ADJ Accu Spot 300 User manual

Installing the Omega Clamps is a very easy procedure. Follow the instructions below to properly and

easily install the Omega Clamps.

OMEGA CLAMPS

Install Instructions

1. First and most important, attach the clamp to

your Omega clamp.

2. Locate the large holes at each corner on the bottom of

the xture. Line up the trigger pins with the holes and

rotate the pins unil you feel them slide easily into the

holes.

3. To lock the pins into place apply pressure and rotate

turn the pins clockwise to lock them into place. You

will know when they have locked into place. Test the

Omega clamp by gently pulling it away from the unit. If

it feels loose, or if there is any play in the Omega

clamp, release the clamp and try installing it again.

Customer Support: American DJ® provides a toll free customer support line, to provide set

up help and to answer any question should you encounter problems during your set up or

initial operation. You may also visit us on the web at www.americandj.com for any comments

or suggestions. Service Hours are Monday through Friday 9:00 a.m. to 5:00 p.m. Pacic Stan-

dard Time.

Voice: (800) 322-6337 Fax: (323) 582-2941 E-mail: [email protected]

This manual is also suitable for

Download PDF