LG DM5330 User manual

OWNER’S MANUAL

DVD MINI HI-FI SYSTEM

Please read this manual carefully before operating

your set and retain it for future reference.

DM5430 (DM5430, DMS5430V)

DM5330 (DM5330, DMS5330V)

DM5230 (DM5230, DMS5230V)

ENGLISH РУССКИЙ

FRANÇAIS

DM5330-AU_BUZBLLK_ENG.indd 1 2013-07-04  1:30:12

DM5330-AU_BUZBLLK_ENG.indd 2 2013-07-04  1:30:13

1 Getting Started

Getting Started 3

Getting Started

1

Safety Information

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR BACK) NO

USER-SERVICEABLE PARTS INSIDE REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

This lightning ash with

arrowhead symbol within an

equilateral triangle is intended to

alert the user to the presence of

uninsulated dangerous voltage

within the product’s enclosure that

may be of sucient magnitude to

constitute a risk of electric shock

to persons.

The exclamation point within an

equilateral triangle is intended

to alert the user to the presence

of important operating and

maintenance (servicing)

instructions in the literature

accompanying the product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK

HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN

OR MOISTURE.

WARNING: Do not install this equipment in a

conned space such as a book case or similar unit.

CAUTION: Do not block any ventilation openings.

Install in accordance with the manufacturer’s

instructions.

Slots and openings in the cabinet are provided for

ventilation and to ensure reliable operation of the

product and to protect it from over heating. The

openings shall be never be blocked by placing

the product on a bed, sofa, rug or other similar

surface. This product shall not be placed in a built-

in installation such as a bookcase or rack unless

proper ventilation is provided or the manufacturer’s

instruction has been adhered to.

CAUTION: This product employs a Laser System.

To ensure proper use of this product, please read

this owner’s manual carefully and retain it for future

reference. Shall the unit require maintenance,

contact an authorized service center.

Use of controls, adjustments or the performance of

procedures other than those specied herein may

result in hazardous radiation exposure.

To prevent direct exposure to laser beam, do not

try to open the enclosure.

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon

a dedicated circuit;

That is, a single outlet circuit which powers only

that appliance and has no additional outlets or

branch circuits. Check the specication page of this

owner’s manual to be certain. Do not overload wall

outlets. Overloaded wall outlets, loose or damaged

wall outlets, extension cords, frayed power cords, or

damaged or cracked wire insulation are dangerous.

Any of these conditions could result in electric

shock or re. Periodically examine the cord of your

appliance, and if its appearance indicates damage

or deterioration, unplug it, discontinue use of the

appliance, and have the cord replaced with an

exact replacement part by an authorized service

center. Protect the power cord from physical or

mechanical abuse, such as being twisted, kinked,

pinched, closed in a door, or walked upon. Pay

particular attention to plugs, wall outlets, and

the point where the cord exits the appliance. To

disconnect power from the mains, pull out the

mains cord plug. When installing the product,

ensure that the plug is easily accessible.

DM5330-AU_BUZBLLK_ENG.indd 3 2013-07-04  1:30:16

Getting Started4

Getting Started

1

Disposal of your old appliance

1. When this crossed-out wheeled bin

symbol is attached to a product it

means the product is covered by

the European Directive 2002/96/EC.

2. All electrical and electronic products

should be disposed of separately

from the municipal waste stream

via designated collection facilities

appointed by the government or

the local authorities.

3. The correct disposal of your

old appliance will help prevent

potential negative consequences

for the environment and human

health.

4. For more detailed information about

disposal of your old appliance,

please contact your city office,

waste disposal service or the shop

where you purchased the product.

Disposal of waste batteries/accumulators

1. When this crossed-out wheeled

bin symbol is attached to batteries/

accumulators of Your product

it means they are covered by

European Directive 2006/66/EC.

2. This symbol may be combined with

chemical symbols for mercury(Hg),

cadmium(Cd) or lead(Pb) if the

battery Contains more that 0.0005%

of mercury,0.002% of cadmium or

0.004% of lead.

3. All batteries/accumulators should

be disposed separately from

the municipal waste stream via

designated collection facilities

appointed by the government or

the local authorities.

4. The correct disposal of Your old

batteries/accumulators will help

to prevent potential negative

consequences for the environment,

animal and human health.

5. For more detailed information

about disposal of Your old batteries/

accumulators, please contact Your

city office, waste disposal service or

the shop where You purchased the

product.

DM5330-AU_BUZBLLK_ENG.indd 4 2013-07-04  1:30:17

Getting Started 5

Getting Started

1

This device is equipped with a portable battery or

accumulator.

Safety way to remove the battery or the

battery from the equipment: Remove the

old battery or battery pack, follow the steps

in reverse order than the assembly. To prevent

contamination of the environment and bring on

possible threat to human and animal health, the

old battery or the battery put it in the appropriate

container at designated collection points. Do

not dispose of batteries or battery together with

other waste. It is recommended that you use

local, free reimbursement systems batteries and

accumulators. The battery shall not be exposed to

excessive heat such as sunshine, re or the like.

CAUTION: The apparatus shall not be exposed to

water (dripping or splashing) and no objects lled

with liquids, such as vases, shall be placed on the

apparatus.

Notes on Copyrights

y

This product incorporates copyright protection

technology that is protected by U.S. patents

and other intellectual property rights. Use of

this copyright protection technology must be

authorized by Rovi, and is intended for home and

other limited viewing uses only unless otherwise

authorized by Rovi. Reverse engineering or

disassembly is prohibited.

y

Under the U.S. Copyright laws and Copyright

laws of other countries, unauthorized recording,

use, display, distribution, or revision of television

programs, videotapes, BD-ROM discs, DVDs, CDs

and other materials may subject you to civil and/

or criminal liability.

DM5330-AU_BUZBLLK_ENG.indd 5 2013-07-04  1:30:17

Table of Contents6

Table of Contents

1 Getting Started

3 Safety Information

8 Unique Features

8 Accessories

8 Introduction

8 – Playable Discs

8 – About the

& Symbol Display

9 – Symbol Used in this Manual

9 – Regional Codes

9 Playable file Requirement

9 – MP3/WMA music file requirement

9 – Compatible USB Devices

10 – USB device requirement

10 – Photo file requirement

10 – DivX file requirement

11 Remote control

12 Front panel

14 Rear panel

2 Connecting

15 Connecting to speakers

15 – Attaching the speakers to the unit

15 Antenna Connection

16 Connections to Your TV

16 – Video Connection

17 – Component Video Connection

17 Optional Equipment Connection

17 – AUX In Connection

18 – USB Connection

19 Adjust the Setup settings

19 – OSD Initial language settings -

Optional

19 – To display and exit the Setup Menu

3 System setting

20 – LANGUAGE

20 – DISPLAY

21 – AUDIO

21 – LOCK (Parental Control)

22 – OTHERS

DM5330-AU_BUZBLLK_ENG.indd 6 2013-07-04  1:30:17

Table of Contents 7

1

2

3

4

5

6

4 Operating

23 Basic Operations

23 – Disc/USB Operations

24 Other Operations

24 – Displaying Disc Information on-screen

24 – To display the DVD Menu

24 – To display the DVD title

24 – Selecting a subtitle language

24 – 1.5 times speed playback

25 – Starting play from selected

time

25 – Last Scene Memory

25 – Changing the character set to display

DivX® subtitle correctly - optional

25 – Creating your own program

25 – Viewing a PHOTO file

26 – Viewing a PHOTO file as a slide show

26 – Setting the Clock

26 – Using your player as an alarm clock

27 – Sleep Timer Setting

27 – Dimmer

27 – DEMO

27 – Turning off the sound temporarily

27 – Screen Saver

27 – System Select - Optional

27 – Displaying file information

(ID3 TAG)

28 – Using Microphone

28 – VOCAL FADER

29 Radio Operations

29 – Listening to the radio

29 – Presetting the Radio Stations

29 – Deleting all the saved stations

29 – Improving poor FM reception

30 Sound adjustment

30 – Setting the surround mode

30 – Setting the USER EQ

31 Advanced Operations

31 – Listening to music from your external

device

31 – Recording to USB

5 Troubleshooting

32 Troubleshooting

6 Appendix

33 Specifications

35 Maintenance

35 – Handling the Unit

35 – Notes on Discs

35 Trademarks and Licenses

36 Language Codes

37 Area Codes

DM5330-AU_BUZBLLK_ENG.indd 7 2013-07-04  1:30:18

Getting Started8

Getting Started

1

Unique Features

USB Direct Recording

Records music to your USB device.

Accessories

Please check and identify the supplied accessories.

AM antenna (1) FM antenna (1)

Remote control (1) Battery (1)

Introduction

Playable Discs

This unit plays DVD±R/RW and CD-R/RW that

contains audio titles, DivX, MP3, WMA and/or

JPEG les. Some DVD±RW/DVD±R or CD-RW/

CD-R cannot be played on this unit due to the

recording quality or physical condition of the disc,

or the characteristics of the recording device and

authoring software.

DVD-VIDEO (8 cm / 12 cm disc)

Discs such as movies that can be

purchased or rented.

DVD±R (8 cm / 12 cm disc)

Video mode and nalized only

DVD-RW (8 cm / 12 cm disc)

Video mode and nalized only

DVD+R: Video mode only

Supports the double layer disc also

DVD+RW (8 cm / 12 cm disc)

Video mode and nalized only

Audio CD: Music CDs or CD-R/CD-

RW in music CD format that can be

purchased.

About the

&

Symbol Display

“

&

” may appear on your TV display during

operation and indicates that the function explained

in this owner’s manual is not available on that disc.

DM5330-AU_BUZBLLK_ENG.indd 8 2013-07-04  1:30:21

Getting Started 9

Getting Started

1

Symbol Used in this Manual

DVD and nalized DVD±R/RW

r

DivX les

y

MP3/WMA les, Audio CDs

u

JPG les

i

Regional Codes

This unit has a regional code printed on the rear of

the unit. This unit can play only DVD discs labelled

same as the rear of the unit or “ALL”.

y

Most DVD discs have a globe with one or more

numbers in it clearly visible on the cover. This

number must match your unit’s regional code or

the disc cannot play.

y

If you try to play a DVD with a dierent regional

code from your unit, the message “Check

Regional Code” appears on the TV screen.

,

Note

Indicates special notes and operating features.

>

Caution

Indicates cautions for preventing possible damages

from abuse.

Playable file

Requirement

MP3/WMA music file

requirement

MP3/ WMA le compatibility with this unit is limited

as follows :

y

Sampling Frequency : 32 - 48 kHz (MP3), 32 - 48

kHz (WMA)

y

Bit rate : 32 - 320 kbps (MP3), 40 - 192 kbps

(WMA)

y

Maximum les : Under 999

y

File extensions : “.mp3”/ “.wma”

y

CD-ROM le format : ISO9660/ JOLIET

y

We recommend that you use “Easy-CD Creator”,

which creates an ISO 9660 le system.

y

You have to set the disc format option to

[Mastered] in order to make the discs compatible

with the LG players when formatting rewritable

discs. When setting the option to Live File

System, you cannot use it on LG players.

(Mastered/ Live File System : Disc format system

for Windows Vista)

Compatible USB Devices

y

MP3 Player : Flash type MP3 player.

y

USB Flash Drive : Devices that support USB2.0 or

USB1.1.

y

The USB function of this unit does not support

all USB devices.

DM5330-AU_BUZBLLK_ENG.indd 9 2013-07-04  1:30:22

Getting Started10

Getting Started

1

USB device requirement

y

Devices which require additional program

installation when you have connected it to a

computer, are not supported.

y

Do not extract the USB device while in operation.

y

For a large capacity USB, it may take longer than

a few minute to be searched.

y

To prevent data loss, back up all data.

y

If you use a USB extension cable or USB hub, the

USB device is not recognized.

y

Using NTFS le system is not supported. (Only

FAT(16/ 32) le system is supported.)

y

This unit is not supported when the total

number of les is 1 000 or more.

y

External HDD, Card readers, Locked devices, or

hard type USB devices are not supported.

y

USB port of the unit cannot be connected to PC.

The unit cannot be used as a storage device.

Photo file requirement

Photo le compatibility with this unit is limited as

follows :

y

Max pixel in width :

Normal : 5120 x 3840

Progressive JPEG : 2048 x 1536

y

Maximum les : Under 999

y

Some discs may not operate due to a dierent

recording format or the condition of disc.

y

File extensions : “.jpg”

y

CD-ROM le format : ISO9660 LEVEL 1/ JOLIET

DivX file requirement

DivX le compatibility with this unit is limited as

follows :

y

Available resolution:

up to 800 x 600 (W x H) pixels.

y

The le name of the DivX subtitle should be

entered 45 characters or less.

y

If there is a code impossible to express in the

DivX le, it may be displayed as a “ _ “ mark on

the display.

y

Frame rate : less than 30 fps.

y

If the video and audio structure of recorded

les are not interleaved, either video or audio is

output.

y

Playable DivX le : “.avi”, “.mpg”, “.mpeg”, “.divx”

y

Playable Subtitle format : SubRip (*.srt/ *.txt),

SAMI (*.smi), SubStation Alpha (*.ssa/ *.txt),

MicroDVD (*.sub/ *.txt), SubViewer 2.0 (*.sub/

*.txt), Vobsub (*.sub)

y

Playable Codec format :

“DIVX3.11”, “DIVX4”, “DIVX5”,

“MP4V3”, “3IVX”.

y

Playable Audio format : “AC3”, “PCM”, “MP3”, “WMA”.

y

Sampling frequency : between 32 to 48 kHz

(MP3), between 32 to 48 kHz (WMA)

y

Bit rate : between 32 to 320 kbps (MP3), 40 to

192 kbps (WMA)

y

For Discs formatted in Live le system, you can

not use it on this unit.

y

If the name of movie le is dierent from that of

the subtitle le, during playback of a DivX le,

subtitle may not be display.

y

If you play a DivX le dier from DivX spec, it

may not operate normally.

DM5330-AU_BUZBLLK_ENG.indd 10 2013-07-04  1:30:22

Getting Started 11

Getting Started

1

Remote

control

Battery Installation

Remove the battery cover on

the rear of the Remote Control,

and insert one (size AAA)

battery with

4

and

5

matched

correctly.

• • • • • •

a

• • • • •

FUNCTION : Selects the

function and input source.

SLEEP : Sets the system to turn

o automatically at a specied

time.

POWER (

1

) : Switches the unit

ON or OFF.

OPEN/CLOSE (

B

) : Opens and

closes the disc tray.

TITLE : If the current DVD

title has a menu, the title

menu appears on the screen.

Otherwise, the disc menu may

appear.

DISPLAY : Accesses On-Screen

Display.

MENU : Accesses the menu on a

DVD disc.

SETUP : Accesses or removes

setup menu.

• • • • • •

b

• • • • •

PRESET (

W/S

) : Selects

programme of Radio.

TUN. -/+(

A/D

) : Tunes in the

desired radio station.

W/S/A/D

(up/ down/ left/

right) : Used to navigate on-

screen displays.

ENTER (

b

) : Acknowledges

menu selection.

RETURN (

x

) : Moving back

wards in the menu.

REC (

X

) : Recording.

• • • • • •

c

• • • • •

STOP (

Z

) : Stops playback or

recording.

PLAY (

d

), MO./ST. : Starts

playback.

Selects Mono/ Stereo.

PAUSE/STEP (

M

) : Pauses

playback.

SKIP (

C/V

) : Goes to next

or previous chapter/ track/ le.

SCAN (

c/v

) : Searches

backward or forward.

D.SKIP : Chooses a desired disc.

MUTE : Mutes the sound.

VOL (+/-) (Volume) : Volume

control.

EQ (

$

) : You can choose sound

impressions.

LG EQ (

9

) : Select a Natural or

Local Specialization equalizer

eect by LG EQ.

• • • • • •

d

• • • • •

0 to 9 numerical buttons :

Selects numbered options in a

menu.

REPEAT/RANDOM : Selects a

play mode.

SUBTITLE (

]

) : During

playback, press SUBTITLE (

]

)

repeatedly to select a desired

subtitle language.

TV Control buttons : Controls

the TV. (LG TV only)

Controlling the TV.

You can control the sound

level, input source, and power

switching of LG TVs as well.

Hold POWER (TV) and press

PR/CH (+/–) button repeatedly

until the TV turns on or o.

PROG./MEMO. : Accesses

Program menu.

CLEAR : Removes a track

number on the Program List.

MIC VOL (+/ - ) : Adjusts

microphone volume.

ECHO VOL (+/ - ) : Adjusts echo

volume.

VOCAL FADER : You can enjoy

the function as karaoke, by

reducing singer vocal of music

in the various source.

DM5330-AU_BUZBLLK_ENG.indd 11 2013-07-04  1:30:24

Getting Started12

Getting Started

1

Front panel

DM5330-AU_BUZBLLK_ENG.indd 12 2013-07-04  1:30:25

Getting Started 13

Getting Started

1

a

Disc tray

b

1

/

!

STANDBY/ON

c

Display window

d

CLOCK

For setting the clock and checking the time.

e

TIMER

With the TIMER function you can turn USB, CD

play and TUNER reception on or o at a desired

time.

f

USER EQ

g

Selects DVD/CD function.

Selects TUNER function.

Selects USB function.

Selects AUX function.

h

SET

Conrms the settings. (TIMER/ CLOCK)

CD

M

Pauses.

PRESET (-)

TUNING (-)

DEMO In power o state to demonstrate the

function on display window. To cancel it, press

1

/

!

or this button again.

i

Headphone jack

j

USB connector

k

B

OPEN/CLOSE

l

DISC SKIP

Choose a desired disc.

m

EQ

You can choose xed sound impression.

n

BASS BLAST

Extreme Dynamic Sound System.

Reinforce the treble, bass and surround eect.

MP3 OPT.

Optimizes compressible MP3 les so that it

improves the bass sound.

o

REC.

p

LG EQ

You can choose xed sound impression.

q D

PRESET (+)

TUNING(+)

I

(STOP)

r

MIC VOL.

Adjust microphone volume.

s

MIC 1, 2

t

Volume control

DM5330-AU_BUZBLLK_ENG.indd 13 2013-07-04  1:30:26

Getting Started14

Getting Started

1

Rear panel

a

AUX IN connector

b

VIDEO OUT connector

c

ANTENNA (FM, AM)

d

COMPONENT VIDEO OUT (PROGRESSIVE SCAN) connector

e

POWER IN

f

SPEAKERS terminals

g

Cooling Fan (Except DM5230)

DM5330-AU_BUZBLLK_ENG.indd 14 2013-07-04  1:30:27

2 Connecting

Connecting 15

Connecting

2

Connecting to

speakers

Attaching the speakers to the

unit

To connect the cable to the unit, press each plastic

nger pad to open the connection terminals on the

unit. Insert the wire and release the nger pad.

Connect the black stripe of each wire to the

terminals marked - (minus) and the other end to

the terminals marked + (plus).

The speakers contain magnet parts, so color

irregularity may occur on the TV screen or PC

monitor screen. Please use the speakers far

away from either TV screen or PC monitor.

>

Caution

Antenna Connection

Connect the supplied FM/ AM antenna for listening

to the radio.

y

To prevent noise pickup, keep the AM Loop

antenna away from the unit and other

components.

y

Be sure to fully extend the FM wire antenna.

,

Note

DM5330-AU_BUZBLLK_ENG.indd 15 2013-07-04  1:30:29

Connecting16

Connecting

2

Connections to Your

TV

Make one of the following connections, depending

on the capabilities of your existing equipment.

y

Depending on your TV and other equipment

you wish to connect, there are various ways

you could connect the unit. Use only one of

the connections described in this manual.

y

Please refer to the manuals of your TV,

Stereo System or other devices as necessary

to make the best connections.

y

Make sure the unit is connected directly

to the TV. Tune the TV to the correct video

input channel.

y

Do not connect your unit via your VCR.

The image could be distorted by the copy

protection system.

,

Note

Video Connection

Connect the VIDEO OUT jack on the unit to the

video in jack on the TV using a video cable.

Yellow

TV

DM5330-AU_BUZBLLK_ENG.indd 16 2013-07-04  1:30:30

Connecting 17

Connecting

2

Component Video Connection

Connect the COMPONENT VIDEO OUT

(PROGRESSIVE SCAN) jacks on the unit to the

corresponding input jacks on the TV using

component cables.

You can hear the sound through the system’s

speakers.

Green

Blue

Red

If your TV accepts progressive format signals,

you must use this connection and set

[Progressive Scan] in [Display] setup to [On]

(See page 20).

,

Note

Optional Equipment

Connection

AUX In Connection

Connect an Output of auxiliary device to the AUX

(L/R) IN Connector.

Red

White

To the audio output jacks

of your component

(TV, VCR, etc.)

If your TV has only one output for audio

(mono), connect it to the left (white) audio jack

on the unit.

,

Note

TV

DM5330-AU_BUZBLLK_ENG.indd 17 2013-07-04  1:30:31

Connecting18

Connecting

2

USB Connection

Connect the USB port of USB Memory (or MP3

player, etc.) to the USB port on the front of the unit.

Removing the USB Device from the unit

1. Choose a different function/mode or

press STOP (

Z

) twice in a row.

2. Remove the USB device from the unit.

,

Note

DM5330-AU_BUZBLLK_ENG.indd 18 2013-07-04  1:30:32

3 System setting

System setting 19

System setting

3

Adjust the Setup

settings

By using the Setup menu, you can make various

adjustments to items such as picture and sound.

You can also set a language for the subtitles and

the Setup menu, among other things. For details on

each Setup menu item.

OSD Initial language settings

- Optional

When using this unit for the rst time, the initial

language setup menu appears on your TV screen.

You must complete initial language selection

before using the unit. English will be selected as the

initial language.

1. Press POWER (

1

) to turn the unit on.

The language setup menu will appear on the

screen.

2. Use

W/S/A/D

to select a language then

press ENTER (

b

).

The confirm menu will appear.

3. Use

A/D

to select [Enter] then press

ENTER (

b

) to finish the language setup.

To display and exit the Setup

Menu

1. Select the DVD/CD or USB function by pressing

FUNCTION.

2. Press SETUP.

Displays the [SETUP] Menu.

3. Press SETUP or RETURN (

x

) to exit in the

[SETUP] Menu.

About help menu for Setup

Menu Buttons Operation

w/s

Move

W/S

Moving to another

menu.

a

Prev.

A

Moving to previous

level.

d

Select

D

Moving to next level

or selecting menu.

x

Close

RETURN

To exit the [Setup]

menu.

b

Enter

ENTER To conrm menu.

DM5330-AU_BUZBLLK_ENG.indd 19 2013-07-04  1:30:32

System setting20

System setting

3

LANGUAGE

OSD

Select a language for the Setup menu and then on

screen display.

Disc Audio/Disc Subtitle/Disc Menu

Select the language you prefer for the audio track

(disc audio), subtitles, and the disc menu.

[Original]

Refers to the original language in which the disc

was recorded.

[Other]

To select another language, press numeric

buttons and then ENTER (

b

) to enter the

corresponding 4-digit number according to the

language code list on the page 36. If you enter

the wrong language code, press CLEAR.

[O (for Disc Subtitle)]

Turn o Subtitle.

DISPLAY

TV Aspect

Select which screen aspect to use based on the

shape of your TV screen.

[4:3]

Select when a standard 4:3 TV is connected.

[16:9]

Select when a 16:9 wide TV is connected.

Display Mode

The Display Mode setting works only when the TV

Aspect mode is set to 4:3.

[Letterbox]

This displays a wide screen picture with black

bands at the top and bottom of the screen.

[Panscan]

This lls the entire 4:3 screen, cropping the

picture as necessary.

Progressive Scan

(For Component Video connections)

Selects whether the COMPONENT

VIDEO(PROGRESSIVE SCAN) OUT jacks output

progressive signal. If your TV accepts progressive

format signals, you will enjoy accurate color

reproduction and high quality image by selecting

[On]. If your TV does not accept progressive format

signals, select [O ].

If you set Progressive Scan to [On] in error, you

must reset the unit. First, remove the disc from the

unit. Next, press and hold STOP (

Z

) for about ve

seconds. The video output will be restored to the

standard setting, and a picture will be visible on

your TV.

DM5330-AU_BUZBLLK_ENG.indd 20 2013-07-04  1:30:32

Page is loading ...

LG DM5330 User manual

LG DM5330 User manual

Related papers