❏ Reviewed with Customer (Please Check Box)
Refer to Owner Manual for more information.
RADIO CONTROLS
Power and Volume
Press the PWR/VOL knob to turn the
radio on/off. Turn the knob to the
desired volume setting.
Select Band
Press the BAND button to select AM,
FM1, FM2, WEATHER, XM1 or XM2.
Select Radio, Cassette, or CD
Press the SOURCE button to select
Radio, Cassette or CD. Your choice
will be displayed.
Set the Clock
Press and hold the HR or MN button.
Release the button as you get close
to the correct hour or minute. Tap
the button to set the exact hour or
minute.
Tone
Press and release the TONE button to
select desired tone control (Bass,
Treble or Midrange). Press the
– LEVEL + button to increase or
decrease the Bass, Treble or
Midrange.
Balance/Fade
Press and release the speaker side of
the TONE button to select Balance or
Fade control. Press the – LEVEL+
button to adjust the sound to the
left/right or front/rear speakers.
Set Stations
The six numbered pushbuttons let
you set up to 18 stations (six AM, six
FM1 and six FM2).
Turn the radio on. Select the Band.
Tune in the station.
Press and hold one of the
pushbuttons marked 1, 2, 3, 4, 5, 6
until a chime is heard. Repeat for
each pushbutton.
Scan the Stations/Preset Stations
Press the SCAN button for less than 2
seconds and the radio will play each
station for 5 seconds. Press and
release the SCAN button again to
stop scanning. Press and hold the
SCAN button for more than 2
seconds to scan each of the preset
stations.
Tune/Seek Stations
Press the top of the button to the first
position to TUNE a station. Press the
bottom of the button to SEEK a
station.
PTY (Program Type)
Press to actuate channel category
mode and – LEVEL+ to scroll
categories. Use TUNE/SEEK or SCAN
to search category type stations.
Convenience
Features
Driver
Information
Audio Systems
Personalization
Guide
Maintenance
3355 Seville 9/3/03 6:59 PM Page 9