Cisco MDS 9000 Series Command Reference Manual

Category
Software
Type
Command Reference Manual
Send documentation comments to mdsfeedbac[email protected]
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Cisco MDS 9000 Family Command
Reference
Cisco MDS SAN-OS Release 3.0(1) Through 3.2(1)
August 2007
Send documentation comments to mdsfeedbac[email protected]
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL
STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT
WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.
THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT
SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE
OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.
The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB’s public
domain version of the UNIX operating system. All rights reserved. Copyright © 1981, Regents of the University of California.
NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED “AS IS” WITH
ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT
LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF
DEALING, USAGE, OR TRADE PRACTICE.
IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING,
WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO
OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Cisco MDS 9000 Family Command Reference
© 2003–2007 Cisco Systems, Inc. All rights reserved.
C
CVP, the Cisco logo, and the Cisco Square Bridge logo are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn is a service mark of Cisco Systems,
I
nc.; and Access Registrar, Aironet, BPX, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco
Press,
C
isco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Enterprise/Solver, EtherChannel, EtherFast, EtherSwitch, Fast Step, Follow Me Browsing,
F
ormShare, GigaDrive, HomeLink, Internet Quotient, IOS, iPhone, IP/TV, iQ Expertise, the iQ logo, iQ Net Readiness Scorecard, iQuick Study, LightStream, Linksys,
M
eetingPlace, MGX, Networking Academy, Network Registrar, Pa cket , PIX, ProConnect, ScriptShare, SMARTnet, StackWise, The Fastest Way to Increase Your Internet
Q
uotient, and TransPath are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.
A
ll other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word partner does not imply a partnership relationship
b
etween Cisco and any other company. (0705R)
Send documentation comments to mdsfeedbac[email protected]
iii
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
CONTENTS
New and Changed Information xxxiii
Preface xlix
Audience xlix
Organization xlix
Document Conventions l
Related Documentation lii
Release Notes lii
Compatibility Information lii
Regulatory Compliance and Safety Information lii
Hardware Installation lii
Cisco Fabric Manager liii
Command-Line Interface liii
Troubleshooting and Reference liii
Installation and Configuration Note liii
Obtaining Documentation liii
Cisco.com liv
Product Documentation DVD liv
Ordering Documentation liv
Documentation Feedback liv
Cisco Product Security Overview liv
Reporting Security Problems in Cisco Products lv
Product Alerts and Field Notices lvi
Obtaining Technical Assistance lvi
Cisco Technical Support & Documentation Website lvi
Submitting a Service Request lvii
Definitions of Service Request Severity lvii
Obtaining Additional Publications and Information lviii
CHAPTER
1CLI Overview 1-1
About the Switch Prompt 1-2
About the CLI Command Modes 1-3
Understanding CLI Command Hierarchy 1-4
EXEC Mode Options 1-5
Send documentation comments to mdsfeedbac[email protected]
Contents
iv
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
EXEC Mode Commands for the Cisco MDS 9000 Family 1-5
EXEC Mode Commands for the Cisco Fabric Switch for HP c-Class BladeSystem and the Cisco
Fabric Switch for IBM BladeCenter 1-6
Configuration Mode Options 1-7
Configuration Mode Commands for the Cisco MDS 9000 Family 1-7
Configuration Mode Commands for the Cisco Fabric Switch for HP c-Class BladeSystem and the
Cisco Fabric Switch for IBM BladeCenter 1-9
Navigating Through CLI Commands 1-13
Getting Help 1-13
Command Completion 1-14
Using the no and Default Forms of Commands 1-14
Port Names and Port Mapping 1-15
Entering CLI Commands 1-17
Viewing Switch Configurations 1-17
Saving a Configuration 1-19
Clearing a Configuration 1-20
Searching and Filtering CLI Output 1-20
Multiple Filter Commands 1-21
Searching and Filtering CLI Output Examples 1-21
Displaying Users 1-24
Sending Messages to Users 1-25
Using the ping Command 1-25
Using traceroute 1-25
Setting the Switch’s Shell Timeout 1-26
Displaying VTY Sessions 1-26
Clearing VTY Sessions 1-26
Setting the Switch’s Terminal Timeout 1-27
Setting the Switch’s Terminal Type 1-27
Setting the Switch’s Terminal Length 1-27
Setting the Switch’s Terminal Width 1-27
Displaying Terminal Settings 1-28
Using CLI Variables 1-28
User-Defined CLI Session Variables 1-28
User-Defined CLI Persistent Variables 1-29
System Defined Variables 1-30
Using Command Aliases 1-30
Defining Command Aliases 1-31
About Flash Devices 1-31
Internal bootflash: 1-32
External CompactFlash (Slot0) 1-32
Send documentation comments to mdsfeedbac[email protected]
Contents
v
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Formatting Flash Disks and File Systems 1-32
Initializing bootflash: 1-32
Formatting Slot0: 1-33
Using the File System 1-33
Setting the Current Directory 1-34
Displaying the Current Directory 1-34
Listing the Files in a Directory 1-34
Creating a New Directory 1-34
Deleting an Existing Directory 1-35
Moving Files 1-35
Copying Files 1-35
Deleting Files 1-36
Displaying File Contents 1-36
Saving Command Output to a File 1-36
Directing show Command Output to a File 1-37
Compressing and Uncompressing Files 1-37
Displaying the Last Line in a File 1-38
Executing Commands Specified in a Script 1-38
Setting the Delay Time 1-39
Role-Based CLI 1-39
Using Valid Formats and Ranges 1-40
Using Debug Commands 1-41
Generating debug Command Output 1-42
Redirecting debug and Error Message Output 1-42
Enabling Message Logging 1-43
Setting the Message Logging Levels 1-43
Limiting the Types of Logging Messages Sent to the Console 1-44
Logging Messages to an Internal Buffer 1-44
Limiting the Types of Logging Messages Sent to Another Monitor 1-44
Logging Messages to a UNIX Syslog Server 1-45
Limiting Messages to a Syslog Server 1-45
CHAPTER
2A Commands 2-1
aaa accounting logsize 2-2
aaa accounting default 2-3
aaa authentication dhchap default 2-4
aaa authentication iscsi default 2-5
aaa authentication login 2-6
Send documentation comments to mdsfeedbac[email protected]
Contents
vi
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
aaa authentication login password-aging enable 2-8
aaa group server 2-9
abort 2-11
active equals saved 2-12
alert-group 2-13
arp 2-15
attach 2-16
attachpriv 2-17
attribute qos 2-18
authentication 2-19
autonomous-fabric-id (IVR topology database configuration) 2-21
autonomous-fabric-id (IVR service group configuration) 2-23
autonomous-fabric-id database 2-25
CHAPTER
3B Commands 3-1
banner motd 3-2
boot 3-4
bport 3-6
bport-keepalive 3-7
broadcast 3-8
CHAPTER
4C Commands 4-1
callhome 4-2
callhome test 4-4
cd 4-5
cdp 4-6
cfs distribute 4-8
cfs ipv4 distribute 4-10
cfs ipv4 mcast-address 4-12
cfs ipv6 distribute 4-14
cfs ipv6 mcast-address 4-16
cfs region 4-18
channel mode active 4-20
channel-group 4-21
cimserver 4-22
class 4-24
Send documentation comments to mdsfeedbac[email protected]
Contents
vii
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
clear accounting log 4-26
clear arp-cache 4-27
clear callhome session 4-28
clear cdp 4-29
clear cores 4-30
clear counters (EXEC mode) 4-31
clear counters (SAN extension N port configuration mode) 4-32
clear crypto ike domain ipsec sa 4-33
clear crypto sa domain ipsec 4-34
clear debug-logfile 4-35
clear device-alias 4-36
clear dpvm 4-37
clear fabric-binding statistics 4-38
clear fcanalyzer 4-39
clear fcflow stats 4-40
clear fcns statistics 4-41
clear fcs statistics 4-42
clear fctimer session 4-43
clear fc-redirect config vt 4-44
clear ficon 4-45
clear fspf counters 4-46
clear install failure-reason 4-47
clear ip access-list counters 4-48
clear ips arp 4-49
clear ips stats 4-50
clear ips stats fabric interface 4-51
clear ipv6 access-list 4-52
clear ipv6 neighbors 4-53
clear islb session 4-54
clear ivr fcdomain database 4-55
clear ivr service-group database 4-56
clear ivr zone database 4-57
clear license 4-58
clear line 4-59
clear logging 4-60
Send documentation comments to mdsfeedbac[email protected]
Contents
viii
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
clear ntp 4-61
clear port-security 4-62
clear processes log 4-64
clear qos statistics 4-65
clear radius session 4-66
clear rlir 4-67
clear role session 4-69
clear rscn session vsan 4-70
clear rscn statistics 4-71
clear santap module 4-72
clear ssm-nvram santap module 4-73
clear scheduler logfile 4-74
clear screen 4-75
clear scsi-flow statistics 4-76
clear sdv 4-77
clear ssh hosts 4-78
clear system reset-reason 4-79
clear tacacs+ session 4-80
clear tlport alpa-cache 4-81
clear user 4-82
clear vrrp 4-83
clear zone 4-84
cli alias name 4-85
cli var name (EXEC) 4-87
cli var name (configuration) 4-89
clock 4-90
clock set 4-92
cloud discover 4-93
cloud discovery 4-94
cloud-discovery enable 4-96
code-page 4-97
commit 4-98
contract-id 4-99
configure terminal 4-100
copy 4-101
Send documentation comments to mdsfeedbac[email protected]
Contents
ix
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
copy licenses 4-104
copy ssm-nvram standby-sup 4-105
crypto ca authenticate 4-106
crypto ca crl request 4-108
crypto ca enroll 4-110
crypto ca export 4-112
crypto ca import 4-114
crypto ca test verify 4-116
crypto ca trustpoint 4-117
crypto global domain ipsec security-association lifetime 4-119
crypto ike domain ipsec 4-120
crypto ike domain ipsec rekey sa 4-121
crypto ike enable 4-122
crypto ipsec enable 4-123
crypto key generate rsa 4-124
crypto key zeroize rsa 4-126
crypto map domain ipsec (configuration mode) 4-128
crypto map domain ipsec (interface configuration submode) 4-130
crypto transform-set domain ipsec 4-131
customer-id 4-133
CHAPTER
5D Commands 5-1
data-pattern-file 5-2
deadtime (radius group configuration) 5-3
deadtime (tacacs+ group configuration) 5-4
delete 5-5
delete ca-certificate 5-7
delete certificate 5-8
delete crl 5-10
deny (IPv6-ACL configuration) 5-11
destination interface 5-14
destination-profile 5-16
device-alias (IVR fcdomain database configuration submode) 5-18
device-alias (SDV virtual device configuration submode) 5-19
device-alias abort 5-20
device-alias commit 5-21
Send documentation comments to mdsfeedbac[email protected]
Contents
x
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
device-alias database 5-22
device-alias distribute 5-23
device-alias import fcalias 5-24
device-alias name 5-25
dir 5-26
disable 5-28
discover custom-list 5-29
discover scsi-target 5-30
distribute 5-32
do 5-33
dpvm abort 5-35
dpvm activate 5-36
dpvm auto-learn 5-37
dpvm commit 5-39
dpvm database 5-40
dpvm database copy active 5-41
dpvm database diff 5-42
dpvm distribute 5-44
dpvm enable 5-45
dscp 5-46
duplicate-message throttle 5-47
CHAPTER
6Debug Commands 6-1
debug aaa 6-2
debug all 6-4
debug biosd 6-5
debug bootvar 6-6
debug callhome 6-7
debug cert-enroll 6-9
debug cdp 6-11
debug cfs 6-13
debug cimserver 6-15
debug cloud 6-16
debug core 6-18
debug device-alias 6-19
debug dpvm 6-21
Send documentation comments to mdsfeedbac[email protected]
Contents
xi
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
debug dstats 6-23
debug ethport 6-24
debug exceptionlog 6-26
debug fabric-binding 6-27
debug fc-tunnel 6-29
debug fc2 6-31
debug fc2d 6-34
debug fcc 6-36
debug fcdomain 6-38
debug fcfwd 6-40
debug fcns 6-42
debug fcs 6-44
debug fcsp-mgr 6-46
debug fdmi 6-48
debug ficon 6-50
debug flogi 6-52
debug fm 6-54
debug fspf 6-56
debug hardware arbiter 6-59
debug idehsd 6-60
debug ike 6-61
debug ilc_helper 6-62
debug ipacl 6-63
debug ipconf 6-64
debug ipfc 6-65
debug ips 6-66
debug ipsec 6-68
debug isns 6-70
debug ivr 6-72
debug klm 6-74
debug license 6-76
debug logfile 6-77
debug mcast 6-79
debug mip 6-81
debug module 6-82
Send documentation comments to mdsfeedbac[email protected]
Contents
xii
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
debug ntp 6-83
debug npv 6-84
debug obfl 6-86
debug platform 6-87
debug plog 6-89
debug port 6-90
debug port-channel 6-92
debug port-resources 6-93
debug qos 6-95
debug radius 6-96
debug rd-reg 6-98
debug rdl errors 6-99
debug rib 6-100
debug rlir 6-101
debug rscn 6-102
debug san-ext-tuner 6-103
debug scsi-flow 6-105
debug scsi-target 6-107
debug sdv 6-108
debug security 6-110
debug sensor 6-111
debug snmp 6-112
debug span 6-114
debug system health 6-116
debug tacacs+ 6-118
debug tcap 6-120
debug tlport 6-121
debug ttyd 6-122
debug vni 6-123
debug vrrp 6-124
debug vsan 6-126
debug wr-reg 6-128
debug wwn 6-129
debug xbar 6-131
debug xbar_driver 6-132
Send documentation comments to mdsfeedbac[email protected]
Contents
xiii
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
debug xbc 6-133
debug zone 6-134
CHAPTER
7E Commands 7-1
email-contact 7-2
enable 7-3
encryption 7-4
end 7-5
enrollment terminal 7-6
exit 7-7
CHAPTER
8F Commands 8-1
fabric-binding activate 8-2
fabric-binding database copy 8-4
fabric-binding database diff 8-5
fabric-binding database vsan 8-6
fabric-binding enable 8-8
fcalias clone 8-9
fcalias name 8-10
fcalias rename 8-11
fcanalyzer 8-12
fcc enable 8-14
fcc priority 8-15
fcdomain 8-16
fcdomain abort vsan 8-19
fcdomain commit vsan 8-20
fcdomain distribute 8-21
fcdomain rcf-reject 8-22
fcdroplatency 8-23
fcflow stats 8-25
fcid-allocation 8-27
fcid-last-byte 8-29
fcinterop fcid-allocation 8-30
fcinterop loop-monitor 8-31
fcip enable 8-32
fcip profile 8-33
Send documentation comments to mdsfeedbac[email protected]
Contents
xiv
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
fcns proxy-port 8-34
fcns reject-duplicate-pwwn vsan 8-35
fcping 8-36
fcroute 8-38
fcrxbbcredit extended enable 8-40
fcs plat-check-global vsan 8-41
fcs register 8-42
fcs virtual-device-add 8-43
fcsp 8-44
fcsp dhchap 8-46
fcsp enable 8-49
fcsp timeout 8-50
fctimer 8-51
fctimer abort 8-52
fctimer commit 8-53
fctimer distribute 8-54
fctrace 8-55
fc-tunnel 8-56
ficon enable 8-58
ficon logical-port assign port-numbers 8-60
ficon port default-state prohibit-all 8-61
ficon slot assign port-numbers 8-62
ficon swap 8-64
ficon-tape-accelerator vsan 8-66
ficon vsan (EXEC mode) 8-68
ficon vsan (configuration mode) 8-70
file 8-71
find 8-72
format 8-73
fspf config vsan 8-74
fspf cost 8-76
fspf dead-interval 8-77
fspf enable vsan 8-78
fspf hello-interval 8-79
fspf passive 8-80
Send documentation comments to mdsfeedbac[email protected]
Contents
xv
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
fspf retransmit-interval 8-81
CHAPTER
9G Commands 9-1
group 9-2
gzip 9-3
gunzip 9-5
CHAPTER
10 H Commands 10-1
hash 10-2
host 10-3
hw-module logging onboard 10-5
CHAPTER
11 I Commands 11-1
identity 11-2
in-order-guarantee 11-4
initiator 11-5
install all 11-6
install clock-module 11-12
install license 11-14
install module bios 11-15
install module epld 11-16
install module loader 11-18
install ssi 11-19
interface 11-20
interface bay | ext 11-22
interface fc 11-23
interface fc-tunnel 11-25
interface fcip 11-27
interface gigabitethernet 11-30
interface iscsi 11-32
interface mgmt 11-34
interface port-channel 11-35
interface vsan 11-37
ip access-group 11-38
ip access-list 11-40
ip address (FCIP profile configuration submode) 11-43
Send documentation comments to mdsfeedbac[email protected]
Contents
xvi
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
ip address (interface configuration) 11-44
ip-compression 11-45
ip default-gateway 11-47
ip default-network 11-48
ip domain-list 11-49
ip domain-lookup 11-50
ip domain-name 11-51
ip name-server 11-52
ip route 11-53
ip routing 11-54
ips netsim delay-ms 11-55
ips netsim delay-us 11-56
ips netsim drop nth 11-57
ips netsim drop random 11-59
ips netsim enable 11-61
ips netsim max-bandwidth-kbps 11-62
ips netsim max-bandwidth-mbps 11-63
ips netsim qsize 11-64
ips netsim reorder 11-65
ipv6 access-list 11-67
ipv6 address 11-68
ipv6 address autoconfig 11-70
ipv6 enable 11-71
ipv6 nd 11-72
ipv6 route 11-74
ipv6 routing 11-76
ipv6 traffic-filter 11-77
iscsi authentication 11-78
iscsi duplicate-wwn-check 11-80
iscsi dynamic initiator 11-82
iscsi enable 11-84
iscsi enable module 11-85
iscsi import target fc 11-86
iscsi initiator idle-timeout 11-87
iscsi initiator ip-address 11-88
Send documentation comments to mdsfeedbac[email protected]
Contents
xvii
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
iscsi initiator name 11-90
iscsi interface vsan-membership 11-91
iscsi save-initiator 11-93
iscsi virtual-target name 11-95
islb abort 11-98
islb commit 11-99
islb distribute 11-100
islb initiator 11-102
islb save-initiator 11-104
islb virtual-target name 11-106
islb vrrp 11-108
islb zoneset activate 11-110
isns 11-111
isns distribute 11-113
isns esi retries 11-114
isns profile name 11-115
isns reregister 11-116
isns-server enable 11-117
ivr abort 11-118
ivr commit 11-119
ivr copy active-service-group user-configured-service-group 11-120
ivr copy active-topology user-configured-topology 11-121
ivr copy active-zoneset full-zoneset 11-122
ivr copy auto-topology user-configured-topology 11-123
ivr distribute 11-124
ivr enable 11-125
ivr fcdomain database autonomous-fabric-num 11-126
ivr nat 11-127
ivr refresh 11-128
ivr service-group activate 11-129
ivr service-group name 11-131
ivr virtual-fcdomain-add 11-133
ivr vsan-topology 11-134
ivr vsan-topology database 11-136
ivr withdraw domain 11-138
Send documentation comments to mdsfeedbac[email protected]
Contents
xviii
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
ivr zone name 11-139
ivr zone rename 11-140
ivr zoneset 11-141
ivr zoneset rename 11-142
CHAPTER
12 J Commands 12-1
job name 12-2
CHAPTER
13 K Commands 13-1
keepalive 13-2
kernel core 13-3
key 13-5
CHAPTER
14 L Commands 14-1
lifetime seconds 14-2
line com1 14-3
line console 14-6
line vty 14-9
link (SDV virtual device configuration submode) 14-10
link-state-trap 14-11
logging abort 14-12
logging commit 14-13
logging console 14-14
logging distribute 14-15
logging level 14-16
logging logfile 14-17
logging module 14-18
logging monitor 14-19
logging server 14-20
logging timestamp 14-22
CHAPTER
15 M Commands 15-1
match 15-2
match address 15-4
mcast root 15-5
member (fcalias configuration submode) 15-6
Send documentation comments to mdsfeedbac[email protected]
Contents
xix
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
member (ivr zone configuration) 15-8
member (zone configuration and zoneset-zone configuration submode) 15-10
member (zoneset configuration submode) 15-12
metric (iSLB initiator configuration) 15-13
mkdir 15-14
modem connect line 15-15
move 15-16
mutual-chap username (iSCSI initiator configuration and iSLB initiator configuration) 15-17
CHAPTER
16 N Commands 16-1
nasb module 16-2
nasb rediscover module 16-4
native-autonomous-fabric-num 16-5
npiv enable 16-6
nport pwwn 16-7
npv enable 16-8
ntp 16-9
ntp abort 16-10
ntp commit 16-11
ntp distribute 16-12
ntp sync-retry 16-13
nwwn (DPVM database configuration submode) 16-14
nwwn (SAN extension configuration mode) 16-15
CHAPTER
17 O Commands 17
ocsp url 18
out-of-service 20
out-of-service module 22
out-of-service xbar 23
CHAPTER
18 P Commands 17-1
passive-mode 17-2
peer-info ipaddr 17-3
periodic-inventory notification 17-5
permit (IPv6-ACL configuration) 17-6
phone-contact 17-9
Send documentation comments to mdsfeedbac[email protected]
Contents
xx
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
ping 17-10
policy 17-12
port 17-13
port-channel persistent 17-14
port-license 17-15
port-security 17-16
port-security abort 17-19
port-security commit 17-20
port-security database 17-21
port-security distribute 17-23
port-security enable 17-24
port-track enable 17-25
port-track force-shut 17-26
port-track interface 17-27
portaddress 17-29
power redundancy-mode 17-31
poweroff module 17-33
priority 17-34
purge fcdomain fcid 17-36
purge module 17-37
pwc 17-38
pwd 17-39
pwwn (DPVM database configuration submode) 17-40
pwwn (fcdomain database configuration submode) 17-41
pwwn (SDV virtual device configuration submode) 17-42
CHAPTER
19 Q Commands 18-1
qos class-map 18-2
qos control priority 18-3
qos dwrr-q 18-4
qos enable 18-5
qos policy-map 18-6
qos priority 18-7
qos service 18-8
quiesce 18-9
1 / 1

Cisco MDS 9000 Series Command Reference Manual

Category
Software
Type
Command Reference Manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Ask the document