DAP Audio COM-ART User manual

COM-ART
DAP Audio
Brand
DAP Audio
Model
COM-ART
Category
Musical Equipment
Type
User manual

This manual is also suitable for

COM-ART V2
Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands
Ordercode: D1414
MANUAL
ENGLISH
1
COM-ART
Table of contents
Warning ............................................................................................................................................................................... 2
Unpacking Instructions ................................................................................................................................................. 2
Safety Instructions ......................................................................................................................................................... 2
Operating Determinations .......................................................................................................................................... 4
Return Procedure .......................................................................................................................................................... 5
Claims .............................................................................................................................................................................. 5
Description of the device ................................................................................................................................................. 6
Features .......................................................................................................................................................................... 6
Frontside.......................................................................................................................................................................... 7
Backside ......................................................................................................................................................................... 7
Installation ........................................................................................................................................................................... 8
Power Supply ................................................................................................................................................................. 8
Replace the Battery ..................................................................................................................................................... 8
Set Up and Operation ....................................................................................................................................................... 9
Location .......................................................................................................................................................................... 9
Connection .................................................................................................................................................................... 9
Power On/Off ..............................................................................................................................................................10
Battery Indicator .........................................................................................................................................................10
Operation .....................................................................................................................................................................10
Frequency Range .......................................................................................................................................................10
Connection Cables .........................................................................................................................................................11
Maintenance ....................................................................................................................................................................12
Product Specifications ....................................................................................................................................................12
Dimensions ........................................................................................................................................................................13
Notes ..................................................................................................................................................................................14
2
COM-ART
Warning
Unpacking Instructions
Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure
that all parts are present and have been received in good condition. Notify the dealer immediately and
retain packing material for inspection if any parts appear damaged from shipping or the carton itself
shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be
returned to the factory, it is important that the fixture be returned in the original factory box and packing.
Your shipment includes:
● DAP Audio COM-AT (transmitter)
● DAP Audio COM-AR (receiver)
● 2 cables mini-USB to USB A
● User manual
Safety Instructions
Every person involved with the installation, operation and maintenance of this system has to:
● be qualified
● follow the instructions of this manual
Before your initial start-up, please make sure that there is no damage caused by transportation. Should
there be any, consult your dealer and do not use the device.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes written in this manual.
Please consider that damages caused by manual modifications to the device are not subject to
warranty. This device contains no user-serviceable parts. Refer servicing to qualified technicians only.
3
COM-ART
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual or any unauthorized modification to the system.
● Always let the device cool down before cleaning or servicing.
● Always disconnect power from the mains, when system is not used. Only handle the power cord by
the plug. Never pull out the plug by tugging the power cord.
● Always operate the unit with the AC ground wire connected to the electrical system ground.
● Avoid flames and do not put close to flammable liquids or gases.
● Avoid ground loops! Always be sure to connect the power amps and the mixing console to the
same electrical circuit to ensure the same phase!
● Before changing the ground, always turn off your amplifier.
● Connecting amplifier outputs to oscilloscopes or other test equipment, while the amplifier is in bridge
mode, may damage both, the amplifier and test equipment.
● Do not connect this device to a dimmer pack.
● Do not drive the inputs with a signal level higher than required to drive the equipment to full output.
● Do not insert objects into air vents.
● Do not open the device and do not modify the device.
● Do not open this device. Risk: hazardous radiation exposure.
● Do not switch the system on and off in short intervals, as this would reduce the system’s life.
● Do not put your equipment next to TV, radio, etc., because of interference or distortion.
● If device is dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.
● If the system has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
switch it on immediately. The arising condensation water might damage your system. Leave the
system switched off until it has reached room temperature.
● If you connect other parts of the system, beware ground loops.
● If your Dap Audio device fails to work properly, discontinue use immediately. Pack the unit securely
(preferably in the original packing material) and return it to your Dap Audio dealer for service.
● In system setup, the amplifier's output power must be 50%-100% higher than the loaded loudspeakers
rated power.
● In typical use, please set the volume to 0dB position.
● Make sure that the amplifier is turned down, before turning the power on or off. In this way you can
avoid supersonic frequencies, which could damage your speakers.
● Make sure that the available voltage is not higher than stated on the rear panel.
● Make sure that the power cord is never crimped or damaged. Check the device and the power
cord from time to time.
● Make sure that the signals coming into the mixer are balanced, otherwise hum could be created.
● Make sure you do not use the wrong kind of cables or defective cables.
● Make sure you use DI boxes to balance unbalanced signals; All incoming signals should be clear
● Never let the power cord come into contact with other cables! Handle the power cord and all
connections with the mains with particular caution!
● Never remove warning or informative labels from the unit.
● Never use anything to cover the ground contact.
● Only use device indoors, avoid contact with water or other liquids.
● Please read this manual carefully and keep it for future reference.
● Please turn off the power switch, when replacing the power cord, signal cable or selecting the input
mode switch.
● Prevent distortion! Make sure that all components connected to the device have sufficient power
ratings. Otherwise, distortion will be generated because the components are operated at their limits.
● Sometimes, when you want to send one signal to more than one amplifier, you should use a signal
distributor.
4
COM-ART
● The best way to avoid ground loops is connecting the electrical system ground to one central point
("star" system). In this case the mixer can act as a central point.
● This device falls under protection class I. Therefore it is essential to connect the yellow/green
conductor to earth.
● The user is responsible for correct positioning and operating of this product. The manufacturer will not
accept liability for damages caused by the misuse or incorrect installation of this device.
● Repairs, servicing and electric connection must be carried out by a qualified technician.
● WARRANTY: Till one year after date of purchase.
Operating Determinations
This system is not designed for permanent operation. Consistent operation breaks will ensure that the
system will serve you for a long time without defects.
If this system is operated in any other way than the one described in this manual, the product may suffer
damages and the warranty becomes void.
Any other operation may lead to dangers like short-circuit, burns, electric shock, etc.
You endanger your own safety and the safety of others!
Improper installation can cause serious damage to people
5
COM-ART
Return Procedure
Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.
Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned
without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.
Call Highlite 0031-455667723 or mail aftersales@highlite.nl and request an RMA prior to shipping the fixture.
Be prepared to provide the model number, serial number and a brief description of the cause for the
return. Be sure to properly pack fixture, any shipping damage resulting from inadequate packaging is the
customer’s responsibility. Highlite reserves the right to use its own discretion to repair or replace
product(s). As a suggestion, proper UPS packing or double-boxing is always a safe method to use.
Note: If you are given an RMA number, please include the following information on a piece of paper
inside the box:
01) Your name
02) Your address
03) Your phone number
04) A brief description of the symptoms
Claims
The client has the obligation to check the delivered goods immediately upon delivery for any short-
comings and/or visible defects, or perform this check after our announcement that the goods are at their
disposal. Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be
reported to the carrier upon receipt of merchandise.
It is the customer's responsibility to notify and submit claims with the shipper in the event that a fixture is
damaged due to shipping. Transportation damage has to be reported to us within one day after receipt
of the delivery.
Any return shipment has to be made post-paid at all times. Return shipments must be accompanied with
a letter defining the reason for return shipment. Non-prepaid return shipments will be refused, unless
otherwise agreed in writing.
Complaints against us must be made known in writing or by fax within 10 working days after receipt of the
invoice. After this period complaints will not be handled anymore.
Complaints will only then be considered if the client has so far complied with all parts of the agreement,
regardless of the agreement of which the obligation is resulting.
6
COM-ART
Description of the device
Features
The COM-ART is a PLL UHF wireless audio set. The set consists of one transmitter and one receiver. The
smart and lightweight design enables you to connect the receiver directly to any amplifier or active
speaker. Both the transmitter and receiver can be powered with an AA battery or a USB power supply.
The device operates properly within the range of 50 meters, in an ideal situation. In order to use the
COM-ART for stereo purposes, you will need to purchase 2 sets. The frequency range 606-630 MHz is
divided into 16 frequency presets.
COM-AT (Transmitter)
Channel: Multi-channel, up to 16 frequency presets per each frequency band
Frequency band: UHF 606-630 MHz, dependent on applicable country regulations
Frequency response: 30 Hz - 17 kHz (±3dB)
Oscillation mode: PLL UHF SYNTHESIZED
Range: <50 m
Frequency stability: ±0.005% (-10 ~ 50°C)
T.H.D.: 1 kHz <0.3%
Modulation mode: FM (F3E)
Signal to noise: >98 dB
Dynamic range: >100 dB
RF output power: 10 mW
Max. balance input/deviation: Max. 8 dBu/±50 kHz
Power requirements: AA (LR6) 1,5V
Power supply: 5V DC (500 mA)
Dimensions: 114 x 22 x 23 mm (LxWxH)
Weight: 0,02 kg
COM-AR (Receiver)
Channel: Multi-channel, up to 16 frequency presets per each frequency band
Frequency band: UHF 606-630 MHz, dependent on applicable country regulations
Receiver type: PLL UHF SYNTHESIZED
Range: <50 m
Frequency response: 30 Hz – 17 kHz (±3dB)
Frequency stability: ±0.005% (-10 ~ 50°C)
T.H.D.: 1 kHz <0.3%
Modulation mode: FM (F3E)
Signal to noise: >98 dB
Dynamic range: >100 dB
RF sensitivity: -100 dBm/12 dB SINAD
Max. balance output/deviation: Max. 8 dBu/±50 kHz
Power requirements: AA (LR6) 1,5V
Power supply: 5V DC (500 mA)
Dimensions: 101 x 22 x 23 mm (LxWxH)
Weight: 0,02 kg
Note: the maximum range of 50 m can only be achieved in an ideal situation, for the best position see
page 9 for more information.
7
COM-ART
Frontside
Fig. 01
COM-AR (receiver) 3-pin XLR IN
5V Mini USB power connector IN
COM-AT (transmitter) 3-pin XLR OUT
5V Mini USB power connector IN
Backside
Fig. 02
LED display
Battery indicator
SET button
8
COM-ART
Installation
Remove all packing materials from the COM-ART. Check if all foam and plastic padding is removed.
Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Power Supply
The COM-ART can be powered with an AA battery, or with the included USB cable connected to an USB
adapter (5V, 500mA).
Note: The USB power inlet is to power the device not to charge the battery. Please don’t apply USB
power when a battery is inserted. It can cause dangerous situations and will damage both battery and
the device. Any warranty will be expired.
Replace the Battery
01) Press and pull the battery cover to open the battery housing.
02) Insert an AA battery (use good disposable batteries or good rechargeable batteries).
03) Replace the battery cover.
Fig. 03
9
COM-ART
Set Up and Operation
Location
For best operation, the COM-AT (transmitter) and the COM-AR (receiver) should be:
Located above the ground, as high as possible,
Positioned away from walls or metal surfaces, to minimize reflections,
The receiver antenna should be kept away from noise sources such as other digital equipment,
microwave ovens or other large metal objects. The device works best when the receivers are
located within the line of sight of the transmitter.
Connection
01) Connect the COM-AT (transmitter) to your mixer’s main XLR output.
02) Connect the COM-AR (receiver) to an amplifier/active speaker.
Fig. 04
Note: In order to produce stereo sound, it is necessary to purchase 2 sets of D1414 (see fig. 04).
10
COM-ART
Power On/Off
01) The device will switch on automatically, upon receiving power. The display will show the currently
selected frequency preset and will blink 3 times. When no button is pressed for 5 seconds, the display
will turn off.
02) In order to switch the device off, press and hold down the SET button (07) for 2 seconds.
03) In order to switch the device on, again press and hold down the SET button (07) for 2 seconds.
Battery Indicator
01) When the device is connected to the appropriate AC power supply or is powered with an AA
battery, the battery indicator (06) will blink in green.
02) When the device is receiving an RF signal, the battery indicator (06) will light in green.
03) If the capacity of the battery is too low, the battery indicator (06) will light in red. Replace the battery
immediately, see page 8 for more information.
Operation
01) Repeatedly press the SET button (07) on both the transmitter and the receiver to select the
corresponding frequency preset. The adjustment range is between 0-9 and A-F.
02) The settings will be stored, even after switching the device off.
03) It is possible to send signals to multiple COM-AR (receivers), as long as they are all set to the same
frequency preset, as the COM-AT (transmitter). No further pairing is required.
Frequency Range
606-630 MHz
Preset
Frequency (MHz)
0
606,125
1
607,625
2
609,050
3
610,425
4
610,900
5
613,525
6
615,100
7
616,475
8
618,000
9
620,075
A
622,975
B
623,975
C
625,050
D
626,975
E
628,425
F
629,975
It is possible that the COM-ART will not function properly within certain frequencies.
It may be caused by the presence of other digital equipment, producing interference.
Try testing all the 16 frequency presets available on the COM-ART, until you find the one
which functions properly.
11
COM-ART
Connection Cables
Take care of your cables by always holding them by the connectors and avoiding knots and twists when
coiling them: This gives the advantage of increasing their lifespan and reliability. Periodically check your
cables. A great number of problems (faulty contacts, ground hum, discharges, etc.) are caused entirely
by using unsuitable or faulty cables.
Unbalanced
Balanced
For these applications the unit provides 1/4" TRS and XLR connectors to easily interface with most
professional audio devices. Follow the configuration examples below for your particular connection.
12
COM-ART
Maintenance
The COM-ART requires almost no maintenance. However, you should keep the unit clean.
Disconnect the mains power supply and wipe with a damp cloth. Do not immerse in liquid. Wipe clean
with a soft cloth. Do not use alcohol or solvents.
Keep connections clean. Disconnect electric power, and then wipe the connections with a damp cloth.
Make sure connections are thoroughly dry before linking equipment or supplying electric power.
Product Specifications
COM-AT (Transmitter)
Channel:
Multi-channel, up to 16 frequency presets per each frequency band
Frequency band:
UHF 606-630 MHz, dependent on applicable country regulations
Frequency response:
30 Hz - 17 kHz (±3dB)
Oscillation mode:
PLL UHF SYNTHESIZED
Range:
<50 m
Frequency stability:
±0.005% (-10 ~ 50°C)
T.H.D.:
1 kHz <0.3%
Modulation mode:
FM (F3E)
Signal to noise:
>98 dB
Dynamic range:
>100 dB
RF output power:
10 mW
Max. balance input/deviation:
Max. 8 dBu/±50 kHz
Power requirements:
AA (LR6) 1,5V
Power supply:
5V DC (500 mA)
Dimensions:
114 x 22 x 23 mm (LxWxH)
Weight:
0,02 kg
COM-AR (Receiver)
Channel:
Multi-channel, up to 16 frequency presets per each frequency band
Frequency band:
UHF 606-630 MHz, dependent on applicable country regulations
Receiver type:
PLL UHF SYNTHESIZED
Range:
<50 m
Frequency response:
30 Hz - 17 kHz (±3dB)
Frequency stability:
±0.005% (-10 ~ 50°C)
T.H.D.:
1 kHz <0.3%
Modulation mode:
FM (F3E)
Signal to noise:
>98 dB
Dynamic range:
>100 dB
RF sensitivity:
-100 dBm/12 dB SINAD
Max. balance output/deviation:
Max. 8 dBu/±50 kHz
Power requirements:
AA (LR6) 1,5V
Power supply:
5V DC (500 mA)
Dimensions:
101 x 22 x 23 mm (LxWxH)
Weight:
0,02 kg
Design and product specifications are subject to change without prior notice.
Website: www.Dap-audio.info
Email: service@highlite.nl
13
COM-ART
Dimensions
14
COM-ART
Notes
©2018 DAP Audio
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

DAP Audio COM-ART User manual

COM-ART
DAP Audio
Brand
DAP Audio
Model
COM-ART
Category
Musical Equipment
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents