GOAT Tank Elite GUIDE
It is crucial that purchaser test these products in
their specific application to determine
appropriateness. The installation and operation of
these components is the sole responsibility of the
original purchaser. GOAT TANK will not be
responsible for the misuse of this product, failure
of the original purchaser to service this product or
use of this product in a manner inconsistent with
its intended purpose COULD RESULT IN FIRE,
EXPLOSION, SERIOUS INJURY, OR DEATH.
Tools and Materials
• Safety glasses
• Tape measure
• Crescent Wrench
• Punch
• Mallet
• Power Drill
• 1/4” Drill Bit
• 1/2” Drill Bit
• 1” Hole Saw (optional)
Do not put fuel into tank until
install is completely finished.
Fuel may spill causing
hazardous conditions during
your installation.
FOR COMPLETE INSTALLATION GUIDE SCAN THIS CODE OR VISIT: goattank.com/installation
Get Going With GOAT Tank Elite!
Contact Info:
info@goattank.com
951-685-8602
To activate your warranty on your GOAT Tank
visit https://goattank.com/register/
Locate the fuel station control panel, dispensing hose and nozzle:
• After being INACTIVE, the control panel will be in Sleep/Locked Mode
• Lights on the control panel are not lit up (sleep mode).
• ON/OFF buttons are not functional.
WAKE control panel, press “ON” or “OFF” button.
• Control panel will display fuel level(s).
UNLOCK control panel, hold “OFF” button down until
“ON” button begins to blink.
Press “ON” button to activate pump, dispense fuel.
• Use Hose and Nozzle to dispense fuel.
When finished refueling, press “OFF” button.
• Pump will automatically go into reverse mode for 10 seconds
returning undispensed fuel in dispensing hose and nozzle to the tank.
Control panel will revert to Sleep/Locked Mode after
2 minutes of inactivity.
01
02
03
04
05
06
Quick Start Guide FUEL STATION
/