FEATURE S
• Bluetooth® technology lets you connect
to your smartphone or tablet for music,
movies, and calls.
• Custom speakers and tuning deliver vivid,
high-resolution sound, while the earbuds block
out noise and seal in a rich listening experience.
• We 3D-mapped the human ear to create
comfort-fit eartips that stay put even when
you don’t.
• Three sizes of cushioned eartips and stabilizers
make the fit custom and comfortable for active
use and all day wearing.
• A nano-coating by P2i protects the earbuds
from light rain, humidity, and sweat.
• Convenient inline controls let you adjust
volume, skip tracks, take a quick call, or ask
your smartphone to play a favorite playlist.
• Up to 6.5 hours listen (earbuds); charging case
provides up to a total of 13 hours power for
recharging earbuds*.
For more information about Plantronics
products, visit our website at plantronics.com
For help pairing, visit plantronics.com/pairing
For more help, call our industry-leading customer
service team at 1-866-363-2583 or visit
plantronics.com/support
BACKBEAT GO 3
©2016 BackBeat and Plantronics are trademarks of Plantronics, Inc. registered in the US and other countries. Bluetooth trademarks are owned by Bluetooth SIG Inc., any use by Plantronics is under license. All other trademarks
are the property of their respective owners. 3.16 5205
Cobalt Black Copper Grey
Portable Charging Case
(with select models)
SPECIFICATIONS
Listening time Up to 6.5 hours listen (earbuds); charging case provides up to a total of 13 hours power for recharging earbuds*
Standby time Up to 14 days*
Audio HQ custom SBC codec, 6 mm custom dynamic drivers, Frequency response 20-20,000 Hz, 20 db passive noise
reduction, Total Harmonic Distortion <3%, sensitivity 102 dBspl/mW @ 1 kHz
Noise reduction for calls MEMS microphone with digital signal processing (DSP) and full duplex echo noise reduction
Moisture protection Sweatproof design with nano-coating by P2i on headphones
Charge connector Micro USB charging
Charge time (maximum) 2.5 hours (Power requirements 5V DC - 180 mA)
Battery type Rechargeable, non-replaceable lithium-ion polymer
Bluetooth v3.0 A2DP 1.2, AVRCP v1.5, Wideband audio HFP v1.7, HSP v1.1
Headset battery meter On-screen for iOS devices
Weight 19 g/0.67 oz
Operating + storage temp 14°F to 122°F/-10°C to +50°C
Operating distance (range) Up to 33 ft/10 m from phone or tablet
*Performance is dependent upon battery and may vary by device.
FREE PLANTRONICS APPS
plantronics.com/apps
“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory
has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and
has been certified by the developer to meet Apple performance standards. Apple is not
responsible for the operation of this device or its compliance with safety and regulatory
standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect
wireless performance.
