Installing the Omega Clamps is a very easy procedure. Follow the instructions below to properly and
easily install the Omega Clamps.
OMEGA CLAMPS
Install Instructions
1. First and most important, attach the clamp to
your Omega clamp.
2. Locate the large holes at each corner on the bottom of
the xture. Line up the trigger pins with the holes and
rotate the pins unil you feel them slide easily into the
holes.
3. To lock the pins into place apply pressure and rotate
turn the pins clockwise to lock them into place. You
will know when they have locked into place. Test the
Omega clamp by gently pulling it away from the unit. If
it feels loose, or if there is any play in the Omega
clamp, release the clamp and try installing it again.
Customer Support: American DJ® provides a toll free customer support line, to provide set
up help and to answer any question should you encounter problems during your set up or
initial operation. You may also visit us on the web at www.americandj.com for any comments
or suggestions. Service Hours are Monday through Friday 9:00 a.m. to 5:00 p.m. Pacic Stan-
dard Time.
/