SLFC AP-103 Operating instructions

Brand
SLFC
Model
AP-103
Type
Operating instructions

This manual is also suitable for

SLFC AP-103 is a portable electric inflator suitable for cars, bicycles, motorbikes, balls, and inflatable toys. It features a built-in pressure indicator that shows the tire pressure in real time. The inflator can be set to automatically stop inflating when the desired pressure is reached. It also has a built-in LED light for visibility in low-light conditions. Additionally, the SLFC AP-103 comes with various accessories, including a long inflator pipe, tire pressure detective, and car charger, making it versatile for different inflating needs.

SLFC AP-103 is a portable electric inflator suitable for cars, bicycles, motorbikes, balls, and inflatable toys. It features a built-in pressure indicator that shows the tire pressure in real time. The inflator can be set to automatically stop inflating when the desired pressure is reached. It also has a built-in LED light for visibility in low-light conditions. Additionally, the SLFC AP-103 comes with various accessories, including a long inflator pipe, tire pressure detective, and car charger, making it versatile for different inflating needs.

ELECTRIC PORTABLE INFLATOR
Operation Manual
AP-101/102/103
Thanks for choosing our electric portable inflator. Please read User
Guide carefully before using it.
This product can be applied to cars, bicycles, motorbikes, balls,
inflatable toys, etc.
1. The tire pressure is based on the recommendation of the pressure marked on the tire.
or can be found in the user maunal of your inflatable products.
2. To keep the products' long lifetime, please have it rest for 10 min in every 10 min inflating
time.
3. Please have it charged every half year.
4. Make sure the power is enough before using the inflator, and if use car charger into the
cigarette lighter, do not stop the car engine when inflating.
improper operation can be damage to the inflator.
1. Avoid using the accessories from other suppliers such as charger, car charger, it may cause fire
and unpredictable damage.
2. Please use the right charger, don't inflate when charging, it may burn the inflator or the charger.
3. Keep away from water, if there's water in the inflator, stop using it. Do not use it at inflammable
and explosive areas. (eg. Oil station)
4. Do not apply to large vehicles such as container truck, heavy-duty vehicles or heavy trailer etc.
5. Unplug the charger after fully charged.
6. Keep the inflator away from kids.
7. Do not disassemble the inflator by yourself.
3
Operaon ps
Warning
Operaon steps
AP-101/102:
1. press , lights on and working.
2. Press again, lights off and stop working.
3. Pressure indicator will show the tire pressure<only AP-101>.
AP-103:
1.Press “ ” button to set pressure on activated screen, then press “ ” button for inflating.
2.Repeatedly press “ ” button, the ATMOS will transform to PSI, BAR, KPA, or kg/cm². The
screen will show the real data.
3. “ ” & “ ” are preset keys. Click it for adjusting the target pressure slowly, long press for
adjusting the target pressure quickly. Setting will be completed after the screen flicker for 4
seconds，Or press the “ ” button to finish setting, Then press “ ” button for inflating.
4.When inflate to the set point, it will stop inflating automatically. And press the “ ”button,
LED light will turn off.
5. After inflation, pull out the tube from valve core and from inflator.
Unit
Unit
Unit
Technical Parameters
1. Input voltage: adaptor 15V DC.
2. Max current: 5A
3. Charge efficiency: 7-10L/min
4. Max inflating pressure: 120-150psi
5. Measuring accuracy: ±1.5psi
6. Tube length: 140±5mm
7. Operation temperature: -20℃～+60℃
8. Size: 54.8(L)×44.8(W)×198(H)mm
9. Inflator weight : 460g.
■Inflate tires of french gas mouth or other kinds of toys,you need screw the adapter to the thread of
the pipe, connect to the air hole, and follow the same steps to inflate.
■Tire pressure detective
Turn on the inflator, screw the pipe to the tire, it will display the pressure of your tire, press “ ” to
choose measure unit.<only AP-103>
■Charging
If the battery voltage is low, the inflator will turn off, it's time to charge.
Connect the charger with inflator's DC jack, turn on the power for charging, The charger indicator LED
red is charging and green full. It takes 2-3H for fully charge.
Unit
2
①inflator
②Adapter
③ Inflator pipe
④Plastic gas nozzle
⑤Ball pin
⑥French connection mouth
Product Structure
You can buy the Optional accessories ：
It can make you more easy to use
Long inflator pipe Car charger
A. LCD display( Pressure value and unit display)
B. “Unit”button(Activate the display screen,recyclable select the 4 pressure unit and
set pressure value
C.“Power” button: independently controlled the LED light; for inflating on and off.
D.DC charging port
E.+ - preset key, set the pressure you want
F.Pressure Indicator
AP-103 AP-102 AP-101
Device name and role on the panel:
1
Connect one end of air tube to inflator, plug the other end to tire valve core.
  • Page 1 1
  • Page 2 2

SLFC AP-103 Operating instructions

Brand
SLFC
Model
AP-103
Type
Operating instructions
This manual is also suitable for

SLFC AP-103 is a portable electric inflator suitable for cars, bicycles, motorbikes, balls, and inflatable toys. It features a built-in pressure indicator that shows the tire pressure in real time. The inflator can be set to automatically stop inflating when the desired pressure is reached. It also has a built-in LED light for visibility in low-light conditions. Additionally, the SLFC AP-103 comes with various accessories, including a long inflator pipe, tire pressure detective, and car charger, making it versatile for different inflating needs.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents