Battery Life & Power
Up to 5.5 hours continuous swing recording (varies by use)
Sensor enters sleep mode after 5 minutes of non-use. Press 1x to turn back
on.
Charging
Up to 2.5 hours for a full charge cycle
1. Grab your smartphone or tablet and turn on Bluetooth (Settings
> Bluetooth).
2. Turn on your sensor. It will automatically enter pairing mode
when turned on for the first time. To manually enter pairing mode
or reconnect with a paired device, press the button 2x.
3. Wait for your device to detect your Zepp Sensor and then select
it in the Bluetooth menu to pair and connect.
4. If prompted to enter a PIN to successfully pair, simply press "OK"
or "Accept" and continue. No PIN is required to pair the Zepp
Sensor.
Having trouble? Click here »
Watch Video
Attach the mount to your glove strap and insert the sensor with
the button pointing toward you body so that you can easily press
the button.