Episode ES-SUB-TRP8-300-BLK Owner's manual

Episode
Brand
Episode
Model
ES-SUB-TRP8-300-BLK
Category
Subwoofers
Type
Owner's manual

This manual is also suitable for

Episode ES-SUB-TRP8-300-BLK is a powered subwoofer designed to reinforce bass in various audio systems. It features a BASH® hybrid amplifier technology, maximizing performance while generating little heat. It has a high-gloss furniture-quality cabinet that provides rigidity and sound clarity. The rear-mounted low-pass crossover adjustment and switchable phase control (0 or 180 degrees) ensure optimal system integration. The subwoofer offers three power mode options: 'On', 'Off', and 'Auto' for automatic power control.

Episode ES-SUB-TRP8-300-BLK is a powered subwoofer designed to reinforce bass in various audio systems. It features a BASH® hybrid amplifier technology, maximizing performance while generating little heat. It has a high-gloss furniture-quality cabinet that provides rigidity and sound clarity. The rear-mounted low-pass crossover adjustment and switchable phase control (0 or 180 degrees) ensure optimal system integration. The subwoofer offers three power mode options: 'On', 'Off', and 'Auto' for automatic power control.

Triple 8 and 10 in.
Powered Subwoofers
OWNER’S MANUAL
ES-SUB-TRP8-300-BLK ES-SUB-TRP10-500-BLK
pg.2
ES-SUB-TRP Installation and Users Manual
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of re or electric shock, do not expose this apparatus in or near rain or moisture.
1. Read and keep these instructions for future reference.
2. Do not use this apparatus near water.
3. Clean only with a dry cloth.
4. Do not block any ventilation openings. Install according to manufacturer’s instructions.
5. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus
(including ampliers) that produce heat.
6. Do not override the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades -
one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade
or the third prong is provided for your safety. If the provided plug does not t into your outlet, consult an
electrician for replacement of the obsolete outlet.
7. Protect the power cord from being walked on or pinched particularly at plug, convenience receptacles, and
the point where it exits from the apparatus.
8. Only use attachments/accessories specied by the manufacturer.
9. Use only with a cart, stand, tripod, bracket or table specied by the manufacturer,
or sold with the apparatus. When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
10. Unplug this apparatus during lightning storms or when unused for long periods of time.
11. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged
in any way, such as when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
12. To completely disconnect this equipment from the AC mains, disconnect the power supply cord plug from
the AC receptacle
13. This is CLASS II apparatus with double insulation, and no protective earth provided.
14. Do not expose this equipment to dripping or splashing and ensure that no objects lled with liquids, such as
vases, are placed on the equipment.
15. To completely disconnect this equipment from the ac mains, disconnect the power supply cord plug from the ac
receptacle.
16. The main plug of the power supply cord shall remain readily operable.
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS
The lightning ash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of
uninsulated dangerous voltage within the product’s enclosure
that may be of sufcient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating
and maintenance (servicing) instructions in the literature
accompanying the appliance.
CAUTION
CAUTION: TO REDUCE THE RISK
OF ELECTRICAL SHOCK, DO
NOT REMOVE COVER. NO USER
SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
© 2012 Episode
ES-SUB-TRP Installation and Users Manual
pg.3
WELCOME TO EPISODE
®
Episode
®
is one of the most highly-regarded brands of speakers available today. We appreciate your business
and we stand committed to providing our customers with the highest degree of quality and service in the industry.
Episode
®
subwoofers are a superb choice for bass reinforcement of almost every type of audio system. They have
been designed with advanced technology components that accurately reproduce low frequencies in all types of music
and movies. For optimum system performance, we recommend pairing them with our acclaimed Episode
®
loudspeakers.
FEATURES
>>WORLD-CLASS BASH
®
HYBRID AMPLIFIER TECHNOLOGY
Incorporates the latest BASH
®
amplier technology to maximize performance while generating little heat. In standby mode, the
subwoofer consumes less than 0.5 watts making it one of the “greenest” solutions available.
>>HIGH-GLOSS CABINET
Attractive furniture-quality cabinet provides the ultimate in rigidity and sound clarity.
>>TUNED SYSTEM PERFORMANCE
Offers rear-mounted, low-pass crossover adjustment and a switchable phase control (0 or 180 degrees) to ensure optimal system
integration, giving a seamless blend for an unbelievable music and movie experience.
>>SIGNAL-SENSING FOR AUTOMATIC POWER CONTROL
There are three power mode options with an Episode
®
powered subwoofer: ‘On’, ‘Off’ and ‘Auto’. When the ‘Auto’ position is
selected, the subwoofer will automatically switch to a power-saving standby mode until an input signal is detected. Power will
turn on whenever a minimal amount of signal is detected on the RCA jacks, and off again when no signal is present for approximately
15 minutes.
>>GOLD-PLATED INPUTS
Features stereo RCA line-level inputs for many two-channel applications. For home theater use, the right RCA unbalanced input
also serves as an LFE (Low Frequency Effects) input for a direct connection from the receiver or processor. An XLR balanced input
is provided for clean accurate audio from receivers or processors with balanced LFE outputs. For added versatility, there are also
gold-plated, ve-way binding-post inputs and outputs for speaker-level connections.
pg.4
ES-SUB-TRP Installation and Users Manual
Center
Left
Right
Sub
Right
Rear
Right
Side
Left
Side
Left
Rear
INSTALLATION
PLACING YOUR EPISODE
®
SUBWOOFER
Subwoofer placement can have an effect on the performance that
you receive. All rooms are different, but the strongest output will
likely occur if the subwoofer is placed in a corner of the room on
the same wall as the front channel speakers. This is known as the
boundary effect and will emphasize certain bass frequencies while
canceling others.
Some listeners will nd this to be the best sounding result, while
others may nd it overly “boomy” or muddy. Experiment with the
placement options available to you and follow the ne tuning
instructions that follow in the “Installation” section of this manual.
Note that due to the Triple Woofer design, it is recommended that
the subwoofer is placed at a 45° angle at least 12” from the corner.
For ultimate exibility in placement, use the Episode
®
Wireless
Subwoofer Transmission Kit.
© 2012 Episode
ES-SUB-TRP Installation and Users Manual
pg.5
SUBWOOFER CONTROLS
Your Episode® Subwoofer is suited to match nearly every home theater or music application:
1
HIGH LEVEL
IN
LOW LEVEL
CROSSOVER
R
UTILISER UN FUSIBLE DE RECHANGE
D E M E M E T Y P E E T CALI BRE.
ATTENTION:
FOR CONTINUED PRO TECTION AGAINST
RISK OF FIRE, REPLACE ONLY WITH
SAM TYPE FUSE AND RATING.
CAUTION:
E
TRI GGER
AUDIO
SENSE
TRIGGER
MODE
ALWAYS ON
TRIGGER IN
HIGH LEVEL
OUT
IN
RI GH T
LEFT
LEFT
RI GH T
OUT
PHA SE
180
0
POWER
BALANCED
IN
OUT
MADE IN CHINA
ES- SUB- TRP8 - 30 0
MIN
VOLUME
MAX
-
-
+ +
100-120V/220-240V
~ 50/60Hz 3.15A
T3.15AL250V
40Hz
LFE
120Hz
160Hz80Hz
ES-SUB-TRP8-300
2
3
4
HIGH LEVEL
IN
LOW LEVEL
LFE
T5AL250V
120V
60Hz 5A
CROSSOVER
40Hz
120Hz
TRIGGER
R
UTILISER UN FUSIBLE DE RECHANGE
D E MEME TYPE E T CAL IBRE.
ATTENTION:
FOR CONTINUED PROTECTION AGAINST
RISK OF FIRE, REPLACE ONLY WITH
SAM TYPE FUSE AND RATING.
CAUTION:
E
PHA SE
180
TRI GGER
0
AUDIO
SENSE
TRIGGER MODE
ALWAYS
ON
IN
HIGH LEVEL
OUT
IN
RI GH T
LEFT
LEFT
RI GH T
OUT
VARIABLE
POWER
BALANCED
IN
OUT
MADE IN CHINA
220-240V
50/60Hz 5A
ES-SUB-TRP10-500
MIN
VOLUME
MAX
ES-SUB-TRP10-500
1
2
4
5
3
ES-SUB-TRP8-300
1. VOLUME: Controls the overall output level of the subwoofer.
2. CROSSOVER: Sets the low-pass crossover frequency from
40 Hz to 200Hz (LFE).
3. PHASE: Selects the subwoofer’s phase response from 0 to 180°.
(See FINE TUNING on pg. 9)
5. TRIGGER MODE: Sets the subwoofer’s power mode:
Always On – Always Powered On
Trigger – Turns on when +12V is received at Trigger input
Audio Sense - Turns on when a minimal amount of audio signal is received
at the audio inputs
ES-SUB-TRP10-500
1. VOLUME: Controls the overall output level of the subwoofer.
2. CROSSOVER: Sets the low-pass crossover frequency from 40 Hz to 120Hz.
3. CROSSOVER MODE: Sets the crossover mode from variable to LFE for
home theater applications using an A/V receiver with a subwoofer output.
When LFE is selected, the crossover is set to 120Hz.
4. PHASE: Selects the subwoofer’s phase response from 0 to 180°.
(See FINE TUNING on pg. 9)
5. TRIGGER MODE: Sets the subwoofer’s power mode:
Always On – Always Powered On
Trigger – Turns on when +12V is received at Trigger input
Audio Sense - Turns on when a minimal amount of audio signal is received at
the audio inputs
pg.6
ES-SUB-TRP Installation and Users Manual
GETTING CONNECTED
Episode
®
Powered Subwoofers are among the most exible on the market today and can be congured for use in many different applications,
as shown in the gures below.
• For line level connections, use high-quality RCA cables that feature low impedance, shielding and high-quality connectors.
• Use two-conductor loudspeaker wire for high level connections to the subwoofer and to any satellite loudspeakers that may be connected
as well.
- DO NOT connect wiring to both sets of inputs simultaneously. Example – If using loudspeaker level inputs, DO NOT connect an
RCA cable to the subwoofer at the same time.
LOW-LEVEL INPUTS
ES-SUB-TRP8-300
Filename: TRP8_300 Panel Si l k ReE .ai
1 Color: PANTONE COOL GRAY 6M
Indigo P/ N: SLK2938
Rev. E
HIGH LEVEL
IN
LOW LEVEL
CROSSOVER
R
ATTENTION:
CAUTION:
TRIGGER
SIGNAL
SENSE
TRIGGER
MODE
ALWAYS ON
TRIGGER IN
HIGH LEVEL
OUT
RIGHT
LEFT
LEFT
RIGHT
OUT
PHASE
180
0
POWER
BALANCED
IN
OUT
MADE IN CHINA
ES-SUB-TRP8-300
MIN
VOLUME
MAX
-
-
+ +
100-120V/220-240V
~ 50/60Hz 3.15A
T3.15AL250V
40Hz
LFE
120Hz
160Hz80Hz
FOR CONTINUED PROTECTION AGAINST
RISK OF FIRE, REPLACE ONLY WITH
SAME TYPE FUSE AND RATING.
UTILISER UN FUSIBLE DE RECHANGE
DE MEM E TYPE ET CALIBRE .
IN
LFE
AV Receiver/Processor
LS
RS
SUB
CEN
L
R
Switched
Outlet
+12V Trigger
Out
HIGH LEV EL
IN
LOW LEVEL
LFE
T5AL250V
120V
60Hz 5A
CRO SSOVER
40Hz
120Hz
TRIGGER
R
UTILISER UN FUSIBLE DE RECHANGE
D E MEME TYPE E T CALIBRE.
ATTENTION:
FOR CONTINUED PROTECTION AGAINST
RISK OF FIRE, REPLACE ONLY WITH
SAM TYPE FUSE AND RATING.
CAUTION:
E
PHASE
180
TRIGGER
0
AUDIO
SENSE
TRIGGER MODE
ALWAYS
ON
IN
HIGH LEV EL
OUT
IN
RI GH T
LEF T
LEF T
RI GH T
OUT
VARIABLE
POWER
BALANCED
IN
OUT
MADE IN CHI NA
220-240V
50/60Hz 5A
ES-SUB-TRP10-500
MIN
VOLUME
MAX
Sub Balanced Out
Loop to
Additional Subs
Loop to
Additional Subs
Left & Right
Preamp Out
or LFE Sub
Out
or Balanced
LFE
ES-SUB-TRP10-500
AV Receiver/Processor
LS
RS
SUB
CEN
L
R
Switched
Outlet
+12V Trigger
Out
HIGH LEV EL
IN
LOW LEVEL
LFE
T5AL250V
120V
60Hz 5A
CRO SSOV ER
40Hz
120Hz
TRIGGER
R
UTILISER UN FUSIBLE DE RECHANGE
D E MEME TYPE E T CALIBRE.
ATTENTION:
FOR CONTINUED PROTECTION AGAINST
RISK OF FIRE, REPLACE ONLY WITH
SAM TYPE FUSE AND RATING.
CAUTION:
E
PHASE
180
TRIGGER
0
AUDIO
SENSE
TRIGGER MODE
ALWAYS
ON
IN
HIGH LEV EL
OUT
IN
RI GH T
LEF T
LEF T
RI GH T
OUT
VARIABLE
POWER
BALANCED
IN
OUT
MADE IN CH INA
220-240V
50/60Hz 5A
ES-SUB-TRP10-500
MIN
VOLUM E
MAX
Sub Balanced Out
Loop to
Additional Subs
Loop to
Additional Subs
Left & Right
Preamp Out
or LFE Sub
Out
or Balanced
LFE
R
Filename: SLK2863-K.ai
1 Color: PANTONE COOL GRAY 6M
Indigo P/ N: SLK2863
Rev. K
ES-SUB-TRP10-500
MADE IN CHINA
T5AL250V
120V
60Hz 5A
220 - 240V
50/60Hz 5A
RIGHT
LEFT
HIGH LEVEL
OUT
HIGH LEVEL
IN
LOW LEVEL
TRIGGER
SIGNAL
SENSE
TRIGGER MODE
ALWAYS
ON
LEFT
RIGHT
OUT
POWER
PHASE
180
0
OUT
LFE
120Hz
40Hz
CROSSOVER
VARIABLE
MIN
VOLUME
MAX
TRIGGER
IN
BALANCED
IN
CAUTION:
FOR CONTINUED PROTECTION AGAINST
RISK OF FIRE, REPLACE ONLY WITH
SAME TYPE FUSE AND RATING.
ATTENTI ON:
UTILISER UN FUSIBLE DE RECHANGE
DE M E ME TYPE ET CALIBRE.
IN
LFE
ES-SUB-TRP8-300
ES-SUB-TRP10-500
© 2012 Episode
ES-SUB-TRP Installation and Users Manual
pg.7
HIGH-LEVEL INPUTS
Filename: TRP8_300 Panel Si l k ReE .ai
1 Color: PANTONE COOL GRAY 6M
Indigo P/ N: SLK2938
Rev. E
HIGH LEVEL
IN
LOW LEVEL
CROSSOVER
R
ATTENTION:
CAUTION:
TRIGGER
SIGNAL
SENSE
TRIGGER
MODE
ALWAYS ON
TRIGGER IN
HIGH LEVEL
OUT
RIGHT
LEFT
LEFT
RIGHT
OUT
PHASE
180
0
POWER
BALANCED
IN
OUT
MADE IN CHINA
ES-SUB-TRP8-300
MIN
VOLUME
MAX
-
-
+ +
100-120V/220-240V
~ 50/60Hz 3.15A
T3.15AL250V
40Hz
LFE
120Hz
160Hz80Hz
FOR CONTINUED PROTECTION AGAINST
RISK OF FIRE, REPLACE ONLY WITH
SAME TYPE FUSE AND RATING.
UTILISER UN FUSIBLE DE RECHANGE
DE MEME TYPE ET CALIBRE.
IN
LFE
ES-SUB-TRP8-300
AV Receiver/Processor
Switched
Outlet
+12V Trigger
Out
HIGH LEV EL
IN
LOW LEVEL
LFE
T5AL250V
120V
60Hz 5A
CRO SSOVER
40Hz
120Hz
TRIGGER
R
UTILISER UN FUSIBLE DE RECHANGE
D E MEME TYPE E T CALIBRE.
ATTENTION:
FOR CONTINUED PROTECTION AGAINST
RISK OF FIRE, REPLACE ONLY WITH
SAM TYPE FUSE AND R ATING.
CAUTION:
E
PHASE
180
TRIGGER
0
AUDIO
SENSE
TRIGGER MODE
ALWAYS
ON
IN
HIGH LEV EL
OUT
IN
RI GH T
LEF T
LEF T
RI GH T
OUT
VARIABLE
POWER
BALANCED
IN
OUT
MADE IN CHI NA
220-240V
50/60Hz 5A
ES-SUB-TRP10-500
MIN
VOLUME
MAX
Sub Balanced Out
Left Right
+
-
HIGH LEVEL
IN
LOW LEVEL
LFE
T5AL250V
120V
60Hz 5A
CROSSOVER
40Hz
120Hz
TRIGGER
R
UTILISER UN FUSIBLE DE RECHANGE
D E MEME TYPE ET CALIBRE.
ATTENTION:
FOR CONTINUED PROTECTION AGAINST
RISK OF FIRE, REPLACE ONLY WITH
SAM TYPE FUSE AND RATING.
CAUTION:
E
PHA SE
180
TRIGGER
0
AUDIO
SENSE
TRIGGER MODE
ALWAYS
ON
IN
HIGH LEVEL
OUT
IN
RI GH T
LEFT
LEFT
RI GH T
OUT
VARIABLE
POWER
BALANCED
IN
OUT
MADE IN CHI NA
220-240V
50/60Hz 5A
ES-SUB-TRP10-500
MIN
VOLUME
MAX
ES-SUB-TRP10-500
AV Receiver/Processor
Switched
Outlet
+12V Trigger
Out
Sub Balanced Out
Left Right
+
-
ES-SUB-TRP8-300
ES-SUB-TRP10-500
pg.8
ES-SUB-TRP Installation and Users Manual
12V DC TRIGGER
The TRP8 and TRP10 are equipped with a 12V trigger input to turn the amplier off, reducing power consumption when not in use. When
this input receives a 12V signal, the amplier will turn ON; when the signal goes away, the amplier will turn OFF.
• Connect the 12V trigger output of the AV receiver to the 12V trigger input of the EA-AMP-SUB-1D-110 using a high quality
3.5mm (1/8”) mono cable.
• If the receiver does not have a 12V trigger output, using a 12V power supply plugged into a switched outlet on the receiver
provides the same functionality.
HIGH L EVEL
IN
LOW LEVEL
LFE
T5AL250V
120V
60Hz 5A
CROSSOVER
40Hz
120Hz
TRIGGER
R
UTILISER UN FUSIBLE DE RECHANGE
D E MEME TYPE E T CALIBRE.
ATTENTION:
FOR CONTINUED PROTECTION AGAINST
RISK OF FIRE, REPLACE ONLY WITH
SAM TYPE FUSE AND RATING.
CAUTION:
E
PHA SE
180
TRIGGER
0
AUDIO
SENSE
TRIGGER MODE
ALWAYS
ON
IN
HIGH LEVEL
OUT
IN
RI GHT
LEFT
LEFT
RI GHT
OUT
VARIABLE
POWER
BALANCED
IN
OUT
MADE IN CHI NA
220-240V
50/60Hz 5A
ES-SUB-TRP10-500
MIN
VOLUME
MAX
ES-SUB-TRP10-500
AV Receiver/Processor
LS
RS
SUB
CEN
LF
RF
Switched
Outlet
+12V Trigger
Out
HIGH LEV EL
IN
LOW LEVEL
LFE
T5AL250V
120V
60Hz 5A
CROSSOVER
40Hz
120Hz
TRIGGER
R
UTILISER UN FUSIBLE DE RECHANGE
D E MEME TYPE E T CALIBRE.
ATTENTION:
FOR CONTINUED PROTECTION AGAINST
RISK OF FIRE, REPLACE ONLY WITH
SAM TYPE FUSE AND RATING.
CAUTION:
E
PHASE
180
TRIGGER
0
AUDIO
SENSE
TRIGGER MODE
ALWAYS
ON
IN
HIGH LEV EL
OUT
IN
RI GH T
LEF T
LEF T
RI GH T
OUT
VARIABLE
POWER
BALANCED
IN
OUT
MADE IN CH INA
220-240V
50/60Hz 5A
ES-SUB-TRP10-500
MIN
VOLUME
MAX
Sub Balanced Out
or
Filename: TRP8_300 Panel Si l k ReE .ai
1 Color: PANTONECOOL GRAY 6M
Indigo P/ N: SLK2938
Rev. E
HIGH LEVEL
IN
LOW LEVEL
CROSSOVER
R
ATTENTION:
CAUTION:
TRIGGER
SIGNAL
SENSE
TRIGGER
MODE
ALWAYS ON
TRIGGER IN
HIGH LEVEL
OUT
RIGHT
LEFT
LEFT
RIGHT
OUT
PHASE
180
0
POWER
BALANCED
IN
OUT
MADE IN CHINA
ES-SUB-TRP8-300
MIN
VOLUME
MAX
-
-
+ +
100-120V/220-240V
~ 50/60Hz 3.15A
T3.15AL250V
40Hz
LFE
120Hz
160Hz80Hz
FOR CONTINUED PROTECTION AGAINST
RISK OF FIRE, REPLACE ONLY WITH
SAME TYPE FUSE AND RATING.
UTILISER UN FUSIBLE DE RECHANGE
DE MEME TYPE ET CALIBRE.
IN
LFE
ES-SUB-TRP8-300
AV Receiver/Processor
LS
RS
SUB
CEN
LF
RF
Switched
Outlet
+12V Trigger
Out
HIGH LEV EL
IN
LOW LEVEL
LFE
T5AL250V
120V
60Hz 5A
CROSSOVER
40Hz
120Hz
TRIGGER
R
UTILISER UN FUSIBLE DE RECHANGE
D E MEME TYPE E T CALIBRE.
ATTENTION:
FOR CONTINUED PROTECTION AGAINST
RISK OF FIRE, REPLACE ONLY WITH
SAM TYPE FUSE AND RATING.
CAUTION:
E
PHASE
180
TRIGGER
0
AUDIO
SENSE
TRIGGER MODE
ALWAYS
ON
IN
HIGH LEV EL
OUT
IN
RI GH T
LEF T
LEF T
RI GH T
OUT
VARIABLE
POWER
BALANCED
IN
OUT
MADE IN CH INA
220-240V
50/60Hz 5A
ES-SUB-TRP10-500
MIN
VOLUME
MAX
Sub Balanced Out
or
12V DC
(Tip)
GND
(Sleeve)
12V DC Trigger PIN Conguration
© 2012 Episode
ES-SUB-TRP Installation and Users Manual
pg.9
FINE TUNING
After making all the connections and calibrating the sub, set up your Episode
®
subwoofer using the following steps:
Note: When using an AV receiver and the LFE input, set the subwoofer calibration level to the factory setting before performing the
following procedure. After making the below adjustments, calibrate the system via the AV receiver’s setup procedure.
1. Ensure that the subwoofer is plugged in.
2. Set the following controls and switches to positions that will enable tuning for maximum performance.
a. VOLUME knob set to 50%, or 12 o’clock
b. CROSSOVER knob set to 120 Hz or 5 o’clock
c. PHASE switch set to 0º
During initial setup, it may be helpful to set the MODE switch to the ‘ON’ position. Once calibration is complete, switch it to ‘AUTO’
to enable the automatic power-saving mode.
3. Play a movie scene or music track and set the system volume to an average level. Listen to the bass level from your favorite
listening position. Adjust the VOLUME control as desired.
4. If deeper bass is desired, adjust the CROSSOVER control toward the lower frequencies. Experiment with different frequency
settings until you nd one that sounds best.
NOTE: When using the LFE input, set to LFE and make any crossover adjustments in the preamplier or receiver crossover
settings.
5. Continue listening to your favorite music and movie sources using the settings chosen for volume and crossover.
Now, try experimenting with the PHASE switch until you nd the best setting for the installation. Depending on your subwoofer’s
placement, the bass may sound louder or deeper when the phase has been optimized. In some cases, adjusting phase will make
no discernible difference.
INSTALLING AND REMOVING THE GRILLS
To remove the grills, gently pull the tabs on the outer edge of the grill frame to separate the grill from the bafe of the subwoofer. To
install the grill, start in one top corner and gently press the grill frame in around the front bafe, pushing it in at each of the remaining
three recessed holes.
CLEANING
Use a soft cloth or paper towel to clean the cabinet. The grill is best cleaned by brushing it off with a lint-free cloth.
SPECIFICATIONS
TROUBLESHOOTING
Episode
®
speakers are designed to function trouble-free. Most problems that occur are due to simple issues. If you have trouble,
please check the list of simple xes below. If the problem persists, contact Episode
®
Customer Service at 1.866.838.5052
NO SOUND
• Verify that there is audio coming from the source selected. Select another source if necessary.
• Ensure that any A/V receivers are turned on and connected properly.
• Check cable connections at each subwoofer not producing sound for good contact.
• Ensure the subwoofer volume is turned up to a reasonable level. The control is located on the rear panel.
• During troubleshooting, it may be useful to temporarily set the MODE switch to ‘ON’ to ensure signal-sensing power
mode is disabled.
WARRANTY
10/2-Year Limited Warranty
Episode
®
Subwoofers have a 2-Year Warranty on the amplier and a 10-Year Warranty on the woofer and box. This warranty
includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions
of use. This warranty shall not apply to products which have been abused, modied or disassembled. Products to be repaired
under this warranty must be returned to SnapAV or a designated service center with prior notication and an assigned return
authorization number (RA).
CONTACTING TECHNICAL SUPPORT
Phone: (866) 838-5052
Email: Techsupport@snapav.com
© 2012 Episode
120229-940
ES-SUB-TRP8-300 ES-SUB-TRP10-500
Driver (1) 8” Woven Fiberglass
(2) 8” Passive Radiators
(1) 10” Woven Fiberglass
(2) 10” Passive Radiators
Amplier 300 watts RMS @ 0.2% THD 500 watts RMS @ 0.2% THD
Signal to Noise Ratio 90 dB A-weighted 90 dB A-weighted
Input Power 100-120V/220-240V, ~50/60Hz, 3.15A 100-120V/220-240V, ~50/60Hz, 5A
Frequency Response 30 Hz to 200 Hz 30 Hz to 180 Hz
Dimensions (H) 11.81 in. (300 mm) x (W) 12.8 in.
(325 mm) x (D)12.8 in. (325 mm)
(H) 13.7 in. (347 mm) x (W) 14.9 in.
(379 mm) x (D)14.75 in. (374.5 mm)
Weight 14.5 lbs 21.4 lbs
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

Episode ES-SUB-TRP8-300-BLK Owner's manual

Episode
Brand
Episode
Model
ES-SUB-TRP8-300-BLK
Category
Subwoofers
Type
Owner's manual
This manual is also suitable for

Episode ES-SUB-TRP8-300-BLK is a powered subwoofer designed to reinforce bass in various audio systems. It features a BASH® hybrid amplifier technology, maximizing performance while generating little heat. It has a high-gloss furniture-quality cabinet that provides rigidity and sound clarity. The rear-mounted low-pass crossover adjustment and switchable phase control (0 or 180 degrees) ensure optimal system integration. The subwoofer offers three power mode options: 'On', 'Off', and 'Auto' for automatic power control.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents