Malem Ultimate Vibro-Watch + Operating instructions

Brand
Malem
Model
Ultimate Vibro-Watch +
Category
Watches
Type
Operating instructions
IMPORTANT
Please read this instruction
sheet before use
Malem
™
Ultimate Vibro-Watch
Operation Manual
1. The Display:
The ALARM icon is visible when any of
the 12 alarms is set, selected and
activated.
The CHIME icon is visible when the
hourly chime is activated (Vibration
only).
ALARM SELECTION icon is visible
during the setting mode when the
chosen alarm time is selected. During
normal Real Time display this icon is
NOT visible.
The PERIODIC AUTO-REPEAT
ALARM icon is visible when the
periodic timer is set and activated.
2. Key Assignments
“S”- Set key: Press and hold to change
setting
“M”- Mode
select key: Press for Stopwatch,
Auto-Repeat Timer, Alarm & Alarm/Timer
On/Off
“C”- Change key: Press to change, adjust
settings and activate Chime
“B”- Blank key: No function
3. How to set the correct Time & Date:
· press and hold S until seconds start
flashing
· press C to zero second
· press S once, minute start flashing
· press C to advance to correct time
· press S once, hour starts flashing
· press C to advance to correct time, toggle
am/pm using M
· press S once, month starts flashing
· press C to select correct month
· press S once, day of month is flashing
· press C to select correct day of month
· press S once, day of week starts flashing
· press C to select correct day of week
· press S to end and display normal time,
date and day of week or seconds
· press S to toggle day of week or seconds
4. Stopwatch:
· press M once
· start timer by pressing S
· stop timer by pressing S
· zero timer by pressing C
5. Periodic Auto-Repeat Timer setting:
· press M twice
· press and
hold C to zero the display
· press and hold S until minutes start flashing
· press C to select minute timer setting
(Range 1 min to 59 minutes)
· press S once, hour start flashing
· press C to select hour timer setting
(Range 0 to 23 hours)
· press S to start timer
· press C once to display original selected
timer setting
· press and hold C to zero the timer
· press M to go back to real time display
· to activate, make sure Auto-Repeat Timer
( ) is showing in the activate/deactivate
vibrating alarm window (see 7). Once
activated, the
symbol will show in the
normal time display window.
6. 12 Specific Time Vibrating Alarm setting:
· press M three times
· press S repeatedly until the desired alarm
number (1 to 12) is displayed (1-3-5-7-9-11)
· press and hold S until minutes start flashing
· press C to adjust minutes alarm setting
· press S once, hour starts flashing
· press C to adjust hour alarm setting
· press S to set the alarm time
· press C to select the set alarm (symbol will
show )
·
to de-select the alarm press C again
(no symbol)
· press S to move to the next alarm number
· repeat as above
· press M to go back to real time display
To activate, the selected make sure Specific
Time Vibrating Alarm ( ) is showing in the
activate/deactivate vibrating alarm window
(see 7). Once activated, the symbol
and the alarm numbers will show in the
normal time window.
7. To activate/deactivate selected Specific-
Time Vibrating Alarms or Periodic Auto-
Repeat Vibrating Alarm:
Alarm Activation/Deactivation
·
press M four times until --:-- ( ) or ( ) or
( ) is displayed.
· press S to select ( ) to activate the 12
specific time alarms (or the selected ones
that are set and selected).
· press S to select ( ) to activate the
periodic auto-repeat alarm.
· press S to select ( ) to deactivate both
alarm systems with out losing the settings.
Useful if not to be disturbed during the
night with periodic auto - repeat timer.
If either Specific-Time alarm or Periodic
Auto-Repeat alarm is not set and selected,
then the option for that alarm will not be
visible
Please note that you can not activate
both alarm systems at the same time.
8. Chime Alarm:
· press C when real time is displayed on the
hour vibrating chime will be set and
activated
· press C again to deactivate and cancel
vibrating chime
9. Vibrating Alarm duration & deactivation
· the vibrating alarm will last for 15 seconds
· press any of the four keys (B, C, S or M) to
stop the vibration
Please note
that the Malem Vibro-Watch
has no back light nor sound.
10. Battery replacement: It is best to use a
watch repair shop to prevent damage to the
watch. Battery: CR2032
1. Twist battery cover (3 degrees, see arrows
by the right hand sides of the battery cover)
anti-clockwise to remove the old battery
(use appropriate coin). Ease/loosen cover.
2. Press all four buttons at the same time for
three seconds and release.
3. Make sure you do NOT lose the O ring.
4. Place new battery in battery cover with the
correct polarity
.
5. Line up dot on cover with open arrow on
back.
6. Insert in battery compartment making sure
that contact is made once and not
repeatedly as this may blank or corrupt the
display and prevent the watch from working
(watch will vibrate).
7. Turn cover with coin to closed position.
8. If the watch display is blank or corrupted,
start at step 1.
11. Guarantee:
The Malem Vibro-Watch guarantee covers
manufacturing defects for one year from date
of purchase.
It does NOT cover battery, glass,
strap discolouration or damage caused by
wear and tear, water, abuse or misuse.
12. Disclaimer:
Please note that the Malem Vibro-Watch is
designed as a helpful and discreet vibration
reminder. It is not intended to replace human
care or supervision and the manufacturer,
Malem Medical, is not responsible for any
consequences resulting from watch use,
misuse or failure.
14. Copyright:
Malem© and Vibro-Watch© are copyright
protected. ©
2008 Malem Medical.
Malem Medical reserve the right to
change the specifications without
prior notice.
Malem Vibro-Watch
©
Information Sheet
IMPORTANT
Please read this instruction sheet
before use
1 - 3 - 5 - 7 - 9 - 11 -
Hour Minutes
Day/
Seconds
Repeat
Timer
Chime
Alarm
Select
Alarm
Date
Month
AM
PM
Alarms
Blank
Change Mode
Set
M
O
D
E
L
:
M
O
-
1
0
CR2032
+
-
CLO SE
OPE N
Carefully loosen
the battery lid.
Use a coin &
twist anticlockwise
no more than
3 degrees.
B
CR2032
+
-
Malem Medical, 10 Willow Holt, Lowdham, Nottingham NG14 7EJ, England, UK
Tel: + 44 (0)115 966 4440 Fax: + 44 (0)115 966 4672, E-mail: [email protected]
Web: www.malem.co.uk Web: www.malemmedical.co.uk
Malem Medical Ltd
10 Willow Holt
Lowdham
Nottingham
NG14 7EJ
England, UK
Tel: + 44 (0)115 966 4440
Fax: + 44 (0)115 966 4672
E-mail: [email protected]
Web: www.malem.co.uk
Web: www.malemmedical.com
© Malem Medical 2014
Malem Medical Ltd reserves the right to
change the specifications without prior
notice.
MO21/007/14
Malem
™
Ultimate
Vibro-Watch + Operation Manual
Model
MO21
11. Change Alarm time
• Press ‘M’ key twice to enter the Alarm
Setting Mode. Wait for 5 seconds while
loading.
• “ALARM SET” appears on the matrix zone.
• Previous set alarm will display
• Pre-selected alarm number, time and
animation wording are displayed (If active)
• Toggle ‘S’ key to desired alarm number
(1-2-3-4-5-6-7-8-9-10-11-12)
• Press and hold ‘S’ key for 3 seconds until
the Minute digits flash
• Press ‘C’ key to adjust alarm time in
minutes
• Press ‘S’ key to fix the Minute setting, then
Hour digits will flash
• Press ‘C’ key to adjust alarm time in hours
• Press ‘S’ key to fix hour setting.
• Press ‘M’ key back to Real Time display
12. Change Auto Repeat
Alarm time:
• Press ‘M’ key twice to enter Alarm Setting
Mode (wait for 5 seconds while loading)
• Word “ALARM SET” rolling on matrix zone
• Pre-selected alarm number, time and
animation word are displayed. (If active)
• Toggle ‘S’ key until to icon appears.
(After alarm 12)
• Press and hold S key for 3 seconds until
Minute digit flashes
• Press ‘C’ key to select desired count-down
time in minutes
• Press ‘S’ key to confirm setting and the
Hour digits flash
• Press ‘C’ key to select desired count-down
time in hours
• Press ‘S’ key to confirm setting
• Word “START” shown on matrix zone,
Minute digits flash (Useful to define
part of day you need the periodic auto-
repeat alarm to be active day or night)
• Press ‘C’ key to select desired start
activation time in minutes
• Press ‘S’ key to confirm setting and the
Hour digits flash
• Press ‘C’ key to select desired start
activation time in hours
• Press ‘S’ key to confirm setting
• Word “END” appears on matrix zone, and
the Minute digits flash
• Press ‘C’ key to select the desired count-
down time end in minutes
• Press ‘S key to confirm setting and the
Hour digits flash
• Press ‘C’ key to select desired count-down
time end in hours
• Press ‘S’ key to confirm setting
• Press ‘M’ key back to Real Time display
13. Change Animation Words
Specific time alarm:
• Press ‘M’ key twice to enter the Alarm
Setting Mode. Wait for 5 seconds while
loading.
• “ALARM SET” appears on the matrix zone.
• Previous set alarm will display
• Pre-selected alarm number, time and
animation wording are displayed (If active)
• Toggle ‘S’ key to desired alarm number
(1-2-3-4-5-6-7-8-9-10-11-12)
• Press and hold ‘S’ key for 3 seconds until
the Minute digits flash
• Press ‘S’ key to skip setting and the
Hour digits flash
• Press ‘S’ key to skip Hour setting
• Animation Words appears on matrix zone
Toggle ‘C’ key to select an appropriate word
from the following.
‘Hello, Wake Up, Toilet 1, Toilet 2,
Wash, Dress, Eat, Drink, Medicine,
Exercise, Appointment, Visitor and Bed
Time.’
• Press ‘S’ key to confirm selection
• Press ‘M’ key back to Real Time display
14. Change Animation Words
Auto Repeat Timer:
• Press ‘M’ key twice to enter the Alarm
Setting Mode. Wait for 5 seconds while
loading.
• “ALARM SET” appears on the matrix zone.
• Previous set alarm will display
• Pre-selected alarm number, time and
animation wording are displayed (If active)
• Toggle ‘S’ key to skip alarm number
(1-2-3-4-5-6-7-8-9-10-11-12) until the
icon for Auto-Repeat Timer Alarm
appears
• Press and hold ‘S’ key for 3 seconds until
the Minutes digit flash
• Press ‘S’ key to skip setting and Hour digits
flash
• Press ‘S’ key to skip Hour setting
• Press ‘S’ key 4 times to skip start time and
end time
• Animation Words appears on matrix zone
Toggle ‘C’ key to select an appropriate word
from the following: ‘Hello, Wake Up,
Toilet 1, Toilet 2, Wash, Dress, Eat,
Drink, Medicine, Exercise, Appointment,
Visitor and Bed Time.’
• Press ‘S’ key to confirm selection
• Press ‘M’ key back to Real Time display
15. Battery Replacement:
It is recommended that you use a watch repair
shop to prevent damage to the watch. Battery:
CR2032 (battery life is about 3 months when
new. Depends on use). When the old battery is
removed no programmed data will be lost on
the watch, but you will have to adjust the time
again once a new battery is in place.
1. To remove the old battery (use appropriate
coin fit the slot) twist battery cover 3
degrees anti-clockwise (see arrows by
the right hand side of the battery cover).
Ease/loosen cover.
2. Make sure you do not lose the ‘O’ ring
inside the rim.
3. Pull metal contact strip in base of the watch
slightly upwards (see drawing) to ensure
good battery contact with metal connectors
4. Press all four buttons at the same time for 2
seconds
5. Place new battery in the battery cover with
the correct polarity (See diagram)
6. Line up arrow on battery cover with open
arrow on back. Make sure ‘O’ ring is
correctly in place to prevent water/moisture
ingress.
7. Insert in battery compartment making sure
that contact is made once and not
repeatedly as this may blank or corrupt the
display and prevent the watch from
working. Watch will vibrate for a second
when battery makes contact.
8. Turn cover clockwise (using the coin) to
the closed position. Arrow lines up with the
wording ‘close’
9. If watch display is blank or corrupted, start
at step 1.
For
Professional
Use Only
Model
MO22
Battery Door
Opener
and
Battery Holder
1 2
3
4 5 6
7 8
9
1
0
1
1
12
LCD Display
Month/Hour
Date/Minute
Day/Second
12-Alarms
Repeat
Timer
Lock
Battery Door
Opener
CR-1632
Lithium
Battery
Compartment
Label
LITHIUM
BATTERY
CR-1632
Battery
Compartment
Label
+
Serial Number
Electroluminescence
Front View
VIBRO-WATCH
©
Back View
Model MO22
MALEM
TM
CR-1632
▼
●
●
Sound
Vibration
Lift metal tab slightly
when replacing battery
Open/Close
Indicator
MALEM
TM
Alarm Format
To avoid damage use
a watch repair shop
‘O’Ring
(Do not lose)
16. Please note:
The Malem Ultimate Vibro-Watch© is not water
proof due to the speaker holes on the front of
the watch.
17. Guarantee:
The Malem Ultimate Vibro-Watch© guarantee
covers manufacturing defects for one year from
date of purchase. It does not cover battery,
glass, strap, discolouration or damage caused
by wear and tear, water, abuse or misuse.
18. Disclaimer:
Please note the Malem Ultimate Vibro-Watch©
is designed as a helpful vibration/message
reminder. It is not intended to replace human
care or supervision and the manufacturer,
Malem Medical Ltd, is not responsible for
any consequences resulting from watch use,
misuse or failure.
19. Copyright:
Malem™ and Ultimate Vibro-Watch©+ MO21
are Trade Mark and copyright protected ©
2014. Malem Medical Ltd reserves the right to
change the specifications without prior notice.
1 - 3 - 5 - 7 - 9 - 11 -
AM
PM
CR2032
+
-
CLOSE
OPEN
OPEN
CLOSE
OPEN
BATTERY
CR2032
Observe the
correct polarity
MODEL
MO21
MODEL
MO21
C
L
O
S
E
O
D
E
E
E
E
L
L
O
2
2
1
1
CR2032
+
-
OPEN
1 - 3 - 5 - 7 - 9 - 11 -
AM
PM
CR2032
+
-
CLOSE
OPEN
OPEN
CLOSE
OPEN
BATTERY
CR2032
Observe the
correct polarity
MODEL
MO21
MODEL
MO21
C
L
O
S
E
O
D
E
E
E
E
L
L
O
2
2
1
1
1
CR2032
+
-
OPEN
Metal
Contact
Strip
For
Professional
Use Only
Model
MO22
Battery Door
Opener
and
Battery Holder
1 2
3
4 5 6
7 8
9
1
0
1
1
12
LCD Display
Month/Hour
Date/Minute
Day/Second
12-Alarms
Repeat
Timer
Lock
Battery Door
Opener
CR-1632
Lithium
Battery
Compartment
Label
LITHIUM
BATTERY
CR-1632
Battery
Compartment
Label
+
Serial Number
Electroluminescence
Front View
VIBRO-WATCH
©
Back View
Model MO22
MALEM
TM
CR-1632
▼
●
●
Sound
Vibration
Lift metal tab slightly
when replacing battery
Open/Close
Indicator
MALEM
TM
Alarm Format
To avoid damage use
a watch repair shop
‘O’Ring
(Do not lose)
To avoid damage to the battery
cover slot, please use appropriately
sized coin
Malem
™
Ultimate
Vibro-Watch + Record Message + Word Display + Weekly Programme + Memory - Operation Manual
Malem™ Ultimate Vibro-Watch©+
Instructions - Model MO21
Important: Please read before use
1. The Display:
The Speaker icon is visible during
alarm setting and in normal
time when any of the 12 Specific Time
Alarms or Repeat Timer is set, selected, had
a message recorded and activated.
The Vibrating icon is visible during
alarm setting and during normal time
when any of the 12 alarms or repeat
timer is set, selected and activated.
The Periodic Auto-Repeat Alarm Timer icon
is visible during setting or during
normal time when repeat timer is
selected and activated.
2. Key Assignments:
‘C’ - Change key: adjust settings. Only
active during setting.
‘S’ - Set key: Press to manually toggle through
the ‘Date’, ‘Day’ and ‘Year’ on the display.
Press and hold for 3 seconds to activate
and change the settings.
‘M’ - Mode select key: Press once for
Stopwatch then again for Alarm setting.
‘’- Playback key: Press once to replay the
last announced message. To record a new
message read section 11.
3. Time and Date:
To change or adjust the time and date settings
• Press and hold ‘S’ for 3 seconds until the
Second digits flash
• Press ‘C’ key to zero seconds
• Press ‘S’ key and the Minute digits flash
• Press ‘C’ key to adjust minute setting
• Press ‘S’ key to fix the Minute setting. Then
the Hour digits will flash
• Toggle ‘M’ key to select 12/24 hours
(Military) format
• Press ‘C’ key to adjust Hour setting
• Press ‘S’ key to fix the Hour setting, then
Year digits will flash
• Press ‘C’ key to adjust Year setting
• Press ‘S’ key to confirm Year setting, then
Month digits will flash
• Press ‘C’ key to adjust Month setting
• Press ‘S’ key to confirm Month setting, then
Date digits will flash
• Press ‘C’ key to adjust Date setting
• Press ‘S’ key to confirm
Display will show correct time and toggle
through year/month/date/day
4. Stopwatch:
To use the stopwatch
• Press ‘M’ once
• Stop Watch is displayed
• Press ‘S’ key to start
• Press ‘S’ key to stop
• Press ‘C’ key to zero
To use the stopwatch for lap times
• Press ‘M’ once
• Stop Watch is displayed
• Press ‘S’ key to start
• Press ‘C’ to read the lap time
• Press ‘C’ key again to continue
• Press ‘S’ key to stop
• Press ‘C’ key to zero
5. Specific Time Alarms:
To set 1 or more of the 12 alarms
• Press ‘M’ key twice to enter the Alarm
Setting Mode. Wait for 5 seconds while
loading.
• “ALARM SET” appears on the matrix zone.
• Previous set alarm will display
• Pre-selected alarm number, time and
animation wording are displayed (If active)
• Toggle ‘S’ key to desired alarm number
(1-2-3-4-5-6-7-8-9-10-11-12)
• Press and hold ‘S’ key for 3 seconds until
the Minute digits flash
• Press ‘C’ key to adjust minute setting
• Press ‘S’ key to fix the Minute setting, then
Hour digits will flash
• Press ‘C’ key to adjust Hour setting
• Press ‘S’ key to fix Hour setting.
• Animation Word rolls on the matrix zone
• Toggle ‘C’ key to select an appropriate word
from the following: ‘Hello, Wake Up,
Toilet 1, Toilet 2, Wash, Dress, Eat,
Drink, Medicine, Exercise,
Appointment, Visitor and Bed Time.’
• Press ‘S’ key to confirm word selection
• Theword “Daily” is displayed, this means the
alarm is activated daily
• Press ‘S’ key to confirm or press ‘C’ key to
select individual days
5a If ‘S’ key is pressed
• Press ‘C’ key to select (Vibration , Both
Vibration & Message or OFF)
5b If vibration and message are selected you
can record a message
• Press and hold ‘’ key for 3 seconds until
icon flashes, but do not release key
• While holding ‘’ key, bring the watch to
your mouth and speak clearly to record
your message. Recording time is 8 seconds
• Release ‘’ key when recording is completed
• Press ‘’ key once to listen to the recoreded
message. (Repeat recording if not clear)
• Press ‘S’ key to confirm selection. The next
alarm will be displayed.
• Repeat the above procedure for another
alarm or press ‘M’ key back to Real
Time display
5c If ‘C’ key is pressed
• The word “MON” will appear. To set the alarm
for Monday toggle the ‘S’ key to turn the
alarm ON or OFF.
• Toggle the ‘C’ key for“TUE”, “WED”, “THU”,
“FRI”, “SAT” and “SUN”. Repeat as above to
turn the alarm ON or OFF. After SUN press the
‘C’ key to select Vibration , Both Vibration
& Message or OFF.
• If both Vibration and Message are selected
record message as in section 5b
• Repeat the above procedure for another
alarm or press ‘M’ key back to Real
Time display
6. Periodic Auto-Repeat Alarm
(Repeat Count-down Timer):
• Press ‘M’ key twice to enter Alarm Setting
Mode (wait for 5 seconds while loading)
• Word “ALARM SET” appears on matrix zone
• Pre-selected alarm number, time and
animation word are displayed. (If active)
• Toggle ‘S’ key until to icon appears.
(After alarm 12)
• Press and hold S key for 3 seconds until
Minute digit flashes
• Press ‘C’ key to select desired count-down
time in minutes
• Press ‘S’ key to confirm setting and the Hour
digits flash
• Press ‘C’ key to select desired count-down
time in hours
• Press ‘S’ key to confirm setting
• Word “START” shown on matrix zone,
Minute digit flashes (Useful to define
part of day you need the periodic auto-repeat
alarm to be active day, night or throughout)
• Press ‘C’ key to select desired start activation
time in minutes
• Press ‘S’ key to confirm setting and the
Hour digits flash
• Press ‘C’ key to select desired start activation
time in hours
• Press ‘S’ key to confirm setting
• Word “END” appears on matrix zone, and the
Minute digits flash
• Press ‘C’ key to select the desired count-
down time end in minutes
• Press ‘S key to confirm setting and the
Hour digits flash
• Press ‘C’ key to select desired count-down
time end in hours
• Press ‘S’ key to confirm setting
• Animation Words appears on matrix zone
Toggle ‘C’ key to select an appropriate word
from the following:
‘Hello, Wake Up, Toilet 1, Toilet 2, Wash,
Dress, Eat, Drink, Medicine, Exercise,
Appointment, Visitor and Bed Time.’
• Press ‘S’ key to confirm selection
• Word “Daily” appeared means this alarm
will activating daily
• Press ‘S’ key to confirm or press ‘C’ key to
select individual days.
Proceed as in 5a, 5b and 5c
7. De-activation of the
activated Alarm:
• Press ‘M’ key twice to enter Alarm Setting
Mode (Wait for 5 seconds to load)
• Word “ALARM SET” appears on the matrix
zone
• Pre-selected alarm number, time and
animation word are displayed. (If active)
• Toggle ‘S’ key to desired active alarm number
(1-2-3-4-5-6-7-8-9-10-11-12) or icon for
Auto-Repeat Alarm
• Press ‘C’ key to de-select the active alarm,
the word OFF will be displayed and both
icons will disappear
• The alarm is de-activated but the settings
would not be lost, so that the alarm
can be activated again
• Press ‘M’ key back to Real Time display
8. Activation of the
de-activated Alarm:
• Press ‘M’ key twice to enter Alarm Setting
Mode (Wait for 5 seconds to load)
• Word “ALARM SET” appears on the matrix
zone
• Pre-selected alarm number, time and
animation word are displayed. (If active)
• Toggle ‘S’ key to desired inactive alarm
number (1-2-3-4-5-6-7-8-9-10-11-12)
or icon for Auto-Repeat Alarm
• Press ‘C’ key to activate the OFF alarm,
the word VIB appears with the icon. Press
‘C’ key again and the BOTH will appear with
the icon (Vibration & Message)
• The alarm is now activated
• Press ‘M’ key back to Real Time display
9. Activation/De-activation of
the Week-day alarm setting:
• Press ‘M’ key twice to enter Alarm Setting
Mode (Wait for 5 seconds to load)
• Word “ALARM SET” appears on the matrix
zone
• Pre-selected alarm number, time and
animation word are displayed. (If active)
• Toggle ‘S’ key to desired alarm number
(1-2-3-4-5-6-7-8-9-10-11-12) or icon for
Auto-Repeat Alarm
• Press ‘C’ key and hold for 3 second
• The Word “Daily” appears
• Press ‘C’ key to change
Proceed as in 5c
10. Record new Message:
• Press ‘M’ key twice to enter Alarm Setting
Mode (Wait for 5 seconds to load)
• Word “ALARM SET” appears on the matrix
zone
• Pre-selected alarm number, time and
animation word are displayed. (If active)
• Toggle ‘S’ key to desired alarm number
(1-2-3-4-5-6-7-8-9-10-11-12) or icon for
Auto-Repeat Alarm
• Press and hold ‘’ key for 3 seconds until
icon flashes, but do not release key
• While holding ‘’ key, bring the watch to
your mouth and speak clearly to record
your message. Recording time is 8
seconds
• Release ‘’ key when recording is completed
• Press ‘’ key once to listen to the recorded
message. (Repeat recording if not clear)
• Press ‘S’ key to confirm selection. The next
alarm will be displayed.
• Repeat the above procedure for another
alarm or press ‘M’ key back to Real
Time display
For
Professional
Use Only
Model
MO22
Battery Door
Opener
and
Battery Holder
1 2
3
4 5 6
7 8
9
1
0
1
1
12
LCD Display
Month/Hour
Date/Minute
Day/Second
12-Alarms
Repeat
Timer
Lock
Battery Door
Opener
CR-1632
Lithium
Battery
Compartment
Label
LITHIUM
BATTERY
CR-1632
Battery
Compartment
Label
+
Serial Number
Electroluminescence
Front View
VIBRO-WATCH
©
Back View
Model MO22
MALEM
TM
CR-1632
▼
●
●
Sound
Vibration
Lift metal tab slightly
when replacing battery
Open/Close
Indicator
MALEM
TM
Alarm Format
To avoid damage use
a watch repair shop
‘O’Ring
(Do not lose)
For
Professional
Use Only
Model
MO22
Battery Door
Opener
and
Battery Holder
1 2
3
4 5 6
7 8
9
1
0
1
1
12
LCD Display
Month/Hour
Date/Minute
Day/Second
12-Alarms
Repeat
Timer
Lock
Battery Door
Opener
CR-1632
Lithium
Battery
Compartment
Label
LITHIUM
BATTERY
CR-1632
Battery
Compartment
Label
+
Serial Number
Electroluminescence
Front View
VIBRO-WATCH
©
Back View
Model MO22
MALEM
TM
CR-1632
▼
●
●
Sound
Vibration
Lift metal tab slightly
when replacing battery
Open/Close
Indicator
MALEM
TM
Alarm Format
To avoid damage use
a watch repair shop
‘O’Ring
(Do not lose)
For
Professional
Use Only
Model
MO22
Battery Door
Opener
and
Battery Holder
1 2
3
4 5 6
7 8
9
1
0
1
1
12
LCD Display
Month/Hour
Date/Minute
Day/Second
12-Alarms
Repeat
Timer
Lock
Battery Door
Opener
CR-1632
Lithium
Battery
Compartment
Label
LITHIUM
BATTERY
CR-1632
Battery
Compartment
Label
+
Serial Number
Electroluminescence
Front View
VIBRO-WATCH
©
Back View
Model MO22
MALEM
TM
CR-1632
▼
●
●
Sound
Vibration
Lift metal tab slightly
when replacing battery
Open/Close
Indicator
MALEM
TM
Alarm Format
To avoid damage use
a watch repair shop
‘O’Ring
(Do not lose)
For
Professional
Use Only
Model
MO22
Battery Door
Opener
and
Battery Holder
1 2
3
4 5 6
7 8
9
1
0
1
1
12
LCD Display
Month/Hour
Date/Minute
Day/Second
12-Alarms
Repeat
Timer
Lock
Battery Door
Opener
CR-1632
Lithium
Battery
Compartment
Label
LITHIUM
BATTERY
CR-1632
Battery
Compartment
Label
+
Serial Number
Electroluminescence
Front View
VIBRO-WATCH
©
Back View
Model MO22
MALEM
TM
CR-1632
▼
●
●
Sound
Vibration
Lift metal tab slightly
when replacing battery
Open/Close
Indicator
MALEM
TM
Alarm Format
To avoid damage use
a watch repair shop
‘O’Ring
(Do not lose)
AM/PM
Hours,
Mintues
and
Seconds
Matrix area Year, Date, Day and
Animation display
Repeat
Timer
Selected
Message
and
Vibration
Selected Alarm 1-12
For
Professional
Use Only
Model
MO22
Battery Door
Opener
and
Battery Holder
1 2
3
4 5 6
7 8
9
1
0
1
1
12
LCD Display
Month/Hour
Date/Minute
Day/Second
12-Alarms
Repeat
Timer
Lock
Battery Door
Opener
CR-1632
Lithium
Battery
Compartment
Label
LITHIUM
BATTERY
CR-1632
Battery
Compartment
Label
+
Serial Number
Electroluminescence
Front View
VIBRO-WATCH
©
Back View
Model MO22
MALEM
TM
CR-1632
▼
●
●
Sound
Vibration
Lift metal tab slightly
when replacing battery
Open/Close
Indicator
MALEM
TM
Alarm Format
To avoid damage use
a watch repair shop
‘O’Ring
(Do not lose)
For
Professional
Use Only
Model
MO22
Battery Door
Opener
and
Battery Holder
1 2
3
4 5 6
7 8
9
1
0
1
1
12
LCD Display
Month/Hour
Date/Minute
Day/Second
12-Alarms
Repeat
Timer
Lock
Battery Door
Opener
CR-1632
Lithium
Battery
Compartment
Label
LITHIUM
BATTERY
CR-1632
Battery
Compartment
Label
+
Serial Number
Electroluminescence
Front View
VIBRO-WATCH
©
Back View
Model MO22
MALEM
TM
CR-1632
▼
●
●
Sound
Vibration
Lift metal tab slightly
when replacing battery
Open/Close
Indicator
MALEM
TM
Alarm Format
To avoid damage use
a watch repair shop
‘O’Ring
(Do not lose)
For
Professional
Use Only
Model
MO22
Battery Door
Opener
and
Battery Holder
1 2
3
4 5 6
7 8
9
1
0
1
1
12
LCD Display
Month/Hour
Date/Minute
Day/Second
12-Alarms
Repeat
Timer
Lock
Battery Door
Opener
CR-1632
Lithium
Battery
Compartment
Label
LITHIUM
BATTERY
CR-1632
Battery
Compartment
Label
+
Serial Number
Electroluminescence
Front View
VIBRO-WATCH
©
Back View
Model MO22
MALEM
TM
CR-1632
▼
●
●
Sound
Vibration
Lift metal tab slightly
when replacing battery
Open/Close
Indicator
MALEM
TM
Alarm Format
To avoid damage use
a watch repair shop
‘O’Ring
(Do not lose)
C S
M
PL AYB AC K
C S
M
PL AYB AC K
For
Professional
Use Only
Model
MO22
Battery Door
Opener
and
Battery Holder
1 2
3
4 5 6
7 8
9
1
0
1
1
12
LCD Display
Month/Hour
Date/Minute
Day/Second
12-Alarms
Repeat
Timer
Lock
Battery Door
Opener
CR-1632
Lithium
Battery
Compartment
Label
LITHIUM
BATTERY
CR-1632
Battery
Compartment
Label
+
Serial Number
Electroluminescence
Front View
VIBRO-WATCH
©
Back View
Model MO22
MALEM
TM
CR-1632
▼
●
●
Sound
Vibration
Lift metal tab slightly
when replacing battery
Open/Close
Indicator
MALEM
TM
Alarm Format
To avoid damage use
a watch repair shop
‘O’Ring
(Do not lose)
For
Professional
Use Only
Model
MO22
Battery Door
Opener
and
Battery Holder
1 2
3
4 5 6
7 8
9
1
0
1
1
12
LCD Display
Month/Hour
Date/Minute
Day/Second
12-Alarms
Repeat
Timer
Lock
Battery Door
Opener
CR-1632
Lithium
Battery
Compartment
Label
LITHIUM
BATTERY
CR-1632
Battery
Compartment
Label
+
Serial Number
Electroluminescence
Front View
VIBRO-WATCH
©
Back View
Model MO22
MALEM
TM
CR-1632
▼
●
●
Sound
Vibration
Lift metal tab slightly
when replacing battery
Open/Close
Indicator
MALEM
TM
Alarm Format
To avoid damage use
a watch repair shop
‘O’Ring
(Do not lose)
For
Professional
Use Only
Model
MO22
Battery Door
Opener
and
Battery Holder
1 2
3
4 5 6
7 8
9
1
0
1
1
12
LCD Display
Month/Hour
Date/Minute
Day/Second
12-Alarms
Repeat
Timer
Lock
Battery Door
Opener
CR-1632
Lithium
Battery
Compartment
Label
LITHIUM
BATTERY
CR-1632
Battery
Compartment
Label
+
Serial Number
Electroluminescence
Front View
VIBRO-WATCH
©
Back View
Model MO22
MALEM
TM
CR-1632
▼
●
●
Sound
Vibration
Lift metal tab slightly
when replacing battery
Open/Close
Indicator
MALEM
TM
Alarm Format
To avoid damage use
a watch repair shop
‘O’Ring
(Do not lose)
For
Professional
Use Only
Model
MO22
Battery Door
Opener
and
Battery Holder
1 2
3
4 5 6
7 8
9
1
0
1
1
12
LCD Display
Month/Hour
Date/Minute
Day/Second
12-Alarms
Repeat
Timer
Lock
Battery Door
Opener
CR-1632
Lithium
Battery
Compartment
Label
LITHIUM
BATTERY
CR-1632
Battery
Compartment
Label
+
Serial Number
Electroluminescence
Front View
VIBRO-WATCH
©
Back View
Model MO22
MALEM
TM
CR-1632
▼
●
●
Sound
Vibration
Lift metal tab slightly
when replacing battery
Open/Close
Indicator
MALEM
TM
Alarm Format
To avoid damage use
a watch repair shop
‘O’Ring
(Do not lose)
For
Professional
Use Only
Model
MO22
Battery Door
Opener
and
Battery Holder
1 2
3
4 5 6
7 8
9
1
0
1
1
12
LCD Display
Month/Hour
Date/Minute
Day/Second
12-Alarms
Repeat
Timer
Lock
Battery Door
Opener
CR-1632
Lithium
Battery
Compartment
Label
LITHIUM
BATTERY
CR-1632
Battery
Compartment
Label
+
Serial Number
Electroluminescence
Front View
VIBRO-WATCH
©
Back View
Model MO22
MALEM
TM
CR-1632
▼
●
●
Sound
Vibration
Lift metal tab slightly
when replacing battery
Open/Close
Indicator
MALEM
TM
Alarm Format
To avoid damage use
a watch repair shop
‘O’Ring
(Do not lose)
For
Professional
Use Only
Model
MO22
Battery Door
Opener
and
Battery Holder
1 2
3
4 5 6
7 8
9
1
0
1
1
12
LCD Display
Month/Hour
Date/Minute
Day/Second
12-Alarms
Repeat
Timer
Lock
Battery Door
Opener
CR-1632
Lithium
Battery
Compartment
Label
LITHIUM
BATTERY
CR-1632
Battery
Compartment
Label
+
Serial Number
Electroluminescence
Front View
VIBRO-WATCH
©
Back View
Model MO22
MALEM
TM
CR-1632
▼
●
●
Sound
Vibration
Lift metal tab slightly
when replacing battery
Open/Close
Indicator
MALEM
TM
Alarm Format
To avoid damage use
a watch repair shop
‘O’Ring
(Do not lose)
For
Professional
Use Only
Model
MO22
Battery Door
Opener
and
Battery Holder
1 2
3
4 5 6
7 8
9
1
0
1
1
12
LCD Display
Month/Hour
Date/Minute
Day/Second
12-Alarms
Repeat
Timer
Lock
Battery Door
Opener
CR-1632
Lithium
Battery
Compartment
Label
LITHIUM
BATTERY
CR-1632
Battery
Compartment
Label
+
Serial Number
Electroluminescence
Front View
VIBRO-WATCH
©
Back View
Model MO22
MALEM
TM
CR-1632
▼
●
●
Sound
Vibration
Lift metal tab slightly
when replacing battery
Open/Close
Indicator
MALEM
TM
Alarm Format
To avoid damage use
a watch repair shop
‘O’Ring
(Do not lose)
For
Professional
Use Only
Model
MO22
Battery Door
Opener
and
Battery Holder
1 2
3
4 5 6
7 8
9
1
0
1
1
12
LCD Display
Month/Hour
Date/Minute
Day/Second
12-Alarms
Repeat
Timer
Lock
Battery Door
Opener
CR-1632
Lithium
Battery
Compartment
Label
LITHIUM
BATTERY
CR-1632
Battery
Compartment
Label
+
Serial Number
Electroluminescence
Front View
VIBRO-WATCH
©
Back View
Model MO22
MALEM
TM
CR-1632
▼
●
●
Sound
Vibration
Lift metal tab slightly
when replacing battery
Open/Close
Indicator
MALEM
TM
Alarm Format
To avoid damage use
a watch repair shop
‘O’Ring
(Do not lose)
For
Professional
Use Only
Model
MO22
Battery Door
Opener
and
Battery Holder
1 2
3
4 5 6
7 8
9
1
0
1
1
12
LCD Display
Month/Hour
Date/Minute
Day/Second
12-Alarms
Repeat
Timer
Lock
Battery Door
Opener
CR-1632
Lithium
Battery
Compartment
Label
LITHIUM
BATTERY
CR-1632
Battery
Compartment
Label
+
Serial Number
Electroluminescence
Front View
VIBRO-WATCH
©
Back View
Model MO22
MALEM
TM
CR-1632
▼
●
●
Sound
Vibration
Lift metal tab slightly
when replacing battery
Open/Close
Indicator
MALEM
TM
Alarm Format
To avoid damage use
a watch repair shop
‘O’Ring
(Do not lose)
For
Professional
Use Only
Model
MO22
Battery Door
Opener
and
Battery Holder
1 2
3
4 5 6
7 8
9
1
0
1
1
12
LCD Display
Month/Hour
Date/Minute
Day/Second
12-Alarms
Repeat
Timer
Lock
Battery Door
Opener
CR-1632
Lithium
Battery
Compartment
Label
LITHIUM
BATTERY
CR-1632
Battery
Compartment
Label
+
Serial Number
Electroluminescence
Front View
VIBRO-WATCH
©
Back View
Model MO22
MALEM
TM
CR-1632
▼
●
●
Sound
Vibration
Lift metal tab slightly
when replacing battery
Open/Close
Indicator
MALEM
TM
Alarm Format
To avoid damage use
a watch repair shop
‘O’Ring
(Do not lose)
For
Professional
Use Only
Model
MO22
Battery Door
Opener
and
Battery Holder
1 2
3
4 5 6
7 8
9
1
0
1
1
12
LCD Display
Month/Hour
Date/Minute
Day/Second
12-Alarms
Repeat
Timer
Lock
Battery Door
Opener
CR-1632
Lithium
Battery
Compartment
Label
LITHIUM
BATTERY
CR-1632
Battery
Compartment
Label
+
Serial Number
Electroluminescence
Front View
VIBRO-WATCH
©
Back View
Model MO22
MALEM
TM
CR-1632
▼
●
●
Sound
Vibration
Lift metal tab slightly
when replacing battery
Open/Close
Indicator
MALEM
TM
Alarm Format
To avoid damage use
a watch repair shop
‘O’Ring
(Do not lose)
For
Professional
Use Only
Model
MO22
Battery Door
Opener
and
Battery Holder
1 2
3
4 5 6
7 8
9
1
0
1
1
12
LCD Display
Month/Hour
Date/Minute
Day/Second
12-Alarms
Repeat
Timer
Lock
Battery Door
Opener
CR-1632
Lithium
Battery
Compartment
Label
LITHIUM
BATTERY
CR-1632
Battery
Compartment
Label
+
Serial Number
Electroluminescence
Front View
VIBRO-WATCH
©
Back View
Model MO22
MALEM
TM
CR-1632
▼
●
●
Sound
Vibration
Lift metal tab slightly
when replacing battery
Open/Close
Indicator
MALEM
TM
Alarm Format
To avoid damage use
a watch repair shop
‘O’Ring
(Do not lose)
For
Professional
Use Only
Model
MO22
Battery Door
Opener
and
Battery Holder
1 2
3
4 5 6
7 8
9
1
0
1
1
12
LCD Display
Month/Hour
Date/Minute
Day/Second
12-Alarms
Repeat
Timer
Lock
Battery Door
Opener
CR-1632
Lithium
Battery
Compartment
Label
LITHIUM
BATTERY
CR-1632
Battery
Compartment
Label
+
Serial Number
Electroluminescence
Front View
VIBRO-WATCH
©
Back View
Model MO22
MALEM
TM
CR-1632
▼
●
●
Sound
Vibration
Lift metal tab slightly
when replacing battery
Open/Close
Indicator
MALEM
TM
Alarm Format
To avoid damage use
a watch repair shop
‘O’Ring
(Do not lose)
Speaker
Holes
  • Page 1 1
  • Page 2 2

Malem Ultimate Vibro-Watch + Operating instructions

Brand
Malem
Model
Ultimate Vibro-Watch +
Category
Watches
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents