ENERGY SISTEM Xsound 5000 User manual

Brand
ENERGY SISTEM
Model
Xsound 5000
Type
User manual
Page 1 of 7
INTRODUCTION
Energy Sistem thanks you for buying Speakers Bluetooth Xsounnd™ 5000. We wish
you enjoy using it.
Listen the spectacular sound from your cell mobile, MP3 or MP4 in the powerful
Xsounnd™ 5000. Use audio in line or the new wireless technology Bluetooth stereo
A2DP. Design, sound quality, and technology joined in just one device.
We recommend to read this user manual in order to enjoy the product in a safe way and
with the best features.
CARE AND MAINTENANCE
- Do not use abrasive or corrosive cleansers.
- Keep the device clean and without dust with a soft and dry cloth.
- Use the power cable of your Xsounnd™ 5000 only for connect the device.
- Do not disassemble the device. Any repair work must be performed by qualified
Energy Sistem Soyntec’s personnel.
- Do not expose the speaker to liquid, moisture or humidity, as it is not
waterproof.
- Do not use the speaker outdoors when it is raining.
- Do not use abrasive cleaners to clean the speaker as they maydamage the finish.
- Always unplug the power cable first beforperforming any general cleaning.
- Do not expose the speaker to extremely high or low temperatures.
CAUTION: To reduce the risk of electric
shock, do not remove the cover or back.
Refer servicing to qualified service
personnel.
The lightning flash with arrowhead symbol
within an equilateral triangle is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operati and
maintenance (servicing) instructions in the
literature accompanying the appliance.
The appangratus should not be exposed to
dripping or splashing area. No objects filled
with liquids, such as vases, should be placed
on the apparatus.
Page 2 of 7
CARE AND MAINTENANCE
- Keep the speaker away from direct sunlight.
- Do not attempt to disassemble the speaker, as it does not contain serviceable
components.
- Please store the speaker in a dry place that is free from extreme temperatures and
dust.
- The power function of the unit may malfunction when there is radio signal
interference on the power lines. The speaker will revert to normal operation
when the interference stops.
- When you store the speaker away, please do not put any heavy objects on top
of it.
CARE AND MAINTENANCE
- Never try to plug or unplug the mains adapter when your hands are wet, you
may suffer from electric shock.
- Always remove the power cable first before moving the speake around to
prevent tripping over the speaker cord.
- Never try to pull the power cord to unplug the speaker you should hold the
power cable plug and pull.
- Never let children play with the power cord.
- Never allow children to play with the speaker as it contains small parts that
may be of choking hazard.
- Observe all signs and displays that require an electrical device or RF radio
products to be switched off in designated areas. These could include hospitals,
blasting areas, and potentially explosive atmospheres.
- Turn off the speaker and other Bluetooth devices prior to boarding and aircraft.
- Do not use the speaker inside the aircraft.
- Always place the speaker on a flat and level surface for operation.
- Do not attempt to modify the speaker for other purpose.
- In case batteries leak, handle the batteries with care as they could cause
chemical burn.
- Dispose of the packaging and the speaker in accordance with the local
regulations.
Page 3 of 7
MAIN FEATURES
- Volume control
- Bluethooth: Version 1.2 Class 2
- Output power: 7 W x 2
- Active subwoofer: 21 W
- Frequency response: 45 HZ - 20 KHz
- Bluetooth protocol : A2DP
- Power supplied: AC 110/220 V
- Maximum energy consumption: 50 W
- Audio input 3.5 mm Jack
- Wood soundbox
- Operating range: 10 m
- Dimensions: 380 x 160 x 180 mm
- Weight: 4.8 Kg
PRODUCT CONTENT
- Energy Sistem® Speakers Bluetooth Xsounnd™ 5000
- Power cable included in the product.
- User’s Manual.
GENERAL OVERVIEW
1. Volume –
2. Volume +
3. Status indicator
4. Status indicator
5. Audio In (3.5mm Jack)
6. Power socket
7. ON/OFF button
8. Current AC selector
Page 4 of 7
STARTING
To use your Xsounnd™ 5000, please follow these simple steps:
- Power your Music Fan using power cable
- The power cable is included in the package.
- The power socket for the power cable is located on the back of the speaker.
- Connect the mains adaptor to an AC wall outlet .
NOTE:
- Use the AC outlet to power the speaker ONLY.
- The charge function of the speaker system may cause occasional radio
interference. It will return/get back to normal operation when the interference
stops.
TURN ON AND OFF
1) Turn On
Turn On the POWER button to switch on the device.
Each time when you turn on the speaker by pressing the power
button, it will automatically to pairing. If there is no Bluetooth device be
paired with the speaker, the Bluetooth function will turn off automatically.
2) Turn Off
Turn Off the POWER button to switch off the device.
To disconnect the Bluetooth connection, simply turn off the speaker.
PAIR WITH BLUETOOTH DEVICES
Prior to using your Xsounnd™ 5000 for the first time, you must pair it with a Bluetooth
enabled music cell phone or an A2DP ready portable player.
If you are already get a Bluetooth dongle that compliant with the player, you can pair it
with this speaker to enjoy music on players without a headset.
The information below describes the pairing procedure for the speaker with a typical
Bluetooth enabled music cell phone and portable player. However, the pairing
procedure may vary with different models of cell phones or portable players. Please
refer to the user's guide provided by the respective manufacturer for pairing details.
Page 5 of 7
PAIR WITH BLUETOOTH DEVICES
Pair with a Bluetooth device:
- Place your Music Fan where is no more than one meter from the cell phone and
make sure there are no other Bluetooth devices nearby.
- Before pairing, ensure that the speaker is turned.
- Press and hold the power button on the speaker until the blue and red light starts
to blink alternately. The speaker is now in pairing mode.
- Activate your cell phone's Bluetooth function to start pairing with the speaker.
Please refer to the cell phone's user's guide for pairing details.
- Set the cell phone to search for the Bluetooth devices within one meter, and
follow the instructions on the cell phone's screen. When prompted, select
Xsounnd 5000 from the list and input the pair code"0000".
- Once pairing is successfully completed, blue light on the speaker will turn on.
- Go back to your cell phone's main menu and select the MP3 player to play the
music.
If the pairing cannot be completed within 5 minutes, then the Bluetooth function of the
speaker will turn off automatically. Please repeat the 1 to 7 steps to pair the speaker
with A2DP devices again to reset it.
As showed in the above picture, there is a 3.5 mm socket on the back of Xsounnd™
5000. You can also choose a 3.5mm cable to connect your players with Xsounnd™
5000 if it is not convenient for you to find a Bluetooth adapter for them.
USING YOUR XSOUNND
TM
5000
Listen to the music from the Bluetooth device.
After your Music Fan has been paired with your cell phone successfully, you may enjoy
the music of the cell phone from any speaker. Press the Volume+/- on the speaker to
adjust the volume.
To stream stereo audio from your cell phone, please make sure they support the
Bluetooth A2DP profile.
Listen to Stereo Audio from a non- A2DP player
After you connecte the speaker with non-A2DP player with 3.5 MM cable, you can also
stream the audio from the player to Xsounnd™ 5000.
Page 6 of 7
TROUBLESHOOTING
If you are experiencing problems with the speaker system, please try the following:
- Check the connection of the power cable to ensure that it is securely plugged
into the speaker and the AC wall outlet.
- Before pairing, turn off the speaker system first and then turn it on again
according to the instructions.
- Check the status indicator to ensure the speaker system is turned on.
- Ensure the speaker is paired with your MP3 cell phone and portable player that
supports A2DP profile.
TROUBLESHOOTING
- Ensure your cell phone's or portable player's Bluetooth function is activated.
Please refer to user's guide for specific instructions
- Press the Volume + - to adjust the volume to a desired level.
- Ensure the speaker, or portable player is within the maximum of 10 meters of
your cell phone and player. There are no obstructions, Such as walls or other
electronic devices in between.
Technical support email address: [email protected]
SPECIAL GUARANTEE
Energy Sistem guarantees that your product does not have any material, design or
manufacture defect and provides 36 month guarantee.
Guarantee procedure
Direct to your vendor and present the purchase invoce or ticket. For more information
visit www.energysistem.com.
Specifications are subject to change without notice.
© 2007 by Energy Sistem. All rights reserved.
Trademarks
All company, brand and product names are trademarks or registered trademarks of their
respective companies.
Page 7 of 7
AGREEMENT DECLARATION
Supplier Name: Energy Sistem Soyntec S. A.
Address: Pol. Ind. Finestrat C/ Calpe esq. C/ Alicante S/N, 03509 Finestrat Alicante
Tel: 902 388 388
Fax: 902 119 034
NIF: A53107488
We declare under our own exclusive responsability the product agreement:
Energy Sistem® Speakers Bluetooth Xsounnd™ 5500
Manufacturing country: China
which concern this agreement, with the norm(s) or other(s) formative(s)
document(s).
In accord with the disposition of the Directive 93/68/CEE, from the European
Parlament and the Counsel from 22th July 1993, transposed to the spanidh
legislation through the Real Decree 1950/1995, from 1th December 1995.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

ENERGY SISTEM Xsound 5000 User manual

Brand
ENERGY SISTEM
Model
Xsound 5000
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents