Grizzly T1239 Owner's manual

Brand: Grizzly

Model: T1239

Category: Vacuum cleaner supplies

Type: Owner's manual

Grizzly T1239 is a drywall sander that is ideal for sanding large surfaces quickly and efficiently. It features a powerful motor that delivers plenty of power for even the toughest sanding jobs. The sander also has a variable speed control that allows you to adjust the speed to match the material you are sanding. The T1239 also comes with a dust collection system that helps to keep your work area clean. With its powerful motor, variable speed control, and dust collection system, the Grizzly T1239 is the perfect tool for any drywall sanding job.

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

#JH19197 PRINTED IN CHINA

MODEL T1239

DRYWALL SANDER

OWNER'S MANUAL

(For models manufactured since 9/17)

This manual provides critical safety instructions on the proper setup,

operation, maintenance, and service of this machine/tool. Save this

document, refer to it often, and use it to instruct other operators.

Failure to read, understand and follow the instructions in this manual

may result in fire or serious personal injury—including amputation,

electrocution, or death.

The owner of this machine/tool is solely responsible for its safe use.

This responsibility includes but is not limited to proper installation in

a safe environment, personnel training and usage authorization,

proper inspection and maintenance, manual availability and compre-

hension, application of safety devices, cutting/sanding/grinding tool

integrity, and the usage of personal protective equipment.

The manufacturer will not be held liable for injury or property damage

from negligence, improper training, machine modifications or misuse.

Some dust created by power sanding, sawing, grinding, drilling, and

other construction activities contains chemicals known to the State

of California to cause cancer, birth defects or other reproductive

harm. Some examples of these chemicals are:

• Lead from lead-based paints.

• Crystalline silica from bricks, cement and other masonry products.

• Arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you

do this type of work. To reduce your exposure to these chemicals:

Work in a well ventilated area, and work with approved safety equip-

ment, such as those dust masks that are specially designed to filter

out microscopic particles.

SECTION 1: SAFETY .......................................................................................................2

Additional Safety Instructions for Sanders .................................................................4

SECTION 2: INTRODUCTION .........................................................................................5

Manual Accuracy ........................................................................................................5

Specifications ..............................................................................................................5

Contact Info ................................................................................................................5

Identification ................................................................................................................6

SECTION 3: SETUP .........................................................................................................7

Unpacking ...................................................................................................................7

Inventory .....................................................................................................................7

Hardware Recognition Chart ......................................................................................8

Assembly ....................................................................................................................9

Dust Collection ..........................................................................................................10

SECTION 4: OPERATIONS ...........................................................................................11

Installing/Removing Sanding Head ..........................................................................11

Operating Sander .....................................................................................................11

Sanding Positions .....................................................................................................12

SECTION 5: MAINTENANCE ........................................................................................13

Replacing Round Hook & Loop Pad .........................................................................13

Replacing Triangular Hook & Loop Pad ...................................................................13

Replacing Motor Brushes .........................................................................................14

Replacing Gear Cap .................................................................................................14

SECTION 6: SERVICE ...................................................................................................15

Troubleshooting ........................................................................................................15

SECTION 7: PARTS .......................................................................................................16

Parts Breakdown & List ...........................................................................................16

WARRANTY ...................................................................................................................17

Table of Contents

Model T1239 (Mfd. Since 09/17)-2-

SECTION 1: SAFETY

Safety Instructions for Power Tools

OWNER’S MANUAL. Read and under-

stand this owner’s manual BEFORE using

machine.

TRAINED OPERATORS ONLY. Untrained

operators have a higher risk of being hurt

or killed. Only allow trained/supervised

people to use this power tool. When tool

is not being used, disconnect power, and

store in out-of-reach location to prevent

unauthorized use—especially around

children. Make workshop kid proof!

DANGEROUS ENVIRONMENTS. Do not

use tools in areas that are wet, cluttered,

or have poor lighting. Operating tools in

these areas greatly increases risk of acci-

dents and injury.

MENTAL ALERTNESS REQUIRED. Full

mental alertness is required for safe oper-

ation of power tools. Never operate under

the influence of drugs or alcohol, when

tired, or when distracted.

DISCONNECT POWER FIRST. Always

disconnect tool from power supply

BEFORE making adjustments, chang-

ing tooling, or servicing machine. This

prevents an injury risk from unintended

startup or contact with live electrical com-

ponents.

EYE PROTECTION.

Always wear ANSI-

approved safety glasses or a face shield

when operating or observing machinery to

reduce the risk of eye injury or blindness

from flying particles. Everyday eyeglasses

are not approved safety glasses.

For Your Own Safety Read Instruction Manual

Before Operating This Equipment

The purpose of safety symbols is to attract your attention to possible hazard-

ous conditions. This manual uses a series of symbols and signal words which

are intended to convey the level of importance of the safety messages. The

progression of symbols is described below. Remember that safety messages by

themselves do not eliminate danger and are not a substitute for proper accident

prevention measures.

Indicates an imminent hazardous situation which, if

not avoided, WILL result in death or serious injury.

Indicates a potentially hazardous situation which, if

not avoided, COULD result in death or serious injury.

Indicates a potentially hazardous situation which, if

not avoided, MAY result in minor or moderate injury.

It may also be used to alert against unsafe practices.

This symbol is used to alert the user to useful infor-

mation about proper operation of the equipment.

NOTICE

Model T1239 (Mfd. Since 09/17) -3-

ELECTRICAL SAFETY. Tool plug must

match outlet. Double-insulated tools have

a polarized plug (one blade is wider than

the other), which must be plugged into a

polarized outlet. Never modify plug. Do

not use adapter for grounded tools. Use

a ground fault circuit interrupter if opera-

tion is unavoidable in damp locations.

Avoid touching grounded surfaces when

operating tool.

WEARING PROPER APPAREL. Do not

wear clothing, apparel or jewelry that

can become entangled in moving parts.

Always tie back or cover long hair. Wear

non-slip footwear to avoid accidental

slips, which could cause loss of workpiece

control. Wear hard hat as needed.

HAZARDOUS DUST. Dust created while

using tools may cause cancer, birth

defects, or long-term respiratory damage.

Be aware of dust hazards associated with

each workpiece material, always wear

a NIOSH-approved respirator, and con-

nect tool to an appropriate dust collection

device to reduce your risk.

HEARING PROTECTION. Always wear

hearing protection when operating or

observing loud machinery. Extended

exposure to this noise without hearing

protection can cause permanent hearing

loss.

REMOVE ADJUSTING TOOLS. Never

leave adjustment tools, chuck keys,

wrenches, etc. in or on tool—especially

near moving parts. Verify removal before

starting!

INTENDED USAGE. Only use tool for its

intended purpose. Never modify or alter

tool for a purpose not intended by the

manufacturer or serious injury or death

may result!

AWKWARD POSITIONS. Keep proper

footing and balance at all times when

operating tool. Do not overreach! Avoid

awkward hand positions that make tool

control difficult or increase the risk of

accidental injury.

SAFE HANDLING. Firmly grip tool. To

avoid accidental firing, do not keep finger

on switch or trigger while carrying.

FORCING TOOLS.. Use right tool for job,

and do not force it. It will do job safer and

better at rate for which it was designed.

SECURING WORKPIECE. When

required, use clamps or vises to secure

workpiece. This protects hands and frees

both of them to operate tool.

GUARDS & COVERS.

Guards and cov-

ers reduce accidental contact with mov-

ing parts or flying debris. Ensure they

are properly installed, undamaged, and

working correctly.

CHILDREN & BYSTANDERS. Keep chil-

dren and bystanders at a safe distance

from the work area. Stop using tool if they

become a distraction.

USE RECOMMENDED ACCESSORIES.

Consult this manual or manufacturer

for recommended accessories. Using

improper accessories will increase risk of

serious injury.

MAINTAIN WITH CARE. Keep cutting

tool edges sharp and clean. Follow all

maintenance instructions and lubrication

schedules to keep tool

in good work-

ing condition. A tool that is improperly

maintained could malfunction, leading to

serious personal injury or death. Only

have tool serviced by qualified service-

personnel using matching replacement

parts.

CHECK DAMAGED PARTS. Regularly

inspect tool for any condition that may

affect safe operation. Immediately repair

or replace damaged or mis-adjusted parts

before operating tool.

MAINTAIN POWER CORDS. When dis-

connecting cord-connected tools from

power, grab and pull the plug—NOT the

cord. Carrying or pulling the cord may

damage wires inside. Do not handle cord/

plug with wet hands. Avoid cord damage

by keeping it away from heated surfaces,

high traffic areas, harsh chemicals, sharp

edges, moving parts, and wet/damp loca-

tions. Damaged cords increase risk of

electrocution.

UNATTENDED OPERATION. Never

leave tool running while unattended. Turn

tool OFF and ensure all moving parts

completely stop before walking away.

EXPERIENCING DIFFICULTIES.

If at

any time you experience difficulties per-

forming the intended operation, stop

using the machine! Contact our Technical

Support at (570) 546-9663.

Model T1239 (Mfd. Since 09/17)-4-

Additional Safety Instructions for Sanders

No list of safety guidelines can be

complete. Every shop environment

is different. Always consider safety

first, as it applies to your individual

working conditions. Use this and

other machinery with caution and

respect. Failure to do so could result

in serious personal injury, damage to

equipment or poor work results.

DUST COLLECTION. Never

operate without adequate vacuum

or dust collection system connected

and running. Proper dust collection

reduces dust in work area, which

decreases risk of long-term respiratory

damage, but it is not a substitute for

using a respirator.

WEAR RESPIRATOR. Sanding

creates large amounts of dust and

flying chips that can lead to respiratory

illness. Reduce risk of these hazards

by wearing approved respiratory

protection when using sander.

ALWAYS USE SAFETY GLASSES/

FACE SHIELD. Use a face shield dur-

ing sanding operation. Everyday eye-

glasses only have impact-resistant

lenses, they are NOT safety glasses.

WEAR PROPER APPAREL. Do not

wear loose clothing, gloves, neck-

ties, rings, bracelets, or other jew-

elry which may get caught in moving

parts. Non-slip footwear is recom-

mended. Wear a protective hair cover-

ing to contain long hair.

WEAR APPROVED HEARING

PROTECTION. Noise produced during

sanding operations may cause hearing

damage with prolonged exposure.

SANDPAPER CONDITION. Worn or

damaged sandpaper not only produces

poor sanding results, but could fly apart,

aggressively grab work surface, and throw

debris at the operator. Always inspect

sandpaper before operation and replace

if worn or damaged.

HAND PLACEMENT. Rotating sandpaper

can remove a large amount of flesh in a

few seconds. Always keep hands away

from sandpaper during operation. Never

touch moving sandpaper on purpose.

UNATTENDED TOOL. Do not leave tool

unattended when connected to power.

Always disconnect tool from power before

leaving work area.

MAINTAIN TOOLS WITH CARE. Keep

tool and accessories clean for best and

safest performance.

Model T1239 (Mfd. Since 09/17) -5-

SECTION 2: INTRODUCTION

Weight ............................................. 8 lbs.

Horsepower ..........................600W

(

⁄5HP)

Voltage ..............................................120V

Phase ...................................Single-Phase

Amps .....................................................5A

Round Pad Rotation .........600–1500 RPM

Tri. Pad Oscillations ........ 3000–6000/Min.

Round Pad Diameter .........................11

⁄4"

Triangular Pad Width ...........................8

⁄2"

Specifications

This tool presents injury hazards

to untrained users. Read through

entire manual to become familiar

with controls and operations before

using!

If you have any comments regarding this

manual, please write to us at the following

address:

Grizzly Industrial, Inc.

P.O. Box 2069

Bellingham, WA 98227-2069

Email: [email protected]

Most importantly, we stand behind our

tools. If you have any service questions or

parts requests, please call or write us at

the location listed below.

Grizzly Technical Support

1815 W. Battlefield

Springfield, MO 65807

Phone: (570) 546-9663

Email: [email protected]

Contact InfoManual Accuracy

We are proud to offer this document with

your new tool! We’ve made every effort to

be exact with the instructions, specifica-

tions, drawings, and photographs of the

tool we used when writing this manual.

However, sometimes we still make an

occasional mistake.

Also, owing to our policy of continuous

improvement, your tool may not exactly

match the manual. If you find this to be

the case, and the difference between the

manual and machine leaves you in doubt,

immediately call our technical support for

updates or clarification.

For your convenience, we post all available

documentation on our website at www.

grizzly.com. Any updates to this docu-

ment will be reflected on our website as

soon as complete.

Model T1239 (Mfd. Since 09/17)-6-

Identification

This tool presents injury hazards

to untrained users. Read through

entire manual to become familiar

with controls and operations before

using!

Extension

Tube

Triangular

Sanding Head

Vacuum Hose

Round

Sanding

Head

ON/OFF

Trigger

Variable-

Speed Dial

Hinge

Lock

Motor

Model T1239 (Mfd. Since 09/17) -7-

SECTION 3: SETUP

Your tool was carefully packaged for

safe transportation. Remove the packag-

ing materials from around your tool and

inspect it. If you discover the tool is dam-

aged, please immediately call Customer

Service at (570) 546-9663 for advice.

Save the containers and all packing mate-

rials for possible inspection by the car-

rier or its agent. Otherwise, filing a freight

claim can be difficult.

When you are completely satisfied with

the condition of your shipment, inventory

the contents.

If any non-proprietary parts are missing

(e.g., a nut or a washer), we will gladly

replace them; or for the sake of expedi-

ency, replacements can be obtained at

your local hardware store.

Model T1239 Inventory (Figure 1)

A. Main Sander Assembly ......................1

B. Triangular Sanding Head ...................1

C. Extension Tube ..................................1

D. Round Sanding Head ........................1

E. Corner Sanding Discs (60, 120,

150, 180, 220 Grit) ...................... 1 Ea.

F. Round Sanding Discs (60, 120,

150, 180, 220 Grit) ...................... 1 Ea.

G. Vacuum Hose ....................................1

H. Dust Hose Adapter 1

⁄4" .....................1

I. Hex Wrench 5mm ..............................1

J. Carrying Case (Not shown) ...............1

Unpacking Inventory

Figure 1. Inventory items.

Model T1239 (Mfd. Since 09/17)-8-

USE THIS CHART TO MATCH UP

HARDWARE DURING THE INVENTORY

AND ASSEMBLY PROCESS.

5mm

Flat

Head

Cap

Screw

Hardware Recognition Chart

Model T1239 (Mfd. Since 09/17) -9-

Assembly

3. Press sanding head lock forward to

secure it in place (see Figure 4).

Figure 4. Locking sanding head in place.

4. Apply appropriate sanding pad to

sanding head by aligning dust holes

and firmly pressing each together.

5. Loosen sander dust collar (see

Figure 5A) and insert extension tube

collar, making sure not to exceed

"Max" line on extension tube (see

Figure 5A). Ensure extension tube

handle (see Figure 5B) is aligned

with handle on sander assembly.

Note: Ensure extension tube collar

is fully seated against sander dust

collar.

To assemble drywall sander:

1. Remove sander from case, unfold

sander assembly (see Figure 2), and

lock assembly together.

Figure 2. Locking sander assembly

together.

Lock

2. Choose appropriate sanding head

for operation, and align gear key

receiver on motor with gear key on

sanding head (see Figure 3).

Figure 3. Sanding head key.

Key

Receiver

Gear Key

Sanding

Head

Figure 5. Extension tube connected.

Max

Line

Sander

Dust Collar

Extension

Tube Collar

Handles

Extension Tube

Head

Lock

Model T1239 (Mfd. Since 09/17)-10-

DO NOT operate tool without

properly connecting dust collection.

Dust Collection

The Model T1239 Drywall Sander is

equipped with a dust collection hose fea-

turing a 2" outside diameter dust port (see

Figure 7). The dust hose connects to most

shop vacuum dust ports, or the included

⁄4" vacuum adapter can be used.

The dust hose handle features an in-line

pressure collar (see Figure 8) for adjusting

suction depending upon the size of dust

collector connected.

Note: Dust cannot escape pressure collar

hole during operation—the hole simply

allows additional air to flow into the dust

hose.

Rotate the pressure collar to the "Open"

position (see Figure 8) to increase

amount of suction; rotate collar to "Half" or

"Closed" position to decrease the amount

of suction.

6. Unscrew rear collar and insert han-

dled-end of dust hose (see Figure 6),

then retighten rear collar to secure.

Dust Hose

Rear Collar

Handle

Figure 6. Dust hose connected.

Figure 7. Connecting sander dust hose to

shop vacuum hose.

Figure 8. Dust hose pressure collar and

collar scale.

Pressure

Collar

Hole

To Sander

Closed

To Sander

Open

To Sander

Half

Model T1239 (Mfd. Since 09/17) -11-

SECTION 4: OPERATIONS

Operating Sander

To operate drywall sander:

1. Ensure sanding pad is properly

aligned with dust-extraction holes in

sanding head (see Figure 11), and

connected to approprate dust collec-

tion system.

The pivoting head of the drywall sander

allows for both overhead and vertical sand-

ing. The round sanding head is designed

for exposed drywall seams in the center

of walls or ceilings. The triangular sand-

ing head is designed for inside corners of

walls and ceilings.

Figure 11. Applying sandpaper to pad.

Dust

Extraction

Holes

2. Adjust pressure collar (see Figure 12)

to supply adequate dust collection

during operation.

Note: Further adjustment during

operation may be needed to ensure

optimum dust collection.

Figure 12. Adjusting pressure collar.

Pressure

Collar

Installing/Removing

Sanding Head

4. Pull head lock pin outward and back

to disengage sanding head.

The Model T1239 features two sanding

head options: round and triangular. The

sanding heads can be changed quickly

depending on operation.

To install sanding head:

1. DISCONNECT TOOL FROM

POWER!

2. Align sanding head bracket with

sander bracket and bring both brack-

ets together, as shown in Figure 9.

Figure 9. Aligning mounting brackets.

Sanding

Head

Bracket

3. With sanding head and sander body

pressed firmly together, push head

lock pin forward to engage lock (see

Figure 10).

Figure 10. Positioning sanding pad.

Head

Lock

LockedUnlocked

Model T1239 (Mfd. Since 09/17)-12-

3. Connect machine to power.

4. Pull ON/OFF trigger (see Figure 13)

to turn machine ON.

Tip: ON/OFF trigger is locked in

place by pressing lock button (see

Figure 13) inward while sander is

running. Disengage lock by pulling-in

and releasing ON/OFF trigger.

5. Adjust variable-speed dial (see

Figure 13) to desired sanding head

speed.

Figure 13. Sander controls.

Variable-

Speed Dial

ON/OFF

Trigger

Lock

Button

6. Move sanding head lightly back-and-

forth across drywall tape seam to

evenly sand workpiece, being careful

to not apply too much pressure.

7. Complete sanding operation and turn

sander OFF by releasing ON/OFF

trigger.

Sanding Positions

The round sanding head is designed for

exposed drywall seams in the center of

walls or ceilings, as shown in Figure 14.

The triangular sanding head is designed

for inside corners of walls and ceilings, as

shown in Figure 15.

Figure 14. Typical round pad sanding.

Figure 15. Typical triangular pad sanding.

Triangular

Pad

Round

Pad

Eye injuries, respiratory problems,

or hearing loss can occur while

operating this tool. Wear personal

protective equipment to reduce

your risk from these hazards.

Model T1239 (Mfd. Since 09/17) -13-

SECTION 5: MAINTENANCE

Always DISCONNECT POWER

before servicing, adjusting, or doing

maintenance to reduce the risk of

accidental injury or electrocution.

Replacing Round

Hook & Loop Pad

Over time the hook & loop pad connected

to the sanding head will become worn.

This is evident when new sandpaper discs

no longer adhere to the pad properly, or for

normal durations of standard use.

To replace the round hook & loop pad,

remove the M6-1 x 14 cap screw and 6mm

flat washer securing pad to sanding head

(see Figure 16). Replace sanding pad.

Note: Hold the sanding pad firmly while

removing cap screw to keep pad from

spinning.

Figure 16. Removing worn sanding pad.

Sanding

Pad

Replacing Triangular

Hook & Loop Pad

If new sandpaper discs no longer adhere

to the pad properly, the hook & loop sand-

ing pad may need to be replaced.

To replace triangular sanding pad:

1. Remove (3) M4-.7 x 8 Phillips head

screws and (3) M4-.7 x 8 flange

screws (see Figure 17) from sanding

pad.

Figure 17. Removing sanding pad.

x 3

2. Remove sanding pad and replace

with new pad (see Figure 18).

Note: Sanding pad connects to sand-

ing head with (3) rubber vibration-

dampening connectors. Connectors

may be suctioned to backside of

sanding pad, requiring a bit of force

to separate.

Figure 18. Replacing sanding pad.

Rubber

Connectors

(2 of 3)

Sanding Pad

x 3

Model T1239 (Mfd. Since 09/17)-14-

Motor brushes are a consumable item

inside the motor and will require replace-

ment with time. Heavy workloads and

excessive pressure on sanding head can

quickly wear motor brushes.

Motor brushes may require replacement if

motor becomes sluggish, is very slow to

start, or generates a grinding sound within

the housing.

IMPORTANT: Always replace motor

brushes as a pair to ensure even wear.

Replacing Motor

Brushes

Replacing Gear Cap

To replace motor brushes:

1. Remove (2) Phillips head screws

securing rear motor cover and

remove cover.

2. Carefully move brush tension spring

aside and remove brush from its

housing (see Figure 19).

3. Install new motor brush and recon-

nect brush tension spring.

4. Repeat Step 2 for remaining motor

brush and re-install rear motor cover.

Figure 19. Removing worn brush (1 of 2).

Brush

Housing

Brush

(1 of 2)

Tool Needed Qty.

Phillip Head Screwdriver #2 ..................... 1

Each sanding head connects to the

motor using a metal gear sprocket (see

Figure 20) with a plastic gear cap. Over

time, the gear cap may become worn,

resulting in loss of power transfer to the

sanding head. Additional gear caps are

provided on the triangular sanding head

(see Figure 20).

To replace the gear cap, carefully remove

the worn gear cap with a pair of pliers,

and place a new cap over the metal gear

sprocket.

Figure 20. Replacing gear cap.

Extra

Caps

Gear Cap

Metal Gear

Sprocket

Model T1239 (Mfd. Since 09/17) -15-

Troubleshooting

Symptom Possible Cause Solution

Motor does not

start or a breaker

trips.

1. Power supply circuit breaker

tripped or fuse blown.

2. Wiring open/has high resis-

tance.

3. Motor brushes worn.

4. ON/OFF trigger broken.

1. Reset circuit breaker or

replace fuse.

2. Check/fix broken, discon-

nected, or corroded wires.

3. Inspect/replace both motor

brushes (Page 14).

4. Replace.

Motor overheats. 1. Motor overloaded. 1. Allow motor to cool; reduce

load on motor.

Machine stalls or is

underpowered.

1. Excessive pressure against

work surface.

2. Sandpaper grit too aggressive

for sanding pad speed.

3. Connection between sanding

head and sanding pad worn.

4. Motor brushes worn.

1. Reduce work surface pres-

sure.

2. Use less-aggressive sand-

paper grit; increase sanding

pad speed.

3. Replace gear cap (Page 14).

4. Inspect/replace both motor

brushes (Page 14).

Dust collection

not functioning

properly.

1. Dust hose connections/fittings

loose.

2. Dust clogging dust hose.

3. Not enough air flow to dust col-

lector.

4. Inadequate dust collection.

1. Tighten dust hose connec-

tions/fittings.

2. Disconnect and clean dust

hose and extenson tube.

3. Adjust pressure collar

hole opening on dust hose

(Page 10).

4. Ensure dust collection sys-

tem provides enough suc-

tion force for application.

Sandpaper will not

attach to sanding

pad.

1. Sandpaper backing worn.

2. Sanding pad hook & loop sur-

face is worn.

1. Replace sandpaper

(Page 11).

2. Replace sanding pad

(Page 13).

SECTION 6: SERVICE

Model T1239 (Mfd. Since 09/17)-16-

Parts Breakdown & List

REF PART # DESCRIPTION REF PART # DESCRIPTION

1 PT1239001 ROUND SANDING HEAD 18 PT1239018 EXTENSION SHAFT

2 PT1239002 TRIANGULAR SANDING HEAD 19 PT1239019 VACUUM HOSE

3 PT1239003 BRUSH RING 20 PT1239020 HANDLE

4 PT1239004 ROUND SANDING PAD (HOOK & LOOP) 21 PT1239021 CONNECTOR (38MM)

5 PT1239005 TRIANGULAR SANDING PAD (HOOK & LOOP) 22 PT1239022 SUCTION ADJUSTMENT RING

6 PT1239006 LOCK LEVER 23 PT1239023 VACUUM ADAPTER (47MM)

7 PT1239007 MOTOR HOUSING 24 PT1239024 VACUUM ADAPTER (45MM)

8 PT1239008 FOLDING LOCK 25 PT1239025 HEX WRENCH 5MM

9 PT1239009 MAIN HANDLE 26 PT1239026 ROUND SANDING DISC 120-GRIT

10 PT1239010 EXTENSION TUBE 27 PT1239027 TRANGULAR SANDING DISC 60-GRIT

11 PT1239011 ON/OFF SWITCH 28 PT1239028 RUBBER GEAR COVERS

12 PT1239012 LOCK BUTTON 29 PT1239029 STORAGE BOX

13 PT1239013 SPEED DIAL 30 PT1239030 RIGHT HANDLE LABEL

14 PT1239014 DUST PORT 31 PT1239031 LEFT HANDLE LABEL

15 PT1239015 EXTENSION TUBE W/ HANDLE 32 PT1239032 RIGHT MOTOR LABEL

16 PT1239016 REAR HANDLE 33 PT1239033 STORAGE BOX LABEL

17 PT1239017 DUST PORT 34 PT1239034 LEFT MOTOR LABEL

Triangle Pad Width: 8-1/2"

Round Pad Dia.: 11-1/4"

Paper Type: Hook & Loop

DRYWALL SANDER

T1239

DRYWALL SANDER

T1239

600W, 120V, 1-Ph, 60 Hz, 15A

DRYWALL SANDER

T1239

DRYWALL SANDER

T1239

DRYWALL SANDER

SECTION 7: PARTS

Please Note: We do our best to stock replacement parts whenever possible, but we cannot guarantee that all parts shown here

are available for purchase. Call (800) 523-4777 or visit our online parts store at www.grizzly.com to check for availability.

BUY PARTS ONLINE!

Scan QR code with your digital

device or visit www.grizzly.com/parts

to purchase replacement parts or

check pricing and availability.

PARTS STORE

WARRANTY

Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original

purchaser from the date of purchase. This warranty does not apply to defects due directly

or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of

maintenance. This is Grizzly’s sole written warranty and any and all warranties that may

be implied by law, including any merchantability or fitness, for any particular purpose, are

hereby limited to the duration of this written warranty. We do not warrant or represent that

the merchandise complies with the provisions of any law or acts unless the manufacturer

so warrants. In no event shall Grizzly’s liability under this warranty exceed the purchase

price paid for the product and any legal actions brought against Grizzly shall be tried in the

State of Washington, County of Whatcom.

We shall in no event be liable for death, injuries to persons or property or for incidental,

contingent, special, or consequential damages arising from the use of our products.

To take advantage of this warranty, contact us by mail or phone and give us all the details.

We will then issue you a “Return Number,’’ which must be clearly posted on the outside

as well as the inside of the carton. We will not accept any item back without this number.

Proof of purchase must accompany the merchandise.

The manufacturers reserve the right to change specifications at any time because they

constantly strive to achieve better quality equipment. We make every effort to ensure that

our products meet high quality and durability standards and we hope you never need to

use this warranty.

Please feel free to write or call us if you have any questions about the machine or the

manual.

Thank you again for your business and continued support. We hope to serve you again

soon.

Grizzly T1239 Owner's manual

Brand: Grizzly

Model: T1239

Category: Vacuum cleaner supplies

Type: Owner's manual

Download PDF

report

Grizzly T1239 Owner's manual

Grizzly T1239 Owner's manual

Related papers

Other documents