3370a Instructions
SAFETY PRECAUTIONS
1. Always wear safety eye protection.
2. DO NOT point the laser toward the eye of any person or animal.
3. Always wear clothing which will protect you from extreme temperatures (i.e. – gloves)
4. DO NOT attempt to verify the temperature reading by touching the object.
CHECKING TEMPERATURE
1. Point the barrel of the MicroTherm™ toward the object or surface area you wish to check. Press the
button under the LCD screen and observe the LCD screen. The temperature of the object or surface
area you are pointing at will be displayed numerically on the digital display.
2. To change units of temperature being measured, simply press the button under the LCD screen twice.
Both the number displayed and the symbol to the right of it will change to reflect the different
temperature unit selected.
3. To utilize the laser pointer function, simply press and hold button under the LCD screen. An intense
red light will then shoot out from the barrel of the MicroTherm™ toward whatever it is currently
aimed at. This function is very useful in helping to determine exactly which object or area is being
measured.
Note: The LCD will continue to display the last temperature recorded until it powers off. The unit will
power off automatically once you release the button. Backlight functions will continue to work until
the button is release.
WARRANTY AND SERVICING
LIMITED ONE YEAR WARRANTY
The Manufacturer warrants to the original purchaser that this unit is free of defects in materials and workmanship under normal
use and maintenance for a period of one (1) year from the date of original purchase.
If the unit fails within the one (1) year period, it will be repaired or replaced, at the Manufacturer’s option, at no charge, when
returned prepaid to the Service Center with Proof of Purchase. The sales receipt may be used for this purpose. Installation labor
is not covered under this warranty. All replacement parts, whether new or remanufactured, assume as their warranty period only
the remaining time of this warranty.
This warranty does not apply to damage caused by improper use, accident, abuse, improper voltage, service, fire, flood,
lightning, or other acts of God, or if the product was altered or repaired by anyone other than the Manufacturer’s Service Center.
The Manufacturer, under no circumstances shall be liable for any consequential damages for breach of any written warranty of
this unit. This warranty gives you specific legal rights, and you may also have rights, which vary from state to state. This manual
is copyrighted with all rights reserved. No portion of this document may be copied or reproduced by any means without the
express written permission of the Manufacturer. THIS WARRANTY IS NOT TRANSFERABLE. For service, send via U.P.S.(if
possible) prepaid to Manufacturer. Allow 3-4 weeks for service/repair.
SERVICE PROCEDURES
If you have any questions, require technical support or information on UPDATES and OPTIONAL ACCESSORIES, please
contact your local store,distributor or the Service Center.
USA & Canada:
(800) 544-4124 (6:00AM-6:00 PM, 7 days a week PST)
All others:(714) 241-6802 (6:00AM-6:00 PM, 7 days a week PST)
FAX:(714) 432-3979 (24 hr.)
Web:www.equus.com
Innova Electronics Corp.
17352 Von Karman Ave. Irvine, CA 92614
Page is loading ...
Page is loading ...
/
