2. Paulmann
  3. 48181

Paulmann 48181 Installation guide

  • I have reviewed the provided user manual for the solar light. It details the charging process, operation, and battery replacement. The light is designed to charge using solar power and features automatic night illumination. I can answer any questions regarding these instructions to help you understand your device.
  • How long does the solar light need to charge before first use?
    How long can the solar light illuminate after a full charge?
    How can I verify if the light is on?
    What type of battery is used in the device?
STEP 1. Charge the solar light by placing it under direct sunlight for at least 8 hours.
STEP 2. Push the switch button down and the solar light will automatically charge under direct
sunlight during the day time and illuminate at night.
NOTE: In order to verify that the light is on or not, cover the solar panel with your hand and light
will turn on automatically.
Please allow the battery to charge at least 8-12 hours before first use.It can light 6-8 hours.
CHARGING AND OPERATION:
Battery replacement
STEP 1 STEP 2 cover the solar panel with your hand
and light will turn on automatically.
only use rechargeable
1x NiMH Battery (1.2V 600mAH)
/