2. Kohler
  3. K-19017-2-7

Kohler K-19017-2-7 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Kohler K-19017-2-7 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Features
•
Fits minimum 27-inch base cabinet if installed as top-mount or
as under-mount.
•
Single bowl.
•
13-inch depth.
•
2 faucet holes (-2).
•
Includes cutout templates.
Material
•
KOHLER
®
enameled cast iron.
Installation
•
Top-mount or under-mount installation.
•
Strainer not included.
Codes/Standards
Recommended Accessories
K-9000 P-Trap
ASME A112.19.1/CSA B45.2
K-8801 Sink Strainer
KOHLER
®
Enameled Cast Iron Kitchen
Sink Lifetime Limited Warranty
K-8799 Sink Strainer
See website for detailed warranty information.
Available Color/Finishes
Color tiles intended for reference only.
DescriptionCodeColor
White0
Biscuit96
Almond47
Black Black™7
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
9-28-2018 10:04
Glen Falls
™
Top-/Under-Mount Utility Sink
K-19017-2
12-1/2"
Notes
Technical Information
Install this product according to the installation
instructions.
All product dimensions are nominal.
SingleBowl configuration:
Top-mount, Under-mountInstallation:
27" (686 mm)Min. base cabinet
width:
Length: 21-1/2" (546 mm)
Width: 15-1/2" (394 mm)
Bowl area (Only):
Bowl depth: 13" (330 mm)
Water depth: 13" (330 mm)
2Number of deck holes:
1-3/8" (35 mm)Faucet hole(s):
3-7/8" (98 mm)Drain hole:
1079983-7, required, includedTemplate:
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
9-28-2018 10:04
Glen Falls
™
Top-/Under-Mount Utility Sink
K-19017-2
/