Copyright 2007 Wind Crest™ by CNP Industries
WCB Low Profile Classic Series Hood – 22” Depth
Featuring Halogen lighting
WCB362S shown click here for additional models
Install Quick Specs
Installation Instructions
Care and Use Manuals
FAQ’s
Back to Top Home Where to Buy
Features:
• 304 Series, 20 gauge Stainless steel
construction
• Seamless, continuous welded seams
• 600 CFM Internal blower – standard
• Electro-mechanical control, with 3 blower
settings (HIGH/MED/LO)
• Dishwasher safe, Commercial grade, high
luster stainless Baffle Filters.
• Halogen lighting (dual 35 watt lamps)
• 6” round vertical or 10” w x 3 ¼” h rectangular
rear discharge options
• 250 Watt Heat Lamp KIT – field convertible
• Indoor applications only
• All Wind Crest products are UL and CUL listed
Sizes:
• 30” and 36”
Finishes:
• Stainless Steel (S), Stainless Steel with
Polished Chrome Accents (SSPC) or White
Optional Accessories:
• 6” or 12” Tall Canopy Extensions in matching
finishes (e.g. 6CE36S or 12CE36S for 36”
wide hood in a stainless steel finish). NOTE:
Specify desired canopy height, width and
finish when ordering.
• Stainless Steel Backsplash with two
drop/down Chrome racks (e.g. "BS36 for 36"
wide hood)
• 250 Watt Heat Lamp KIT (e.g. WSCB30HLKIT
or WSCB36HLKIT) – NOTE: Match kit width to
hood width ordered. Lamps not included.
• Dual Blower Kit for 1100 CFM (VEN110I)
includes (1) 600 CFM blower, mounting
brackets & necessary wiring. Note: For use in
the WSB or WCB models only.
Ventilators:
• 600 CFM Internal blower – comes standard
/
