Spirit CT900 Owner's manual

Brand: Spirit

Model: CT900

Category: Fitness, gymnastics & weight training

Type: Owner's manual

CT900 TREADMILL

OWNER’S MANUAL

Spirit Fitness

www.spirittness.com

TABLE OF CONTENTS

3 IMPORTANT SAFETY INSTRUCTIONS

4 IMPORTANT ELECTRICAL INSTRUCTIONS

6 IMPORTANT OPERATION INSTRUCTIONS

6 PRODUCT REGISTRATION

7 CT900 ASSEMBLY INSTRUCTIONS

13 CONSOLE OPERATION

19 PROGRAMMABLE FEATURES

36 GENERAL MAINTENANCE

37 MANUFACTURER’S LIMITED WARRANTY

Thank you for purchasing our product, please save these instructions. Please do not perform or attempt any

customizing, adjustments, repair or maintenance that is not described in this manual.

Spirit Fitness

Congratulations on your new treadmill and welcome to the Spirit Fitness family!

Thank you for your purchase of this quality treadmill from Spirit Fitness. Your new treadmill was

manufactured by one of the leading tness manufacturers in the world and is backed by one of the

most comprehensive warranties available. Through your dealer, Spirit Fitness will do all we can to

make your ownership experience as pleasant as possible for many years to come. If not purchased

direct from Spirit Fitness, the local dealership where you purchased this treadmill is your administrator

for all Spirit Fitness warranty and service needs. Their responsibility is to provide you with the technical

knowledge and service personnel to make your experience more informed and any difculties easier

to remedy.

Please take a moment at this time to record the name of the dealer, their telephone number, and the

date of purchase below to make any future, needed contact easy. We appreciate your support and we

will always remember that you are the reason that we are in business.

Yours in Health,

Spirit Fitness

NAME OF DEALER _____________________________________

DEALER PHONE # _____________________________________

PURCHASE DATE _____________________________________

www.spirittness.com

IMPORTANT SAFETY

INSTRUCTIONS

DANGER —To reduce the risk of electric shock,

always unplug this treadmill from the electrical

outlet immediately after using and before cleaning.

WARNING

To reduce the risk of burns, re electric shock, or

injury to persons:

• Before beginning this or any exercise program,

consult a physician. This is especially important for

persons over the age of 35 or persons with pre-

existing health conditions.

• Keep children away from the treadmill. There are

obvious pinch points and other caution areas that

can cause harm.

• Keep hands away from all moving parts.

• Never drop or insert any object into any openings.

• Do not use outdoors.

• Do not attempt to use your treadmill for any purpose

other than for the purpose it is intended.

• The hand pulse sensors are not medical devices.

Various factors, including the user’s movement, may

affect the accuracy of heart rate readings. The

pulse sensors are intended only as exercise aids in

determining heart rate trends in general.

• Wear proper shoes. High heels, dress shoes,

sandals or bare feet are not suitable for use on your

elliptical. Quality athletic shoes are recommended to

avoid leg fatigue.

• Maximum User Weight: 450 lbs,

• This appliance is not intended for use by persons

with reduced physical, sensory or metal capabilities,

or lack of experience and knowledge, unless

they have been given supervision or instruction

concerning use of the appliance by a person

responsible for their safety.

• Keep children under the age of 13 away from this

machine.

• Never operate this treadmill if it has a damaged

cord or plug, if it is not working properly, if it has

been dropped or damaged, or dropped into water.

• Keep the cord away from heated surfaces.

• Do not operate where aerosol (spray) products are

being use or where oxygen is being administered.

• Connect this treadmill to a properly grounded outlet

only. See Grounding Instructions.

• ASTM F2115-05 Specications 6.1.2.11—The

Spirit Fitness

recommended minimum clearance required around each treadmill for access to, passage around, and

emergency dismount shall be stated. The minimum dimensions are to be: 0.5 m (19.7 in.) on each side of the

treadmill, and 1 m (39 in.) behind the machine.

SAVE THESE INSTRUCTIONS - THINK SAFETY!

IMPORTANT ELECTRICAL INSTRUCTIONS

WARNING

NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. As with any appliance with

a large motor, the GFCI will trip often. Route the power cord away from any moving part of the treadmill

including the elevation mechanism and transport wheels.

NEVER remove any cover without rst disconnecting AC power. If voltage varies by ten percent (10%) or

more, the performance of your treadmill may be affected. Such conditions are not covered under your

warranty. If you suspect the voltage is low, contact your local power company or a licensed electrician for

proper testing.

NEVER expose this treadmill to rain or moisture. This product is NOT designed for use outdoors, near a pool

or spa, or in any other high humidity environment. The operating temperature specication is 40 to 120

degrees Fahrenheit, and humidity is 95% non-condensing (no water drops forming on surfaces).

Circuit Breakers: Some circuit breakers are not rated for high inrush currents that can occur when a treadmill

is rst turned on or even during use. If your treadmill is tripping the circuit breaker (even though it is the proper

current rating) but the circuit breaker on the treadmill itself does not trip, you will need to replace the facility

www.spirittness.com

breaker with a high inrush type. This is not a warranty defect. This is a condition we as a manufacture have

no ability to control. This part is available through most electrical supply stores. The electrical outlet used

should have a dedicated 20-amp circuit breaker.

GROUNDING INSTRUCTIONS

This product must be grounded. If the treadmill should malfunction or break down, grounding provides a path

of least resistance for electric current, reducing the risk of electric shock. This product is equipped with a cord

having an equipment-grounding plug. The plug must be plugged into an appropriate outlet that is properly

installed and grounded in accordance with all local codes and ordinances.

DANGER – Improper connection of the equipment-grounding conductor can result in a risk of electric shock.

Check with a qualied electrician or serviceman if you are in doubt as to whether the product is properly

grounded. Do not modify the plug provided with the product if it will not t the outlet; have a proper outlet

installed by a qualied electrician.

This product is for use on a nominal 110-volt/20 amp dedicated circuit, and has a grounding plug that

looks like the plug illustrated below. A temporary adapter that looks like the adapter illustrated may be used

to connect this plug to a 2-pole receptacle as shown if a properly grounded outlet is not available. The

temporary adapter should be used only until a properly grounded outlet can be installed by a qualied

electrician. The green colored rigid ear-lug, or the like, extending from the adapter, must be connected to a

permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used, it must be

held in place by a metal screw.

Spirit Fitness

IMPORTANT OPERATION INSTRUCTIONS

• NEVER operate this treadmill without reading and completely understanding the results of any operational change

you request from the computer console.

• Understand that changes in speed or incline do not occur immediately. Set your desired speed or incline level on the

computer console and release the adjustment key. The computer will obey the command gradually.

• Use caution while participating in other activities while on your Treadmill; such as watching television, reading, etc.

These distractions may cause you to lose balance which may result in serious injury.

• Do not use excessive pressure on console control keys. They are precision-set to function properly with little

nger pressure.

RECORD YOUR SERIAL NUMBER

Please record the serial number of this tness product in the space provided below. The serial number is

located at the front of the treadmill by the Power switch.

SERIAL NUMBER:

The self-addressed product registration card must be completed in full and returned to Spirit Fitness. You can

also go to www.spirittness.com/commercialwarrantyregistration.html under the Support tab to register online.

www.spirittness.com

CT900 PRE-ASSEMBLY

TOOLS INCLUDED:

 8mm Allen Wrench

 2 Phillips Screwdrivers

PARTS INCLUDED:

 1 Main Frame

 2 Uprights

 1 Main Panel

 1 Console

 1 Console Bracket Cover

 4 Handrail Covers

 2 Upright Covers

 2 End Caps

UNPACKING

1. Cut the straps and open box.

2. Locate the hardware package. The hardware is separated into four steps. Remove

the tools rst. Remove the hardware for each step as needed to avoid confusion.

The numbers in the instructions that are in parenthesis (#) are the item number from

the assembly drawing for reference.

Spirit Fitness

CT900 STEP ONE

HARDWARE FOR STEP 1

PART TYPE DESCRIPTION QTY

65 BOLT M10XP1.5X60L 10

79 LOCK WASHER Ø10 10

1. Loosen the 8 screws holding the MOTOR COVER

(37) in place and remove the cover.

2. Uncoil wiring harness and run wires through the

RIGHT UPRIGHT (7).

3. Use 5 BOLTS (65) and 5 LOCK WASHERS (79)

to attach the RIGHT UPRIGHT (7) to the MAIN

FRAME (1). Do not pinch wires. Do not tighten

before putting the console on.

4. Use 5 BOLTS (65) and 5 LOCK WASHERS (79)

to attach the LEFT UPRIGHT (8) to the MAIN

FRAME (1). Do not tighten before putting the

console on.

www.spirittness.com

CT900 STEP TWO

HARDWARE FOR STEP 2

PART TYPE DESCRIPTION QTY

63 BOLT M10XP1.5X 35L 6

74 FLAT WASHER Ø3/8"X Ø25X3T 6

79 LOCK WASHER Ø10 6

1. Install MAIN PANEL (3) onto the uprights using 6

BOLTS (63), 6 LOCK WASHERS (79) and 6 FLAT

WASHERS (74).

2. Run the wiring harness through the MAIN PANEL

(3) as shown in the illustration.

3. Tighten all bolts and washers on both uprights

(7 and 8) from previous step.

Spirit Fitness

CT900 STEP THREE

HARDWARE FOR STEP 3

PART TYPE DESCRIPTION QTY

68 BOLT

M5XP0.8X12L

1. Wires should be away from the console mounting

bracket.

2. Install the CONSOLE (54) using 4 BOLTS (68).

3. Connect wiring harness to CONSOLE (54).

4. Attach CONSOLE BRACKET COVER (49) to MAIN

PANEL using 4 BOLTS (68).

www.spirittness.com

CT900 STEP FOUR

HARDWARE FOR STEP 4

PART TYPE DESCRIPTION QTY

68 SCREW M5XP0.8X12L 4

69 SCREW M5XP0.8X25L 2

75 FLAT WASHER Ø5.5XØ19X1.5T 4

83 SCREW Ø3.5X12L 18

1. Attach LEFT OUTER HANDRAIL COVER (48) to

MAIN PANEL using 2 SCREWS (83) and 2 FLAT

WASHERS (75).

Spirit Fitness

CT900 STEP FOUR

2. Attach LEFT INNER HANDRAIL COVER (47) to MAIN

PANEL using 5 SCREWS (83).

3. Attach LEFT LOWER UPRIGHT COVER (40) to MAIN

FRAME (1) using 2 SCREWS (83), 2 FLAT WASHERS

(75), and 1 long SCREW (69).

4. Attach LEFT END CAP (42) to MAIN FRAME (1) using

2 SCREWS (68).

5. Repeat to install right side covers (45, 46, 39, 41).

6. Reinstall the MOTOR COVER (37) using the bolts

removed in Step 1.

www.spirittness.com

CT900 CONSOLE OPERATION

Spirit Fitness

www.spirittness.com

POWER

Power the treadmill on by plugging it into an appropriate wall outlet, then turn on the power switch located

at the front of the treadmill below the motor hood. Ensure that the safety key is installed, as the treadmill will

not power on without it.

When the power switch is turned on the treadmill console will take around 10 seconds to power on. The

console will then enter idle mode, which is the starting point for operation.

C-SAFE FEATURE

Your console is equipped with a C-SAFE feature. The Power (POWER) port can be

used for powering a remote controlled audio-visual system by connecting a cable

from the remote to the Power port at the back of the console. The Communication

port (COMM) can be used to interact with tness software applications.

Spirit Fitness

QUICK START

Press any key to wake display up if not already on.

• Press any key to wake display up if not already on.

• Press the Start key to begin belt movement at 0.5 mph then adjust to the desired speed using the Speed +/–

keys, or by typing the desired speed on the numeric keypad. Once setting desired is selected press Enter.

• To stop the treadbelt press and release Stop key.

PAUSE/STOP/RESET

When the treadmill is running the pause feature may be utilized by pressing the red Stop key once. This

will slowly decelerate the treadbelt to a stop. The incline will go to zero percent. The Time, Distance and

Calorie readings will hold while the unit is in the pause mode. After 5 minutes the display will reset and

return to the start-up screen.

• To resume your exercise when in Pause mode, press the Start key. The speed and incline will return to their

previous settings.

• Pressing the Stop key twice will end the program and a workout summary will be displayed. If the Stop

button is pressed a third time, the console will return to the idle mode (start-up screen).

• If the Stop button is held down for more than three seconds the console will reset.

• When you are setting data, such as age and time, for a program pressing the Stop key will allow you to go

back one step for each key press.

www.spirittness.com

INCLINE

Incline may be adjusted any time after the belt starts moving.

• Press and hold the adjustment Incline +/– keys to achieve desired level of incline.

• The display will indicate incline numbers as percent of grade (the same as grade of a road) as adjustments are made.

DOT MATRIX CENTER DISPLAY

Ten rows of dots indicate each level of a workout in manual mode. The dots are only to show an approximate

level (speed/incline) of effort. They do not necessarily indicate a specic value, only an approximate percent

to compare levels of intensity. In Manual Operation the Speed / Incline dot matrix window will build a prole

“picture” as values are changed during a workout. There are twenty-four columns, indicating time. The 24

columns are divided into 1/24th of the total time of the program. When the time is counting up from zero

(as in quick start) each column represents 1 minute.

Spirit Fitness

1/4 MILE TRACK

The 1/4-mile track (0.4 km) and lap counter are located to the left of the dot matrix window. The ashing

dot indicates your progress. In the center of the track there is a lap counter for reference.

HEART RATE FEATURE

The Pulse (Heart Rate) window will display your current heart rate in beats per minute during the workout.

You must use both left and right stainless steel sensors to pick up your pulse. Pulse values are displayed any

time the computer is receiving a Grip Pulse signal. You may use the Grip Pulse feature while in Heart Rate

Control. The CT900 will also pick up wireless heart rate transmitters that are Polar compatible, including

coded transmissions.

HEART RATE BAR GRAPH

Displays a graphical representation of your heart rate as a percentage of your estimated maximum heart

rate. When you enter your age during programming, the console will calculate your maximum heart rate

then light up the graph to show the percent of estimated maximum heart rate you are currently achieving.

MESSAGE WINDOW DISPLAY

Displays messages that help guide you through the programming process. During a program the message

window displays your workout data.

Page is loading ...

Spirit CT900 Owner's manual

Brand: Spirit

Model: CT900

Category: Fitness, gymnastics & weight training

Type: Owner's manual

Download PDF

report

Spirit CT900 Owner's manual

Spirit CT900 Owner's manual

Related papers

Other documents