Kyosho MZW306 Aluminum Shock Stay for 02

The Kyosho MZW306 Aluminum Shock Stay for 02 can be used for two purposes.

Firstly, if you have an MM type chassis and are using the optional Friction Shock Set (No. MZW220), this product can be used together with an LM motor case. Secondly, if you are using an LM type chassis, this product can be used with the Friction Shock Set (No. MZW220).

To assemble the aluminum rear shock stay, you will need to purchase the following parts separately:

• 2X6mm TPE X Screw
• 2X6mm TPEZ Screw
• 2X6mm MEX Flat Head Screw
• 2X6mm MEX Pan Head Screw
• 2X6mm TREX Screw