hank you for choosin
Please read the user’s manual carefully before
Thank you for choosing Boss Audio
x This product is only intended to be used and
installed in +12 VDC, negaƟve ground
electrical systems.
x Before aƩempƟng to install any of the
components, plan the locaƟon, placement
and wiring.
x Before drilling or securing any components,
double check for gas lines, brake lines, gas
tank, moving parts, or any other vital vehicle
part.
x When making electrical connecƟons, it’s
recommended they be soldered and
protected w/heat shrink or electrical tape
Before InstallaƟon
iinstallation and use
Screen Size: 4.3”, 16:9 Aspect Rao
Resoluon: 480 x 234
Power Input: 12 VDC, ≥7 W
Input: 2 Video, Auto Switching for Rear View
Video System Support: NTSC/PAL
Operang Temperature: -50° F to +140° F
*
**Rear view camera must be connected to V2
Source
Mirror SpecificaƟons
1) Mirror doesn't display the rear view
image when its engaged.
A) Rear view camera must be connected to
V2 source for it switch automacally.
2) The mirror won’t power up.
A) The red wire must be powered up with
ACC. The black wire must be grounded
properly.
3) Camera doesn't turn on
A) The camera must be triggered with the
reverse signal from the vehicle. The
signal will be easily found from the re-
verse lights.
TroubleshooƟng
Tech Support
If you quesons regarding the installaon or
products, please call us
M-F 8:30a-5p PST
805-322-8794
www.bossaudio.com
BV430RVM_0316_2