Quick Setup Guide
Thank you for puchasing a Core Internet tablet from Naxa Electronics.
Befor read the User’s Guide and
save it for your reference. Then, read this guide to learn how to get
started quickly with your new tablet.
This guide covers: 1) How to turn the tablet on; 2) How to unlock the screen;
3) How to add an account, and 4) How to connect wirelessly to the Internet.
1) How to turn the tablet on
Pr reen turns
ready to be used.
By default, the tablet will turn off the scr
in or r. Pr
the tablet and turn the screen back on.
2) How to unlock the screen
show you how to get started with your tablet.
When the tablet is woken from
sleep, the screen will be locked.
Tap and hold the lock icon an
open lock will appear on the
screen. Slide your finger to
meet the open lock.
NID-9000
3) How to add an account
Your tablet works best when it is paired with a Google account. Google
provides many services that can unleash the power of your tablet - all
free of charge!
1. Tap the clock.
2. Tap the Sengs icon.
3. Tap Sengs to view the sengs
screen.
4. Scroll the le panel down unl you
see the ACCOUNTS secon. Tap Add account.
5. Tap Google to start adding a Google account.
4) How to connect to the Internet
If you don’t have a Google account, sign up for a new
one. Otherwise, tap Exisng to link your Google account
to your tablet. Follow the on-screen instrucons to
finish adding your Google account.
If the tablet is not connected to the Internet, the tablet
will turn the Wi-Fi radio on and walk you through some
steps in order to get connected.
Note: You will need a Wi-Fi router that supports the “802.11 n” standard.
The router must be connected to the Internet and configured to allow
devices to connect to it. The router should also be set to broadcast the
network name (SSID).
If you do not have a Wi-Fi router, contact your Internet Service Provder
(ISP). Most ISPs will be able to provide and configure a router for you.
Many cafés, restaurants, airports, parks, and other public spaces provide
Wi-Fi network access for free. Your tablet will scan for all available
networks. Some networks may be open while some are password
protected.
Aer the tablet turns on the Wi-Fi radio automacally, the tablet will scan
for available networks. (You can also turn the Wi-Fi radio on from the
Sengs screen.)
1. Tap the name of your network to select it from the list.
2. If your network is secured by a password, enter the password and
then tap Connect.
3. To finish connecng to your network and return to adding your
Google account, tap Next.
Follow the on-screen instrucons to finish adding your account.
-
1
-
2
-
3
