MODEL HB-121
© 2006 Henny Penny Corporation, Eaton, OH 45320 USA Revised 06/05/09
Hand breader/sifter
PROJECT QUANTITY ITEM NO
General Information
Henny Penny breading systems
are designed to produce a consistent
look and taste to breaded fried or
baked product while saving labor and
counter space, and reducing
breading and product waste.
The HB-121 hand breader/sifter is
a self-contained, portable station that
lets employees dip, bread, sift and
stack food by hand quickly using a
minimum of floor space. Hand
breaders offer the greatest control of
coverage and density.
Standard features
• 300 grade stainless steel frame and
sifting basket.
• Fully enclosed 0.25 hp motor and
drive assembly generates special
“eccentric” sifting action.
• Breading lugs hold 25 lbs. (11.4 kg)
of breading.
• 2 interchangeable lugs—1 for
breading, 1 for sifted breading.
• Angled frames extend legs for
greater stability.
• Removable splash guard.
• Heavy-duty casters, two locking.
• Quick disassembly for easy
cleaning.
• Choose right or left-hand workflow.
Model HB-121 hand breader/sifter configured
for right to left work flow. (Sheet pan sold
separately.)
Henny Penny Corporation
PO Box 60 Eaton OH 45320 USA
+1 937 456.8400 800 417.8417
+1 937 456.8434 Fax 800 417.8434 Fax
www.hennypenny.com
APPROVED APPROVED AS NOTED RESUBMIT
AUTHORIZED SIGNATURE DATE
67 5/8 in. (1718 mm)
26 1/2 in. (673 mm)
47 1/4 in. (1200 mm)
Bidding Specifications
• Provide Henny Penny hand breader/sifter
model HB-121 designed to integrate all
aspects of breading into a single portable
station.
• Frame and sifting basket shall be
constructed of 300 grade welded stainless
steel. Breading lugs are of rugged, inert
polyethylene.
• Units shall feature motorized “eccentric”
sifting action to maximize breading usage.
• Units shall be designed with angled and
braced legs for greater stability.
• Unit includes 1 dip pot, 1 dip basket, 1 drip
tray, 2 plastic lugs, 1 lug plug, 1 sifter, 4
casters (2 locking), 9 ft. (2.7 m) power cord
and plug.
Work flow configuration
Please specify:
Left to right work flow (dip pot on left)
Right to left work flow (dip pot on right)
Product capacity: 25 lbs. (11.3 kg)
Electrical: 0.25 h
moto
Dimensions
Height: 47 1/4 in. (1200 mm)
Width: 67 5/8 in. (1718 mm)
Depth: 26 1/2 in. (673 mm)
Crated weight 180 lbs. (82 kg)
Crated dimensions
Length: 37 3/8 in. (949 mm)
Depth: 25 1/4 in. (641 mm)
Height: 51 in. (1295 mm)
Volume: 27.9 cu. ft. (0.78 m³)
Volts Phase Cycle/Hz Watts Amps Wire Plug
120 1 60 504 4.5 2+G
G
W
NEMA 5-15P
240 1 50 790 1.5 2+G N/A
Laboratory certifications