CYP PU-424HBTE Owner's manual

Type
Owner's manual

This manual is also suitable for

www.cypeurope.com
Control FX RS-232 integration
1. Open the CYP-RS-232matrix.gui in ControlFX guiDesigner.
2. If not already open, open the System Manager sub-window by hitting the cog icon.
Within the System Manager section you will see the CYP Matrix (192.168.9.201) device, within this
you can find all the switch related RS-232 commands already programmed to work the following
CYP matrices;
PU-8H8HBT
PU-8H8HBTE
PU-8H8CTXIR
OR-HD88S
OR-HD88HC
OR-DVI88S
OR-DVI88SA
It can also be used with the 4x4 HDBaseT matrix PU-4H4HBT but please ignore inputs 5-8
and outputs F-H.
3. The IP address will need to be change to the IP address of the hardware you are using. To do this
simple double click the ‘CYP Matrix (192.168.9.201)’ section and in the IP address / Hostname
change to the correct IP address for your hardware.
4. The whole device can now be copied from this project to the project you are presently working
on, or if starting from a new project you can save the project with a new name.
5. You can now build the rest of your ControlFX project as normal, integrating the matrix
commands.
  • Page 1 1

CYP PU-424HBTE Owner's manual

Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI