Gigabyte TRX40 DESIGNARE Owner's manual

Category
Server/workstation motherboards
Type
Owner's manual
TRX40 DESIGNARE
User's Manual
Rev. 1301
12ME-TR4DES-1301R
For more product details, please visit GIGABYTE's website.
To reduce the impacts on global warming, the packaging materials of this product are
recyclable and reusable. GIGABYTE works with you to protect the environment.
Copyright
© 2021 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved.
The trademarks mentioned in this manual are legally registered to their respective owners.
Disclaimer
Information in this manual is protected by copyright laws and is the property of GIGABYTE.
Changes to the speciî‚¿cations and features in this manual may be made by GIGABYTE
without prior notice. No part of this manual may be reproduced, copied, translated, transmit-
ted, or published in any form or by any means without GIGABYTE's prior written permission.
Documentation Classications
In order to assist in the use of this product, GIGABYTE provides the following types of docu-
mentations:
î‚„For quick set-up of the product, read the Quick Installation Guide included with the product.
î‚„For detailed product information, carefully read the User's Manual.
For product-related information, check on our website at: https://www.gigabyte.com
Identifying Your Motherboard Revision
The revision number on your motherboard looks like this: "REV: X.X." For example, "REV: 1.0"
means the revision of the motherboard is 1.0. Check your motherboard revision before
updating motherboard BIOS, drivers, or when looking for technical information.
Example:
- 3 -
Table of Contents
Box Contents ................................................................................................................... 5
Optional Items .................................................................................................................5
TRX40 DESIGNARE Motherboard Layout .....................................................................6
TRX40 DESIGNARE Motherboard Block Diagram.........................................................7
Chapter 1 Hardware Installation .....................................................................................9
1-1 Installation Precautions ................................................................................... 9
1-2 Product Speciî‚¿cations ................................................................................... 10
1-3 Installing the CPU and CPU Cooler............................................................... 13
1-3-1 Installing the CPU .................................................................................................13
1-3-2 Installing the CPU Cooler ......................................................................................16
1-4 Installing the Memory .................................................................................... 17
1-4-1 Quad Channel Memory Conî‚¿guration ...................................................................17
1-4-2 Installing a Memory ................................................................................................18
1-5 Installing an Expansion Card ......................................................................... 19
1-6 Setting up AMD CrossFire™/NVIDIA® SLI™ Conguration ............................. 20
1-7 Back Panel Connectors ................................................................................. 21
1-8 Onboard LEDs and Buttons ........................................................................... 23
1-9 Internal Connectors ....................................................................................... 24
Chapter 2 BIOS Setup ..................................................................................................37
2-1 Startup Screen ............................................................................................... 38
2-2 The Main Menu .............................................................................................. 39
2-3 Favorites (F11) ............................................................................................... 41
2-4 Tweaker .......................................................................................................... 42
2-5 Settings .......................................................................................................... 46
2-6 System Info. ................................................................................................... 55
2-7 Boot ................................................................................................................ 56
2-8 Save & Exit .................................................................................................... 59
Chapter 3 Conî‚¿guring a RAID Set ...............................................................................61
3-1 Conî‚¿guring SATA Controllers ........................................................................ 61
3-2 Installing the SATA RAID/AHCI Driver and Operating System ..................... 66
- 4 -
Chapter 4 Drivers Installation .......................................................................................69
4-1 Drivers & Software ......................................................................................... 69
4-2 Application Software ...................................................................................... 70
4-3 Information ..................................................................................................... 70
Chapter 5 Unique Features...........................................................................................71
5-1 BIOS Update Utilities ..................................................................................... 71
5-1-1 Updating the BIOS with the Q-Flash Utility ........................................................... 71
5-1-2 Updating the BIOS with the @BIOS Utility ............................................................74
5-1-3 Using Q-Flash Plus ................................................................................................75
5-2 APP Center .................................................................................................... 76
5-2-1 AutoGreen ..............................................................................................................77
5-2-2 Cloud Station .........................................................................................................78
5-2-3 EasyTune ............................................................................................................... 83
5-2-4 Fast Boot ............................................................................................................... 84
5-2-5 Game Boost .......................................................................................................... 85
5-2-6 RGB Fusion ........................................................................................................... 86
5-2-7 Smart Keyboard .................................................................................................... 88
5-2-8 Smart Backup ....................................................................................................... 89
5-2-9 System Information Viewer ....................................................................................91
5-2-10 Smart Survey .........................................................................................................92
5-2-11 USB Blocker ...........................................................................................................93
5-2-12 USB TurboCharger ............................................................................................... 94
Chapter 6 Appendix ......................................................................................................95
6-1 Conî‚¿guring Audio Input and Output .............................................................. 95
6-1-1 Conî‚¿guring 2/4/5.1/7.1-Channel Audio ................................................................. 95
6-1-2 Conî‚¿guring S/PDIF Out .........................................................................................97
6-1-3 Stereo Mix ............................................................................................................. 98
6-1-4 Using the Voice Recorder ..................................................................................... 99
6-1-5 DTS:X® Ultra ........................................................................................................ 100
6-2 Troubleshooting ........................................................................................... 102
6-2-1 Frequently Asked Questions ...............................................................................102
6-2-2 Troubleshooting Procedure .................................................................................103
6-3 Debug LED Codes ....................................................................................... 105
Regulatory Notices ................................................................................................. 109
Contact Us ...............................................................................................................112
- 5 -
Box Contents
5TRX40 DESIGNARE motherboard
5Motherboard driver disc
5User's Manual
5Quick Installation Guide
5One AORUS Gen4 AIC Adaptor (GC-4XM2G4)
5One GC-TITAN RIDGE Add-in Card
5One Wi-Fi antenna
5Four SATA cables
5One addressable LED strip adapter cable
5One RGB LED strip extension cable
5Two thermistor cables
5One G Connector
5M.2 screw(s)/M.2 standoff(s)
Optional Items
2-port USB 2.0 bracket (Part No. 12CR1-1UB030-6*R)
eSATA bracket (Part No. 12CF1-3SATPW-4*R)
3.5" Front Panel with 2 USB 3.2 Gen 1 ports (Part No. 12CR1-FPX582-2*R)
The box contents above are for reference only and the actual items shall depend on the product package
you obtain. The box contents are subject to change without notice.
- 6 -
TRX40 DESIGNARE Motherboard Layout
REAR_BUTTON
USB20
U32G2
U32G2C
USB32G2_LAN1
M2_WIFI
CPU_FAN
PW_SW
RST_SW
D_LED2
SYS_FAN6A_PUMPDB_PORT (Note)
SYS_FAN6B_PUMP
OC_PEG
LED_C2
EC_TEMP2
EC_TEMP1
AMD Socket sTRX4
ATX
AUDIO BAT
ATX_12V2 ATX_12V1
AMD TRX40
CLR_CMOS
M_BIOS
B_BIOS
PCIEX16_1
PCIEX8_1
PCIEX1
PCIEX16_2
PCIEX8_2
CPU_OPT
DDR4_D2
DDR4_A1
DDR4_D1
DDR4_A2
DDR4_C2
DDR4_B1
DDR4_C1
DDR4_B2
TRX40 DESIGNARE
F_PANEL
SYS_FAN5A_
PUMP
F_USB32_1F_USB32_2F_USB20_1D_LED1 TPM SYS_FAN2
F_U32C
SYS_FAN5B_PUMP
F_USB20_2F_AUDIO LED_C1
iTE®
Super I/O
THB_C SATA3 6420
7531
M2M
6080110
M2Q
80
SYS_FAN1
USB 2.0 Hub
USB 2.0 Hub VGA
DRAM
CPU
BOOT
(Note) For debug code information, please refer to Chapter 6.
Intel® GbE
LAN
Intel® GbE
LAN
M2C
80
M2P
80 110
USB32G2_LAN2
CODEC
- 7 -
TRX40 DESIGNARE Motherboard Block Diagram
CPU CLK+/- (100~300 MHz)
DDR4 3200/2933/2667/2400/2133 MHz
PCI Express 4.0 Bus
PCIe 4.0
PCI Express x16_1
PCI Express x8_2
PCI Express x1
x16 x8 x4
PCI Express x16_2
x16
PCI Express x8_1
x8
2 M.2 Socket 3
(M2M/M2Q)
SPI
Bus
Dual BIOS
LPC
Bus
TPM
iTE®
Super I/O
AMD
Socket sTRX4
CPU
4 USB 3.2 Gen 2
x1 x1 x1
x1
8 SATA 6Gb/s
(SATA3 0~7)
4 USB 3.2 Gen 1
LAN1
RJ45
Intel® GbE
LAN
LAN2
RJ45
Intel® GbE
LAN
PCI Express 4.0 Bus AMD TRX40
2 M.2 Socket 3
(M2P/M2C)
2 USB Type-C®, with
USB 3.2 Gen 2 support
1 USB 3.2 Gen 2
6 USB 2.0/1.1 2 USB 2.0
Hub
M.2 WiFi
Module
Center/Subwoofer
Speaker Out
Line Out
MIC
Line In
S/PDIF Out
Rear Speaker Out
CODEC
- 8 -
- 9 -
Hardware Installation
Chapter 1 Hardware Installation
1-1 Installation Precautions
The motherboard contains numerous delicate electronic circuits and components which can become
damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user's
manual and follow these procedures:
•Prior to installation, make sure the chassis is suitable for the motherboard.
•Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or
warranty sticker provided by your dealer. These stickers are required for warranty validation.
•Always remove the AC power by unplugging the power cord from the power outlet before
installing or removing the motherboard or other hardware components.
•When connecting hardware components to the internal connectors on the motherboard, make
sure they are connected tightly and securely.
•When handling the motherboard, avoid touching any metal leads or connectors.
•It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic
components such as a motherboard, CPU or memory. If you do not have an ESD wrist strap,
keep your hands dry and î‚¿rst touch a metal object to eliminate static electricity.
•Prior to installing the motherboard, please have it on top of an antistatic pad or within an
electrostatic shielding container.
•Before connecting or unplugging the power supply cable from the motherboard, make sure
the power supply has been turned off.
•Before turning on the power, make sure the power supply voltage has been set according to
the local voltage standard.
•Before using the product, please verify that all cables and power connectors of your hardware
components are connected.
•To prevent damage to the motherboard, do not allow screws to come in contact with the
motherboard circuit or its components.
•Make sure there are no leftover screws or metal components placed on the motherboard or
within the computer casing.
•Do not place the computer system on an uneven surface.
•Do not place the computer system in a high-temperature or wet environment.
•Turning on the computer power during the installation process can lead to damage to system
components as well as physical harm to the user.
•If you are uncertain about any installation steps or have a problem related to the use of the
product, please consult a certiî‚¿ed computer technician.
•If you use an adapter, extension power cable, or power strip, ensure to consult with its installation
and/or grounding instructions.
- 10 -
Hardware Installation
1-2 Product Specications
CPU î‚ŠAMD Socket sTRX4:
- Support 3rd Generation AMD Ryzenâ„¢ Threadripperâ„¢ processors
(Go to GIGABYTE's website for the latest CPU support list.)
Chipset î‚ŠAMD TRX40
Memory î‚Š 8 x DDR4 DIMM sockets supporting up to 256 GB (32 GB single DIMM capacity)
of system memory
î‚ŠQuad channel memory architecture
î‚ŠSupport for DDR4 3200/2933/2667/2400/2133 MHz memory modules
î‚ŠSupport for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules
î‚ŠSupport for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
î‚ŠSupport for Extreme Memory Proî‚¿le (XMP) memory modules
(Go to GIGABYTE's website for the latest supported memory speeds and memory
modules.)
Audio Realtek® ALC4080 Audio CODEC
Support for DTS:X® Ultra
î‚ŠHigh Deî‚¿nition Audio
î‚Š2/4/5.1/7.1-channel
î‚ŠSupport for S/PDIF Out
LAN 2 x Intel® GbE LAN chips (1 Gbps/100 Mbps)
Wireless
Communication
Module
Intel® Wi-Fi 6 AX200
- WIFI a, b, g, n, ac, ax, supporting 2.4/5 GHz Dual-Band
- BLUETOOTH 5.2
- Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data rate
* Actual data rate may vary depending on environment and equipment.
Expansion Slots î‚Š2 x PCI Express x16 slots, running at x16 (PCIEX16_1, PCIEX16_2)
î‚Š2 x PCI Express x16 slots, running at x8 (PCIEX8_1, PCIEX8_2)
î‚Š1 x PCI Express x1 slot
(All of the PCI Express slots conform to PCI Express 4.0 standard.)
Multi-Graphics
Technology
î‚Š Support for AMD Quad-GPU CrossFireâ„¢ and 4-Way/3-Way/2-Way AMD
CrossFireâ„¢ technologies
 Support for NVIDIA® Quad-GPU SLI™ and 4-Way/3-Way/2-Way NVIDIA® SLI™
technologies
Storage Interface î‚ŠCPU:
- 1 x M.2 connector (Socket 3, M key, type 2260/2280/22110 SATA and PCIe
4.0 x4/x2 SSD support) (M2M)
- 1 x M.2 connector (Socket 3, M key, type 2280 SATA and PCIe 4.0 x4/x2
SSD support) (M2Q)
î‚ŠChipset:
- 1 x M.2 connector (Socket 3, M key, type 2280/22110 SATA and PCIe 4.0
x4/x2 SSD support) (M2P)
- 1 x M.2 connector (Socket 3, M key, type 2280 PCIe 4.0 x4/x2 SSD support)
(M2C)
- 8 x SATA 6Gb/s connectors
î‚ŠSupport for RAID 0, RAID 1, and RAID 10
- 11 -
Hardware Installation
USB î‚ŠCPU:
- 4 x USB 3.2 Gen 2 Type-A ports (red) on the back panel
î‚ŠChipset:
- 1 x USB Type-C® port on the back panel, with USB 3.2 Gen 2 support
- 1 x USB Type-C® port with USB 3.2 Gen 2 support, available through the
internal USB header
- 1 x USB 3.2 Gen 2 Type-A port (red) on the back panel
- 4 x USB 3.2 Gen 1 ports available through the internal USB headers
î‚ŠChipset+2 USB 2.0 Hubs:
- 6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through
the internal USB headers)
Internal
Connectors
î‚Š1 x 24-pin ATX main power connector
î‚Š2 x 8-pin ATX 12V power connectors
î‚Š1 x OC_PEG power connector
î‚Š1 x CPU fan header
î‚Š1 x water cooling CPU fan header
î‚Š2 x system fan headers
î‚Š4 x system fan/water cooling pump headers
î‚Š2 x addressable LED strip headers
î‚Š2 x RGB LED strip headers
î‚Š4 x M.2 Socket 3 connectors
î‚Š8 x SATA 6Gb/s connectors
î‚Š1 x front panel header
î‚Š1 x front panel audio header
1 x USB Type-C® header, with USB 3.2 Gen 2 support
î‚Š2 x USB 3.2 Gen 1 headers
î‚Š2 x USB 2.0/1.1 headers
î‚Š1 x GIGABYTE GC-TITAN RIDGE Add-in Card Connector
î‚Š 1 x Trusted Platform Module (TPM) header (2x6 pin, for the GC-TPM2.0_S
module only)
î‚Š1 x power button
î‚Š1 x reset button
î‚Š2 x temperature sensor headers
î‚Š1 x Clear CMOS jumper
Back Panel
Connectors
î‚Š1 x Q-Flash Plus button
î‚Š1 x Clear CMOS button
1 x USB Type-C® port, with USB 3.2 Gen 2 support
î‚Š5 x USB 3.2 Gen 2 Type-A ports (red)
î‚Š2 x USB 2.0/1.1 ports
î‚Š2 x RJ-45 ports
î‚Š2 x SMA antenna connectors (2T2R)
î‚Š1 x optical S/PDIF Out connector
î‚Š5 x audio jacks
I/O Controller iTE® I/O Controller Chip
- 12 -
Hardware Installation
Hardware
Monitor
î‚ŠVoltage detection
î‚ŠTemperature detection
î‚ŠFan speed detection
Water cooling ow rate detection
î‚ŠOverheating warning
î‚ŠFan fail warning
î‚ŠFan speed control
* Whether the fan (pump) speed control function is supported will depend on the fan
(pump) you install.
BIOS 2 x 128 Mbit ash
î‚ŠUse of licensed AMI UEFI BIOS
î‚ŠSupport for DualBIOSâ„¢
î‚ŠPnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
Unique Features î‚ŠSupport for APP Center
* Available applications in APP Center may vary by motherboard model. Supported
functions of each application may also vary depending on motherboard speciî‚¿cations.
- @BIOS
- AutoGreen
- Cloud Station
- EasyTune
- Fast Boot
- Game Boost
- RGB Fusion
- Smart Backup
- Smart Keyboard
- Smart Survey
- System Information Viewer
- USB Blocker
- USB TurboCharger
î‚ŠSupport for Q-Flash Plus
î‚ŠSupport for Q-Flash
î‚ŠSupport for Xpress Install
Bundled
Software
Norton® Internet Security (OEM version)
î‚ŠXSplit Gamecaster + Broadcaster (12 months license)
î‚ŠcFosSpeed
Operating
System î‚ŠSupport for Windows 10 64-bit
Form Factor î‚ŠXL-ATX Form Factor; 32.5cm x 26.9cm
* GIGABYTE reserves the right to make any changes to the product speciî‚¿cations and product-related information without
prior notice.
Please visit GIGABYTE's website
for support lists of CPU, memory
modules, SSDs, and M.2 devices.
Please visit the Support\Utility List
page on GIGABYTE's website to
download the latest version of apps.
- 13 -
Hardware Installation
The CPU carrier frame must be slided into the CPU rail frame with the CPU. Do not remove the
CPU from the CPU carrier frame.
1-3-1 Installing the CPU
1-3 Installing the CPU and CPU Cooler
Read the following guidelines before you begin to install the CPU:
•Make sure that the motherboard supports the CPU.
(Go to GIGABYTE's website for the latest CPU support list.)
•Prepare a T20 star screwdriver.
•Always turn off the computer and unplug the power cord from the power outlet before installing the
CPU to prevent hardware damage.
•Apply an even and thin layer of thermal grease on the surface of the CPU.
•Do not turn on the computer if the CPU cooler is not installed, otherwise overheating and damage
of the CPU may occur.
•Set the CPU host frequency in accordance with the CPU specications. It is not recommended
that the system bus frequency be set beyond hardware speciî‚¿cations since it does not meet the
standard requirements for the peripherals. If you wish to set the frequency beyond the standard
speciî‚¿cations, please do so according to your hardware speciî‚¿cations including the CPU, graphics
card, memory, hard drive, etc.
CPU
Pin One Triangle
CPU Carrier Frame
AMD Socket sTRX4
CPU Load Plate Screw
CPU Load Plate Screw
Pin One Triangle
- 14 -
Hardware Installation
Follow the steps below to correctly install the CPU into the motherboard CPU socket.
•Before installing the CPU, make sure to turn off the computer and unplug the power cord from
the power outlet to prevent damage to the CPU.
•To protect the socket contacts, do not remove the CPU socket cap unless the CPU is inserted
into the CPU socket. Save the cap properly and always replace it when the CPU is removed.
Step 1:
On the CPU metal load plate, there are three screws
marked as 1, 2, 3. To loosen/tighten these screws,
you need a T20 star screwdriver. The OPEN and
CLOSE markings indicate in what order to loosen/
tighten the screws.
To open the CPU metal load plate, loosen the screws
in 3>2>1 sequence.
To close the CPU metal load plate, tighten the screws
in 1>2>3 sequence.
Step 2:
To open the CPU metal load plate, start by loosening
Screw 3, then Screw 2, and î‚¿nally Screw 1. After all
three screws are loosened, gently lift the load plate
to its fully open position.
Screw 3 Screw 2
Screw 1
Step 4:
Use one hand to hold the rail frame and the other to
slide the external cap out of the rail frame.
Step 3:
Use your î‚¿ngers to pull up the tabs on the two sides
of the CPU rail frame to release the CPU rail frame
from the CPU socket. Then lift the rail frame.
Step 5:
Grasp the top portion of the CPU carrier frame and
align the edges of the CPU carrier frame with the rails
of the CPU rail frame. Then slide the carrier frame
into the rails until the it stops sliding in.
Make sure the edges of the CPU carrier frame are
installed correctly on the rails.
CPU Rail
Frame Rails
- 15 -
Hardware Installation
Step 8:
Af ter installing the CPU, use two î‚¿ngers to push down
on the upper portion of the sides of the CPU carrier
frame to fasten the rail frame back to the CPU socket.
Step 9:
Close the metal load plate. With one î‚¿nger pressing
down on the load plate, begin tightening Screw 1
slightly. Then do the same to Screw 2 and Screw 3.
Next, fully tighten the three screws. Make sure the
motherboard is placed on a stable surface during
the tightening process.
Step 6:
Push the carrier frame into place and you will hear a
"click" sound when it is pushed to the bottom.
Warning! The CPU carrier frame cannot be placed
outside the rails.
Step 7:
Remove the CPU socket cap.
- 16 -
Hardware Installation
1-3-2 Installing the CPU Cooler
Refer to the steps below to correctly install the CPU cooler on the motherboard. Use a CPU cooler that is
speciî‚¿cally designed to be able to cool an AMD Ryzenâ„¢ Threadripperâ„¢ processor or install a water cooling
system to ensure proper heat dissipation and a stable system operation. (Actual installation process may differ
depending the CPU cooler to be used. Refer to the user's manual for your CPU cooler.)
Use extreme care when removing the CPU cooler because the thermal grease/tape between
the CPU cooler and CPU may adhere to the CPU. Inadequately removing the CPU cooler may
damage the CPU.
Step 1:
Apply an even and thin layer of thermal grease on
the surface of the installed CPU.
Step 2:
Place the cooler atop the CPU, aligning the four
mounting screws with the mounting holes around
the CPU socket. NOTE: the spacing between the
upper two screws is not the same as that between
the lower two screws, please make sure to align the
screws correctly).
CPU Cooler Mounting Holes
CPU Cooler Mounting Holes
Step 4:
Finally, attach the power connector of the CPU
cooler to the CPU fan header (CPU_FAN) on the
motherboard.
Step 3:
Use one hand to hold the cooler and the other to
tighten the screws in a diagonal sequence. Begin
tightening a screw with a few turns and repeat with
the screw diagonally opposite the one you just
tightened. Then do the same to the other pair. Next,
fully tighten the four screws.
- 17 -
Hardware Installation
1-4 Installing the Memory
Read the following guidelines before you begin to install the memory:
•Make sure that the motherboard supports the memory. It is recommended that memory of the same
capacity, brand, speed, and chips be used.
(Go to GIGABYTE's website for the latest supported memory speeds and memory modules.)
•Always turn off the computer and unplug the power cord from the power outlet before installing the
memory to prevent hardware damage.
•Memory modules have a foolproof design. A memory module can be installed in only one direction.
If you are unable to insert the memory, switch the direction.
1-4-1 Quad Channel Memory Conguration
This motherboard supports Quad Channel Technology. After the memory is installed, the BIOS will automatically
detect the speciî‚¿cations and capacity of the memory. The eight DDR4 memory sockets are divided into four
channels and each channel has two memory sockets as following:
Channel A: DDR4_A1, DDR4_A2
Channel B: DDR4_B1, DDR4_B2
Channel C: DDR4_C1, DDR4_C2
Channel D: DDR4_D1, DDR4_D2
DDR4_D2
DDR4_A1
DDR4_C2
DDR4_B1
DDR4_D1
DDR4_A2
DDR4_C1
DDR4_B2
Refer to the table below for memory installation according to the number of the memory modules you want to install:
DDR4_D2 DDR4_D1 DDR4_C2 DDR4_C1 DDR4_A1 DDR4_A2 DDR4_B1 DDR4_B2
1 Modules a
2 Modules a a
4 Modules a a a a
6 Modules a a a a a a
8 Modules a a a a a a a a
a: Installed, Empty: Not Installed
For optimum performance, it is recommended that memory of the same capacity, brand, speed,
and chips be used. When installing the memory, make sure to begin with the second socket of each
channel, such as DDR4_A2, DDR4_B2, DDR4_C2, DDR4_D2.
- 18 -
Hardware Installation
1-4-2 Installing a Memory
Before installing a memory module, make sure to turn off the computer and unplug the power cord
from the power outlet to prevent damage to the memory module. DDR4 and DDR3 DIMMs are not
compatible to each other or DDR2 DIMMs. Be sure to install DDR4 DIMMs on this motherboard.
A DDR4 memory module has a notch, so it can only î‚¿t in one direction. Follow the steps below to correctly install
your memory modules in the memory sockets.
Notch
DDR4 DIMM
Step 1:
Note the orientation of the memory module. Spread the retaining clip
at the right end of the memory socket. Place the memory module on
the socket. As indicated in the picture on the left, place your î‚¿ngers
on the top edge of the memory, push down on the memory and insert
it vertically into the memory socket.
Step 2:
The clip at the right end of the socket will snap into place when the
memory module is securely inserted.
- 19 -
Hardware Installation
Follow the steps below to correctly install your expansion card in the expansion slot.
1. Locate an expansion slot that supports your card. Remove the metal slot cover from the chassis back panel.
2. Align the card with the slot, and press down on the card until it is fully seated in the slot.
3. Make sure the metal contacts on the card are completely inserted into the slot.
4. Secure the card's metal bracket to the chassis back panel with a screw.
5. After installing all expansion cards, replace the chassis cover(s).
6. Turn on your computer. If necessary, go to BIOS Setup to make any required BIOS changes for your
expansion card(s).
7. Install the driver provided with the expansion card in your operating system.
Example: Installing and Removing a PCI Express Graphics Card:
PCI Express x16 Slot
•Installing a Graphics Card:
Gently push down on the top edge of the card until it
is fully inserted into the PCI Express slot. Make sure
the card is securely seated in the slot and does not
rock.
•Removing the Card:
Gently push back on the lever on the slot and then lift the card straight out from the
slot.
1-5 Installing an Expansion Card
Read the following guidelines before you begin to install an expansion card:
•Make sure the motherboard supports the expansion card. Carefully read the manual that came
with your expansion card.
•Always turn off the computer and unplug the power cord from the power outlet before installing an
expansion card to prevent hardware damage.
- 20 -
Hardware Installation
1-6 Setting up AMD CrossFire™/NVIDIA® SLI™ Conguration
(Note 1) When using dual core graphics cards, only 2-way is supported.
(Note 2) The bridge connector(s) may be needed or not depending on your graphics cards.
(Note 3) When two or more graphics cards are installed, we recommend that you connect the power cable
from the power supply to the OC_PEG connector to ensure system stability.
A. System Requirements
-Windows 10 64-bit operating system
-A CrossFire/SLI-supported motherboard with two or more PCI Express x16 slots and correct driver
-CrossFire/SLI-ready graphics cards of identical brand and chip and correct driver
(For the latest GPUs that support the 4-Way/3-way CrossFire/SLI technology, please refer to the AMD/
NVIDIA® website.) (Note 1)
-CrossFire (Note 2)/SLI bridge connectors
-A power supply with sufî‚¿cient power is recommended (Note 3) (Refer to the manual of your graphics cards
for the power requirement)
B. Connecting the Graphics Cards
Step 1:
Observe the steps in "1-5 Installing an Expansion Card" and install CrossFire/SLI graphics cards on the PCI
Express x16 slots.
Step 2:
Insert the CrossFire (Note 2)/SLI bridge connectors in the CrossFire/SLI gold edge connectors on top of the cards.
Step 3:
Plug the display cable into the graphics card on the PCIEX16_1 slot.
Procedure and driver screen for enabling CrossFire/SLI technology may differ by graphics cards and
driver version. Refer to the manual that came with your graphics cards for more information about
enabling CrossFire/SLI technology.
C. Conguring the Graphics Card Driver
C-1. To Enable CrossFire Function
After installing the graphics card driver in the operating
system, go to the AMD RADEON SETTINGS screen.
Browse to Gaming\Global Settings and ensure AMD
CrossFire is set to On.
C-2. To Enable SLI Function
After installing the graphics card driver in the operating
system, go to the NVIDIA Control Panel. Browse to the
Congure SLI, Surround, PhysX screen and ensure
Maximize 3D performance is enabled.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112

Gigabyte TRX40 DESIGNARE Owner's manual

Category
Server/workstation motherboards
Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI