Magnavox 20MC4306/37B User manual

Type
User manual

This manual is also suitable for

ANT.
AUDIO OUT
COAXIAL
IN
OUT
OR
3
CABLE BOX
CABLE TV SIGNAL
RF COAXIAL
CABLE
ANT.
4
ANT.
ANTENNA or
CABLE TV SIGNAL
2
1
Disconnect all equipment from the power outlets. Connect the equipment to the power outlets only after you
have finished hooking up everything. Never make or change connections with equipment connected to the power outlet.
2
If you do not have a Cable Box, simply connect your Antenna or Cable TV signal directly to the ANT(enna)
jack on the rear of the TV/VCR/DVD.
3
If you do have a Cable Box or Satellite Receiver, first connect the Cable TV or Satellite signal to the IN jack
on the Cable Box or Satellite Receiver. Then, use an RF coaxial cable (not supplied) to connect the OUT
jack of the Cable Box or Satellite Receiver to the ANT(enna) jack on the TV/VCR/DVD. To view any channel, set
the TV/VCR/DVD to the output channel of the Cable Box or Satellite Receiver (channel 3 or 4). Then, select channels at the
Cable Box or Satellite Receiver.
4
When all connections are complete, plug the power cord of the TV/VCR/DVD into an active power
outlet.
5
Press STANDBY-ONy on the TV/VCR/DVD or its remote to turn on the unit.
24MC4306
20MC4306
There are many ways to connect your new TV/VCR/DVD to your other equipment. This Quick Start Guide
shows the easiest, most common connections for the TV/VCR/DVD.
Printed in Malaysia
8239 300 47261
1EMN21555
T2221UB/T1201UB*****
24MC4306 20MC4306
T2221_1201UB_QSG_EN 3/7/06 11:37 AM Page 1
123
456
STANDBY-ON
OPEN/CLOSE
MODE
SELECT
DISPLAY
CH. VOL.
MUTE
MENU
PICTURE
/SLEEP
Quick Start Guide (cont’d)
Quick Start Guide (cont’d)
Detailed playback features and additional functions are described in the
accompanying owner’s manual.
Watching TV
1
Press STANDBY-ONy to turn on the TV/VCR/DVD. The red VCR/TV light
will appear.
2
This unit memorizes TV channels when you connect an Antenna or Cable TV signal
as described in this Quick Start Guide.
To watch TV, use CH. /to select memorized channels. If a channel is skipped,
use the Number buttons to select it.To update your channels later, refer to the
owner’s manual.
3
Press VOL.
X
/
Y
to adjust the volume.
Playing a Videotape
1
With the unit on, press SELECT to put the unit in TV/VCR mode. The red
VCR/TV light will appear.
2
Insert a videotape in the cassette compartment. If play does not start
automatically, press PLAY B.
3
Press STOP C to stop play.
Playing a DVD
1
With the unit on, press SELECT repeatedly to put the TV/VCR/DVD in
DVD mode. The green DVD light will appear on the front of the TV/VCR/DVD.
2
Press OPEN/CLOSE A to open the disc tray.
3
Place a disc into the tray, with the label facing up and the shiny side facing
down.
Playable Discs
The TV/VCR/DVD will play the following discs.
Windows Media is a trademark of Microsoft Corporation.
DVDs must have a Region Code of ALL regions or Region 1.
DVDs must be recorded in the NTSC Color System.
1
ALL
VOLUME 20
PLAY
HG
STOP
RETURN
MODE
SELECT
DISPLAY
CH. VOL.
MUTE
DISC SET-UP
MENU
SLOW PAUSE
TITLE
ENTER
PICTURE
/SLEEP
1
2
3
2
1
3
4
Press PLAY B. The tray will close and playback will begin. If playback does
not start automatically, press PLAY B again.
If a DVD menu appears instead, use KLs B, ENTER or Number buttons to
choose features or start playing from the menu.
5
Press STOP C to stop play.
is a trademark of DVD Format/Logo Licensing Corporation.
123
456
7
8
9
0
+10
+100
CLEAR
REC MODE REC
PLAY
HG
STOP
RETURN
MODE
SELECT
DISPLAY
CH. VOL.
MUTE
DISC SET-UP
MENU
SLOW PAUSE
TITLE
STANDBY-ON
OPEN/CLOSE
ENTER
PICTURE
/SLEEP
4
2
1
5
T2221_1201UB_QSG_EN 3/7/06 11:37 AM Page 2
  • Page 1 1
  • Page 2 2

Magnavox 20MC4306/37B User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI