2. RCA
  3. DTC-210 Supplement
DTC-210 Supplement

RCA DTC-210 Supplement, DTC210 Owner's manual

  • Hello, I've reviewed the document for the HD Receiver, which provides instructions on adjusting screen settings to resolve picture quality problems when using a plasma or RGB monitor connected via RGB input. The document advises to check screen timing settings, often labeled as 'HD Select', in the monitor menu and also gives hints about adjustment of the Monitor Setup option in the HD Receiver menu. I am ready to assist with any questions you have regarding the described troubleshooting steps.
  • What should I do if the picture is streaking or dark when using an RGB connection?
    Where can I find the screen timing setting?
    What if changing monitor settings doesn't fix the problem?
Attention Plasma/RGB Monitor Owners
If you used the RGB input jack on the back of your monitor to connect the HD Receiver, and you notice picture
streaking or darkness while watching the HD Receiver on your monitor, you might be able to correct your picture
by changing a screen setting on your plasma or RGB monitor.
In the monitor’s menu system, nd the option for screen timing—this option is sometimes called “HD Select.”
Then, experiment with the settings available for this option to nd the one that produces the best picture from
your HD Receiver.
If adjusting your monitor’s settings doesn’t correct the problem, try making a slight left or right adjustment to the
Monitor Setup option in your HD Receiver’s menu system. For more information, see Centering the DIRECTV® HD
Receiver’s picture on page 66 of the HD Receiver’s User’s Manual.
TOCOM 16399190
Attention Plasma/RGB Monitor Owners
If you used the RGB input jack on the back of your monitor to connect the HD Receiver, and you notice picture
streaking or darkness while watching the HD Receiver on your monitor, you might be able to correct your picture
by changing a screen setting on your plasma or RGB monitor.
In the monitor’s menu system, nd the option for screen timing—this option is sometimes called “HD Select.”
Then, experiment with the settings available for this option to nd the one that produces the best picture from
your HD Receiver.
If adjusting your monitor’s settings doesn’t correct the problem, try making a slight left or right adjustment to the
Monitor Setup option in your HD Receiver’s menu system. For more information, see Centering the DIRECTV® HD
Receiver’s picture on page 66 of the HD Receiver’s User’s Manual.
TOCOM 16399190
Attention Plasma/RGB Monitor Owners
If you used the RGB input jack on the back of your monitor to connect the HD Receiver, and you notice picture
streaking or darkness while watching the HD Receiver on your monitor, you might be able to correct your picture
by changing a screen setting on your plasma or RGB monitor.
In the monitor’s menu system, nd the option for screen timing—this option is sometimes called “HD Select.”
Then, experiment with the settings available for this option to nd the one that produces the best picture from
your HD Receiver.
If adjusting your monitor’s settings doesn’t correct the problem, try making a slight left or right adjustment to the
Monitor Setup option in your HD Receiver’s menu system. For more information, see Centering the DIRECTV® HD
Receiver’s picture on page 66 of the HD Receiver’s User’s Manual.
TOCOM 16399190
/