๎ˆ“๎ŠŒ๎„ฒ๎ˆฆ๎„ฑ๎ˆ˜๎€ƒ๎„ฒ๎ˆ ๎ŠŒ๎ˆ ๎ˆ™๎ˆ‘๎„ฒ๎ˆ˜๎„ฑ๎ˆ˜๎ˆข๎€ƒ๎„ฑ๎„ฐ๎€ƒ๎„ฒ๎ˆก๎„ฐ๎ˆš๎ˆข
๎ˆ ๎ˆก๎ˆ™๎ˆ ๎„ฑ๎„ฒ๎ˆ๎„ฒ๎„ฐ๎ˆข 40.6 cm (16โ€), ๎ŠŒ๎ˆก๎ˆ‘๎ŠŒ๎„ฐ๎ˆš๎€ƒ๎ˆž๎„ฎ
๎„ฒ๎ˆ ๎ŠŒ๎ˆ ๎ˆ™๎„ฐ๎„ฒ๎ˆ˜๎ˆ™๎„ฐ๎ˆ“๎€ƒ๎ˆ›๎„ฎ๎ˆš๎€ƒ๎„ฑ๎„ฒ๎ˆ ๎ˆฃ๎ˆข๎€ƒ๎„ฒ๎ˆก๎„ฐ๎ˆš๎ˆข๎€ƒ๎ˆ ๎ˆก๎ˆ™๎ˆ ๎„ฑ๎„ฒ๎ˆ๎„ฒ๎„ฐ๎ˆข
๎ˆค๎ˆก๎ˆ˜๎„ฑ๎ˆš๎ˆ๎ˆ ๎ŠŒ๎ˆ ๎ˆš๎ˆซ๎ˆž๎„ฒ๎„ฎ๎ˆข๎€ƒ๎„ฒ๎ˆš๎ˆข๎€ƒ๎„ฐ๎ˆŸ๎ˆฆ๎„ฒ๎„ฐ๎ˆก๎ˆš๎ˆ›๎ˆ‘๎ˆข๎€ƒ๎ˆ›๎„ฎ๎ˆš
๎ˆ›๎„ฐ๎ˆž๎„ฒ๎ˆก๎ˆš๎ˆ›๎ˆ‘๎ˆข๎€ƒ๎ˆ ๎ŠŒ๎ˆ‘๎ˆข.
๎ˆˆ๎‡พ๎ˆ‚๎‡ผ๎‡ฟ๎ˆ๎ˆˆ๎‡พ: ๎ˆ‰๎ˆ ๎€ƒ๎ˆ›๎„ฎ๎„ฒ๎„ฎ๎ˆ›๎ˆฉ๎ˆก๎ˆฃ๎„ณ๎ˆ ๎€ƒ๎ˆ›๎ˆ‘๎ˆž๎„ฒ๎ˆก๎ˆ ๎€ƒ๎„ฒ๎ˆ˜๎ˆข๎€ƒ๎ˆ ๎ˆ™๎ˆฉ๎ˆž๎ˆ˜๎ˆข๎€ƒ๎ˆ™๎„ฎ๎€ƒ๎„ฐ๎ˆ“๎ˆž๎„ฎ๎ˆš
๎„ฐ๎ˆฃ๎ˆ™๎ˆฃ๎ˆ–๎ˆก๎„ฎ๎ˆ๎ˆ๎ˆš๎„ฑ๎ˆ๎ˆ‘๎ˆž๎ˆ ๎€ƒ๎ˆ๎„ฐ๎€ƒ๎„ฒ๎ˆ˜๎ˆž๎€ƒ๎ˆ›๎„ฐ๎ˆž๎„ฒ๎ˆก๎ˆš๎ˆ›๎ˆ’๎€ƒ๎ˆ–๎ˆก๎„ฎ๎ˆ๎ˆ๎ˆ’
๎ŠŒ๎ˆ๎ˆž๎ˆฆ๎€ƒ๎„ฑ๎„ฒ๎ˆš๎ˆข๎€ƒ๎„ฐ๎„ฒ๎ˆš๎ˆ›๎ˆ‘๎„ฒ๎„ฐ๎ˆข๎€ƒ๎ŠŒ๎ˆ ๎ˆฃ๎€ƒ๎ˆ•๎ˆก๎ˆ“๎„ฑ๎ˆ›๎ˆ ๎ˆž๎„ฒ๎„ฎ๎ˆš๎€ƒ๎„ฎ๎ˆ›๎ˆก๎ˆš๎ˆ•๎ˆซ๎ˆข
๎ˆ›๎ˆ๎„ฒ๎ˆฆ๎€ƒ๎„ฎ๎ŠŒ๎ˆฉ๎€ƒ๎ˆ›๎ˆ๎ˆ™๎„ฐ๎€ƒ๎ˆ๎ˆก๎ˆ™๎ˆก๎ˆฆ๎„ฑ๎ˆ˜. ๎ˆ๎ˆ๎ˆ•๎„ฐ๎„ฒ๎„ฐ๎€ƒ๎„ฒ๎ˆ ๎€ƒ๎ˆฃ๎ŠŒ๎ˆฉ๎ˆฅ๎ˆ˜
๎„ฑ๎„ฎ๎ˆข๎€ƒ๎ˆ›๎„ฎ๎„ฒ๎ˆ๎€ƒ๎„ฒ๎ˆ ๎ˆž๎€ƒ๎ˆ›๎„ฎ๎ˆ™๎ˆ ๎ˆก๎ˆš๎„ฑ๎ˆ๎ˆฉ๎€ƒ๎„ฒ๎ˆ˜๎ˆข๎€ƒ๎ˆ™๎ˆ‘๎„ฑ๎ˆ˜๎ˆข๎€ƒ๎„ฑ๎„ฒ๎ˆ’๎ˆก๎ˆš๎ˆŸ๎ˆ˜๎ˆข.
3. ๎‡น๎ˆž๎ˆ ๎ˆ“๎ˆŸ๎„ฒ๎„ฐ๎€ƒ๎ˆ ๎ŠŒ๎ˆ‘๎ˆข๎€ƒ๎ˆ ๎„ฏ๎ˆ˜๎ˆ–๎ˆ ๎ˆช๎ˆข๎€ƒ๎„ฏ๎ˆš๎„ฎ๎ˆ๎ˆ‘๎„ฒ๎ˆก๎ˆ ๎ˆฃ 7/32" (5,5 mm) ๎„ฑ๎„ฒ๎ˆ ๎ˆฃ๎ˆข
๎ˆŸ๎ˆช๎ˆœ๎ˆš๎ˆž๎ˆ ๎ˆฃ๎ˆข๎€ƒ๎ˆ ๎ˆก๎ˆ™๎ˆ ๎„ฑ๎„ฒ๎ˆ๎„ฒ๎„ฐ๎ˆข.
4. ๎ˆ‹๎ˆก๎ˆ˜๎„ฑ๎ˆš๎ˆ๎ˆ ๎ŠŒ๎ˆ ๎ˆš๎ˆซ๎ˆž๎„ฒ๎„ฎ๎ˆข๎€ƒ๎ˆ›๎ˆœ๎„ฐ๎ˆš๎„ฏ๎ˆ“ 1/2" (12,7 mm), ๎„ฐ๎ˆ–๎ˆ›๎„ฎ๎„ฒ๎„ฎ๎„ฑ๎„ฒ๎ˆ’๎„ฑ๎„ฒ๎„ฐ
๎„ฒ๎ˆš๎ˆข๎€ƒ๎ˆ•๎ˆ“๎„ฏ๎„ฐ๎ˆข (C) ๎ˆ๎ˆ‘๎„ฑ๎ˆฆ๎€ƒ๎„ฒ๎ˆฆ๎ˆž๎€ƒ๎„ฐ๎ŠŒ๎ˆ“๎ŠŒ๎„ฐ๎„ฏ๎ˆฆ๎ˆž๎€ƒ๎„ฏ๎„ฎ๎ˆ›๎„ฒ๎ˆฃ๎ˆœ๎ˆ“๎ˆฆ๎ˆž (D) ๎ˆ›๎„ฎ๎ˆš๎€ƒ๎„ฒ๎ˆ˜๎ˆข
๎ŠŒ๎ˆœ๎ˆ๎ˆ›๎„ฎ๎ˆข๎€ƒ๎„ฒ๎ˆ ๎ˆ“๎ˆค๎ˆ ๎ˆฃ (๎‡น) ๎„ฑ๎„ฒ๎ˆ ๎ˆฃ๎ˆข๎€ƒ๎ˆŸ๎ˆช๎ˆœ๎ˆš๎ˆž๎ˆ ๎ˆฃ๎ˆข๎€ƒ๎ˆ ๎ˆก๎ˆ™๎ˆ ๎„ฑ๎„ฒ๎ˆ๎„ฒ๎„ฐ๎ˆข.
1
1/2" (12,7 mm)
(A)
2
4
1
CENTER
LINE
๎€‹๎‡น๎ŠŒ๎„ฐ๎ˆš๎ˆ›๎ˆ ๎ˆž๎ˆ“๎ˆ—๎„ฐ๎„ฒ๎„ฎ๎ˆš๎€ƒ๎„ฒ๎ˆ  iCMPFM)
3
x 4 ๎ˆ’ 6
(C) x 4 ๎ˆ’ 6
(D) x 4 ๎ˆ’ 6
x 4 ๎ˆ’ 6
2 x 24"
2 x 16"
(iCXPFM3)
3 x 16"
๎ˆ…๎„ฏ๎ˆ˜๎ˆ–๎ˆ“๎„ฐ๎ˆข๎€ƒ๎„ฐ๎ˆ–๎ˆ›๎„ฎ๎„ฒ๎ˆ๎„ฑ๎„ฒ๎„ฎ๎„ฑ๎ˆ˜๎ˆข ๎ˆˆ๎„ฐ๎ˆš๎ˆก๎ˆ iC-PFM3
61
๎‡ผ๎„ซ๎ˆ€๎‡น๎ˆ‰๎‡น๎ˆˆ๎ˆ‰๎‡พ๎ˆˆ๎ˆ‰๎‡ผ๎€ƒ๎ˆ‰๎‡พ๎ˆƒ๎€ƒ๎ˆ†๎ˆ๎‡น๎ˆ€๎‡น๎€ƒ๎ˆ‰๎ˆ…๎‡ฟ๎ˆ‹๎ˆ…๎ˆŠ๎€ƒ๎ˆˆ๎ˆ‰๎ˆ…๎ˆƒ๎€ƒ๎ˆ‰๎ˆ…๎‡ฟ๎ˆ‹๎ˆ…-
๎ˆˆ๎ˆ€๎ˆŠ๎ˆ‡๎ˆ…๎‡ป๎‡ผ๎ˆ‚๎‡น, ๎ˆ‰๎ˆˆ๎‡ฟ๎ˆ‚๎‡ผ๎ˆƒ๎ˆ‰๎ˆ…๎ˆ๎‡ฟ๎„ฌ๎ˆ…๎‡ฟ๎€ƒ๎‡ณ๎€ƒ๎ˆ‰๎ˆ…๎ˆŠ๎‡บ๎ˆ๎‡น
๎ˆ†๎ˆ‡๎ˆ…๎‡ผ๎‡ฟ๎‡ป๎ˆ…๎ˆ†๎ˆ…๎‡ฟ๎‡พ๎ˆˆ๎‡พ: ๎‡น๎ˆž๎€ƒ๎„ฏ๎„ฐ๎ˆž๎€ƒ๎„ฐ๎ˆŸ๎„ฎ๎„ฑ๎„ณ๎„ฎ๎ˆœ๎ˆ“๎„ฑ๎„ฐ๎„ฒ๎„ฐ๎€ƒ๎„ฐ๎ŠŒ๎„ฎ๎ˆก๎ˆ›๎ˆ’
๎„ฏ๎ˆ ๎ˆ๎ˆš๎ˆ›๎ˆ’๎€ƒ๎„ฎ๎ˆž๎„ฒ๎ˆ ๎ˆค๎ˆ’๎€ƒ๎ˆ–๎ˆš๎„ฎ๎€ƒ๎„ฎ๎ˆฃ๎„ฒ๎ˆฉ๎€ƒ๎„ฒ๎ˆ ๎€ƒ๎„ฑ๎„ฒ๎ˆ ๎ˆš๎ˆค๎„ฐ๎ˆ“๎ˆ ๎€ƒ๎ˆฃ๎ŠŒ๎ˆ๎ˆก๎ˆค๎„ฐ๎ˆš๎€ƒ๎ˆ›๎ˆ“๎ˆž๎„ฏ๎ˆฃ๎ˆž๎ˆ ๎ˆข
๎ŠŒ๎ˆก๎ˆฉ๎ˆ›๎ˆœ๎ˆ˜๎„ฑ๎ˆ˜๎ˆข๎€ƒ๎„ฑ๎ˆ ๎ˆ•๎„ฎ๎ˆก๎ˆ ๎ˆช๎€ƒ๎„ฒ๎ˆก๎„ฎ๎ˆฃ๎ˆ๎„ฎ๎„ฒ๎ˆš๎„ฑ๎ˆ๎ˆ ๎ˆช๎€ƒ๎ˆ’๎€ƒ๎ˆ•๎ˆœ๎ˆ๎ˆ•๎ˆ˜๎ˆข๎€ƒ๎„ฑ๎„ฒ๎ˆ ๎ˆž
๎„ฐ๎ˆŸ๎ˆ ๎ŠŒ๎ˆœ๎ˆš๎„ฑ๎ˆ๎ˆฉ! ๎‡น๎ŠŒ๎ˆ ๎„ฒ๎„ฐ๎ˆœ๎„ฐ๎ˆ“๎€ƒ๎„ฐ๎ˆฃ๎ˆ™๎ˆช๎ˆž๎ˆ˜๎€ƒ๎„ฒ๎ˆ ๎ˆฃ๎€ƒ๎ˆฃ๎ŠŒ๎„ฐ๎ˆช๎ˆ™๎ˆฃ๎ˆž๎ˆ ๎ˆฃ๎€ƒ๎„ฐ๎ˆ–๎ˆ›๎„ฎ๎„ฒ๎ˆ๎„ฑ๎„ฒ๎„ฎ๎„ฑ๎ˆ˜๎ˆข
๎ˆž๎„ฎ๎€ƒ๎ˆ•๎„ฐ๎ˆ•๎„ฎ๎ˆš๎ˆซ๎„ฑ๎„ฐ๎ˆš๎€ƒ๎ˆฉ๎„ฒ๎ˆš๎€ƒ๎ˆ˜๎€ƒ๎„ฏ๎ˆ ๎ˆ๎ˆ’๎€ƒ๎„ฑ๎„ฒ๎ˆ˜๎ˆž๎€ƒ๎ˆ ๎ŠŒ๎ˆ ๎ˆ“๎„ฎ๎€ƒ๎ŠŒ๎ˆก๎ˆ ๎„ฑ๎„ฎ๎ˆก๎„ฒ๎ˆ๎„ฒ๎„ฎ๎ˆš๎€ƒ๎„ฎ๎ˆฃ๎„ฒ๎ˆฉ๎€ƒ๎„ฒ๎ˆ 
๎„ฑ๎„ฒ๎ˆ ๎ˆš๎ˆค๎„ฐ๎ˆ“๎ˆ ๎€ƒ๎ˆ๎ŠŒ๎ˆ ๎ˆก๎„ฐ๎ˆ“๎€ƒ๎ˆž๎„ฎ๎€ƒ๎„ฑ๎„ฒ๎ˆ˜๎ˆก๎ˆ“๎ˆŸ๎„ฐ๎ˆš๎€ƒ๎„ฒ๎ˆ ๎€ƒ๎ŠŒ๎„ฐ๎ˆž๎„ฒ๎„ฎ๎ŠŒ๎ˆœ๎ˆ๎„ฑ๎ˆš๎ˆ ๎€ƒ๎„ฒ๎ˆ ๎ˆฃ
๎„ฑ๎ˆฃ๎ˆž๎„ฏ๎ˆฃ๎„ฎ๎„ฑ๎ˆ๎ˆ‘๎ˆž๎ˆ ๎ˆฃ๎€ƒ๎ˆ•๎ˆ๎ˆก๎ˆ ๎ˆฃ๎ˆข๎€ƒ๎ˆฉ๎ˆœ๎ˆ ๎ˆฃ๎€ƒ๎„ฒ๎ˆ ๎ˆฃ๎€ƒ๎„ฐ๎ˆŸ๎ˆ ๎ŠŒ๎ˆœ๎ˆš๎„ฑ๎ˆ๎ˆ ๎ˆช. ๎‡ผ๎ˆž๎ˆš๎„ฑ๎ˆค๎ˆช๎„ฑ๎„ฒ๎„ฐ๎€ƒ๎„ฒ๎ˆ˜
๎„ฏ๎ˆ ๎ˆ๎ˆ’๎€ƒ๎ˆฉ๎ŠŒ๎ˆฆ๎ˆข๎€ƒ๎„ฎ๎ŠŒ๎„ฎ๎ˆš๎„ฒ๎„ฐ๎ˆ“๎„ฒ๎„ฎ๎ˆš๎€ƒ๎ŠŒ๎ˆก๎ˆš๎ˆž
๎ˆž๎„ฎ๎€ƒ๎„ฐ๎ˆ–๎ˆ›๎„ฎ๎„ฒ๎„ฎ๎„ฑ๎„ฒ๎ˆ’๎„ฑ๎„ฐ๎„ฒ๎„ฐ๎€ƒ๎„ฒ๎ˆ ๎€ƒ๎„ฑ๎„ฒ๎ˆ ๎ˆš๎ˆค๎„ฐ๎ˆ“๎ˆ . ๎ˆ…๎€ƒ๎„ฒ๎ˆ ๎ˆ“๎ˆค๎ˆ ๎ˆข๎€ƒ๎„ฑ๎„ฒ๎ˆ ๎ˆž๎€ƒ๎ˆ ๎ŠŒ๎ˆ ๎ˆ“๎ˆ 
๎ŠŒ๎ˆก๎ˆ ๎„ฑ๎„ฎ๎ˆก๎„ฒ๎ˆ๎„ฒ๎„ฎ๎ˆš๎€ƒ๎ˆ˜๎€ƒ๎ˆ•๎ˆ๎„ฑ๎ˆ˜๎€ƒ๎ŠŒ๎ˆก๎ˆ‘๎ŠŒ๎„ฐ๎ˆš๎€ƒ๎ˆž๎„ฎ๎€ƒ๎ˆ‘๎ˆค๎„ฐ๎ˆš๎€ƒ๎ˆ๎ˆ‘๎ˆ–๎ˆš๎„ฑ๎„ฒ๎ˆ ๎€ƒ๎ŠŒ๎ˆ๎ˆค๎ˆ ๎ˆข
๎ˆ–๎ˆฃ๎ˆฅ๎ˆ ๎„ฑ๎„ฎ๎ˆž๎ˆ“๎„ฏ๎„ฎ๎ˆข 1,6cm (5/8").
๎ˆ†๎ˆ‡๎ˆ…๎‡ผ๎‡ฟ๎‡ป๎ˆ…๎ˆ†๎ˆ…๎‡ฟ๎‡พ๎ˆˆ๎‡พ: ๎ˆ€๎‡ฟ๎ˆƒ๎‡ป๎ˆŠ๎ˆƒ๎ˆ…๎ˆˆ๎€ƒ๎‡พ๎ˆ๎‡ผ๎ˆ€๎ˆ‰๎ˆ‡๎ˆ…๎ˆ†๎ˆ๎‡พ๎ˆ„๎‡ฟ๎‡น๎ˆˆ!
๎ˆ‰๎ˆ…๎€ƒ๎ˆ€๎ˆ…๎ˆŒ๎‡ฟ๎ˆ‚๎ˆ…๎€ƒ๎‡ณ๎€ƒ๎‡พ๎€ƒ๎‡ป๎‡ฟ๎‡น๎ˆ‰๎ˆ‡๎‡พ๎ˆˆ๎‡พ๎€ƒ๎‡พ๎ˆ๎‡ผ๎ˆ€๎ˆ‰๎ˆ‡๎‡ฟ๎ˆ€๎ˆ๎ˆƒ๎€ƒ๎ˆ€๎‡น๎ˆ๎ˆ๎‡ป๎‡ฟ๎ˆ๎ˆƒ
๎ˆ‚๎ˆ†๎ˆ…๎ˆ‡๎‡ผ๎‡ฟ๎€ƒ๎ˆƒ๎‡น๎€ƒ๎ˆ†๎ˆ‡๎ˆ…๎ˆ€๎‡น๎ˆ๎‡ผ๎ˆˆ๎‡ผ๎‡ฟ๎€ƒ๎„ฌ๎‡น๎ˆƒ๎‡น๎ˆ‰๎ˆ…๎€ƒ๎‡ณ๎€ƒ๎ˆˆ๎ˆ…๎‡บ๎‡น๎ˆ‡๎ˆ…
๎ˆ‰๎ˆ‡๎‡น๎ˆŠ๎ˆ‚๎‡น๎ˆ‰๎‡ฟ๎ˆˆ๎ˆ‚๎ˆ…! ๎ˆ†๎‡น๎ˆƒ๎ˆ‰๎‡น๎€ƒ๎ˆž๎„ฎ๎€ƒ๎ˆ•๎„ฐ๎ˆ•๎„ฎ๎ˆš๎ˆซ๎ˆž๎„ฐ๎„ฑ๎„ฒ๎„ฐ๎€ƒ๎ˆฉ๎„ฒ๎ˆš๎€ƒ๎ˆ˜๎€ƒ๎ŠŒ๎„ฐ๎ˆก๎ˆš๎ˆ ๎ˆค๎ˆ’
๎ŠŒ๎ˆ“๎„ฑ๎ˆฆ๎€ƒ๎„ฎ๎ŠŒ๎ˆฉ๎€ƒ๎„ฒ๎ˆ˜๎ˆž๎€ƒ๎„ฐ๎ŠŒ๎ˆš๎„ณ๎ˆ๎ˆž๎„ฐ๎ˆš๎„ฎ๎€ƒ๎„ฒ๎ˆ ๎ŠŒ๎ˆ ๎ˆ™๎ˆ‘๎„ฒ๎ˆ˜๎„ฑ๎ˆ˜๎ˆข๎€ƒ๎„ฏ๎„ฐ๎ˆž๎€ƒ๎ˆ‘๎ˆค๎„ฐ๎ˆš๎€ƒ๎ˆ˜๎ˆœ๎„ฐ๎ˆ›๎„ฒ๎ˆก๎ˆš๎ˆ›๎ˆ
๎ˆ›๎„ฎ๎ˆœ๎ˆซ๎„ฏ๎ˆš๎„ฎ๎€ƒ๎ŠŒ๎ˆก๎ˆš๎ˆž๎€ƒ๎„ฎ๎ˆž๎ˆ ๎ˆ“๎ˆŸ๎„ฐ๎„ฒ๎„ฐ๎€ƒ๎ˆ ๎ŠŒ๎ˆ‘๎ˆข๎€ƒ๎ˆ’๎€ƒ๎„ฐ๎ˆ–๎ˆ›๎„ฎ๎„ฒ๎„ฎ๎„ฑ๎„ฒ๎ˆ’๎„ฑ๎„ฐ๎„ฒ๎„ฐ๎€ƒ๎„ฑ๎„ณ๎ˆš๎ˆ–๎ˆ›๎„ฒ๎ˆ’๎ˆก๎„ฐ๎ˆข.
๎ˆ†๎ˆ‡๎ˆ…๎‡ผ๎‡ฟ๎‡ป๎ˆ…๎ˆ†๎ˆ…๎‡ฟ๎‡พ๎ˆˆ๎‡พ: ๎ˆ€๎‡ฟ๎ˆƒ๎‡ป๎ˆŠ๎ˆƒ๎ˆ…๎ˆˆ๎€ƒ๎‡ผ๎ˆ€๎ˆ‡๎‡พ๎ˆ„๎‡พ๎ˆˆ๎€ƒ๎ˆ€๎‡น๎‡ฟ
๎ˆ†๎ˆŠ๎ˆ‡๎ˆ€๎‡น๎„ซ๎‡ฟ๎‡น๎ˆˆ! ๎ˆ‰๎ˆ…๎€ƒ๎ˆ€๎ˆ…๎ˆŒ๎‡ฟ๎ˆ‚๎ˆ…๎€ƒ๎‡ณ๎€ƒ๎‡พ๎€ƒ๎‡ป๎‡ฟ๎‡น๎ˆ‰๎ˆ‡๎‡พ๎ˆˆ๎‡พ๎€ƒ๎ˆˆ๎ˆ๎ˆ๎‡พ๎ˆƒ๎ˆ๎ˆˆ๎‡ผ๎ˆ๎ˆƒ
๎‡น๎‡ผ๎ˆ‡๎‡ฟ๎ˆ…๎ˆŠ๎€ƒ๎ˆ‚๎ˆ†๎ˆ…๎ˆ‡๎‡ผ๎‡ฟ๎€ƒ๎ˆƒ๎‡น๎€ƒ๎ˆ†๎ˆ‡๎ˆ…๎ˆ€๎‡น๎ˆ๎‡ผ๎ˆˆ๎‡ผ๎‡ฟ๎€ƒ๎„ฌ๎‡น๎ˆƒ๎‡น๎ˆ‰๎ˆ…๎€ƒ๎‡ณ๎€ƒ๎ˆˆ๎ˆ…๎‡บ๎‡น๎ˆ‡๎ˆ…
๎ˆ‰๎ˆ‡๎‡น๎ˆŠ๎ˆ‚๎‡น๎ˆ‰๎‡ฟ๎ˆˆ๎ˆ‚๎ˆ…! ๎ˆ†๎‡น๎ˆƒ๎ˆ‰๎‡น๎€ƒ๎ˆž๎„ฎ๎€ƒ๎ˆ•๎„ฐ๎ˆ•๎„ฎ๎ˆš๎ˆซ๎ˆž๎„ฐ๎„ฑ๎„ฒ๎„ฐ๎€ƒ๎ˆฉ๎„ฒ๎ˆš๎€ƒ๎ˆ˜๎€ƒ๎ŠŒ๎„ฐ๎ˆก๎ˆš๎ˆ ๎ˆค๎ˆ’
๎ŠŒ๎ˆ“๎„ฑ๎ˆฆ๎€ƒ๎„ฎ๎ŠŒ๎ˆฉ๎€ƒ๎„ฒ๎ˆ˜๎ˆž๎€ƒ๎„ฐ๎ŠŒ๎ˆš๎„ณ๎ˆ๎ˆž๎„ฐ๎ˆš๎„ฎ๎€ƒ๎„ฒ๎ˆ ๎ŠŒ๎ˆ ๎ˆ™๎ˆ‘๎„ฒ๎ˆ˜๎„ฑ๎ˆ˜๎ˆข๎€ƒ๎„ฏ๎„ฐ๎ˆž๎€ƒ๎ˆ‘๎ˆค๎„ฐ๎ˆš๎€ƒ๎„ฑ๎ˆฆ๎ˆœ๎ˆ’๎ˆž๎ˆฆ๎„ฑ๎ˆ˜
๎„ฎ๎„ฐ๎ˆก๎ˆ“๎ˆ ๎ˆฃ, ๎ˆž๎„ฐ๎ˆก๎ˆ ๎ˆช, ๎„ฎ๎ŠŒ๎ˆ ๎ˆ•๎ˆœ๎ˆ’๎„ฒ๎ˆฆ๎ˆž๎€ƒ๎ˆ’๎€ƒ๎ˆ๎ˆœ๎ˆœ๎ˆ˜๎€ƒ๎„ฑ๎ˆฆ๎ˆœ๎ˆ’๎ˆž๎ˆฆ๎„ฑ๎ˆ˜๎€ƒ๎ŠŒ๎ˆก๎ˆš๎ˆž๎€ƒ๎ˆ›๎ˆฉ๎ˆฅ๎„ฐ๎„ฒ๎„ฐ,
๎„ฎ๎ˆž๎ˆ ๎ˆ“๎ˆŸ๎„ฐ๎„ฒ๎„ฐ๎€ƒ๎ˆ ๎ŠŒ๎ˆ‘๎ˆข๎€ƒ๎ˆ’๎€ƒ๎„ฐ๎ˆ–๎ˆ›๎„ฎ๎„ฒ๎„ฎ๎„ฑ๎„ฒ๎ˆ’๎„ฑ๎„ฐ๎„ฒ๎„ฐ๎€ƒ๎„ฑ๎„ณ๎ˆš๎ˆ–๎ˆ›๎„ฒ๎ˆ’๎ˆก๎„ฐ๎ˆข.
1. ๎‡น๎ˆž๎ˆ ๎ˆ“๎ˆŸ๎„ฒ๎„ฐ๎€ƒ๎„ฒ๎ˆ˜๎ˆž๎€ƒ๎ŠŒ๎ˆœ๎ˆ๎ˆ›๎„ฎ๎€ƒ๎„ฒ๎ˆ ๎ˆ“๎ˆค๎ˆ ๎ˆฃ (๎‡น) ๎ˆ–๎ˆš๎„ฎ๎€ƒ๎ˆž๎„ฎ๎€ƒ๎„ฒ๎ˆ˜๎ˆž๎€ƒ๎ŠŒ๎ˆก๎ˆ ๎„ฐ๎„ฒ๎ˆ ๎ˆš๎ˆ๎ˆ๎„ฑ๎„ฐ๎„ฒ๎„ฐ
๎ˆ–๎ˆš๎„ฎ๎€ƒ๎„ฒ๎ˆ ๎ŠŒ๎ˆ ๎ˆ™๎ˆ‘๎„ฒ๎ˆ˜๎„ฑ๎ˆ˜๎€ƒ๎„ฑ๎„ฒ๎ˆ ๎ˆž๎€ƒ๎„ฒ๎ˆ ๎ˆ“๎ˆค๎ˆ .
2. ๎‡น๎ˆœ๎„ณ๎„ฎ๎„ฏ๎ˆš๎ˆ๎„ฑ๎„ฒ๎„ฐ๎€ƒ๎„ฒ๎ˆ˜๎ˆž๎€ƒ๎ŠŒ๎ˆœ๎ˆ๎ˆ›๎„ฎ๎€ƒ๎„ฒ๎ˆ ๎ˆ“๎ˆค๎ˆ ๎ˆฃ (๎‡น) ๎ˆ›๎„ฎ๎ˆš๎€ƒ๎„ฑ๎ˆ˜๎ˆ๎„ฐ๎ˆš๎ˆซ๎„ฑ๎„ฒ๎„ฐ๎€ƒ๎„ฒ๎ˆš๎ˆข
๎ˆ™๎ˆ‘๎„ฑ๎„ฐ๎ˆš๎ˆข๎€ƒ๎ˆ–๎ˆš๎„ฎ๎€ƒ๎„ฒ๎ˆš๎ˆข๎€ƒ๎ˆ ๎ŠŒ๎ˆ‘๎ˆข๎€ƒ๎ˆ ๎„ฏ๎ˆ˜๎ˆ–๎ˆ ๎ˆช๎ˆข๎€ƒ๎„ฑ๎„ฒ๎ˆ˜๎ˆž๎€ƒ๎„ฐ๎ŠŒ๎ˆš๎ˆ™๎ˆฃ๎ˆ๎ˆ˜๎„ฒ๎ˆ’๎€ƒ๎ˆ™๎ˆ‘๎„ฑ๎ˆ˜
๎„ฒ๎ˆ ๎ŠŒ๎ˆ ๎ˆ™๎ˆ‘๎„ฒ๎ˆ˜๎„ฑ๎ˆ˜๎ˆข.
๎ˆˆ๎‡พ๎ˆ‚๎‡ผ๎‡ฟ๎ˆ๎ˆˆ๎‡พ: ๎„ซ๎ˆš๎„ฎ๎€ƒ๎„ฒ๎ˆ  iCLPFM3, ๎ˆ๎ŠŒ๎ˆ ๎ˆก๎ˆ ๎ˆช๎ˆž๎€ƒ๎ˆž๎„ฎ๎€ƒ๎ˆค๎ˆก๎ˆ˜๎„ฑ๎ˆš๎ˆ๎ˆ ๎ŠŒ๎ˆ ๎ˆš๎ˆ˜๎ˆ™๎ˆ ๎ˆช๎ˆž
๎ˆ ๎ˆš๎€ƒ๎„ฐ๎„ฑ๎ˆฆ๎„ฒ๎„ฐ๎ˆก๎ˆš๎ˆ›๎ˆ‘๎ˆข๎€ƒ๎ˆ’๎€ƒ๎„ฐ๎ˆŸ๎ˆฆ๎„ฒ๎„ฐ๎ˆก๎ˆš๎ˆ›๎ˆ‘๎ˆข๎€ƒ๎„ฒ๎ˆ‘๎„ฑ๎„ฑ๎„ฐ๎ˆก๎ˆš๎ˆข๎€ƒ๎ˆ ๎ŠŒ๎ˆ‘๎ˆข.
๎ˆˆ๎‡พ๎ˆ‚๎‡ผ๎‡ฟ๎ˆ๎ˆˆ๎‡พ: ๎„ซ๎ˆš๎„ฎ๎€ƒ๎„ฒ๎ˆ  iCXPFM3, ๎ˆค๎ˆก๎ˆ˜๎„ฑ๎ˆš๎ˆ๎ˆ ๎ŠŒ๎ˆ ๎ˆš๎ˆ’๎„ฑ๎„ฒ๎„ฐ๎€ƒ๎„ฒ๎ˆš๎ˆข๎€ƒ๎„ฒ๎ˆ‘๎„ฑ๎„ฑ๎„ฐ๎ˆก๎ˆš๎ˆข
๎„ฐ๎ˆŸ๎ˆฆ๎„ฒ๎„ฐ๎ˆก๎ˆš๎ˆ›๎ˆ‘๎ˆข๎€ƒ๎ˆ ๎ŠŒ๎ˆ‘๎ˆข๎€ƒ๎ˆ›๎„ฎ๎ˆš๎€ƒ๎„ฒ๎ˆš๎ˆข๎€ƒ๎„ฏ๎ˆช๎ˆ ๎€ƒ๎ˆ๎„ฐ๎„ฑ๎„ฎ๎ˆ“๎„ฐ๎ˆข๎€ƒ๎ˆ ๎ŠŒ๎ˆ‘๎ˆข๎€ƒ๎„ฑ๎„ฒ๎ˆ˜๎ˆž
๎ŠŒ๎ˆœ๎ˆ๎ˆ›๎„ฎ๎€ƒ๎„ฒ๎ˆ ๎ˆ“๎ˆค๎ˆ ๎ˆฃ๎€ƒ๎ˆ–๎ˆš๎„ฎ๎€ƒ๎„ฒ๎ˆ˜๎ˆž๎€ƒ๎„ฐ๎ˆ–๎ˆ›๎„ฎ๎„ฒ๎ˆ๎„ฑ๎„ฒ๎„ฎ๎„ฑ๎ˆ˜.
๎ˆˆ๎‡พ๎ˆ‚๎‡ผ๎‡ฟ๎ˆ๎ˆˆ๎‡พ: ๎ˆ‰๎ˆ ๎€ƒ๎ˆ›๎„ฎ๎„ฒ๎„ฎ๎ˆ›๎ˆฉ๎ˆก๎ˆฃ๎„ณ๎ˆ ๎€ƒ๎ˆ›๎ˆ‘๎ˆž๎„ฒ๎ˆก๎ˆ ๎€ƒ๎„ฒ๎ˆ˜๎ˆข๎€ƒ๎ˆ ๎ˆ™๎ˆฉ๎ˆž๎ˆ˜๎ˆข๎€ƒ๎ˆ™๎„ฎ๎€ƒ๎„ฐ๎ˆ“๎ˆž๎„ฎ๎ˆš
๎„ฐ๎ˆฃ๎ˆ™๎ˆฃ๎ˆ–๎ˆก๎„ฎ๎ˆ๎ˆ๎ˆš๎„ฑ๎ˆ๎ˆ‘๎ˆž๎ˆ ๎€ƒ๎ˆ๎„ฐ๎€ƒ๎„ฒ๎ˆ˜๎ˆž๎€ƒ๎ˆ›๎„ฐ๎ˆž๎„ฒ๎ˆก๎ˆš๎ˆ›๎ˆ’๎€ƒ๎ˆ–๎ˆก๎„ฎ๎ˆ๎ˆ๎ˆ’
๎ŠŒ๎ˆ๎ˆž๎ˆฆ๎€ƒ๎„ฑ๎„ฒ๎ˆš๎ˆข๎€ƒ๎„ฐ๎„ฒ๎ˆš๎ˆ›๎ˆ‘๎„ฒ๎„ฐ๎ˆข๎€ƒ๎ŠŒ๎ˆ ๎ˆฃ๎€ƒ๎ˆ•๎ˆก๎ˆ“๎„ฑ๎ˆ›๎ˆ ๎ˆž๎„ฒ๎„ฎ๎ˆš๎€ƒ๎„ฎ๎ˆ›๎ˆก๎ˆš๎ˆ•๎ˆซ๎ˆข
๎ˆ›๎ˆ๎„ฒ๎ˆฆ๎€ƒ๎„ฎ๎ŠŒ๎ˆฉ๎€ƒ๎ˆ›๎ˆ๎ˆ™๎„ฐ๎€ƒ๎ˆ๎ˆก๎ˆ™๎ˆก๎ˆฆ๎„ฑ๎ˆ˜. ๎ˆ๎ˆ๎ˆ•๎„ฐ๎„ฒ๎„ฐ๎€ƒ๎„ฒ๎ˆ ๎€ƒ๎ˆฃ๎ŠŒ๎ˆฉ๎ˆฅ๎ˆ˜
๎„ฑ๎„ฎ๎ˆข๎€ƒ๎ˆ›๎„ฎ๎„ฒ๎ˆ๎€ƒ๎„ฒ๎ˆ ๎ˆž๎€ƒ๎ˆ›๎„ฎ๎ˆ™๎ˆ ๎ˆก๎ˆš๎„ฑ๎ˆ๎ˆฉ๎€ƒ๎„ฒ๎ˆ˜๎ˆข๎€ƒ๎ˆ™๎ˆ‘๎„ฑ๎ˆ˜๎ˆข๎€ƒ๎„ฑ๎„ฒ๎ˆ’๎ˆก๎ˆš๎ˆŸ๎ˆ˜๎ˆข.
3. ๎‡น๎ˆž๎ˆ ๎ˆ“๎ˆŸ๎„ฒ๎„ฐ๎€ƒ๎ˆ ๎ŠŒ๎ˆ‘๎ˆข๎€ƒ๎ˆ ๎„ฏ๎ˆ˜๎ˆ–๎ˆ ๎ˆช๎ˆข๎€ƒ๎„ฏ๎ˆš๎„ฎ๎ˆ๎ˆ‘๎„ฒ๎ˆก๎ˆ ๎ˆฃ 5/16" (7,9 mm) ๎„ฑ๎„ฒ๎ˆ ๎ˆž
๎ˆŸ๎ˆช๎ˆœ๎ˆš๎ˆž๎ˆ ๎€ƒ๎ˆ ๎ˆก๎ˆ™๎ˆ ๎„ฑ๎„ฒ๎ˆ๎„ฒ๎ˆ˜๎€ƒ๎„ฑ๎„ฒ๎ˆš๎ˆข๎€ƒ๎„ฑ๎ˆ˜๎ˆ๎„ฐ๎ˆš๎ˆฆ๎ˆ๎ˆ‘๎ˆž๎„ฐ๎ˆข๎€ƒ๎ˆ™๎ˆ‘๎„ฑ๎„ฐ๎ˆš๎ˆข. ๎ˆ…๎ˆš๎€ƒ๎ˆ ๎ŠŒ๎ˆ‘๎ˆข
๎ŠŒ๎ˆก๎ˆ‘๎ŠŒ๎„ฐ๎ˆš๎€ƒ๎ˆž๎„ฎ๎€ƒ๎ˆ‘๎ˆค๎ˆ ๎ˆฃ๎ˆž๎€ƒ๎ˆ•๎ˆ๎ˆ™๎ˆ ๎ˆข๎€ƒ๎„ฒ๎ˆ ๎ˆฃ๎ˆœ๎ˆ๎ˆค๎ˆš๎„ฑ๎„ฒ๎ˆ ๎ˆž 2 ยฝ ๎ˆ“๎ˆž๎„ฒ๎„ฑ๎„ฐ๎ˆข.
4. ๎ˆ‰๎ˆ ๎ŠŒ๎ˆ ๎ˆ™๎„ฐ๎„ฒ๎ˆ’๎„ฑ๎„ฒ๎„ฐ๎€ƒ๎„ฒ๎ˆ‘๎„ฑ๎„ฑ๎„ฐ๎ˆก๎„ฎ๎€ƒ๎ˆ ๎ˆช๎ŠŒ๎„ฎ๎€ƒ๎„ฒ๎„ฑ๎ˆš๎ˆ๎ˆ‘๎ˆž๎„ฒ๎ˆ ๎ˆฃ (E) ๎„ฑ๎„ฒ๎ˆš๎ˆข๎€ƒ๎ˆ ๎ŠŒ๎ˆ‘๎ˆข
๎ŠŒ๎ˆ ๎ˆฃ๎€ƒ๎„ฎ๎ˆž๎ˆ ๎ˆ“๎ˆŸ๎„ฎ๎„ฒ๎„ฐ. ๎ˆ‹๎ˆก๎ˆ˜๎„ฑ๎ˆš๎ˆ๎ˆ ๎ŠŒ๎ˆ ๎ˆš๎ˆ’๎„ฑ๎„ฒ๎„ฐ๎€ƒ๎ˆ‘๎ˆž๎„ฎ๎€ƒ๎„ฑ๎„ณ๎ˆฃ๎ˆก๎ˆ“๎€ƒ๎ˆ–๎ˆš๎„ฎ๎€ƒ๎ˆž๎„ฎ
๎„ฑ๎ŠŒ๎ˆก๎ˆซ๎ˆŸ๎„ฐ๎„ฒ๎„ฐ๎€ƒ๎„ฒ๎„ฎ๎€ƒ๎ˆ ๎ˆช๎ŠŒ๎„ฎ๎€ƒ๎„ฑ๎„ฒ๎ˆš๎ˆข๎€ƒ๎ˆ ๎ŠŒ๎ˆ‘๎ˆข.
๎ˆˆ๎‡พ๎ˆ‚๎‡น๎ˆƒ๎ˆ‰๎‡ฟ๎ˆ€๎ˆ…: ๎ˆ‰๎„ฎ๎€ƒ๎ˆ ๎ˆช๎ŠŒ๎„ฎ๎€ƒ๎ŠŒ๎ˆก๎ˆ‘๎ŠŒ๎„ฐ๎ˆš๎€ƒ๎ˆž๎„ฎ๎€ƒ๎„ฐ๎ˆ–๎ˆ›๎„ฎ๎„ฒ๎„ฎ๎„ฑ๎„ฒ๎„ฎ๎ˆ™๎ˆ ๎ˆช๎ˆž๎€ƒ๎ˆ๎ˆ‘๎„ฑ๎ˆฆ๎€ƒ๎„ฒ๎ˆ˜๎ˆข
๎„ฐ๎ŠŒ๎ˆš๎ˆ›๎ˆ๎ˆœ๎ˆฃ๎ˆฅ๎ˆ˜๎ˆข๎€ƒ๎„ฒ๎ˆ ๎ˆ“๎ˆค๎ˆ ๎ˆฃ, ๎„ฎ๎ˆž๎€ƒ๎ˆฃ๎ŠŒ๎ˆ๎ˆก๎ˆค๎„ฐ๎ˆš, ๎ˆ‘๎ˆฆ๎ˆข๎€ƒ๎ˆฉ๎„ฒ๎ˆ ๎ˆฃ๎€ƒ๎„ฐ๎ˆ“๎ˆž๎„ฎ๎ˆš๎€ƒ๎„ฐ๎ŠŒ๎ˆ“๎ŠŒ๎„ฐ๎„ฏ๎„ฎ๎€ƒ๎ˆ๎„ฐ๎€ƒ๎„ฒ๎ˆ ๎ˆž
๎„ฒ๎ˆ ๎ˆ“๎ˆค๎ˆ ๎€ƒ๎„ฎ๎ŠŒ๎ˆฉ๎€ƒ๎„ฑ๎ˆ›๎ˆฃ๎ˆก๎ˆฉ๎„ฏ๎„ฐ๎ˆ๎„ฎ.
5. ๎ˆ‹๎ˆก๎ˆ˜๎„ฑ๎ˆš๎ˆ๎ˆ ๎ŠŒ๎ˆ ๎ˆš๎ˆซ๎ˆž๎„ฒ๎„ฎ๎ˆข๎€ƒ๎ˆ›๎ˆœ๎„ฐ๎ˆš๎„ฏ๎ˆ“ 1/2" (12,7 mm), ๎„ฐ๎ˆ–๎ˆ›๎„ฎ๎„ฒ๎„ฎ๎„ฑ๎„ฒ๎ˆ’๎„ฑ๎„ฒ๎„ฐ
๎„ฒ๎ˆš๎ˆข๎€ƒ๎ˆ•๎ˆ“๎„ฏ๎„ฐ๎ˆข (C) ๎ˆ๎ˆ‘๎„ฑ๎ˆฆ๎€ƒ๎„ฒ๎ˆฆ๎ˆž๎€ƒ๎„ฐ๎ŠŒ๎ˆ“๎ŠŒ๎„ฐ๎„ฏ๎ˆฆ๎ˆž๎€ƒ๎„ฏ๎„ฎ๎ˆ›๎„ฒ๎ˆฃ๎ˆœ๎ˆ“๎ˆฆ๎ˆž (D) ๎ˆ›๎„ฎ๎ˆš๎€ƒ๎„ฒ๎ˆ˜๎ˆข
๎ŠŒ๎ˆœ๎ˆ๎ˆ›๎„ฎ๎ˆข๎€ƒ๎„ฒ๎ˆ ๎ˆ“๎ˆค๎ˆ ๎ˆฃ (๎‡น) ๎„ฑ๎„ฒ๎„ฎ๎€ƒ๎ˆ ๎ˆช๎ŠŒ๎„ฎ๎€ƒ๎„ฒ๎„ฑ๎ˆš๎ˆ๎ˆ‘๎ˆž๎„ฒ๎ˆ ๎ˆฃ (E).
1A
๎€‹๎‡น๎ŠŒ๎„ฐ๎ˆš๎ˆ›๎ˆ ๎ˆž๎ˆ“๎ˆ—๎„ฐ๎„ฒ๎„ฎ๎ˆš๎€ƒ๎„ฒ๎ˆ  iCMPFM)
1
CENTER
LINE
x 4
2
(A)
3
x 4
1/2" (12,7 mm)
(Y) x 4
(Y)
๎‰ƒ๎Š‘๎Š‹๎‰ฒ๎€ƒ๎‰ธ๎Š‹๎Š€๎Š‹๎‰ธ๎‰ท๎Š‰
๎Š…๎‰ธ๎€ƒ๎Š๎Š‰๎Š†
๎Š๎Š‰๎Š€๎Š–๎Š‰๎€ƒ๎‰ฒ๎Š‹๎ŠŠ
๎Š๎Šƒ๎Š๎ŠŒ๎ŠŠ๎‰ท๎‰ธ๎Š…๎‰ฒ
๎‰ƒ๎Š‹๎‰ผ๎€ƒ๎‰ƒ๎‰ท๎‰ป๎‰ถ๎ŠŠ๎ŠŽ -
5/16 x 3 1/4"
(M8 x 82,5mm)
๎‰ˆ๎Š‰๎Š€๎Š–๎Š‰๎ŠŽ๎€ƒ๎‰ฒ๎Š‹๎ŠŠ
๎‰ผ๎€ƒ๎Š๎Š‰๎Š‘๎‰ด๎Š„๎‰ฒ
๎ˆต๎Š‹๎‰ฟ๎Šƒ๎‰ณ๎Š„๎Š๎Š—๎‰ป
๎Š๎Š‰๎Š€๎Š–๎Š‰๎Š
(A)
(W)
(X)
5
4
(A)
(X) x 4
(W) x 4
๎Š๎Šƒ๎Š๎ŠŒ๎ŠŠ๎‰ท๎‰ธ๎Š…๎‰ฒ
๎ˆˆ๎„ฐ๎ˆš๎ˆก๎ˆ iC-PFM3 ๎ˆ…๎„ฏ๎ˆ˜๎ˆ–๎ˆ“๎„ฐ๎ˆข๎€ƒ๎„ฐ๎ˆ–๎ˆ›๎„ฎ๎„ฒ๎ˆ๎„ฑ๎„ฒ๎„ฎ๎„ฑ๎ˆ˜๎ˆข
62
๎ˆ‰๎ˆ…๎ˆ†๎ˆ…๎„ฌ๎‡ผ๎ˆ‰๎‡พ๎ˆˆ๎ˆ‰๎‡ผ๎€ƒ๎ˆ‰๎ˆ…๎ˆŠ๎ˆˆ๎€ƒ๎‡บ๎ˆ‡๎‡น๎ˆ‹๎‡ฟ๎ˆ…๎ˆƒ๎‡ผ๎ˆˆ
๎ˆˆ๎ˆ‰๎‡พ๎ˆƒ๎€ƒ๎ˆ…๎„ฌ๎ˆ…๎ˆƒ๎‡พ
๎ˆ†๎ˆ‡๎ˆ…๎‡ผ๎‡ฟ๎‡ป๎ˆ…๎ˆ†๎ˆ…๎‡ฟ๎‡พ๎ˆˆ๎‡พ: ๎ˆ‰๎ˆ ๎€ƒ๎„ฐ๎ˆœ๎ˆ๎ˆค๎ˆš๎„ฑ๎„ฒ๎ˆ ๎€ƒ๎ˆ๎ˆ‘๎ˆ–๎„ฐ๎ˆ™๎ˆ ๎ˆข๎€ƒ๎„ฒ๎ˆ ๎ˆฃ
๎„ฑ๎ˆค๎ˆ’๎ˆ๎„ฎ๎„ฒ๎ˆ ๎ˆข๎€ƒ๎ˆ ๎ŠŒ๎ˆซ๎ˆž๎€ƒ๎„ฐ๎ˆ“๎ˆž๎„ฎ๎ˆš 100 mm x 100 mm ๎ˆ–๎ˆš๎„ฎ๎€ƒ๎„ฒ๎ˆ  iCMPFM3
๎ˆ›๎„ฎ๎ˆš 200 mm x 200 mm ๎ˆ–๎ˆš๎„ฎ๎€ƒ๎„ฒ๎„ฎ iCLPFM3 ๎ˆ›๎„ฎ๎ˆš iCXPFM3.
1. ๎ˆ‰๎ˆ ๎ŠŒ๎ˆ ๎ˆ™๎„ฐ๎„ฒ๎ˆ’๎„ฑ๎„ฒ๎„ฐ๎€ƒ๎„ฒ๎ˆ˜๎ˆž๎€ƒ๎ˆ ๎ˆ™๎ˆฉ๎ˆž๎ˆ˜๎€ƒ๎ˆ๎„ฐ๎€ƒ๎„ฒ๎ˆ˜๎ˆž๎€ƒ๎ŠŒ๎ˆก๎ˆฉ๎„ฑ๎ˆ ๎ˆฅ๎ˆ˜๎€ƒ๎ŠŒ๎ˆก๎ˆ ๎ˆ•๎ˆ ๎ˆœ๎ˆ’๎ˆข
๎ŠŒ๎ˆก๎ˆ ๎ˆข๎€ƒ๎„ฒ๎„ฎ๎€ƒ๎ˆ›๎ˆ๎„ฒ๎ˆฆ๎€ƒ๎„ฑ๎„ฐ๎€ƒ๎ˆ๎ˆš๎„ฎ๎€ƒ๎ŠŒ๎ˆก๎ˆ ๎„ฑ๎„ฒ๎„ฎ๎„ฒ๎„ฐ๎ˆฃ๎„ฒ๎ˆš๎ˆ›๎ˆ’๎€ƒ๎„ฐ๎ŠŒ๎ˆš๎„ณ๎ˆ๎ˆž๎„ฐ๎ˆš๎„ฎ.
๎ˆ†๎ˆ‡๎ˆ…๎ˆˆ๎ˆ…๎ˆ‹๎‡พ: ๎‡น๎ˆž๎€ƒ๎ˆค๎ˆก๎ˆ˜๎„ฑ๎ˆš๎ˆ๎ˆ ๎ŠŒ๎ˆ ๎ˆš๎ˆ’๎„ฑ๎„ฐ๎„ฒ๎„ฐ๎€ƒ๎ˆ•๎ˆ“๎„ฏ๎„ฐ๎ˆข๎€ƒ๎„ฎ๎ˆ›๎„ฎ๎„ฒ๎ˆ๎ˆœ๎ˆœ๎ˆ˜๎ˆœ๎ˆ˜๎ˆข
๎„ฏ๎ˆš๎„ฎ๎ˆ๎ˆ‘๎„ฒ๎ˆก๎ˆ ๎ˆฃ๎€ƒ๎ˆ๎ŠŒ๎ˆ ๎ˆก๎„ฐ๎ˆ“๎€ƒ๎ˆž๎„ฎ๎€ƒ๎ŠŒ๎ˆก๎ˆ ๎ˆ›๎„ฎ๎ˆœ๎ˆ‘๎„ฑ๎„ฐ๎„ฒ๎„ฐ๎€ƒ๎ˆ•๎ˆœ๎ˆ๎ˆ•๎ˆ˜๎€ƒ๎„ฑ๎„ฒ๎ˆ˜๎ˆž๎€ƒ๎ˆ ๎ˆ™๎ˆฉ๎ˆž๎ˆ˜๎€ƒ๎„ฑ๎„ฎ๎ˆข!
๎ˆ…๎ˆš๎€ƒ๎„ฑ๎ˆฆ๎„ฑ๎„ฒ๎ˆ‘๎ˆข๎€ƒ๎ˆ•๎ˆ“๎„ฏ๎„ฐ๎ˆข๎€ƒ๎ˆ™๎„ฎ๎€ƒ๎ˆ•๎ˆš๎„ฏ๎ˆซ๎ˆž๎ˆ ๎ˆž๎„ฒ๎„ฎ๎ˆš๎€ƒ๎„ฐ๎ˆช๎ˆ›๎ˆ ๎ˆœ๎„ฎ๎€ƒ๎„ฑ๎„ฒ๎ˆ ๎€ƒ๎„ฑ๎ŠŒ๎„ฐ๎ˆ“๎ˆก๎ˆฆ๎ˆ๎„ฎ๎€ƒ๎„ฒ๎ˆฆ๎ˆž
๎ˆ ๎ŠŒ๎ˆซ๎ˆž๎€ƒ๎„ฑ๎„ฒ๎ˆ’๎ˆก๎ˆš๎ˆŸ๎ˆ˜๎ˆข๎€ƒ๎„ฒ๎ˆ˜๎ˆข๎€ƒ๎ˆ ๎ˆ™๎ˆฉ๎ˆž๎ˆ˜๎ˆข.
2. ๎‡ผ๎ŠŒ๎ˆš๎ˆœ๎ˆ‘๎ˆŸ๎„ฒ๎„ฐ๎€ƒ๎„ฒ๎ˆ˜ ๎„ฏ๎ˆš๎ˆ๎ˆ๎„ฐ๎„ฒ๎ˆก๎ˆ ๎€ƒ๎ˆ•๎ˆš๎„ฏ๎ˆซ๎ˆž๎€ƒ๎„ฐ๎ˆŸ๎„ฐ๎„ฒ๎ˆ๎ˆ—๎ˆ ๎ˆž๎„ฒ๎„ฎ๎ˆข๎€ƒ๎„ฒ๎ˆš๎ˆข๎€ƒ๎„ฑ๎ˆฃ๎„ฑ๎ˆ›๎„ฐ๎ˆฃ๎„ฎ๎„ฑ๎ˆ“๎„ฐ๎ˆข
๎ˆฃ๎ˆœ๎ˆš๎ˆ›๎ˆ ๎ˆช (FA-FO) (8 mm, 6 mm, 5 mm, ๎ˆ’ 4 mm) ๎ˆ›๎„ฎ๎ˆš
๎„ฑ๎ˆฃ๎ˆ–๎ˆ›๎ˆก๎ˆ“๎ˆž๎ˆ ๎ˆž๎„ฒ๎„ฎ๎ˆข๎€ƒ๎ˆ๎„ฐ๎€ƒ๎„ฒ๎ˆš๎ˆข๎€ƒ๎ˆ ๎ŠŒ๎ˆ‘๎ˆข๎€ƒ๎„ฑ๎„ฒ๎ˆ’๎ˆก๎ˆš๎ˆŸ๎ˆ˜๎ˆข๎€ƒ๎„ฑ๎„ฒ๎ˆ˜๎ˆž๎€ƒ๎ˆ ๎ˆ™๎ˆฉ๎ˆž๎ˆ˜.
3. ๎‡ผ๎ŠŒ๎ˆš๎ˆœ๎ˆ‘๎ˆŸ๎„ฒ๎„ฐ๎€ƒ๎„ฏ๎ˆš๎„ฎ๎ˆค๎ˆฆ๎ˆก๎ˆš๎„ฑ๎„ฒ๎ˆš๎ˆ›๎ˆ:
โ€ข ๎‡น๎ˆž๎€ƒ๎ˆ ๎ˆš๎€ƒ๎ˆ ๎ŠŒ๎ˆ‘๎ˆข๎€ƒ๎„ฑ๎„ฒ๎ˆ’๎ˆก๎ˆš๎ˆŸ๎ˆ˜๎ˆข๎€ƒ๎„ฏ๎„ฐ๎ˆž๎€ƒ๎„ฐ๎ˆ“๎ˆž๎„ฎ๎ˆš๎€ƒ๎ˆ๎„ฐ๎€ƒ๎„ฐ๎„ฑ๎ˆ ๎ˆค๎ˆ‘๎ˆข๎€ƒ๎ˆ›๎„ฎ๎ˆš๎€ƒ๎ˆ ๎ˆš๎€ƒ๎„ฏ๎ˆช๎ˆ 
๎ˆ•๎ˆก๎„ฎ๎ˆค๎ˆ“๎ˆ ๎ˆž๎„ฐ๎ˆข (B) ๎ˆ๎ŠŒ๎ˆ ๎ˆก๎ˆ ๎ˆช๎ˆž๎€ƒ๎ˆž๎„ฎ๎€ƒ๎ˆ๎„ฐ๎ˆ“๎ˆž๎ˆ ๎ˆฃ๎ˆž๎€ƒ๎„ฐ๎ŠŒ๎ˆ“๎ŠŒ๎„ฐ๎„ฏ๎ˆ ๎ˆš๎€ƒ๎ŠŒ๎ˆ๎ˆž๎ˆฆ
๎„ฑ๎„ฒ๎ˆ˜๎ˆž๎€ƒ๎ˆ ๎ˆ™๎ˆฉ๎ˆž๎ˆ˜๎€ƒ๎„ฒ๎ˆฉ๎„ฒ๎„ฐ๎€ƒ๎„ฏ๎„ฐ๎ˆž๎€ƒ๎ˆค๎ˆก๎„ฐ๎ˆš๎ˆ๎ˆ—๎ˆ ๎ˆž๎„ฒ๎„ฎ๎ˆš๎€ƒ๎„ฏ๎ˆš๎„ฎ๎ˆค๎ˆฆ๎ˆก๎ˆš๎„ฑ๎„ฒ๎ˆš๎ˆ›๎ˆ.
โ€ข ๎‡น๎ˆž๎€ƒ๎ˆ ๎ˆš๎€ƒ๎ˆ ๎ŠŒ๎ˆ‘๎ˆข๎€ƒ๎„ฑ๎„ฒ๎ˆ’๎ˆก๎ˆš๎ˆŸ๎ˆ˜๎ˆข๎€ƒ๎„ฐ๎ˆ“๎ˆž๎„ฎ๎ˆš๎€ƒ๎ˆ๎„ฐ๎€ƒ๎„ฐ๎„ฑ๎ˆ ๎ˆค๎ˆ‘๎ˆข, ๎ˆ’๎€ƒ๎„ฎ๎ˆž
๎ŠŒ๎ˆก๎ˆ ๎„ฐ๎ˆŸ๎ˆ ๎ˆค๎ˆ‘๎ˆข๎€ƒ๎„ฏ๎„ฐ๎ˆž๎€ƒ๎„ฐ๎ŠŒ๎ˆš๎„ฒ๎ˆก๎ˆ‘๎ŠŒ๎ˆ ๎ˆฃ๎ˆž๎€ƒ๎„ฑ๎„ฒ๎ˆ ๎ˆฃ๎ˆข๎€ƒ๎ˆ•๎ˆก๎„ฎ๎ˆค๎ˆ“๎ˆ ๎ˆž๎„ฐ๎ˆข (B)
๎ˆž๎„ฎ๎€ƒ๎ˆ๎„ฐ๎ˆ“๎ˆž๎ˆ ๎ˆฃ๎ˆž๎€ƒ๎„ฐ๎ŠŒ๎ˆ“๎ŠŒ๎„ฐ๎„ฏ๎ˆ ๎ˆš, ๎„ฒ๎ˆฉ๎„ฒ๎„ฐ๎€ƒ๎ŠŒ๎ˆก๎ˆ‘๎ŠŒ๎„ฐ๎ˆš๎€ƒ๎ˆž๎„ฎ
๎ˆค๎ˆก๎ˆ˜๎„ฑ๎ˆš๎ˆ๎ˆ ๎ŠŒ๎ˆ ๎ˆš๎ˆ˜๎ˆ™๎ˆ ๎ˆช๎ˆž๎€ƒ๎„ฏ๎ˆš๎„ฎ๎ˆค๎ˆฆ๎ˆก๎ˆš๎„ฑ๎„ฒ๎ˆš๎ˆ›๎ˆ (FP ๎ˆ’ FQ).
โ€ข ๎‡น๎ˆž๎€ƒ๎„ฎ๎ŠŒ๎„ฎ๎ˆš๎„ฒ๎„ฐ๎ˆ“๎„ฒ๎„ฎ๎ˆš๎€ƒ๎ŠŒ๎ˆก๎ˆฉ๎„ฑ๎ˆ™๎„ฐ๎„ฒ๎ˆ ๎€ƒ๎ˆ•๎ˆ๎ˆ™๎ˆ ๎ˆข๎€ƒ๎ŠŒ๎ˆ“๎„ฑ๎ˆฆ๎€ƒ๎„ฎ๎ŠŒ๎ˆฉ๎€ƒ๎„ฒ๎ˆ˜๎ˆž
๎ˆ ๎ˆ™๎ˆฉ๎ˆž๎ˆ˜, (FP ๎ˆ›๎„ฎ๎ˆš FQ) ๎ˆ๎ŠŒ๎ˆ ๎ˆก๎ˆ ๎ˆช๎ˆž๎€ƒ๎ˆž๎„ฎ๎€ƒ๎„ฒ๎ˆ ๎ŠŒ๎ˆ ๎ˆ™๎„ฐ๎„ฒ๎ˆ˜๎ˆ™๎ˆ ๎ˆช๎ˆž
๎„ฏ๎ˆš๎„ฎ๎ˆค๎ˆฆ๎ˆก๎ˆš๎„ฑ๎„ฒ๎ˆš๎ˆ›๎ˆ๎€ƒ๎„ฒ๎ˆ ๎€ƒ๎ˆ‘๎ˆž๎„ฎ๎€ƒ๎ŠŒ๎ˆ๎ˆž๎ˆฆ๎€ƒ๎„ฑ๎„ฒ๎ˆ ๎€ƒ๎ˆ๎ˆœ๎ˆœ๎ˆ .
๎ˆ†๎ˆ‡๎ˆ…๎ˆˆ๎ˆ…๎ˆ‹๎‡พ: ๎‡น๎ˆž๎€ƒ๎ˆค๎ˆก๎ˆ˜๎„ฑ๎ˆš๎ˆ๎ˆ ๎ŠŒ๎ˆ ๎ˆš๎ˆ’๎„ฑ๎„ฐ๎„ฒ๎„ฐ๎€ƒ๎ˆ•๎ˆ“๎„ฏ๎„ฐ๎ˆข๎€ƒ๎„ฎ๎ˆ›๎„ฎ๎„ฒ๎ˆ๎ˆœ๎ˆœ๎ˆ˜๎ˆœ๎ˆ ๎ˆฃ
๎ˆ๎ˆ’๎ˆ›๎ˆ ๎ˆฃ๎ˆข๎€ƒ๎ˆ๎ŠŒ๎ˆ ๎ˆก๎„ฐ๎ˆ“๎€ƒ๎ˆž๎„ฎ๎€ƒ๎ŠŒ๎ˆก๎ˆ ๎ˆ›๎„ฎ๎ˆœ๎ˆ‘๎„ฑ๎„ฐ๎„ฒ๎„ฐ๎€ƒ๎ˆ•๎ˆœ๎ˆ๎ˆ•๎ˆ˜๎€ƒ๎„ฑ๎„ฒ๎ˆ˜๎ˆž๎€ƒ๎ˆ ๎ˆ™๎ˆฉ๎ˆž๎ˆ˜๎€ƒ๎„ฑ๎„ฎ๎ˆข!
๎ˆ…๎ˆš๎€ƒ๎„ฑ๎ˆฆ๎„ฑ๎„ฒ๎ˆ‘๎ˆข๎€ƒ๎ˆ•๎ˆ“๎„ฏ๎„ฐ๎ˆข๎€ƒ๎ˆ™๎„ฎ๎€ƒ๎ˆ‘๎ˆค๎ˆ ๎ˆฃ๎ˆž๎€ƒ๎„ฐ๎ŠŒ๎„ฎ๎ˆก๎ˆ›๎ˆ’๎€ƒ๎„ฏ๎ˆ‘๎„ฑ๎ˆ๎„ฐ๎ˆฃ๎„ฑ๎ˆ˜๎€ƒ๎„ฑ๎„ฒ๎ˆ 
๎„ฑ๎ŠŒ๎„ฐ๎ˆ“๎ˆก๎ˆฆ๎ˆ๎„ฎ๎€ƒ๎ˆค๎ˆฆ๎ˆก๎ˆ“๎ˆข๎€ƒ๎ˆž๎„ฎ๎€ƒ๎„ฎ๎ˆ›๎ˆ ๎ˆฃ๎ˆ๎ŠŒ๎ˆ ๎ˆช๎ˆž๎€ƒ๎„ฑ๎„ฒ๎ˆ ๎€ƒ๎ˆ›๎ˆ๎„ฒ๎ˆฆ๎€ƒ๎ˆ๎ˆ‘๎ˆก๎ˆ ๎ˆข๎€ƒ๎„ฒ๎ˆฆ๎ˆž
๎ˆ ๎ŠŒ๎ˆซ๎ˆž๎€ƒ๎„ฑ๎„ฒ๎ˆ’๎ˆก๎ˆš๎ˆŸ๎ˆ˜๎ˆข๎€ƒ๎„ฒ๎ˆ˜๎ˆข๎€ƒ๎ˆ ๎ˆ™๎ˆฉ๎ˆž๎ˆ˜๎ˆข.
4. ๎‡ผ๎ŠŒ๎ˆš๎ˆœ๎ˆ‘๎ˆŸ๎„ฒ๎„ฐ๎€ƒ๎„ฒ๎ˆ  ๎ˆ๎ˆ’๎ˆ›๎ˆ ๎ˆข๎€ƒ๎„ฒ๎ˆฆ๎ˆž๎€ƒ๎ˆ•๎ˆš๎„ฏ๎ˆซ๎ˆž:
โ€ข ๎ˆ‹๎ˆก๎ˆ˜๎„ฑ๎ˆš๎ˆ๎ˆ ๎ŠŒ๎ˆ ๎ˆš๎ˆซ๎ˆž๎„ฒ๎„ฎ๎ˆข๎€ƒ๎„ฒ๎ˆ ๎€ƒ๎ˆค๎ˆ‘๎ˆก๎ˆš๎€ƒ๎„ฑ๎„ฎ๎ˆข, ๎„ฒ๎ˆ ๎ŠŒ๎ˆ ๎ˆ™๎„ฐ๎„ฒ๎ˆ’๎„ฑ๎„ฒ๎„ฐ๎€ƒ๎„ฒ๎ˆ˜
๎ˆ•๎ˆ“๎„ฏ๎„ฎ๎€ƒ๎ˆ‚๎‡ฟ๎ˆ€๎ˆ‡๎ˆ…๎ˆ‰๎‡ผ๎ˆ‡๎ˆ…๎ˆŠ๎€ƒ๎ˆ๎ˆ’๎ˆ›๎ˆ ๎ˆฃ๎ˆข๎€ƒ๎„ฒ๎ˆ˜๎ˆข๎€ƒ๎„ฐ๎ŠŒ๎ˆš๎ˆœ๎„ฐ๎ˆ–๎ˆ๎ˆ‘๎ˆž๎ˆ˜๎ˆข
๎„ฏ๎ˆš๎„ฎ๎ˆ๎ˆ‘๎„ฒ๎ˆก๎ˆ ๎ˆฃ (FA, FE, FI ๎ˆ’ FL) ๎ˆ๎ˆ‘๎„ฑ๎ˆฆ๎€ƒ๎„ฒ๎ˆ ๎ˆฃ๎€ƒ๎ˆ•๎ˆก๎„ฎ๎ˆค๎ˆ“๎ˆ ๎ˆž๎„ฎ
๎€‹๎‡บ), ๎„ฒ๎ˆ ๎ˆฃ๎€ƒ๎„ฏ๎„ฎ๎ˆ›๎„ฒ๎ˆฃ๎ˆœ๎ˆ“๎ˆ ๎ˆฃ๎€ƒ๎ˆ–๎„ฐ๎ˆž๎ˆš๎ˆ›๎ˆ’๎ˆข๎€ƒ๎ˆค๎ˆก๎ˆ’๎„ฑ๎ˆ˜๎ˆข (FS), ๎„ฒ๎ˆ ๎ˆฃ
๎„ฐ๎ŠŒ๎ˆš๎ˆœ๎„ฐ๎ˆ–๎ˆ๎ˆ‘๎ˆž๎ˆ ๎ˆฃ๎€ƒ๎„ฏ๎ˆš๎„ฎ๎ˆค๎ˆฆ๎ˆก๎ˆš๎„ฑ๎„ฒ๎ˆš๎ˆ›๎ˆ ๎ˆช (FP ๎ˆ’ FQ, ๎„ฎ๎ˆž
๎ˆค๎ˆก๎„ฐ๎ˆš๎ˆ๎ˆ—๎„ฐ๎„ฒ๎„ฎ๎ˆš), ๎„ฑ๎„ฒ๎ˆ˜๎ˆž๎€ƒ๎ˆ ๎ŠŒ๎ˆ’๎€ƒ๎„ฑ๎„ฒ๎ˆ’๎ˆก๎ˆš๎ˆŸ๎ˆ˜๎ˆข๎€ƒ๎„ฒ๎ˆ˜๎ˆข๎€ƒ๎ˆ ๎ˆ™๎ˆฉ๎ˆž๎ˆ˜๎ˆข. ๎ˆ‚๎‡พ
๎ˆ•๎ˆš๎„ฏ๎ˆซ๎ˆž๎„ฐ๎„ฒ๎„ฐ๎€ƒ๎„ฒ๎ˆ˜๎€ƒ๎ˆ•๎ˆ“๎„ฏ๎„ฎ๎€ƒ๎„ฑ๎„ฒ๎ˆ˜๎ˆž๎€ƒ๎ˆ ๎ŠŒ๎ˆ’๎€ƒ๎„ฑ๎„ฐ๎€ƒ๎„ฎ๎ˆฃ๎„ฒ๎ˆฉ๎€ƒ๎„ฒ๎ˆ ๎€ƒ๎„ฑ๎„ฒ๎ˆ๎„ฏ๎ˆš๎ˆ .
โ€ข ๎ˆ‰๎ˆ ๎€ƒ๎„ฑ๎ˆฆ๎„ฑ๎„ฒ๎ˆฉ๎€ƒ๎ˆ๎ˆ’๎ˆ›๎ˆ ๎ˆข๎€ƒ๎ˆ•๎ˆ“๎„ฏ๎„ฎ๎ˆข๎€ƒ๎„ฎ๎ŠŒ๎„ฎ๎ˆš๎„ฒ๎„ฐ๎ˆ“๎€ƒ๎ˆ˜๎€ƒ๎ˆ•๎ˆ๎„ฑ๎ˆ˜๎€ƒ๎„ฒ๎ˆ˜๎ˆข
๎ˆ›๎„ฐ๎„ณ๎„ฎ๎ˆœ๎ˆ’๎ˆข๎€ƒ๎„ฒ๎ˆ˜๎ˆข๎€ƒ๎ˆ•๎ˆ“๎„ฏ๎„ฎ๎ˆข๎€ƒ๎ˆž๎„ฎ๎€ƒ๎ŠŒ๎ˆก๎ˆ ๎„ฐ๎ˆŸ๎ˆ‘๎ˆค๎„ฐ๎ˆš๎€ƒ๎ŠŒ๎ˆ๎ˆž๎ˆฆ๎€ƒ๎„ฎ๎ŠŒ๎ˆฉ๎€ƒ๎„ฒ๎ˆ ๎ˆž
๎„ฐ๎ŠŒ๎ˆ“๎ŠŒ๎„ฐ๎„ฏ๎ˆ ๎€ƒ๎„ฏ๎„ฎ๎ˆ›๎„ฒ๎ˆช๎ˆœ๎ˆš๎ˆ ๎€ƒ๎ˆ๎ˆš๎„ฎ ๎„ฎ๎ŠŒ๎ˆฉ๎„ฑ๎„ฒ๎„ฎ๎„ฑ๎ˆ˜๎€ƒ๎ˆ“๎„ฑ๎ˆ˜๎€ƒ๎ˆ’๎€ƒ๎ˆ๎„ฐ๎ˆ–๎„ฎ๎ˆœ๎ˆช๎„ฒ๎„ฐ๎ˆก๎ˆ˜
๎„ฎ๎ŠŒ๎ˆฉ๎€ƒ๎„ฒ๎ˆ˜๎€ƒ๎„ฏ๎ˆš๎ˆ๎ˆ๎„ฐ๎„ฒ๎ˆก๎ˆ ๎€ƒ๎„ฒ๎ˆ˜๎ˆข๎€ƒ๎ˆ•๎ˆ“๎„ฏ๎„ฎ๎ˆข. ๎‡น๎ˆž๎€ƒ๎„ฒ๎ˆ ๎€ƒ๎ˆ๎ˆ’๎ˆ›๎ˆ ๎ˆข๎€ƒ๎„ฒ๎ˆ˜๎ˆข๎€ƒ๎ˆ•๎ˆ“๎„ฏ๎„ฎ๎ˆข
๎„ฐ๎ˆ“๎ˆž๎„ฎ๎ˆš๎€ƒ๎„ฎ๎ˆ›๎„ฎ๎„ฒ๎ˆ๎ˆœ๎ˆœ๎ˆ˜๎ˆœ๎ˆ , ๎„ฐ๎ŠŒ๎ˆš๎ˆœ๎ˆ‘๎ˆŸ๎„ฒ๎„ฐ๎€ƒ๎ˆ๎„ฐ๎ˆ–๎„ฎ๎ˆœ๎ˆช๎„ฒ๎„ฐ๎ˆก๎ˆ˜๎€ƒ๎ˆ•๎ˆ“๎„ฏ๎„ฎ.
๎‡ผ๎ŠŒ๎ˆš๎ˆœ๎ˆ‘๎ˆŸ๎„ฒ๎„ฐ๎€ƒ๎„ฒ๎ˆ˜๎€ƒ๎ˆ•๎ˆ“๎„ฏ๎„ฎ๎€ƒ๎ˆ๎ˆš๎ˆ›๎ˆก๎ˆฉ๎„ฒ๎„ฐ๎ˆก๎ˆ ๎ˆฃ๎€ƒ๎ˆ๎ˆ’๎ˆ›๎ˆ ๎ˆฃ๎ˆข๎€ƒ๎ŠŒ๎ˆ ๎ˆฃ๎€ƒ๎ˆ™๎„ฎ
๎ŠŒ๎ˆก๎ˆ ๎„ฐ๎ˆŸ๎ˆ‘๎ˆค๎„ฐ๎ˆš๎€ƒ๎„ฒ๎ˆ˜๎ˆž๎€ƒ๎„ฎ๎ŠŒ๎„ฎ๎ˆš๎„ฒ๎ˆ ๎ˆช๎ˆ๎„ฐ๎ˆž๎ˆ˜๎€ƒ๎„ฎ๎ŠŒ๎ˆฉ๎„ฑ๎„ฒ๎„ฎ๎„ฑ๎ˆ˜.
5. ๎ˆ‰๎ˆ ๎ŠŒ๎ˆ ๎ˆ™๎„ฐ๎„ฒ๎ˆ’๎„ฑ๎„ฒ๎„ฐ๎€ƒ๎„ฒ๎ˆ ๎ˆฃ๎ˆข๎€ƒ๎ˆ•๎ˆก๎„ฎ๎ˆค๎ˆ“๎ˆ ๎ˆž๎„ฐ๎ˆข (๎‡บ) ๎„ฑ๎„ฒ๎ˆ˜๎ˆž๎€ƒ๎ˆ ๎ˆ™๎ˆฉ๎ˆž๎ˆ˜,
๎„ฏ๎ˆš๎„ฎ๎„ฑ๎„ณ๎„ฎ๎ˆœ๎ˆ“๎ˆ—๎ˆ ๎ˆž๎„ฒ๎„ฎ๎ˆข๎€ƒ๎ˆฉ๎„ฒ๎ˆš:
โ€ข ๎ˆ‰๎„ฎ๎€ƒ๎ˆ๎ˆž๎ˆฆ๎€ƒ๎ˆ๎ˆ–๎ˆ›๎ˆš๎„ฑ๎„ฒ๎ˆก๎„ฎ๎€ƒ๎„ฐ๎ˆ“๎ˆž๎„ฎ๎ˆš๎€ƒ๎„ฑ๎„ฒ๎ˆก๎„ฎ๎ˆ๎ˆ๎ˆ‘๎ˆž๎„ฎ๎€ƒ๎ŠŒ๎ˆก๎ˆ ๎ˆข๎€ƒ๎„ฒ๎ˆ  ๎ŠŒ๎ˆ๎ˆž๎ˆฆ
๎ˆ๎ˆ‘๎ˆก๎ˆ ๎ˆข๎€ƒ๎„ฒ๎ˆ˜๎ˆข๎€ƒ๎ˆ ๎ˆ™๎ˆฉ๎ˆž๎ˆ˜๎ˆข.
โ€ข ๎ˆ‰๎ˆ ๎€ƒ๎ˆ›๎ˆ‘๎ˆž๎„ฒ๎ˆก๎ˆ ๎€ƒ๎„ฒ๎ˆฆ๎ˆž๎€ƒ๎ˆ•๎ˆก๎„ฎ๎ˆค๎ˆš๎ˆฉ๎ˆž๎ˆฆ๎ˆž (B) ๎„ฐ๎ˆ“๎ˆž๎„ฎ๎ˆš๎€ƒ๎ˆฉ๎„ฑ๎ˆ ๎€ƒ๎„ฒ๎ˆ ๎€ƒ๎„ฏ๎ˆฃ๎ˆž๎„ฎ๎„ฒ๎ˆฉ๎ˆž
๎ŠŒ๎ˆš๎ˆ ๎€ƒ๎ˆ›๎ˆ ๎ˆž๎„ฒ๎ˆ๎€ƒ๎„ฑ๎„ฒ๎ˆ ๎€ƒ๎ˆ›๎ˆ‘๎ˆž๎„ฒ๎ˆก๎ˆ ๎€ƒ๎„ฒ๎ˆ ๎ˆฃ๎€ƒ๎ŠŒ๎ˆ“๎„ฑ๎ˆฆ๎€ƒ๎ˆ๎ˆ‘๎ˆก๎ˆ ๎ˆฃ๎ˆข๎€ƒ๎„ฒ๎ˆ˜๎ˆข๎€ƒ๎ˆ ๎ˆ™๎ˆฉ๎ˆž๎ˆ˜๎ˆข
๎ˆ๎„ฐ๎„ฒ๎ˆ๎€ƒ๎„ฒ๎ˆ˜๎ˆž๎€ƒ๎„ฐ๎ˆ–๎ˆ›๎„ฎ๎„ฒ๎ˆ๎„ฑ๎„ฒ๎„ฎ๎„ฑ๎ˆ˜. ๎ˆ‰๎ˆ ๎€ƒ๎ˆ›๎ˆ‘๎ˆž๎„ฒ๎ˆก๎ˆ ๎€ƒ๎„ฒ๎ˆ ๎ˆฃ๎€ƒ๎ˆ•๎ˆก๎„ฎ๎ˆค๎ˆ“๎ˆ ๎ˆž๎„ฎ
๎ˆฃ๎ŠŒ๎ˆ ๎„ฏ๎„ฐ๎ˆš๎ˆ›๎ˆž๎ˆช๎„ฐ๎„ฒ๎„ฎ๎ˆš๎€ƒ๎ˆ๎„ฐ๎€ƒ๎„ฒ๎ˆ˜๎ˆž๎€ƒ๎ˆ ๎ŠŒ๎ˆ’๎€ƒ๎„ฑ๎„ฐ๎€ƒ๎„ฑ๎ˆค๎ˆ’๎ˆ๎„ฎ๎€ƒ๎ˆก๎ˆฉ๎ˆ๎ˆ•๎ˆ ๎ˆฃ.
6. ๎ˆ‹๎ˆก๎ˆ˜๎„ฑ๎ˆš๎ˆ๎ˆ ๎ŠŒ๎ˆ ๎ˆš๎ˆซ๎ˆž๎„ฒ๎„ฎ๎ˆข๎€ƒ๎ˆ‘๎ˆž๎„ฎ๎€ƒ๎ˆ›๎„ฎ๎„ฒ๎„ฑ๎„ฎ๎ˆ•๎ˆ“๎„ฏ๎ˆš Phillips, ๎„ฒ๎ˆ ๎ŠŒ๎ˆ ๎ˆ™๎„ฐ๎„ฒ๎ˆ’๎„ฑ๎„ฒ๎„ฐ
๎ŠŒ๎ˆก๎ˆ ๎„ฑ๎„ฐ๎ˆ›๎„ฒ๎ˆš๎ˆ›๎ˆ๎€ƒ๎„ฒ๎ˆš๎ˆข๎€ƒ๎„ฐ๎ŠŒ๎ˆš๎ˆœ๎„ฐ๎ˆ–๎ˆ๎ˆ‘๎ˆž๎„ฐ๎ˆข๎€ƒ๎ˆ•๎ˆ“๎„ฏ๎„ฐ๎ˆข๎€ƒ๎ˆ๎ˆ‘๎„ฑ๎ˆฆ๎€ƒ๎„ฒ๎ˆฆ๎ˆž๎€ƒ๎„ฏ๎„ฎ๎ˆ›๎„ฒ๎ˆฃ๎ˆœ๎ˆ“๎ˆฆ๎ˆž
๎ˆ–๎„ฐ๎ˆž๎ˆš๎ˆ›๎ˆ’๎ˆข๎€ƒ๎ˆค๎ˆก๎ˆ’๎„ฑ๎ˆ˜๎ˆข (FS), ๎„ฒ๎ˆฆ๎ˆž๎€ƒ๎ˆ•๎ˆก๎„ฎ๎ˆค๎ˆš๎ˆฉ๎ˆž๎ˆฆ๎ˆž (๎‡บ) ๎ˆ›๎„ฎ๎ˆš๎€ƒ๎„ฒ๎ˆฆ๎ˆž
๎„ฏ๎ˆš๎„ฎ๎ˆค๎ˆฆ๎ˆก๎ˆš๎„ฑ๎„ฒ๎ˆš๎ˆ›๎ˆซ๎ˆž (FP ๎ˆ’ FQ, ๎„ฎ๎ˆž๎€ƒ๎ˆค๎ˆก๎„ฐ๎ˆš๎ˆ๎ˆ—๎ˆ ๎ˆž๎„ฒ๎„ฎ๎ˆš), ๎„ฑ๎„ฒ๎ˆ˜๎ˆž๎€ƒ๎ˆ ๎ˆ™๎ˆฉ๎ˆž๎ˆ˜.
7. ๎‡บ๎ˆš๎„ฏ๎ˆซ๎„ฑ๎„ฒ๎„ฐ๎€ƒ๎ˆฉ๎ˆœ๎„ฐ๎ˆข๎€ƒ๎„ฒ๎ˆš๎ˆข๎€ƒ๎ˆ•๎ˆ“๎„ฏ๎„ฐ๎ˆข. ๎‡บ๎„ฐ๎ˆ•๎„ฎ๎ˆš๎ˆฆ๎ˆ™๎„ฐ๎ˆ“๎„ฒ๎„ฐ๎€ƒ๎ˆฉ๎„ฒ๎ˆš
๎ˆค๎ˆก๎ˆ˜๎„ฑ๎ˆš๎ˆ๎ˆ ๎ŠŒ๎ˆ ๎ˆš๎ˆ ๎ˆช๎ˆž๎„ฒ๎„ฎ๎ˆš๎€ƒ๎ˆฉ๎ˆœ๎„ฐ๎ˆข๎€ƒ๎ˆ ๎ˆš๎€ƒ๎„ฎ๎ŠŒ๎„ฎ๎ˆš๎„ฒ๎ˆ ๎ˆช๎ˆ๎„ฐ๎ˆž๎„ฐ๎ˆข๎€ƒ๎ˆ ๎ŠŒ๎ˆ‘๎ˆข
๎„ฑ๎„ฒ๎ˆ’๎ˆก๎ˆš๎ˆŸ๎ˆ˜๎ˆข๎€ƒ๎„ฒ๎ˆ˜๎ˆข๎€ƒ๎ˆ ๎ˆ™๎ˆฉ๎ˆž๎ˆ˜๎ˆข (4, 6 ๎ˆ’ 8).
2
2 4
6
5
6
2 4
5
๎€‹๎ˆ ๎ŠŒ๎ˆ‘๎ˆข๎€ƒ๎ˆค๎ˆฆ๎ˆก๎ˆ“๎ˆข๎€ƒ๎„ฐ๎„ฑ๎ˆ ๎ˆค๎ˆ‘๎ˆข)
(FS) x 4, x 6, x 8
(FS) x 4, x 6, x 8
3
(FA-FO) x 4, x 6, x 8
(B) x 2
(FA-FO) x 4, x 6, x 8
(FP ๎ˆ’ FQ)*
(B) x 2
๎€‹๎„ฎ๎ŠŒ๎„ฎ๎ˆš๎„ฒ๎ˆ ๎ˆช๎ˆž๎„ฒ๎„ฎ๎ˆš๎€ƒ๎ˆ ๎ŠŒ๎ˆ‘๎ˆข๎€ƒ๎ˆ๎„ฐ๎€ƒ๎„ฐ๎„ฑ๎ˆ ๎ˆค๎ˆ‘๎ˆข
๎ˆ’๎€ƒ๎ŠŒ๎ˆก๎ˆฉ๎„ฑ๎ˆ™๎„ฐ๎„ฒ๎ˆ ๎€ƒ๎ˆ•๎ˆ๎ˆ™๎ˆ ๎ˆข)
๎€๎‡น๎ˆž๎€ƒ๎„ฎ๎ŠŒ๎„ฎ๎ˆš๎„ฒ๎„ฐ๎ˆ“๎„ฒ๎„ฎ๎ˆš๎€ƒ๎ŠŒ๎ˆก๎ˆฉ๎„ฑ๎ˆ™๎„ฐ๎„ฒ๎ˆ ๎€ƒ๎ˆ•๎ˆ๎ˆ™๎ˆ ๎ˆข, (FP ๎ˆ›๎„ฎ๎ˆš FQ)
๎ˆ๎ŠŒ๎ˆ ๎ˆก๎ˆ ๎ˆช๎ˆž๎€ƒ๎ˆž๎„ฎ๎€ƒ๎„ฒ๎ˆ ๎ŠŒ๎ˆ ๎ˆ™๎„ฐ๎„ฒ๎ˆ˜๎ˆ™๎ˆ ๎ˆช๎ˆž๎€ƒ๎„ฏ๎ˆš๎„ฎ๎ˆค๎ˆฆ๎ˆก๎ˆš๎„ฑ๎„ฒ๎ˆš๎ˆ›๎ˆ
๎„ฒ๎ˆ ๎€ƒ๎ˆ‘๎ˆž๎„ฎ๎€ƒ๎ŠŒ๎ˆ๎ˆž๎ˆฆ๎€ƒ๎„ฑ๎„ฒ๎ˆ ๎€ƒ๎ˆ๎ˆœ๎ˆœ๎ˆ 
๎ˆ…๎„ฏ๎ˆ˜๎ˆ–๎ˆ“๎„ฐ๎ˆข๎€ƒ๎„ฐ๎ˆ–๎ˆ›๎„ฎ๎„ฒ๎ˆ๎„ฑ๎„ฒ๎„ฎ๎„ฑ๎ˆ˜๎ˆข ๎ˆˆ๎„ฐ๎ˆš๎ˆก๎ˆ iC-PFM3
63
3
๎‡ผ๎„ซ๎ˆ€๎‡น๎ˆ‰๎‡น๎ˆˆ๎ˆ‰๎‡พ๎ˆˆ๎ˆ‰๎‡ผ๎€ƒ๎ˆ‰๎‡พ๎ˆƒ๎€ƒ๎ˆ…๎„ฌ๎ˆ…๎ˆƒ๎‡พ๎€ƒ๎ˆˆ๎ˆ‰๎‡พ๎ˆƒ
๎ˆ†๎ˆ๎‡น๎ˆ€๎‡น๎€ƒ๎ˆ‰๎ˆ…๎‡ฟ๎ˆ‹๎ˆ…๎ˆŠ
๎ˆ†๎ˆ‡๎ˆ…๎‡ผ๎‡ฟ๎‡ป๎ˆ…๎ˆ†๎ˆ…๎‡ฟ๎‡พ๎ˆˆ๎‡พ: ๎‡น๎ˆž๎€ƒ๎ˆฃ๎ŠŒ๎„ฐ๎ˆก๎ˆ•๎„ฐ๎ˆ“๎„ฒ๎„ฐ๎€ƒ๎„ฒ๎ˆ˜๎ˆž๎€ƒ๎ˆš๎ˆ›๎„ฎ๎ˆž๎ˆฉ๎„ฒ๎ˆ˜๎„ฒ๎„ฎ
๎ˆ•๎ˆ๎ˆก๎ˆ ๎ˆฃ๎ˆข๎€ƒ๎ˆฃ๎ŠŒ๎ˆ๎ˆก๎ˆค๎„ฐ๎ˆš๎€ƒ๎ˆ›๎ˆ“๎ˆž๎„ฏ๎ˆฃ๎ˆž๎ˆ ๎ˆข๎€ƒ๎ŠŒ๎ˆก๎ˆฉ๎ˆ›๎ˆœ๎ˆ˜๎„ฑ๎ˆ˜๎ˆข๎€ƒ๎„ฑ๎ˆ ๎ˆ•๎„ฎ๎ˆก๎ˆ ๎ˆช
๎„ฒ๎ˆก๎„ฎ๎ˆฃ๎ˆ๎„ฎ๎„ฒ๎ˆš๎„ฑ๎ˆ๎ˆ ๎ˆช๎€ƒ๎ˆ’๎€ƒ๎ˆ•๎ˆœ๎ˆ๎ˆ•๎ˆ˜๎ˆข๎€ƒ๎„ฑ๎„ฒ๎ˆ ๎ˆž๎€ƒ๎„ฐ๎ˆŸ๎ˆ ๎ŠŒ๎ˆœ๎ˆš๎„ฑ๎ˆ๎ˆฉ! ๎‡น๎ŠŒ๎ˆ ๎„ฒ๎„ฐ๎ˆœ๎„ฐ๎ˆ“
๎„ฐ๎ˆฃ๎ˆ™๎ˆช๎ˆž๎ˆ˜๎€ƒ๎„ฒ๎ˆ ๎ˆฃ๎€ƒ๎ˆฃ๎ŠŒ๎„ฐ๎ˆช๎ˆ™๎ˆฃ๎ˆž๎ˆ ๎ˆฃ๎€ƒ๎„ฐ๎ˆ–๎ˆ›๎„ฎ๎„ฒ๎ˆ๎„ฑ๎„ฒ๎„ฎ๎„ฑ๎ˆ˜๎ˆข๎€ƒ๎ˆž๎„ฎ๎€ƒ๎ˆ•๎„ฐ๎ˆ•๎„ฎ๎ˆš๎ˆซ๎„ฑ๎„ฐ๎ˆš
๎ˆฉ๎„ฒ๎ˆš๎€ƒ๎„ฒ๎ˆ ๎€ƒ๎„ฑ๎ˆฃ๎ˆž๎„ฏ๎ˆฃ๎„ฎ๎„ฑ๎ˆ๎ˆ‘๎ˆž๎ˆ ๎€ƒ๎ˆ•๎ˆ๎ˆก๎ˆ ๎ˆข๎€ƒ๎ˆฉ๎ˆœ๎ˆฆ๎ˆž๎€ƒ๎„ฒ๎ˆฆ๎ˆž๎€ƒ๎„ฑ๎„ฒ๎ˆ ๎ˆš๎ˆค๎„ฐ๎ˆ“๎ˆฆ๎ˆž๎€ƒ๎ŠŒ๎ˆ ๎ˆฃ
๎ŠŒ๎ˆก๎ˆ ๎„ฑ๎„ฎ๎ˆก๎„ฒ๎ˆซ๎ˆž๎„ฒ๎„ฎ๎ˆš๎€ƒ๎„ฏ๎„ฐ๎ˆž๎€ƒ๎ˆฃ๎ŠŒ๎„ฐ๎ˆก๎ˆ•๎„ฎ๎ˆ“๎ˆž๎„ฐ๎ˆš๎€ƒ๎„ฒ๎„ฎ 125 lbs (56.7 kg) ๎ˆ–๎ˆš๎„ฎ
๎„ฒ๎ˆ  iCMPFM3 ๎ˆ›๎„ฎ๎ˆš๎€ƒ๎„ฒ๎ˆ  iCLPFM3 ๎ˆ’๎€ƒ๎„ฒ๎„ฎ 175 lbs (79.4 kg)
๎ˆ–๎ˆš๎„ฎ๎€ƒ๎„ฒ๎ˆ  iCXPFM3. ๎‡พ๎€ƒ๎ˆค๎ˆก๎ˆ’๎„ฑ๎ˆ˜๎€ƒ๎ˆ๎„ฐ๎€ƒ๎ŠŒ๎ˆก๎ˆ ๎ˆง๎ˆฉ๎ˆž๎„ฒ๎„ฎ๎€ƒ๎ˆ๎„ฐ๎ˆ–๎„ฎ๎ˆœ๎ˆช๎„ฒ๎„ฐ๎ˆก๎ˆ ๎ˆฃ
๎ˆ•๎ˆ๎ˆก๎ˆ ๎ˆฃ๎ˆข๎€ƒ๎„ฎ๎ŠŒ๎ˆฉ๎€ƒ๎„ฒ๎ˆ ๎€ƒ๎ˆ๎ˆ‘๎ˆ–๎ˆš๎„ฑ๎„ฒ๎ˆ ๎€ƒ๎ˆ•๎ˆ๎ˆก๎ˆ ๎ˆข๎€ƒ๎ŠŒ๎ˆ ๎ˆฃ๎€ƒ๎„ฎ๎ˆž๎„ฎ๎„ณ๎ˆ‘๎ˆก๎„ฐ๎„ฒ๎„ฎ๎ˆš
๎ˆ๎ŠŒ๎ˆ ๎ˆก๎„ฐ๎ˆ“๎€ƒ๎ˆž๎„ฎ๎€ƒ๎ŠŒ๎ˆก๎ˆ ๎ˆ›๎„ฎ๎ˆœ๎ˆ‘๎„ฑ๎„ฐ๎ˆš๎€ƒ๎ŠŒ๎„ฒ๎ˆซ๎„ฑ๎ˆ˜๎€ƒ๎„ฒ๎ˆ˜๎ˆข๎€ƒ๎ˆ•๎ˆ๎„ฑ๎ˆ˜๎ˆข๎€ƒ๎ˆ›๎„ฎ๎ˆš๎€ƒ๎„ฒ๎ˆฆ๎ˆž
๎„ฐ๎ˆŸ๎„ฎ๎ˆก๎„ฒ๎ˆ˜๎ˆ๎ˆ๎„ฒ๎ˆฆ๎ˆž๎€ƒ๎„ฒ๎ˆ˜๎ˆข๎€ƒ๎ŠŒ๎ˆก๎ˆ ๎ˆ›๎„ฎ๎ˆœ๎ˆซ๎ˆž๎„ฒ๎„ฎ๎ˆข๎€ƒ๎ŠŒ๎ˆš๎ˆ™๎„ฎ๎ˆž๎ˆฉ๎€ƒ๎„ฒ๎ˆก๎„ฎ๎ˆฃ๎ˆ๎„ฎ๎„ฒ๎ˆš๎„ฑ๎ˆ๎ˆฉ.
๎ˆ†๎ˆ‡๎ˆ…๎‡ผ๎‡ฟ๎‡ป๎ˆ…๎ˆ†๎ˆ…๎‡ฟ๎‡พ๎ˆˆ๎‡พ: ๎‡พ๎€ƒ๎ˆ ๎ˆ™๎ˆฉ๎ˆž๎ˆ˜๎€ƒ๎ˆ๎ŠŒ๎ˆ ๎ˆก๎„ฐ๎ˆ“๎€ƒ๎ˆž๎„ฎ๎€ƒ๎„ฐ๎ˆ“๎ˆž๎„ฎ๎ˆš๎€ƒ๎ŠŒ๎ˆ ๎ˆœ๎ˆช
๎ˆ•๎„ฎ๎ˆก๎ˆš๎ˆ! ๎‡บ๎„ฐ๎ˆ•๎„ฎ๎ˆš๎ˆฆ๎ˆ™๎„ฐ๎ˆ“๎„ฒ๎„ฐ๎€ƒ๎ˆฉ๎„ฒ๎ˆš๎€ƒ๎ˆ˜๎€ƒ๎ˆ ๎ˆ™๎ˆฉ๎ˆž๎ˆ˜๎€ƒ๎ˆ๎ŠŒ๎ˆ ๎ˆก๎„ฐ๎ˆ“๎€ƒ๎ˆž๎„ฎ๎€ƒ๎„ฎ๎ˆž๎ˆฃ๎ˆฅ๎ˆฆ๎ˆ™๎„ฐ๎ˆ“
๎ˆ›๎„ฎ๎ˆš๎€ƒ๎ˆž๎„ฎ๎€ƒ๎ˆ๎„ฐ๎„ฒ๎„ฎ๎ˆ›๎ˆš๎ˆž๎ˆ˜๎ˆ™๎„ฐ๎ˆ“๎€ƒ๎ˆ๎„ฐ๎€ƒ๎„ฎ๎„ฑ๎„ณ๎ˆ๎ˆœ๎„ฐ๎ˆš๎„ฎ๎€ƒ๎ˆ–๎ˆš๎„ฎ๎€ƒ๎„ฒ๎ˆ ๎ˆฃ๎ˆข๎€ƒ๎ˆค๎„ฐ๎ˆš๎ˆก๎ˆš๎„ฑ๎ˆ๎ˆ ๎ˆช๎ˆข
๎ŠŒ๎ˆ ๎ˆฃ๎€ƒ๎ˆค๎ˆก๎„ฐ๎ˆš๎ˆ๎ˆ—๎ˆ ๎ˆž๎„ฒ๎„ฎ๎ˆš๎€ƒ๎ŠŒ๎ˆก๎ˆ ๎ˆ›๎„ฐ๎ˆš๎ˆ๎ˆ‘๎ˆž๎ˆ ๎ˆฃ๎€ƒ๎ˆž๎„ฎ๎€ƒ๎„ฐ๎ˆ–๎ˆ›๎„ฎ๎„ฒ๎„ฎ๎„ฑ๎„ฒ๎„ฎ๎ˆ™๎„ฐ๎ˆ“๎€ƒ๎„ฑ๎„ฒ๎ˆ˜๎ˆž
๎ŠŒ๎ˆœ๎ˆ๎ˆ›๎„ฎ๎€ƒ๎„ฒ๎ˆ ๎ˆ“๎ˆค๎ˆ ๎ˆฃ. ๎‡น๎ˆž๎€ƒ๎„ฏ๎„ฐ๎ˆž๎€ƒ๎ˆœ๎ˆ๎ˆ•๎„ฐ๎„ฒ๎„ฐ๎€ƒ๎„ฒ๎ˆš๎ˆข๎€ƒ๎„ฎ๎ŠŒ๎„ฎ๎ˆก๎„ฎ๎ˆ“๎„ฒ๎ˆ˜๎„ฒ๎„ฐ๎ˆข
๎ŠŒ๎ˆก๎ˆ ๎„ณ๎ˆฃ๎ˆœ๎ˆ๎ˆŸ๎„ฐ๎ˆš๎ˆข, ๎ˆฃ๎ŠŒ๎ˆ๎ˆก๎ˆค๎„ฐ๎ˆš๎€ƒ๎ˆ›๎ˆ“๎ˆž๎„ฏ๎ˆฃ๎ˆž๎ˆ ๎ˆข๎€ƒ๎ŠŒ๎ˆก๎ˆฉ๎ˆ›๎ˆœ๎ˆ˜๎„ฑ๎ˆ˜๎ˆข๎€ƒ๎„ฑ๎ˆ ๎ˆ•๎„ฎ๎ˆก๎ˆ ๎ˆช
๎„ฒ๎ˆก๎„ฎ๎ˆฃ๎ˆ๎„ฎ๎„ฒ๎ˆš๎„ฑ๎ˆ๎ˆ ๎ˆช๎€ƒ๎ˆ’๎€ƒ๎ˆ•๎ˆœ๎ˆ๎ˆ•๎ˆ˜๎ˆข๎€ƒ๎„ฑ๎„ฒ๎ˆ ๎ˆž๎€ƒ๎„ฐ๎ˆŸ๎ˆ ๎ŠŒ๎ˆœ๎ˆš๎„ฑ๎ˆ๎ˆฉ!
๎ˆ†๎ˆ‡๎ˆ…๎‡ผ๎‡ฟ๎‡ป๎ˆ…๎ˆ†๎ˆ…๎‡ฟ๎‡พ๎ˆˆ๎‡พ: ๎ˆ…๎ˆš๎€ƒ๎ˆ•๎ˆก๎„ฎ๎ˆค๎ˆ“๎ˆ ๎ˆž๎„ฐ๎ˆข๎€ƒ๎„ฑ๎„ฒ๎ˆ’๎ˆก๎ˆš๎ˆŸ๎ˆ˜๎ˆข๎€ƒ๎ŠŒ๎ˆก๎ˆ‘๎ŠŒ๎„ฐ๎ˆš
๎ˆž๎„ฎ๎€ƒ๎„ฎ๎ˆž๎„ฎ๎ˆก๎„ฒ๎ˆ˜๎ˆ™๎ˆ ๎ˆช๎ˆž๎€ƒ๎„ฑ๎„ฒ๎ˆš๎ˆข๎€ƒ๎„ฏ๎ˆช๎ˆ ๎€ƒ๎ŠŒ๎ˆœ๎„ฐ๎ˆฃ๎ˆก๎ˆ‘๎ˆข๎€ƒ๎„ฒ๎ˆ˜๎ˆข๎€ƒ๎ˆ›๎„ฐ๎ˆž๎„ฒ๎ˆก๎ˆš๎ˆ›๎ˆ’๎ˆข
๎ŠŒ๎ˆก๎ˆ ๎„ฐ๎ˆŸ๎ˆ ๎ˆค๎ˆ’๎ˆข๎€ƒ๎„ฑ๎„ฒ๎ˆ˜๎ˆž๎€ƒ๎ŠŒ๎ˆœ๎ˆ๎ˆ›๎„ฎ๎€ƒ๎„ฒ๎ˆ ๎ˆ“๎ˆค๎ˆ ๎ˆฃ!
1. ๎„ญ๎ˆก๎ˆ ๎ˆž๎„ฒ๎ˆ“๎„ฑ๎„ฒ๎„ฐ๎€ƒ๎ˆ ๎ˆš๎€ƒ๎ˆ•๎ˆก๎„ฎ๎ˆค๎ˆ“๎ˆ ๎ˆž๎„ฐ๎ˆข๎€ƒ๎„ฑ๎„ฒ๎ˆ’๎ˆก๎ˆš๎ˆŸ๎ˆ˜๎ˆข๎€ƒ๎ˆž๎„ฎ๎€ƒ๎ˆ•๎ˆก๎ˆ“๎„ฑ๎ˆ›๎ˆ ๎ˆž๎„ฒ๎„ฎ๎ˆš๎€ƒ๎„ฑ๎„ฒ๎ˆ˜
๎ˆ™๎ˆ‘๎„ฑ๎ˆ˜๎€ƒ๎„ฒ๎ˆ ๎ˆฃ stand ๎„ฑ๎„ฒ๎ˆ’๎ˆก๎ˆš๎ˆŸ๎ˆ˜๎ˆข๎€ƒ๎„ฒ๎ˆก๎„ฎ๎ˆ•๎ˆซ๎ˆž๎„ฒ๎„ฎ๎ˆข๎€ƒ๎„ฒ๎ˆš๎ˆข๎€ƒ๎ˆœ๎„ฎ๎ˆ•๎ˆ‘๎ˆข๎€ƒ๎ŠŒ๎ˆก๎ˆ ๎ˆข
๎„ฒ๎„ฎ๎€ƒ๎ˆ›๎ˆ๎„ฒ๎ˆฆ๎€ƒ๎ˆฉ๎„ฑ๎ˆ ๎€ƒ๎„ฒ๎ˆ ๎€ƒ๎„ฏ๎ˆฃ๎ˆž๎„ฎ๎„ฒ๎ˆฉ๎ˆž๎€ƒ๎ŠŒ๎„ฐ๎ˆก๎ˆš๎„ฑ๎„ฑ๎ˆฉ๎„ฒ๎„ฐ๎ˆก๎ˆ .
2. ๎‡น๎ˆž๎„ฎ๎ˆก๎„ฒ๎ˆ’๎„ฑ๎„ฒ๎„ฐ๎€ƒ๎„ฒ๎ˆ˜๎ˆž๎€ƒ๎ˆ ๎ˆ™๎ˆฉ๎ˆž๎ˆ˜๎€ƒ๎ˆ๎„ฐ๎€ƒ๎„ฒ๎ˆ ๎ˆฃ๎ˆข๎€ƒ๎ˆ•๎ˆก๎„ฎ๎ˆค๎ˆ“๎ˆ ๎ˆž๎„ฐ๎ˆข ( ๎‡บ) ๎„ฎ๎ŠŒ๎ˆฉ๎€ƒ๎„ฒ๎ˆ˜๎ˆž
๎ˆ๎ˆž๎ˆฆ๎€ƒ๎ˆก๎ˆ๎ˆ•๎„ฏ๎ˆ ๎€ƒ๎„ฒ๎ˆ˜๎ˆข๎€ƒ๎ŠŒ๎ˆœ๎ˆ๎ˆ›๎„ฎ๎ˆข๎€ƒ๎„ฒ๎ˆ ๎ˆ“๎ˆค๎ˆ ๎ˆฃ (๎‡น). ๎ˆ‰๎ˆ  stand
๎„ฑ๎„ฒ๎ˆ’๎ˆก๎ˆš๎ˆŸ๎ˆ˜๎ˆข๎€ƒ๎ŠŒ๎ˆก๎ˆ‘๎ŠŒ๎„ฐ๎ˆš๎€ƒ๎ˆž๎„ฎ๎€ƒ๎„ฐ๎ˆ“๎ˆž๎„ฎ๎ˆš๎€ƒ๎„ฏ๎„ฐ๎„ฑ๎ˆ๎„ฐ๎ˆฃ๎ˆ๎ˆ‘๎ˆž๎ˆ ๎€ƒ๎ˆ๎„ฐ๎€ƒ๎„ฒ๎ˆ ๎€ƒ๎ˆ›๎ˆ๎„ฒ๎ˆฆ
๎ˆ๎ˆ‘๎ˆก๎ˆ ๎ˆข๎€ƒ๎„ฒ๎ˆ˜๎ˆข๎€ƒ๎ŠŒ๎ˆœ๎ˆ๎ˆ›๎„ฎ๎ˆข๎€ƒ๎„ฒ๎ˆ ๎ˆ“๎ˆค๎ˆ ๎ˆฃ.
๎ˆˆ๎‡พ๎ˆ‚๎‡ผ๎‡ฟ๎ˆ๎ˆˆ๎‡พ: ๎‡พ๎€ƒ๎„ฏ๎ˆš๎„ฎ๎ˆค๎„ฐ๎ˆ“๎ˆก๎ˆš๎„ฑ๎ˆ˜๎€ƒ๎„ฒ๎ˆฆ๎ˆž๎€ƒ๎ˆ›๎„ฎ๎ˆœ๎ˆฆ๎„ฏ๎ˆ“๎ˆฆ๎ˆž๎€ƒ๎ˆ’๎€ƒ๎„ฒ๎ˆฃ๎ˆค๎ˆฉ๎ˆž
๎ŠŒ๎ˆก๎ˆ ๎„ฑ๎„ฎ๎ˆก๎ˆ๎ˆ ๎ˆ–๎ˆ‘๎ˆข๎€ƒ๎„ฑ๎„ฒ๎ˆ ๎€ƒ๎ŠŒ๎ˆ“๎„ฑ๎ˆฆ๎€ƒ๎ˆ๎ˆ‘๎ˆก๎ˆ ๎ˆข๎€ƒ๎„ฒ๎ˆ˜๎ˆข
๎ˆ ๎ˆ™๎ˆฉ๎ˆž๎ˆ˜๎ˆข๎€ƒ๎ŠŒ๎ˆก๎ˆ‘๎ŠŒ๎„ฐ๎ˆš๎€ƒ๎ˆž๎„ฎ๎€ƒ๎ˆ–๎ˆ“๎ˆž๎ˆ ๎ˆž๎„ฒ๎„ฎ๎ˆš๎€ƒ๎ˆฉ๎„ฒ๎„ฎ๎ˆž๎€ƒ๎ˆ˜๎€ƒ๎ˆ ๎ˆ™๎ˆฉ๎ˆž๎ˆ˜
๎„ฎ๎ˆ›๎ˆ ๎ˆฃ๎ˆ๎ŠŒ๎ˆ๎„ฐ๎ˆš๎€ƒ๎„ฑ๎„ฒ๎ˆ  stand ๎„ฑ๎„ฒ๎ˆ’๎ˆก๎ˆš๎ˆŸ๎ˆ˜๎ˆข.
3. ๎‡น๎ŠŒ๎„ฎ๎„ฑ๎„ณ๎„ฎ๎ˆœ๎ˆ“๎„ฑ๎„ฒ๎„ฐ๎€ƒ๎„ฒ๎ˆ  stand ๎„ฑ๎„ฒ๎ˆ’๎ˆก๎ˆš๎ˆŸ๎ˆ˜๎ˆข๎€ƒ๎„ฑ๎ŠŒ๎ˆก๎ˆซ๎ˆค๎ˆž๎ˆ ๎ˆž๎„ฒ๎„ฎ๎ˆข๎€ƒ๎ŠŒ๎ˆก๎ˆ ๎ˆข
๎„ฒ๎„ฎ๎€ƒ๎„ฐ๎ŠŒ๎ˆ๎ˆž๎ˆฆ๎€ƒ๎„ฒ๎ˆ ๎ˆฃ๎ˆข๎€ƒ๎ˆ•๎ˆก๎„ฎ๎ˆค๎ˆ“๎ˆ ๎ˆž๎„ฐ๎ˆข๎€ƒ๎„ฑ๎„ฒ๎ˆ’๎ˆก๎ˆš๎ˆŸ๎ˆ˜๎ˆข๎€ƒ๎ˆ๎ˆ‘๎ˆค๎ˆก๎ˆš๎€ƒ๎„ฒ๎ˆ  stand
๎„ฑ๎„ฒ๎ˆ’๎ˆก๎ˆš๎ˆŸ๎ˆ˜๎ˆข๎€ƒ๎ˆž๎„ฎ๎€ƒ๎„ฎ๎ˆ›๎ˆ ๎ˆฃ๎ˆ๎ŠŒ๎ˆ๎„ฐ๎ˆš๎€ƒ๎„ฑ๎„ฒ๎ˆ ๎ˆž๎€ƒ๎„ฒ๎ˆ ๎ˆ“๎ˆค๎ˆ .
4. ๎ˆˆ๎ŠŒ๎ˆก๎ˆซ๎ˆŸ๎„ฒ๎„ฐ๎€ƒ๎„ฎ๎ˆ›๎ˆฉ๎ˆ๎ˆ˜๎€ƒ๎ŠŒ๎„ฐ๎ˆก๎ˆš๎„ฑ๎„ฑ๎ˆฉ๎„ฒ๎„ฐ๎ˆก๎ˆ ๎€ƒ๎„ฒ๎ˆ ๎ˆฃ๎ˆข๎€ƒ๎ˆ•๎ˆก๎„ฎ๎ˆค๎ˆ“๎ˆ ๎ˆž๎„ฐ๎ˆข
๎„ฑ๎„ฒ๎ˆ’๎ˆก๎ˆš๎ˆŸ๎ˆ˜๎ˆข๎€ƒ๎ˆ–๎ˆš๎„ฎ๎€ƒ๎ˆž๎„ฎ๎€ƒ๎„ฎ๎„ฑ๎„ณ๎„ฎ๎ˆœ๎ˆ“๎„ฑ๎„ฐ๎ˆš๎€ƒ๎ˆ˜๎€ƒ๎ˆ ๎ˆ™๎ˆฉ๎ˆž๎ˆ˜๎€ƒ๎„ฑ๎„ฒ๎ˆ˜๎€ƒ๎ˆ™๎ˆ‘๎„ฑ๎ˆ˜๎€ƒ๎„ฒ๎ˆ˜๎ˆข
๎„ฎ๎ˆ›๎ˆ ๎ˆฃ๎ˆ๎ŠŒ๎ˆซ๎ˆž๎„ฒ๎„ฎ๎ˆข๎€ƒ๎„ฒ๎ˆ ๎ˆž๎€ƒ๎„ฒ๎ˆ ๎ˆ“๎ˆค๎ˆ .
5. ๎ˆ‰๎ˆ ๎ˆฃ๎ˆข๎€ƒ๎ˆš๎ˆ๎ˆ๎ˆž๎„ฒ๎„ฐ๎ˆข๎€ƒ๎ˆ๎ŠŒ๎ˆ ๎ˆก๎„ฐ๎ˆ“๎„ฒ๎„ฐ๎€ƒ๎ˆž๎„ฎ๎€ƒ๎„ฒ๎ˆ ๎ˆฃ๎ˆข๎€ƒ๎ˆ›๎ˆก๎ˆช๎ˆฅ๎„ฐ๎„ฒ๎„ฐ๎€ƒ๎ŠŒ๎ˆ“๎„ฑ๎ˆฆ๎€ƒ๎„ฎ๎ŠŒ๎ˆฉ
๎„ฒ๎ˆ˜๎ˆž๎€ƒ๎ˆ ๎ˆ™๎ˆฉ๎ˆž๎ˆ˜๎€ƒ๎„ฑ๎„ฒ๎ˆ˜๎ˆž๎€ƒ๎„ฐ๎ˆ–๎ˆ›๎ˆ ๎ŠŒ๎ˆ’๎€ƒ๎„ฑ๎„ฒ๎ˆ ๎ˆฃ๎ˆข๎€ƒ๎ˆ•๎ˆก๎„ฎ๎ˆค๎ˆ“๎ˆ ๎ˆž๎„ฐ๎ˆข๎€ƒ๎„ฑ๎„ฒ๎ˆ’๎ˆก๎ˆš๎ˆŸ๎ˆ˜๎ˆข
๎€‹๎‡บ) ๎ˆ๎„ฐ๎„ฒ๎ˆ๎€ƒ๎„ฒ๎ˆ˜๎ˆž๎€ƒ๎ˆ ๎ˆœ๎ˆ ๎ˆ›๎ˆœ๎ˆ’๎ˆก๎ˆฆ๎„ฑ๎ˆ˜๎€ƒ๎„ฒ๎ˆ˜๎ˆข๎€ƒ๎„ฐ๎ˆ–๎ˆ›๎„ฎ๎„ฒ๎ˆ๎„ฑ๎„ฒ๎„ฎ๎„ฑ๎ˆ˜๎ˆข๎€ƒ๎ˆซ๎„ฑ๎„ฒ๎„ฐ
๎ˆž๎„ฎ๎€ƒ๎ˆ๎ˆ˜๎ˆž๎€ƒ๎„ฐ๎ˆ“๎ˆž๎„ฎ๎ˆš๎€ƒ๎ˆ ๎ˆก๎„ฎ๎„ฒ๎ˆ ๎ˆ“๎€ƒ๎„ฑ๎„ฒ๎ˆ ๎€ƒ๎ˆ™๎„ฐ๎„ฎ๎„ฒ๎ˆ’.
6. (๎ˆ†๎ˆก๎ˆ ๎„ฎ๎ˆš๎ˆก๎„ฐ๎„ฒ๎ˆš๎ˆ›๎ˆฉ) ๎ˆ†๎„ฐ๎ˆก๎ˆ๎„ฑ๎„ฒ๎„ฐ๎€ƒ๎„ฒ๎ˆ˜๎ˆž๎€ƒ๎ˆ›๎ˆœ๎„ฐ๎ˆš๎„ฏ๎„ฎ๎ˆก๎ˆš๎ˆ๎€ƒ๎ˆ’๎€ƒ๎ˆ›๎ˆœ๎„ฐ๎ˆš๎„ฏ๎„ฎ๎ˆก๎ˆš๎ˆ
๎„ฑ๎ˆฃ๎ˆก๎ˆ๎„ฎ๎„ฒ๎ˆฉ๎„ฑ๎ˆค๎ˆ ๎ˆš๎ˆž๎ˆ ๎ˆฃ (๎„ฏ๎„ฐ๎ˆž๎€ƒ๎ŠŒ๎„ฐ๎ˆก๎ˆš๎ˆœ๎„ฎ๎ˆ๎ˆ•๎ˆ๎ˆž๎„ฐ๎„ฒ๎„ฎ๎ˆš) ๎ˆ๎ˆ‘๎„ฑ๎„ฎ๎€ƒ๎„ฎ๎ŠŒ๎ˆฉ๎€ƒ๎„ฒ๎ˆš๎ˆข
๎ˆ›๎ˆ๎„ฒ๎ˆฆ๎€ƒ๎ˆ ๎ŠŒ๎ˆ‘๎ˆข๎€ƒ๎„ฑ๎„ฒ๎ˆ ๎€ƒ๎ˆ•๎ˆก๎„ฎ๎ˆค๎ˆ“๎ˆ ๎ˆž๎„ฎ๎€ƒ๎„ฑ๎„ฒ๎ˆ’๎ˆก๎ˆš๎ˆŸ๎ˆ˜๎ˆข๎€ƒ๎ˆ–๎ˆš๎„ฎ๎€ƒ๎ŠŒ๎ˆก๎ˆฉ๎„ฑ๎ˆ™๎„ฐ๎„ฒ๎ˆ˜
๎„ฎ๎„ฑ๎„ณ๎ˆ๎ˆœ๎„ฐ๎ˆš๎„ฎ.
๎€‹๎ˆ๎ŠŒ๎ˆ ๎ˆฅ๎ˆ˜๎€ƒ๎„ฎ๎ŠŒ๎ˆฉ๎€ƒ๎„ฒ๎ˆ˜๎ˆž๎€ƒ๎„ฎ๎ˆก๎ˆš๎„ฑ๎„ฒ๎„ฐ๎ˆก๎ˆ’๎€ƒ๎ŠŒ๎ˆœ๎„ฐ๎ˆฃ๎ˆก๎ˆ)
stand ๎„ฑ๎„ฒ๎ˆ’๎ˆก๎ˆš๎ˆŸ๎ˆ˜๎ˆข
1
2
๎„ฎ๎„ฑ๎„ณ๎„ฎ๎ˆœ๎ˆš๎„ฑ๎ˆ๎ˆ‘๎ˆž๎ˆ 
๎„ฎ๎„ฑ๎„ณ๎„ฎ๎ˆœ๎ˆš๎„ฑ๎ˆ๎ˆ‘๎ˆž๎ˆ˜
4
3
๎ˆ ๎ˆš๎€ƒ๎ˆ•๎ˆก๎„ฎ๎ˆค๎ˆ“๎ˆ ๎ˆž๎„ฐ๎ˆข
6
๎„ฑ๎„ฒ๎ˆ’๎ˆก๎ˆš๎ˆŸ๎ˆ˜๎ˆข๎€ƒ๎ŠŒ๎ˆก๎ˆ‘๎ŠŒ๎„ฐ๎ˆš
๎ˆž๎„ฎ๎€ƒ๎„ฎ๎ˆž๎„ฎ๎ˆก๎„ฒ๎ˆ˜๎ˆ™๎ˆ ๎ˆช๎ˆž
๎„ฑ๎„ฒ๎ˆš๎ˆข๎€ƒ๎„ฏ๎ˆช๎ˆ ๎€ƒ๎ŠŒ๎ˆœ๎„ฐ๎ˆฃ๎ˆก๎ˆ‘๎ˆข
๎„ฒ๎ˆ˜๎ˆข๎€ƒ๎ˆ›๎„ฐ๎ˆž๎„ฒ๎ˆก๎ˆš๎ˆ›๎ˆ’๎ˆข
๎ŠŒ๎ˆก๎ˆ ๎„ฐ๎ˆŸ๎ˆ ๎ˆค๎ˆ’๎ˆข
stand ๎„ฑ๎„ฒ๎ˆ’๎ˆก๎ˆš๎ˆŸ๎ˆ˜๎ˆข
๎ŠŒ๎ˆ๎ˆž๎ˆฆ๎€ƒ๎„ฑ๎„ฒ๎ˆ ๎ˆž๎€ƒ๎„ฒ๎ˆ ๎ˆ“๎ˆค๎ˆ 
๎ˆ™๎ˆ‘๎„ฑ๎ˆ˜
๎ˆ›๎„ฐ๎ˆž๎„ฒ๎ˆก๎ˆš๎ˆ›๎ˆ’๎€ƒ๎ŠŒ๎ˆก๎ˆ ๎„ฐ๎ˆŸ๎ˆ ๎ˆค๎ˆ’
5
USA ยท 8401 Eagle Creek Parkway, Suite 700 ยท Savage, Minnesota 55378 ยท 800.572.1373
EMEA ยท +31 (0)40 2668620
www.icmounts.com
ยฉ2011 Milestone AV Technologies. The iC Logo and StowAway are trademarks of Chief Manufacturing,
a products division of Milestone AV Technologies, a Duchossois Group Company. All rights reserved
Patents and patents pending. Milestone AV Technologies, Savage, MN 55378, USA
8800-002049 Rev 02
09/11
/