Condari Condor Baltimore Installation Instructions Manual

Condor Baltimore
Brand
Condari
Model
Condor Baltimore
Type
Installation Instructions Manual
INSTALLATION
INSTRUCTIONS
2
Condor Rangehood Installation Instructions
Boston Rangehood
3
Condor Rangehood Installation Instructions
Warranty
Important Information
Instructions for Models
BSF / BCM / C / BAL
Instructions for Models
DAR / FAL / ICU / CUB
Cleaning
Ducting Pieces
Guarantee & Exclusions
4
6
18
12
20
21
23
4
Condor Rangehood Installation Instructions
CONDARI PTY LTD makes over 120 different models of QASAIR and CONDOR Rangehoods plus many
specials designed by architects and interior designers.
It is important to follow the installation instructions for different models.
The following is general advice for the installation of CONDOR Rangehoods and is meant as a guide.
Firstly, there are many different cooking appliances on the market today and we list some here.
Electric Eco, Ceramic hotplates, Teppanyaki plates and Induction hotplates, which need special cooking
equipment. There are gas hotplates with four burners and a wok burner or sh burner of all different heat output.
Many companies offer a vario system with individual two gas burners, a wok burner, electric ceramic hotplate, an
electric griller or barbecue and an induction hotplate. There are three gas cooking appliances with an open ame
griller or barbecue.
Gas regulations require different heights for different brands of hoods. CONDOR hoods can be tted between
1000 mm to 1400 mm above the barbecue. This is due to the fact they do not have plastic motors.
1. The installation of CONDOR Rangehoods must comply with the information in this booklet. CONDOR
Rangehoods are designed and made to work efciently over all domestic cookware available on the
Australian market.
2. Every CONDOR Rangehood must be ducted to the outside atmosphere by the use of zinc-alume duct or
non-porous and non-ammable materials. We do not recommend the use of any type of exible ducting
or plastic PVC piping (barbecue heat output will affect exible ducting and cause it to desintegrate).
Rangehoods must not be vented into a wall cavity or a ceiling space. This prevents a build up of grease,
which can be a re risk. Ensure the external outlet vent does not restrict the airow in any way, as this may
result in reduced performance.
3. CONDOR Rangehoods must be ducted in duct work equivalent to the outlet of the rangehood
ie: The cross sectional area of the rangehood outlet and the duct work must be equal. Do not reduce the
duct size or have sharp bends. Enlarge the duct size if the duct is to run 6 metres or longer. Advice from
CONDOR is available to ensure optimum performance. Always use nonammable materials to minimise the
risk of re in the duct at a later date.
4. Ensure all ducting pieces are correctly tted and sealed with either duct tape or silicone to ensure that fumes
do not escape into the ceiling space and seep into living areas through vents or light ttings. The installation
and tting of the rangehood should be done in such a way that will allow the unit to be removed if service is
required. Additional costs incurred in the removal of wall tiles, damage to walls or bench tops are not covered
by warranty.
5. Always adequately ventilate the room when the rangehood is in use at the same time as appliances burning
gas or other fuels.
6. WARNING: Incorrect venting will result in additional noise and a reduction in efciency. Exhaust air must not
IMPORTANT INFORMATION
5
Condor Rangehood Installation Instructions
be discharged into any chimney or ue, which may carry combustible products from other sources.
a) Do not discharge the air-ow from the rangehood into a ue used for exhausting fumes
from burning gas or fuel;
b) A reduction in ducting size will result in the motors eventually failing and will need replacement.
c) For cleaning purposes please refer to page 20 of installation instructions for stainless steel;
d) If cleaning is not carried out in accordance with the instructions as listed on page 20, you
may have an increased risk of re;
e) Accessible parts of the rangehood may become hot when used with cooking appliances;
f) This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
7. If the supply cord is damaged, an authorised service centre or licensed electrician must replace it.
8. NOTE: CONDOR recommend minimum air movement of 2000 cubic metres per hour and recomment up to
2700 cubic metres per hour over a barbecue, depending on the length of the duct run. Barbecues should be
positioned under the centre of the hood where the fans are mounted and not near the outer edges where
leakage may occur. Please also note barbecue lid position, as if it does not open to a 90 degree angle the
smoke and by-products can be diverted forward and away from the rangehood catchemt area.
9. The lights in the rangehoods are LED.
10. To reduce the risk of xing screws coming in contact with live parts, do not drill or screw into the rangehood.
Live wires are encapsulated where possible to prevent user contact. If necessary drill from the inside out and
only through single sheet material.
11. CONDARI PTY LTD can manufacture rangehoods to be used over commercial cookers in domestic
applications.
NOTE: Installation must comply with local State & Council regulations.
6
Condor Rangehood Installation Instructions
INSTALLATION INSTRUCTIONS CONDOR RANGE
To suit wall mounted models:
• Balmoral
• Boston
• Cubica
• Baltimore
1. Determine hood position on wall 1000mm to 1400mm above barbecue.
2. Unpack Rangehood.
3. Mark centre line on wall.
4. Mark base line on wall (Note: if shroud being used, the height of the shroud will determine
the height of the hood).
5. Mark the outlet hole in the ceiling for the ue and cut out, removing any obstructions
allowing clear access for the ue (Note: if using rear duct, mark and cut hole at this time).
6. Remove the perforated rear panel in hood by removing bolts with a 7mm hex socket.
7. Drill xing holes in rear of hood to suit available xing points on wall making sure to get
xing as high and as wide as possible in Rangehood to avoid sagging from wall. (Please
refer to Rangehood diagram for example of possible xing points)
8. Remove plastic cover from rear mounting plate and x to wall at base height of hood
making sure this is level and exactly central.
9. Transfer xing locations from hood to wall and drill xing holes. Insert plugs to allow or use
Dyna bolts as an alternative.
10. Locate position for power cable and drill hole for cable using a hole saw. Consult your
electrician for his preferred location.
A
A
INSTALLATION INSTRUCTIONS
CONDOR WALL MOUNTED
Prior to installation it will be necessary to ensure there is adequate space above the
rangehood clear of structural beams for the ducting and that there are suitable
fixing points in the wall.
Rangehood weight 50-60 kg plus ducting.
Recommended installation height above BBQ is 1000mm - 1200mm.
Proceedure:-
1. Make wall or ceiling penetration for the ductin
g.
2. Locate the power cable in the wall and exit the cable through the wall in the
corresponding position of the power entry hole on the back of the rangehood.
3. The rear panel of the rangehood on the inside is covered with a soundproofing
panel (perforated). Remove the fixing bolts, 7mm hex socket required.
4. Fix through the galvanized back panel to wall with suitable fixing bolts.
5. Replac
e perforated panel.
6. Connect power to junction box.
7. Fit off ducting as required. Condari will make special duct pieces on request.
8. Do not reduce the duct size . Do not use flexible ducting.
Perforated
panels
7mm hex bolt head
Electrical
junction box
7
Condor Rangehood Installation Instructions
11. Fit stainless ue to top of hood with 4 supplied xing screws while hood is on ground to
avoid having to drop stainless ue down through hole in the ceiling and causing possible
damage to the ue. (If using shroud it can be tted either at this stage or carefully after
hood is on wall)
12. Remove fans if needed and lift hood up onto mounting bracket carefully guiding ue
through hole in ceiling and bringing power cable into hood during this process. You will
require up to 3 people for this lifting stage as hood is quite awkward and heavy to lift.
13. Screw or bolt hood to wall securely making sure hood is level and sitting properly on
mounting bracket. It is advisable to have portable stands ready for this stage as hood will
get quite heavy.
14. Ret perforated panel in the rear or the hood and ret fans if they have been removed.
15. Make electrical connection to junction box inside bottom right side of hood.
16. Extend ducting through roof to exterior and t roof cowl making sure to seal roof
penetration with preferred ashing material. (Note: there are several on the market to suit
the type of roof you have, so consult your plumber for the best product to suit)
8
Condor Rangehood Installation Instructions
LED Lights
Electrical connection is to be at the
junction box inside the rangehood.
All BSF rangehoods have 3 fans to
ensure all smoke from the barbecue
is removed from the alfresco area.
BSF
BALMORAL Specification Sheet
Top Ducted
Back Ducted
Wall Mounted
The flues available for BSF rangehoods
are model No DL-BC and come in lengths
of 600, 900, or 1200mm.
Model
Body Width "A" Lights Light Centres "
Filters Filter size
BSF 1000L-3 1000mm 2 436mm 6 290 x 290mm
BSF 1200L-3 1200mm
2
545mm 8 272 x 290mm
BSF 1500L-3 1500mm 3 459mm 6 459 x 290mm
800
450
100
4
5
0
4
0
0
2
0
0
X
M
i
n
i
m
u
m
2
5
m
m
.
1
0
0
9
3
1
9
5
Issue 01.08.2013
Model
Body Width Lights Light Centres
Filters Filter size
BSF 1000L-3 1000mm 2 436mm 6 290 x 290mm
BSF 1200L-3 1200mm
2
545mm 8 272 x 290mm
BSF 1500L-3
1500mm
3
459mm 6
459 x 290mm
Power
Entry.
19-10-2
0
1
2
Top Ducted
Top Ducted
B
o
d
y
W
i
d
t
h
8
0
0
445
600
4
5
0
2
5
0
B
o
d
y
W
i
d
t
h
L
i
g
h
t
C
e
n
t
r
e
s
8
0
0
500
BALMORAL (BSF)
The ues available for BSF rangehoods are
model No DL-BC BSF and come in lengths of
600, 900 or 1200mm.
9
Condor Rangehood Installation Instructions
LED Lights
Electrical connection is to be at the
junction box inside the rangehood.
All BCM rangehoods have 3 fans to
ensure all smoke from the barbecue
is removed from the alfresco area.
BCM
BOSTON Specification Sheet
Top Ducted
Back Ducted
Wall Mounted
The flues available for BCM rangehoods
are model No DL-BC and come in lengths
of 600, 900, or 1200mm.
Model
Body Width "A"
Fanbox Width "B"
No Lights Light Centres "C"
No Filters Filter size
BCM 1000L-3 1000mm 800mm 2 436mm 6 292 x 290mm
BCM 1200L-3 1200mm 1000mm
2
545mm 8 272 x 290mm
BCM 1500L-3 1500mm 1300mm 3 459mm 6 459 x 290mm
4
0
0
2
0
0
X
M
i
n
i
m
u
m
2
5
m
m
.
4
5
0
9
3
1
0
0
1
7
5
Top Ducted
Model
Body Width
Fanbox Width
No Lights Light Centres
No Filters Filter size
BCM 1000L-3 1000mm 800mm 2 436mm 6 292 x 290mm
BCM 1200L-3 1200mm 1000mm
2
545mm 8 272 x 290mm
BCM 1500L-3
1500mm
1300mm 3
459mm 6
459 x 290mm
Issue 01.08.2013
200
800
450
Power
Entry.
1
9-1
0
-2
0
1
2
B
o
d
y
W
i
d
t
h
8
0
0
4
2
5
Top Ducted
F
a
n
b
o
x
W
i
d
t
h
2
5
0
4
5
0
425
600
B
o
d
y
W
i
d
t
h
BOSTON (BCM)
The ues available for BCM rangehoods are
model No DL-BC BCM and come in lengths of
600, 900 or 1200mm.
10
Condor Rangehood Installation Instructions
C
CUBICA Specification Sheet
Wall Mounted
LED Lights
Electrical connection is to be at the
junction box inside the rangehood.
All island CUBICA rangehoods Have
3 fans to ensure all smoke from the
barbecue is removed from the
alfresco area.
Model
Body Width "A" No Lights Light Centres "B"
No Filters Filter size
C 1000L-3 1000mm 2 436mm 6 290 x 290mm
C 1200L-3 1200mm
2
545mm 8 272 x 290mm
C 1500L-3 1500mm 3 459mm 6 459 x 290mm
Top Ducted
Back Ducted
2
7
5
2
5
0
Issue 01.08.2013
4
5
0
Model
Body Width No Lights Light Centres
No Filters Filter size
C 1000L-3 1000mm 2 436mm 6 290 x 290mm
C 1200L-3 1200mm
2
545mm 8 272 x 290mm
C 1500L-3
1500mm
3
459mm 6
459 x 290mm
B
o
d
y
W
i
d
t
h
8
0
0
1
0
0
.
0
4
5
0
2
5
0
1
7
0
M
i
n
i
m
u
m
B
o
d
y
W
i
d
t
h
B
o
d
y
W
i
d
t
h
8
0
0
1
9
-1
0
-2
0
1
2
Switches on Right Hand
End Panel.
500mm - Min
1160mm - Max
1
2
0
.
0
8
0
0
B
o
d
y
W
i
d
t
h
CUBICA (C) - WALL MOUNTED
11
Condor Rangehood Installation Instructions
LED Lights
Electrical connection is to be at the
junction box inside the rangehood.
All BALTIMORE rangehoods have
3 fans to ensure all smoke from
the barbecue is removed from the
alfresco area.
BAL
BALTIMORE Specification Sheet
Top Ducted
Back Ducted
Wall Mounted
Model
Body Width "A" Lights Light Centres "B"
Filters Filter size
BAL 1000L-3 1000mm 2 436mm 6 290 x 290mm
BAL 1200L-3 1200mm
2
545mm 8 272 x 290mm
BAL 1500L-3 1500mm 3 459mm 6 459 x 290mm
1
0
0
450
800
100
700
X
M
i
n
i
m
u
m
2
5
m
m
2
0
0
.
0
4
0
0
.
0
4
5
0
.
0
9
3
1
0
0
.
0
Top Ducted
Model
Body Width Lights Light Centres
Filters Filter size
BAL 1000L-3 1000mm 2 436mm 6 290 x 290mm
BAL 1200L-3 1200mm
2
545mm 8 272 x 290mm
BAL 1500L-3
1500mm
3
459mm 6
459 x 290mm
1
4
5
Power
Entry.
Issue 01.08.2013
6
-9
-2
0
12
B
o
d
y
W
i
d
t
h
Top Ducted
3
9
5
The flues available for Baltimore
rangehoods are model No DL-BC
and come in lengths of 600, 900,
or 1200mm.
395
2
5
0
4
5
0
.
0
540
B
o
d
y
W
i
d
t
h
8
0
0
4
5
0
BALTIMORE (BAL)
The ues available for BAL rangehoods are
model No DL-BC BAL and come in lengths of
600, 900 or 1200mm.
12
Condor Rangehood Installation Instructions
INSTALLATION INSTRUCTIONS CONDOR RANGE
To suit island models:
• Darlington
• Falcon
• Cubica (Island)
• Cubica (Undercupboard)
It is recommended that the rangehood be mounted 100mm back from the edge of the
benchtop.
1. The rangehood can be installed between 1000mm and 1400mm above the cooking
surface. The installer should check for local requirements in case additional provisions
apply.
2. It is advisable to remove fans for easier handling of unit by removing retaining bolts or clips
and unplugging electrical connector.
3. Measure hole centres and duct size on top of the rangehood. This will vary with the hood
size, model and number of fans tted and will determine the ducting required.
4. Using a plumb line, mark the ceiling before making the cut out. Check for obstructions like
electrical cables etc.
5. Cut two (2) supporting beams approximately 1.0m long and pre-drill hole centres so that
the supporting beams are 90 degrees to the ceiling joists.
6. Fit 8mm all thread (threaded rod) through holes provided and secure with nuts and
washers.
7. Level unit by tensioning the 8mm nuts. Do not over tighten.
8. Fit off ducting as required.
13
Condor Rangehood Installation Instructions
ISLAND CONDOR INSTALLATION DETAILS
CEILING JOISTS
8mm
ALLTHREAD
8mm WASHER
8mm NUT
POWER
ENTRY
14
Condor Rangehood Installation Instructions
DAR
DARLINGTON Specification Sheet
B
o
d
y
W
i
d
t
h
4
5
0
2
5
0
8
0
0
1
1
0
0
LED Lights.
Electrical connection is to be at the
junction box inside the rangehood.
All DARLINGTON rangehoods have
3 fans to ensure all smoke from
the barbecue is removed from the
alfresco area.
240v Power Entry
Island Mounted
1200
Overall Width
Model Overall Width "A"
Body Width"B" No Lights Light Centres "C"
No Filters Filter size
DAR 1200L-3 1300mm 1200mm 4 580mm 8 272 x 290mm
DAR 1500L-3 1600mm 1500mm 4 730mm 6 459 x 290mm
Minimum Height - 500mm.
Maximum Height - 1160mm.
859
Model Overall Width
Body Width
Mounting Centres
No Lights Light Centres
No Filters Filter size
DAR 1200L-3 1300mm 1200mm 1035mm 4 580mm 8 272 x 290mm
DAR 1500L-3
1600mm 1500mm
1335mm 4 730mm
6
459 x 290mm
Allthread
Fixing Points.
ISSUE 01.08.2013
22-10-2
0
1
2
6
7
0
M
o
u
n
t
i
n
g
C
e
n
t
r
e
s
500mm - Min
1160mm - Max
DARLINGTON (DAR)
LED lights
Electrical connection by 3-pin
plug and lead.
15
Condor Rangehood Installation Instructions
FALCON (FAL)
LED lights
Electrical connection by 3-pin
plug and lead.
16
Condor Rangehood Installation Instructions
ICU
ISLAND CUBICA Specification Sheet
Island Mounted
LED Lights
Electrical connection is to be at the
junction box inside the rangehood.
All ISLAND CUBICA rangehoods Have
3 Fans to ensure all smoke from the
barbecue is removed from the
alfresco area.
7
0
0
M
o
u
n
t
i
n
g
C
e
n
t
r
e
s
Model
Body Width "A" Mounting Centres "B" No Lights Light Centres "C"
No Filters Filter size
ICU 1200L-3 1200mm 1100mm
2
544mm 8 272 x 290mm
ICU 1500L-3 1500mm 1400mm 3 459mm 6 459 x 290mm
3
5
0
Power
Entry
4
5
0
2
5
0
B
o
d
y
W
i
d
t
h
Alltread
Fixing Points.
Model
Body Width
Mounting Centres
No Lights Light Centres
No Filters Filter size
ICU 1200L-3 1200mm 1100mm
2
544mm 8 272 x 290mm
ICU 1500L-3
1500mm 1400mm
3
459mm 6
459 x 290mm
Issue 01.08.2013
22-1
0
-2
012
B
o
d
y
W
i
d
t
h
8
0
0
Switches on Right Hand
End Panel.
500mm - Min
1160mm - Max
L
i
g
h
t
C
e
n
t
r
e
s
B
o
d
y
W
i
d
t
h
CUBICA (ICU) - ISLAND
LED lights
Electrical connection by 3-pin
plug and lead.
17
Condor Rangehood Installation Instructions
Model
Body Width
Fan box Width
Fixing Points Lights Light Centres
Filters Filter Size
CUB 1000L-3 1000mm 950mm 720mm 2 580mm 6 290 x 290mm
CUB 1200L-3 1200mm 1150mm 920mm 2 544mm 8 272 x 290mm
CUB 1500L-3 1500mm 1450mm 1220mm 3 459mm 6 459 x 290mm
3 Fans, LED lights.
Electrical Connection is to be at the Junction Box Inside the Rangehood.
CUB
CUB Specification Sheet
Cupboard Cavity Mounted
Issue 01.08.2013
4
0
450
800
50
750
A
l
l
-
t
h
r
e
a
d
f
i
x
i
n
g
p
o
i
n
t
s
6
6
5
A
l
l
-
t
h
r
e
a
d
f
i
x
i
n
g
p
o
i
n
t
s
F
a
n
b
o
x
W
i
d
t
h
B
o
d
y
W
i
d
t
h
Power entry
4
5
0
2
5
0
CUBICA (CUB) - UNDERCUPBOARD
LED lights
Electrical connection by 3-pin
plug and lead.
18
Condor Rangehood Installation Instructions
CONDOR DUCTING
400. DL-4
DL-4 S/S
DL-4 C/P
401. HB-450X250
HB-450X250 S/S
HB-450X250 C/P
402. VB-450X250
VB-450X250 S/S
VB-450X250 C/P
404. VB-450X250/45
VB-450X250/45 S/S
VB-450X250/45 C/P
405. BD/WV-H-450X250
BD/WV-H-450X250 S/S
BD/WV-H-450X250 C/P
403. HB-450X250/45
HB-450X250/45 S/S
HB-450X250/45 C/P
All Condor ducting pieces are available in zincalume, stainless steel,
colourbond material or powderkote colour.
19
Condor Rangehood Installation Instructions
CONDOR DUCTING
406. BD/WV-V-450X250
BD/WV-V-450X250 S/S
BD/WV-V-450X250 C/P
409. WVC-H-450X250
WVC-H-450X250 S/S
WVC-H-450X250 C/P
410. WVC-V-450X250
WVC-V-450X250 S/S
WVC-V-450X250 C/P
407. RCB
RCB S/S
RCB C/P
408. RCBA
RCBA S/S
RCBA C/P
All Condor ducting pieces are available in zincalume, stainless steel,
colourbond material or powderkote colour.
20
Condor Rangehood Installation Instructions
FILTER CLEANING
RANGEHOOD CLEANING
For the best results, please clean filters regularly. Condari recommends cleaning filters
every 3-4 weeks, or immediately after heavy use.
You can do this by hand washing in warm soapy water, or by placing filtres in the dishwasher.
Condari does not recommend the use of any citrus or caustic products as this can cause
corrosion on the metal filters.
CONDOR rangehoods are made from stainless steel, either type 304 or type 316.
• Type 304 is classied as 18/8 stainless steel
• Type 316 is classied as 18/10 stainless steel.
This means that the stainless is made of 18% nickel and either 8% or 10% of chromium
respectively.
Stainless steel gets its protective coating from the chromium oxidising in the air to form a
protective surface of chromium oxide.
This protective surface can be attacked by salt in the air and by salt water, and then
corrosion can occur on the steel. It is important to clean and polish the stainless steel by
hand, allowing the chromium to oxidise again. Therefore if the alfresco area is by the sea,
one should take measures to protect the rangehood from corrosion.
It is suggested to wipe the hood down with vegetable oil if it is left in the open for long
periods of time.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24

Condari Condor Baltimore Installation Instructions Manual

Condor Baltimore
Brand
Condari
Model
Condor Baltimore
Type
Installation Instructions Manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents