Roland M-10MX Owner's manual

M-10MX 40679045 1MP

Note when operating on batteries

If the M-10MX is being operated on batteries and the batteries are running low,

you may experience problems such as distortion or noise in the audio output.

In particular, if you’ve raised the volume of the device (amp, monitor speaker,

etc.) connected to the DIGITAL OUTPUT connector/jack, high-volume noise

may occur.

If this occurs, you should immediately stop using the unit, and install fresh

batteries.

* If you use the M-10MX with an AC adaptor, you will be able to enjoy extended

operation without having to worry about the battery life.

permission of ROLAND CORPORATION.

Download PDF