Oregon Scientific TH511 User manual

Category
Alarm clocks
Type
User manual
1/pc Cell battery
Tap and pushdown to open
the battery cover
The screen will light automatically
once connect electric, default
brightness is the highest .
The screen brightness controller key,
brightness will change from weak
brightness-middle brightness-high
brightness-off(cycle)
Connect the power adapter in
the rear of the lamp arm .
Touch buttons, touch dimmer
Lighting area:
Adjustable angle of the lamp stand:90
When adjusting the lamp arm,
please hold the base
The lamps arm and chimney activities:
When adjusting the lamp arm,
please hold the base
Arm adjustable range:180
(excessive adjustment may cause damage)
When adjusting the chimney,
please mind the joint-part to avoid clipping hands
Touch key:Light adjustable instruction (aspicture below)
Lamp switch
Cold light
increase brightness
decrease brightness
Nightlight button operation
(as picture below)
Press one second nightlight on or off, press three seconds colorful gradient cycle
Turn on the state of optionally substituted on the the color bar colors can be fixed color Steady
Calendar operation instruction:(as below picture)
Snooze function setting
In
normal mode, press mode” key to active alarm setting.
In
alarm mode, press set key to set the alarm time,sequence:
Hour- -Snooze-Music-Exit.Minute
3. up and down to turn on/off alarm and
Press press again to achieve next
function,sequence:
alarm on-snooze on-alarm off-snooze off.
Temperature switch
In normal mode, press
down” key to switch
between F” and C” display.
(please refer to the instructions on
the use keys)
4.When come to alarm time,
alarm will sound for one minute and sound again.
Press any key to turn it off.
Color Changing Mood LED Lamp
Dimmable
Max luminous(30cm)
Luminous flux
Working voltage
Color temperature
Max wattage
5-grade brightness
>1500LUX(30cm)
>500LM
12V
12W 1± W
Cold light 5500K±500K
Warm light 3000K±280K
Natural light 4200K±400K
Do not disassemble the product to avoid electrical shock.
Please use vender’s specified adapter and power socket, to maintain
normal working.
Please do not over-adjust the joint activity parts, to avoid any
damage to the lamp.
Please do not use the lamp in high-temperature or high-humidity
environment.
Please do not look at the LED lightsouce straightly, to avoid your
eyes hurt.
The power cord or power plug break
The lamp holder damp or rain
The shell and joint activities of the lamp holder breaks
The lamp holder smokes or sparks
The abnormal flickering or break of the LED light bulb
Please disconnect the product if the conditions listed below
occur:
H511
T
Date and Time setting
In normal mode,press ”set” key to achieve setting functions,press
Hour-Minute-Year-Month-Day.
2.Press and downto setting.”up”
In
setting mode,press mode or stop operation for one munite to exit
4. normal mode,pressIn
key to switch between or”12H””up” ”24H”
setting and display time.,
again to move next,sequence:
display.
EU Declaration of Conformity
Hereby, the manufacturer Oregon Scientific, declares that the
equipment type: Color Changing Mood LED Lamp (model:TH511)
is in compliance with the Directive 2014/30/EU.The full text of the EU
declaration of conformity is available at the following Internet address
www.oregonscientific.it
  • Page 1 1

Oregon Scientific TH511 User manual

Category
Alarm clocks
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI