American Standard T555.700.295 Installation guide

American Standard
Brand
American Standard
Model
T555.700.295
Category
Sanitary ware
Type
Installation guide

This manual is also suitable for

American Standard T555.700.295 ON/OFF Valve Trim is a high-quality product from a trusted brand. It is designed to be easy to install and use, and it comes with a variety of features that make it a great choice for any bathroom.

The T555.700.295 is made from durable materials that are resistant to corrosion and wear. It features a sleek, modern design that will complement any bathroom décor. The valve trim is also easy to clean and maintain, thanks to its smooth finish.

One of the best features of the T555.700.295 is its versatility. It can be used with a variety of different faucets and showerheads, making it a great choice for both new construction and remodeling projects. The valve trim also comes with a variety of different finishes, so you can find the perfect match for your bathroom.

American Standard T555.700.295 ON/OFF Valve Trim is a high-quality product from a trusted brand. It is designed to be easy to install and use, and it comes with a variety of features that make it a great choice for any bathroom.

The T555.700.295 is made from durable materials that are resistant to corrosion and wear. It features a sleek, modern design that will complement any bathroom décor. The valve trim is also easy to clean and maintain, thanks to its smooth finish.

One of the best features of the T555.700.295 is its versatility. It can be used with a variety of different faucets and showerheads, making it a great choice for both new construction and remodeling projects. The valve trim also comes with a variety of different finishes, so you can find the perfect match for your bathroom.

ON/OFF VALVE TRIM
Installation
Instructions
T555700
TOWN SQUARE
Thank you for selecting American-Standard...the
benchmark of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--please
read these instructions carefully before you begin.
Certified to comply with ANSI A112.18.1M
ASSE 1016
ROUGHING-IN DIMENSIONS
Recommended Tools
Flat Blade Screwdriver
Phillips Screwdriver
Remove as much surface dirt and film using clear
water and soft cotton cloth
(as described above).
Use any of the following to remove tough surface
film and build-up:
Mild liquid detergents
Clear ammonia free liquid glass cleaners
Non-acidic, non-abrasive gentle liquid or fully
dissolved powder cleansers mixed according to
manufacturers directions.
Non-abrasive liquid polishers
Once clean, rinse faucet again with clear water to
thoroughly remove cleaner or polish and blot dry with
a soft cotton cloth.
To keep your new faucet looking new, please follow
these simple care instructions:
DO: Simply rinse the faucet clean with clear water.
Dry the faucet with a soft cotton cloth.
DO NOT:
Do not use any abrasive cleaners, cloths, or
paper towels.
Do not use any cleaning agents containing
acids, polish abrasives, or harsh cleaners or
soaps.
Regular and routine cleaning will reduce the need for
heavy cleaning and polishing. If heavy cleaning is
required, the following procedures are recommended:
CARE INSTRUCTIONS:
Failure to follow these care instructions may
damage the Faucet's finish.
M968657 Rev.1.2
FINISHED
WALL
60mm±13mm
(2-3/8 ± 1/2)
35mm-59mm
(1-3/8 - 2-3/8)
51mm
(2)
UNION INLET
1/2" - 14 NPT
OR
5/8" O.D.
COPPER
SWEAT
52mm
(2-1/8)
DIA. HOLE
52mm
(2-1/8)
DIA. HOLE
1/2" NPT
FEMALE
OUTLET
1/2" NPT 3/4" NPT
75mm
(2-7/8)
75mm
(2-7/8)
Model 7001.000 Model 7011.000
FINISHED
WALL
64mm
(2-1/2)
3/4" NPT
FEMALE
THREADED
INLET
3/4'' NPT
MALE
THREADED
OUTLET
OPERATING THE VALVE
1
TRIM INSTALLATION
1
3
6
2
4
3
2
HANDLE INSTALLATION
3
Place ESCUTCHEON HOLDER (3) over VALVE COVER (1). Line up holes in ESCUTCHEON HOLDER (3) with THREADED TABS (4) on VALVE.
Install MOUNTING SCREWS (5) through ESCUTCHEON HOLDER (3) and into THREADED TABS (4). Tighten SCREWS securely.
Place ESCUTCHEON (6) over ESCUTCHEON HOLDER (3) and push evenly for a snap fit.
Push VALVE COVER (1) over VALVE CARTRIDGE (2) until it is seated against the stop.
5
OFF
ON
Turn HANDLE into OFF position.
Turn on water supplies, and check all connections for leaks.
Operate HANDLE to flush water lines thoroughly.
Turn HANDLE OFF.
M968657 Rev.1.2
4
5
1
2
Install HANDLE ADAPTER (1) onto VALVE STEM (2).
Push HANDLE BASE (3) onto HANDLE ADAPTER (1).
Install HANDLE SCREW (4) and tighten.
Push in INDEX CAP (5).
  • Page 1 1
  • Page 2 2

American Standard T555.700.295 Installation guide

American Standard
Brand
American Standard
Model
T555.700.295
Category
Sanitary ware
Type
Installation guide
This manual is also suitable for

American Standard T555.700.295 ON/OFF Valve Trim is a high-quality product from a trusted brand. It is designed to be easy to install and use, and it comes with a variety of features that make it a great choice for any bathroom.

The T555.700.295 is made from durable materials that are resistant to corrosion and wear. It features a sleek, modern design that will complement any bathroom décor. The valve trim is also easy to clean and maintain, thanks to its smooth finish.

One of the best features of the T555.700.295 is its versatility. It can be used with a variety of different faucets and showerheads, making it a great choice for both new construction and remodeling projects. The valve trim also comes with a variety of different finishes, so you can find the perfect match for your bathroom.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents