2. Sharp
  3. PN-R706
PN-R706

Sharp PN-R706, PNR706 Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Sharp PN-R706 Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What tools are required to dismantle the Sharp PN-R706 LCD monitor?
    How do I remove the back covers of the Sharp PN-R706 LCD monitor?
    How do I remove the printed circuit boards (PCBs) from the Sharp PN-R706 LCD monitor?
    How do I remove the battery from the Sharp PN-R706 LCD monitor?
    How do I dismantle the LCD module of the Sharp PN-R706 LCD monitor?
    Where are the electrolyte capacitors located on the Sharp PN-R706 LCD monitor?
    How do I remove the electrolyte capacitors from the Sharp PN-R706 LCD monitor?
    What parts of the Sharp PN-R706 LCD monitor are listed in Annex VII of Directive 2012/19/EU?
PN-R706 Dismantle Instruction
1
Dismantle Instruction
LCD MONITOR
MODEL
PN- R706
PN-R706 Dismantle Instruction
2
Table of contents
1. Scope.................................................................................................................. 3
2. Tools for dismantling ............................................................................................... 3
3. Dismantle Procedure .............................................................................................. 3
4. Back covers .......................................................................................................... 4
5. Printed circuit boards ............................................................................................. 5
6. Battery ................................................................................................................ 5
7. LCD Module .......................................................................................................... 6
8. Capacitors ............................................................................................................ 7
9. Parts List ............................................................................................................. 7
PN-R706 Dismantle Instruction
3
1. Scope
This document describes dismantling instruction according to Annex VII of Directive 2012/19/EU.
2. Tools for dismantling
Below tools are required to dismantle this product.
- Screw Driver
- Nipper
3. Dismantle Procedure
This product can be dismantled by below steps.
1. Remove Back covers (section 4)
2. Remove the shielding
3. Remove Printed circuit boards (section 5)
4. Remove Battery (section 6)
5. Dismantle LCD (section 7)
6. Remove Electrolyte Capacitors (section 8)
PN-R706 Dismantle Instruction
4
4. Back covers
Back cover can be removed by screw driver.
PN-R706 Dismantle Instruction
5
5. Printed circuit boards
All PWBs can be removed by screw driver.
Main I/F PWB (1pcs) Power PWB (1pcs) LED driver PWB (1pcs)
T-CON PWB (1pcs) OPS PWB (1pcs)
6. Battery
This model uses AAA battery for remote control and CR2032 Lithium Coin battery on Main I/F PWB.
-The remote control battery can be easily removed.
-The battery CR2032 on the main I/F PWB can be easily removed from the battery holder.
PN-R706 Dismantle Instruction
6
7. LCD Module
- LCD Dismantle procedure
1. Remove Rear cover
2. Remove PWBs and Tray
3. Remove the Cables
LCD
PN-R706 Dismantle Instruction
7
8. Capacitors
Electrolyte Capacitors which diameter/height is larger than 25mm is installed on Power PWB.
These capacitors can be removed by using nipper to cut the leads.
On Power PWB
9. Parts List
Parts described in Annex VII of directive 2012/19/EU are as below.
Note
70inch LCD module
Main I/F PWB
Power PWB
LED driver PWB
T-CON PWB
OPS PWB
AAA battery
Lithium Coin Battery CR2032
On Power PWB
2 kinds of Power Cord
- for EU
- for UK
/