Audiovox KLV39082 Owner's manual

Brand: Audiovox

Model: KLV39082

Category: DVD players

Type: Owner's manual

This manual is also suitable for

OWNER’S MANUAL

Model: KLV3913

12” Kitchen LCD HDTV / DVD Combo

Need More Help?

Please visit online help at

http://www.1800customersupport.com/audiovox

BESOIN D'AIDE ? APPELEZ LE SERVICE À LA CLIENTÈLE AU 1-800-645-4994

OU VISITEZ NOTRE SITE WWW.AUDIOVOX.COM

- 1 -

SAFETY PRECAUTIONS

The lightning flash with an arrowhead

symbol, within the equilateral triangle, is

intended to alert the user to the presence

of uninsulated "dangerous voltage" within

the product's enclosure that may be of

sufficient magnitude to constitute a risk of

electric shock to persons.

The exclamation point within the

equilateral triangle is intended to alert the

user to the presence of important operating

and maintenance (servicing) instructions

in this owner’s manual.

The following marks and symbols are located on

back of the unit.

On Placement

• Do not use the unit in places which are extremely hot, cold, dusty, or humid.

• Do not restrict the air flow of the unit by placing it in a place with poor air flow, by covering it with a cloth,

or by placing it on carpeting.

On Safety

• When connecting or disconnecting the AC power cord, grip the plug and not the cord itself. Pulling the cord

may damage it and create a hazard.

• The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquid, such as

vases, shall be placed on the apparatus.

On Condensation

• When left in a heated room where it is warm and damp, water droplets or condensation may form inside

the unit. When there is condensation inside the unit, the unit may not function normally. Let the unit stand

for 1 to 2 hours before turning the power on, or gradually heat the room and allow the unit to dry before

use.

Caution marking is located on back enclosure of the unit.

WARNING: TO REDUCE THE RISK OF FIRE OR

ELECTRIC SHOCK, DO NOT REMOVE COVER (OR

BACK). NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION:

USE OF CONTROLS OR ADJUSTMENTS OR

PERFORMANCE OF PROCEDURES OTHER THAN

THOSE SPECIFIED MAY RESULT IN HAZARDOUS

RADIATION EXPOSURE.

TO PREVENT ELECTRIC SHOCK, MATCH WIDE

BLADE OF PLUG TO WIDE SLOT OF WALL OUTLET,

THEN FULLY INSERT.

The symbol for Class

(Double lnsulation)

This product contains a

low power laser device.

CAUTION

INVISIBLE LASER RADIATION IS

EMITTED WHEN OPENED AND

INTERLOCKS DEFEATED.

AVOID EXPOSURE TO BEAM

- 2 -

SAFETY PRECAUTIONS

Notes on Copyright

It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public, or rent copyrighted material

without permission.

Apparatus Claims of U.S. Patent Nos. 6,836,549; 6,381,747; 7,050,698; 6,516,132; and 5,583,936 licensed for

limited viewing uses only.

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual

property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended

for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering

or disassembly is prohibited.

WARNING: Should any trouble occur, disconnect the AC power cord and refer servicing to a

qualified technician.

FCC Information

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired

operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not occur in

a particular installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for

compliance could void the user authority to operate the equipment.

This Class B digital apparatus complies with Canadian ICES-003.

Shielded cables must be used with this unit to ensure compliance with the Class FCC limits.

Warnings:

• The mains plug is used as disconnect device and it should remain readily operable during intended used.

In order to disconnect the apparatus from the mains completely, the main plug should be disconnected from

the mains socket outlet completely.

• Minimum 10 cm (4 inches) distances around the apparatus for sufficient ventilations.

• The ventilation should not be impeded by covering the ventilation openings with items such as newspaper,

table-cloths, curtains, etc.

• The use of apparatus in moderate climates.

- 3 -

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including

amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding type plug has two blades and a third grounding

prong. The wide blade or the third prong are provided for your safety. When the provided plug does

not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience recep-

tacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with a cart, stand, tripod, bracket, or table specified by the manu-

facturer, or sold with the apparatus. When a cart is used, use caution when

moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been

damaged in any way, such as the power-supply cord or plug is damaged, liquid has spilled or objects

have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate

normally, or has been dropped.

Portable Cart Warning

- 4 -

TABLE OF CONTENTS

Repeat Playback .................................................... 19

DVD Programmable Memory ................................ 20

DVD Programmable Memory........................... 20

Viewing JPEG FILes ............................................... 20

Play Modes for CD or JPEG Disc .......................... 21

Customizing the Function Settings ................. 22-23

Language ......................................................... 22

Video ................................................................ 22

Default .............................................................. 23

Using the TV ........................................................... 24

TV Setup ............................................................ 25-27

Listening to the Radio ............................................ 28

Troubleshooting Guide ........................................... 29

Maintenance ........................................................... 30

Specifications ........................................................ 30

Limited Warranty .................................................... 30

Safety Precautions .............................................. 1-2

Important Safety Instructions ................................. 3

Table of Contents ..................................................... 4

Disc Formats ............................................................ 5

Accessories ............................................................. 6

Remote Control ........................................................ 6

Control Reference Guide .....................................7 - 9

Mounting Instructions ....................................... 10-11

Connections ...................................................... 12-13

Connecting the TV Antenna .............................. 12

Connecting the Unit to a TV or

other Video Equipment ..................................... 12

Connecting the AM LOOP Antenna and FM Wire

Antenna ............................................................ 12

Plugging in the Unit .......................................... 13

Monitor Operation .................................................. 13

Unit Operation ........................................................ 14

Sound System ........................................................ 14

Setting the Clock .................................................... 15

Setting the Cooking Timer ..................................... 15

Playing a Disc ................................................... 16-18

Playing a Disc .................................................. 16

Pausing Playback............................................. 16

Stopping Playback............................................ 16

Skipping to a Different Chapter/Track ............... 16

Fast Forward/Fast Reverse ............................... 16

Angle Selection ................................................ 17

Subtitle Selection.............................................. 17

Audio Selection ................................................ 17

Display Function............................................... 18

Special Functions ................................................... 18

Locating a Specific Title/Chapter/Time.............. 18

Locating a Specific Track .................................. 18

Setting Favorite Bookmark During Playback..... 19

- 5 -

The unit can play

Region Management Information

Region Management Information: This unit is designed and manufactured to respond to the Region

Management Information that is encoded on DVDs. If the region number printed on the DVD does not

correspond to the region number of this unit, this unit cannot play that disc.

The region number of this unit is 1.

Disc Function or Operation that is Not Available

When the “ ” symbol appears on the screen, it indicates that the function or operation attempted is not

available at that time. This occurs because the DVD manufacturer determines the specific functions. Certain

functions may not be available on some discs. Be sure to read the documentation provided with the DVD.

Titles, Chapters and Tracks

• DVDs are divided into “titles” and “chapters”. If the disc

has more than one movie on it, each movie would be a

separate “title”. “Chapters” are sections of titles.

• Audio CDs are divided into “tracks”. A “track” is usually

one song on an Audio CD.

Icons Used on DVDs

Sample lcons

Language selections for audio

Language selections for subtitles

Screen aspect ratio

Multiple camera angles

Region code indicator

Note:

• When playing a CD-G (Graphics) or CD EXTRA disc, the audio portion will be played, but the graphic

images will not be shown.

DISC FORMATS

Notes on Unauthorized Discs

You may not be able to play back some DVDs on this unit if they were purchased from outside your

geographic area or made for business purposes.

Note :

Numbers identify each title, chapter, and track on a disc. Most discs have these numbers recorded

on them, but some do not.

DVDs

[8cm/12cm disc]

Audio CDs

[8cm/12cm disc]

Compatible

- 6 -

ACCESSORIES

Please Check and Identify the Included Accessories.

Remote control ............................................................................................................................. x 1

AAA 1.5V battery .......................................................................................................................... x 2

Mounting template ......................................................................................................................... x 1

1.06" (27mm) spacers .................................................................................................................. x 4

.57" (14.4mm) spacers ................................................................................................................. x 4

.32" (8.2mm) spacers ................................................................................................................... x 4

#M 5 x 69 mm screws .................................................................................................................... x 4

#M 5 x 40 mm screws ................................................................................................................... x 4

FM wire antenna ........................................................................................................................... x 1

AM LOOP antenna ........................................................................................................................ x 1

Battery Replacement

When the batteries become weak, the operating distance of the remote control is greatly reduced and you will

need to replace them.

Caution: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

Notes:

• Do not place the remote control near magnetic devices or magnetic cards.

• If the remote control is not going to be used for a long time, remove the batteries to avoid corrosion

damage caused by battery leakage.

• Do not mix old and new batteries. Do not mix ALKALINE, standard (CARBON-ZINC) or rechargeable

(NICKEL-CADMIUM) batteries.

• Always remove batteries as soon as they become weak.

• Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

• Weak batteries can leak and severely damage the remote control.

• WARNING: Do not dispose of batteries in a fire. Batteries may explode or leak.

To Install Batteries

1. Open the battery door. 2. Insert two AAA batteries.

REMOTE CONTROL

Using the Remote Control

• This remote control is magnetic and can be attached to most refrigerators. Some refrigerators panels

are not metallic. In this case, try attaching the magnetic remote control to the side of the refrigerator.

• Point the remote control at the REMOTE SENSOR located on the unit.

• When there is a strong ambient light source, the performance of the infrared REMOTE SENSOR may

be degraded, causing unreliable operation.

• The recommended effective distance for remote operation is about 16 feet (5 meters).

CAUTION: When discarding batteries, environmental problems must be considered and local rules or laws

governing the disposal of these batteries must be strictly followed.

- 7 -

CONTROL REFERENCE GUIDE

Remote Control

123

654

789

PICTURE

LAST CH

EXIT

DVD MENU

STOP

BAND

SOUND

FORMAT

MTS

MUTE

TV MENU

RETURN

10)

11)

12)

FUNCTION Button

Use to select DVD, TV or RADIO mode.

PICTURE Button

Selects from preset screen display

settings to match the type of show you

are watching.

MEMORY Button

Sets title/chapter in a favorite order.

Enter the number of a selected station.

• [dot] Button

Press to enter digital sub-channels (i.e.

11.3, 12.7).

EXIT/RETURN Button

Press to exit the TV menu and return

directly to normal viewing.

DVD MENU Button

Press to enter the main menu of the

DVD you are watching.

VOLUME (+/-) Buttons

Adjusts the volume.

/ TUNING Buttons

: Fast reverse playback.

: Fast forward playback.

TUNING : Scans all available

radio stations.

PREV Button

Selects previous titles, chapters or

tracks on a disc.

ANGLE Button

During DVD playback, switch the

camera angle of the video presentation

when scenes with multiple camera

angles are recorded on a DVD.

GOTO Button

Goes directly to a location on a DVD/

CD.

AUDIO Button

Selects audio soundtracks of a DVD or

change the output mode of a CD.

MTS Button

Press to select MONO sound,

STEREO sound or Secondary Audio

Program (SAP).

FORMAT Button

Press to select the picture format.

- 8 -

CONTROL REFERENCE GUIDE

Remote Control

123

654

789

PICTURE

LAST CH

EXIT

DVD MENU

STOP

BAND

SOUND

FORMAT

MTS

MUTE

TV MENU

RETURN

STANDBY/ON Button

Turns on the unit and puts it in standby

mode.

Number (0-9) Buttons

LAST CH Button

Press to switch repeatedly between the

last two channels displayed.

TV MENU Button

Press to display the on-screen TV

menu.

CURSOR ( , , , ) Buttons

Use to highlight selections on a screen

and make adjustments to certain

settings.

CH+ / CH- buttons

Use to change TV channels.

ENTER Button

Confirm selections on a menu screen.

MUTE Button

Press to turn off the sound.

STOP/BAND Button

Stops playback.

Switches between AM and FM.

PLAY Button

Starts playback.

PAUSE Button

Pauses playback, frames advance.

NEXT Button

Selects next titles, chapters or tracks

on a disc.

SOUND Button

Press to select from preset sound

settings to match the type of show you

are watching.

SUBTITLE Button

Selects one of the subtitle languages

programmed on a DVD.

SETUP Button

Enters and exits the SETUP menu of

the DVD.

REPEAT Button

Repeats chapter or title of a DVD.

Repeats single track or whole CD.

DISPLAY Button

Changes disc status information

displayed on the screen.

13)

14)

15)

16)

17)

18)

19)

20)

21)

22)

23)

24)

- 9 -

CONTROL REFERENCE GUIDE

1) Disc Tray

Opens or closes the tray by pressing OPEN/

CLOSE button.

Place a disc on the disc tray, label side up.

2) Display Window

Displays system information.

3) POWER ON Indicators

DVD : DVD indicator

TV : TV indicator

RADIO : RADIO indicator

4) Remote Sensor

Receives the remote control unit signals.

5) ON/OFF Button

Turns the unit on and off.

6) OPEN/CLOSE Button

Use to open/close the disc tray.

7) TV MENU Button

Opens and closes the TV menu.

8) ENTER Button

Use to enter the sub-menu and confirm

selections in TV mode.

9) SET CLOCK Button

Use to set the current time.

10) DVD/TV/RADIO Button

Use to select DVD, TV or RADIO mode.

11) TIMER Button

Use to set the cooking timer.

12) PREV/ NEXT/ ADJUST Buttons

PREV Button

Press to go back to previous chapters/

tracks.

NEXT Button

Press to advance to chapters / tracks.

ADJUST Buttons

Makes adjustments to certain settings.

Use to search for a station automatically or

select presetted stations.

13) CH Buttons

Use to skip/search TV channel.

14) PLAY Button

Press to start or resume playback of a disc.

15) / BAND (AM/FM) Button

Stops playing a disc.

Switches between AM and FM.

16) VOLUME +/- Buttons

Adjusts the volume levels.

17) Screen

Unit

- 10 -

MOUNTING INSTRUCTIONS

b)Fold the Mounting Template along the guideline

that is closest to the thickness of your cabinet

overhang.

c)Tape Mounting Template to the underside of

the cabinet with the folded portion of the

Mounting Template flush up against the cabinet

overhang (see Figure 2). Go to STEP 2.

If your cabinet DOES have an overhang:

a)Measure the thickness of the cabinet overhang

(see Figure 1).

STEP 1

If your cabinet does NOT have an overhang:

a)Place the Mounting Template in the desired

location inside or underneath the cabinet

(whichever has less obstructions, and will be

easier for you to reach to drill holes), flush

with the front edge of the cabinet and tape it

down. Go to STEP 2.

STEP 2

Use an electric drill with a ¼” drill bit (not included)

to drill all four holes marked on the Mounting

Template (see Figure 3). To reduce splintering, place

a small piece of masking tape over each hole

location before drilling. Go to STEP 3.

If your cabinet DOES have an overhang:

a) Eight screws are included with this unit, but you

will only need four of them. Select the screw

length which will go completely through your

cabinet bottom, and extend at least 3/8" past

the bottom of your cabinet overhang.

b) This unit includes three sets of four spacers of

various lengths. The spacers can be put

together to form longer spacers to

accommodate various cabinet overhang

thicknesses. Determine the best combination

of spacers which is equal to or longer than the

cabinet overhang thickness.

c)Hold the unit up against the bottom of the

cabinet, and align the four holes on the top of

the unit with the screws. Partially tighten each

screw, but do not fully tighten the screws until

all of them have been started.

d)Gently tighten each screw until they are firmly

holding the unit in place.

(Continued on next page)

STEP 3

If your cabinet does NOT have an overhang:

a)Eight screws are included with this unit, but

you will only need four of them. Select the

screw length which will go completely through

your cabinet bottom, and provide at least 3/8"

of thread to screw into the main unit.

b)Insert the four selected screws through each

hole from the inside of the cabinet going down

(see Figure4).

Cabinet Bottom

Front

edge

Figure 1

Figure 3

Cabinet Bottom

Front

edge

Template

Figure 2

Figure 4

TOOLS NEEDED: 1) Electric drill with 1/4” bit; 2) Phillips-head (cross style) screwdriver.

- 11 -

e) Partially tighten each screw, but do not fully

tighten the screws until all of them have been

started (see Figure 6).

f) Gently tighten each screw until they are firmly

holding the unit in place. The top front edge of

the unit should clear the overhang.

MOUNTING SUGGESTIONS

1) If your cabinet has obstructions inside it which prevent you from using the template, cut out the

corresponding area on the template, but do NOT cut out or through the screw holes.

2) If your cabinet has obstructions underneath it, which will interfere with the mounting of the unit, remove

the obstruction before mounting the unit, or find another location to mount the unit.

3) It is recommended that you wear safety glasses while drilling to prevent eye injuries.

4) For wood cabinets, you may want to mark the hole locations with a nail, pressed gently but firmly into

the wood so that a slight impression is made. This will also help keep the drill bit centered in the right

location.

5) Hold the drill firmly against the cabinet to keep the drill from “walking”.

(Continued from previous page)

c) Insert the four selected screws through each

hole from the inside of the cabinet going down

(see Figure 5).

MOUNTING INSTRUCTIONS

Figure 5

Figure 6

d) Hold each screw head down and push the unit

and spacers onto the screws, then hold the

unit up until spacers are firmly against the

bottom of the cabinet (and fully nested within

each other if you are using multiple spacers

for each screw).

TO REDUCE THE RISK OF FIRE, DO NOT PLACE ANY HEATING OR COOKING

APPARATUS BENEATH THIS UNIT.

CAUTION

- 12 -

CONNECTIONS

Connecting the TV Antenna

Connect a TV antenna or CATV cable or Satellite system to the TV antenna terminal.

Connecting the Unit to a TV or other Video Equipment

Use the Video cable (not supplied). Connect the VIDEO OUT on the rear of the unit to the VIDEO IN on

your TV or other video equipment.

TV antenna

To the TV ANT

IN terminal

Video cable (not supplied)

(yellow)

TV or otherVideo

Equipment

VIDEO

Connecting the AM LOOP Antenna and FM Wire Antenna

Connect the AM LOOP antenna (included) to the AM LOOP ANT terminal and the FM wire antenna

(included) to the FM ANT terminal.

FM: Fully unwind the antenna wire and position it for the best reception.

AM: Fully unwind and rotate the loop antenna then position it for the best reception.

- 13 -

MONITOR OPERATION

Follow the illustrations below to open the monitor.

1.Gently pull the monitor down from the back, and twist it clockwise so the screen is visible.

2.The screen can be turned up to 270

. Do NOT force the screen once it stops turning. The screen

does NOT turn completely around.

CONNECTIONS

Plugging in the Unit

Plug the AC power cord into the wall outlet

a) Before plugging in the power cord, make sure the voltage of the unit matches your local voltage.

b) Plug the power cord directly into the nearest wall outlet, and wrap the remaining cord around the cord

storage knob at the rear of the unit.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT OF

WALL OUTLET, THEN FULLY INSERT.

To AC outlet

AC power cord

- 14 -

UNIT OPERATION

Turning the Unit On

While the power cord is connected and the unit is on standby, power will be consumed and only the clock

display will flash.

Dolby Digital (for DVD)

Dolby Digital is a technology developed by Dolby Laboratories. Soundtracks encoded in Dolby Digital can

reproduce from one to 5.1 discrete channels of excellent quality audio.

The unit automatically recognizes the Dolby Digital bitstream and provides a downmix suitable for two-

channel listening. An additional Dolby Digital decoder is required for reproduction of the discrete multi-

channel soundtracks available on many DVDs.

Manufactured under license from Dolby Laboratories.

‘Dolby’ and the double-D symbol are trademarks of Dolby Laboratories.

SOUND SYSTEM

• Press the ON/OFF button to turn the unit on and the DVD indicator lights up.

After a short period of time, “DVD” will appear on the front display and the DVD logo (start-up picture) will

appear on the screen.

• Press the DVD/TV/RADIO button (the FUNCTION button on the remote control) to TV mode and the TV

indicator lights up.

After a short period of time, “TV” will appear on the front panel display and the TV program will begin on the

screen.

• Press the DVD/TV/RADIO button (the FUNCTION button on the remote control) to RADIO mode and the

radio indicator lights up.

After a short period of time, “TUNER” and the FM frequency will appear on the front panel display.

- 15 -

SETTING THE CLOCK

To adjust the clock, the unit must be in standby mode. To enter standby mode, make sure that the unit is

plugged in, but not turned on.

• Check that the rated voltage of the unit matches your local voltage.

4. Press the / buttons to set the current

minutes then press the SET CLOCK button

once to start the clock.

1. When the AC power cord is plugged in, the

clock display will blink.

SETTING THE COOKING TIMER

1. Press the TIMER button. The “TIMER” indicator

appears and the cooking time “10” blinks.

2. Press the / buttons to select your

desired time from 1-99 minutes.

• Press the TIMER button repeatedly to select

time: 10, 15, 30, 45, 60, 75, 90 minutes.

• Press and hold the / buttons to fast

forward/reverse the cooking time.

4. To turn OFF the ALARM, press the TIMER

button once. Otherwise, the ALARM will

automatically turn off after 60 minutes if no button

is pressed.

CANCELLING THE COOKING TIMER

• Press the TIMER button until the time of the cooking timer shows "OFF". The “TIMER” indicator will

disappear.

3. When the preset time elapses, the ALARM will

sound.

3. Press the / buttons to set the current

hours then press the SET CLOCK button once

to confirm. Then, the MINUTE blinks.

2. Press the SET CLOCK button until the HOUR

blinks.

- 16 -

This owner’s manual explains the basic instructions of this unit. Some DVDs are produced in

a manner that allows specific or limited operation during playback. Such as, the unit may not

respond to all operating commands. This is not a defect in the unit. Refer to the instruction

notes of discs.

“ ” may appear on the screen during operation. A “ ” means that the desired operation is not

permitted by the unit or disc.

Playing a Disc

1. Press the ON/OFF button to turn on the unit.

2. Press the DVD/TV/RADIO button (the FUNCTION button on the remote) to select DVD mode.

See CUSTOMIZING THE FUNCTION SETTINGS (page 22 to 23) before proceeding to step 3.

3. Press the OPEN/CLOSE button. The disc tray opens.

4. Place a disc onto the disc tray with the label side up.

5. Press the OPEN/CLOSE button. The disc tray closes.

It takes a short while for your unit to load the disc. After loading, the unit will automatically either bring

you to the main menu of the DVD or start playback of the disc.

6. If the unit does not automatically start playing the DVD, press the PLAY button.

Pausing Playback (Still Mode)

Press the PAUSE button on the remote. To resume normal playback, press the PLAY button.

Each time you press the PAUSE button, the picture advances one frame.

Stopping Playback

Press the button at the location where you want to interrupt playback. To resume playback at the

position where the disc was stopped, press the PLAY button.

If you press the button twice, the unit’s memory will be cleared and pressing the PLAY button will reset

the disc to the beginning.

Skipping to a Different Chapter/Track

• Press the button repeatedly to skip to the start of the current or previous chapter/track.

• Press the button to skip to the next chapter/track.

• For an audio CD, use the number buttons (remote control only) to go directly to that track number.

Fast Forward/Fast Reverse

1. Press the TUNING or TUNING button on the remote control when a disc is playing.

• The disc begins fast scan at x2 speed.

• Four speeds are available. Each time the TUNING or TUNING button is pressed, the speed

of fast scan changes in the following sequence:

PLAYING A DISC

2. Press the PLAY button when you have reached the desired point to resume playback at normal

speed.

Notes:

• The DVD player mutes sound during reverse and forward scan of DVD video discs.

• The fast playback speed may differ depending on the disc.

• When MUTE is pressed, the sound is mute and the “L O”

indicator always blinks on the LCD display until MUTE is

pressed again or VOL is pressed.

- 17 -

PLAYING A DISC

Angle Selection

Some DVDs contain scenes which have been shot from a number of different angles. For these discs,

the same scene can be viewed from each of these different angles.

1. While you are playing a DVD with different angles

recorded, press the ANGLE button to view the num-

ber of current angles available.

2. Press the ANGLE button repeatedly to change the

scene to the next angle in those recorded.

• About two seconds later, playback continues from

the new angle selected.

• If no button is pressed within 10 seconds, playback

continues without changing the current angle.

Notes:

• This function can only be used for discs on which scenes shot from multiple angles have been

recorded.

• If only one angle is recorded, “ ” is displayed.

Sequence of angle shots

(Example)

Notes:

• If only one language is recorded, the language does not change.

• About two seconds later, playback continues with the new subtitle selected.

• The number of languages recorded differs depending on the disc.

• If no button is pressed within a few seconds, playback continues without changing the current subtitle.

• This function can only be used for discs on which subtitles have been recorded in multiple languages.

• On some DVDs, subtitles are activated from the main menu of the DVD. Press the DVD MENU button

to activate the main menu.

Subtitle Selection

1. While a DVD is playing, press the SUBTITLE button to display the current language setting, as

shown in the example below.

2. Press the SUBTITLE button repeatedly to select the desired subtitle language.

Notes:

• If only one audio format is recorded, the number does not change.

• Some DVD discs allow you to change audio selections only via the disc menu. If this is the case,

press the DVD MENU button and choose the appropriate language on the disc menu.

• You can select different audio channels (Left, Right, Mix or Stereo) on an audio CD by pressing the

AUDIO button repeatedly.

Audio Selection

On some discs, the sound is recorded in two or more formats. Follow the directions below to select the

type of playback.

1. While a disc is playing, press the AUDIO button to show the current audio format number.

2. Press the AUDIO button repeatedly to select the desired audio format.

- 18 -

SPECIAL FUNCTION

PLAYING A DISC

Locating a Specific Title/Chapter/Time

If a DVD contains title/chapter/time numbers, you can locate a specific title/chapter/time by directly

selecting a title/chapter/time number.

1. Press the GOTO button to display Title.

2. Press the or button on the remote to select the option (Title,

Chapter or Time) then press the corresponding number button(s)

for the Title/Chapter/Time you want.

3. Press the ENTER button to confirm. The unit will start playback

about 3 seconds later.

Locating a Specific Track

If a CD contains track numbers, you can locate a specific track by directly selecting track number.

1. Press the GOTO button.

2. Press the or button on the remote to select the option (Track,

Time or Disc Time) then press the corresponding number button(s)

for the Track/Time/Disc time you want.

3. Press the ENTER button to confirm. The unit will start playback

about 3 seconds later.

Notes:

• If the time numbers you entered is not permited by the DVD, after you press the ENTER button, it will

restore to “- - : - - : - -”. You should re-enter correct numbers.

• Some discs may not respond to this process.

• Some scenes may not be located as precisely as you specified.

• This method for accessing specific locations is available only within the current title of the DVD.

Display Function

While the disc is playing, press the DISPLAY button on the remote control repeatedly to display information

on operation status.

Time: The elapsed time from the beginning of the title

which is currently playing.

Title/Chapter: The number of the title/chapter currently playing

and total titles/chapter on disc.

Audio: The type of the audio currently selected is

displayed.

Subtitle: The subtitle number and language currently

selected is displayed. When a disc with only one

subtitle is played back, “ ” is displayed.

Angle: The current angle is displayed. When a disc with

only one angle is played back, “ ” is displayed.

- 19 -

Setting Favorite Bookmarks During Playback

While a disc is playing, you can mark the desired scene.

1. Press the GOTO button until Bookmark1 appears.

2. Press the ENTER button to mark the desired scene and the time of

this point will be shown in Bookmark1.

3. Press the ENTER button to play the favorite bookmark.

To Set Other Bookmarks

1. Press the GOTO button until Bookmark1 appears, then use the

or button on the remote to select Bookmark2/Bookmark3.

2. Press the ENTER button.

Notes:

• Some discs may not work with marking operation.

• The marking is cancelled when you open the disc tray or turn the unit off.

SPECIAL FUNCTION

You can play a specific title or chapter repeatedly.

Repeating a Chapter

You can play the same chapter repeatedly.

1. While the disc is playing, press the REPEAT DISC button until the “ ” indicator displays on

the screen. The current chapter is played repeatedly.

To Resume Normal Playback

3. While the disc is playing, press the REPEAT DISC button until the “ ” indicator displays on the

screen.

Repeating a Title

You can play the same title repeatedly.

2. While the disc is playing, press the REPEAT DISC button until the “ ” indicator displays on

the screen. The current title is played repeatedly.

Repeating a Whole Disc

2. While the disc is playing, press the REPEAT DISC button on the remote control until the “ ”

indicator displays on the screen. The whole disc is played repeatedly.

To Resume Normal Playback

3. Press the REPEAT DISC button until the “ ” indicator

displays on the screen.

You can play a single track or whole disc repeatedly.

Repeating a Single Track

You can play the same track repeatedly.

1. While the disc is playing, press the REPEAT DISC button on the remote control until the “ ”

indicator displays on the screen. The current track is played repeatedly.

You can play a single track or the entire CD repeatedly through the

Toolkit which appears on the right in the window.

While the disc is playing, use the and buttons on the remote to select

"Repeat", then press the ENTER button to select Single/All/Off.

Single: Repeat the current track.

All: Repeat the entire CD.

Off: Resume normal playback

REPEAT PLAYBACK

Page is loading ...

Audiovox KLV39082 Owner's manual

Brand: Audiovox

Model: KLV39082

Category: DVD players

Type: Owner's manual

This manual is also suitable for

Download PDF

report

Audiovox KLV39082 Owner's manual

This manual is also suitable for

Audiovox KLV39082 Owner's manual

Related papers

Other documents