LG 26LG3RC-TA Owner's manual

Category
LCD TVs
Type
Owner's manual
LCD TV
OWNER’S MANUAL
LCD TV MODELS
26LG3
***
32LG3
***
37LG3
***
42LG3
***
47LG3
***
Please read this manual carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
Refer to the label on the back cover and quote this
information.
To your dealer when requiring service.
ENGLISH
PP//NNOO:: MMFFLL4411441100111100 ((00881100--RREEVV0022))
PPrriinntteedd iinn KKoorreeaa
1
ACCESSORIES
Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the
dealer where you purchased the product.
Owner's
Manual
Owner’s Manual Batteries
M
U
T
E
P
I
P
A
V
M
O
D
E
FAV
TV
IN
P
U
T
STB
P
O
W
E
R
Q. M
EN
U
M
E
N
U
O
K
123
456
78
0
9
LIST
Q
.VIE
W
DVD
T
I
M
E
S
I
Z
E
U
P
D
A
T
E
REVEAL
I
N
D
E
X
H
O
L
D
T
E
X
T
R
E
T
U
R
N
P
Remote Control Power Cord
Polishing Cloth
Polishing cloth for use
on the screen
This feature is not
available
for all models.
*
Lightly wipe any stains or
fingerprints on the surface
of the TV with the polishing
cloth.
Do not use excessive force.
This may cause scratching or
discolouration.
Bolts for stand assembly
(Refer to p.6)
(Only 26/32/37/42LG3
***
)
x 4 x 4
((OOnn llyy
2266//3322//3377//4422LLGG33
**** **
))
Screw for stand fixing
(Refer to P. 9)
ACCESSORIES
protection cover
or
Protective Bracket and
Bolt for Power Cord
(Refer to P.8)
PICTURE CONTROL
Watching PIP(Picture-in-Picture) .............................47
Picture Size (Aspect Ratio)Control.........................48
Preset Picture Settings
- Picture Mode-Preset............................................50
- Auto Colour Tone Control(Cool/Medium/Warm)
51
Manual Picture Adjustment
- Picture Mode-User Option................................52
- Colour Tone - User Option...............................53
-
Picture Improvement Technology
...................54
Advanced - Gamma......................................................55
Advanced - Film Mode ................................................56
Advanced - Black(Darkness) Level...........................57
Advanced - Eye Care...................................................58
Picture Reset..................................................................59
Power Indicator .............................................................60
Factory Reset .................................................................61
WATCHING TV /PROGRAMME CONTROL
Remote Control Key Functions..................................30
Turning on the TV....................................................... 32
Programme Selection ................................................. 32
Volume Adjustment......................................................32
Quick Menu................................................................... 33
On Screen Menus Selection and Adjustment ......34
PICTURE CONTROL
WATCHING TV / PROGRAMME CONTROL
AACCCCEESSSSOORRIIEESS
.....................................................1
2
CONTENTS
CONTENTS
PREPARATION
Front Panel Controls................................................... 4
Back Panel Information .............................................. 5
Stand Installation ........................................................ 6
Please set it up carefully so the product
does not fall over.
. . . . . . . . . . . . . . . . . . . . . . . . . .7
Back Cover for Wire Arrangement........................... 8
Swivel Stand ................................................................. 9
Desktop Pedestal Installation ................................. 10
Wall Mount: Horizontal installation....................... 11
Not using the desk-type stand................................11
Antenna Connection ................................................ 12
PREPARATION
EXTERNAL EQUIPMENT SETUP
HD Receiver Setup .......................................................13
DVD Setup..................................................................... 16
VCR Setup..................................................................... 19
Other A/V Source Setup .......................................... 22
PC Setup.........................................................................23
- Screen Setup for PC Mode................................26
Auto Programme Tuning............................................ 35
Manual Programme Tuning ....................................... 36
Fine Tuning .....................................................................37
Assigning a Station Name ..........................................38
Booster............................................................................39
Programme Edit ........................................................... 40
Favourite Programme .................................................. 41
Selecting the Programme List .................................. 42
.................................................................. 43
Key lock.......................................................................... 45
AV Mode.........................................................................46
SOUND & LANGUAGE CONTROL
Auto Volume Leveler ....................................................62
Preset Sound Settings - Sound Mode....................63
Sound Setting Adjustment - User Mode ...............64
Balance............................................................................65
TV Speakers On/Off Setup .......................................66
I/II
- Stereo/Dual Reception ....................................... 67
- NICAM Reception ....................................................... 68
- Speaker Sound Output Selection.................... 68
On-Screen Menu Language Selection
...................... 69
3
CONTENTS
APPENDIX
Troubleshooting............................................................77
Maintenance .................................................................79
Product Specifications ................................................80
Programming the Remote Control ......................... 81
IR Codes ....................................................................... 83
External Control Through RS-232C ..................... 85
TIME SETTING
Clock Setup......................................................................70
Auto On/Off Timer Setting .........................................71
Sleep Timer Setting........................................................72
Auto Shut-off Setting...................................................73
TELETEXT
Switch On/Off ..............................................................74
SIMPLE Text....................................................................74
TOP Text .........................................................................75
FASTEXT .........................................................................75
Special Teletext Functions..........................................76
4
FRONT PANEL CONTROLS
PREPARATION
PREPARATION
This is a simplified representation of the front panel. Image shown may differ from your TV.
If your product has a protection film attached, remove the film and then wipe the product with a polishing
cloth.
POWER
Remote Control Sensor
Power/Standby Indicator
• illuminates red in standby mode.
• illuminates blue when the TV is switched on.
Note:
You can adjust
PPoowweerr IInnddiiccaattoorr
in
the Option menu.
P
MENU
INPUT
OK
+
-
PROGRAMME
VOLUME
OK
MENU
INPUT
5
PREPARATION
1
HDMI IN HDMI/DVI IN
1
1
2
2
RGB IN
COMPONENT IN
AUDIO
AV
VIDEO
VARIABLE
AUDIO OUT
S-Video Input
Connect S-Video out from
an S-VIDEO device.
Audio/Video Input
Connect audio/video out-
put from an external
device to these jacks.
HDMI IN HDMI IN HDMI/DVI IN HDMI/DVI IN
1
1
2
2
AUDIO
RGB
(PC)
RGB INRGB IN
COMPONENT INCOMPONENT IN
AUDIO
VIDEO
L(MONO)
R
AUDIOAUDIO
ANTENNA
IN
(RGB/DVI)
VIDEOVIDEO
RS-232C IN
(CONTROL)
-
+
MONO(8 )MONO(8 )
AV IN 1
SPEAKER
OUT
3 4
2
7
5
Power Cord Socket
This TV operates on an AC power. The voltage is
indicated on the Specifications page. Never
attempt to operate the TV on DC power.
HDMI Input
Connect a HDMI signal to HDMI IN.
Or DVI(VIDEO)signal to HDMI/DVI port with DVI
to HDMI cable.
RGB/Audio Input
Connect the monitor output from a PC to the
appropriate input port.
RS-232C Input
(CONTROL) Port
Connect the serial port of the control devices to
the RS-232C jack.
(This feature is not available for all models.)
Audio/Video Input (AV IN 1)
Connect audio/video output from an external
device to these jacks.
SPEAKER OUTPUT
Audio out for a external speaker system.
Component Input
Connect a component video/audio device to
these jacks.
Antenna Input
Connect RF antenna to this jack.
1
2
3
4
5
6
7
8
6
8
BACK PANEL INFORMATION
A
Image shown may differ from your TV.
6
PREPARATION
PREPARATION
1
3
4
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
2
Assemble the parts of the
SSttaanndd BBooddyy
with
the
CCoovveerr BBaassee
of the TV.
Assemble the TV as shown.
Fix the 4 bolts securely using the holes in the
back of the TV.
Stand Body
Cover Base
STAND INSTALLATION
26/32/37/42LG3
***
Image shown may differ from your TV
When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, thep
roduct can tilt forward after the product installation.) If you tighten the bolt with excessive force, the boltcan
deviate from abrasion of the tightening part of the bolt.
7
PREPARATION
PLEASE SET IT UP CAREFULLY SO THE PRODUCT DOES NOT
FALL OVER.
A
You should purchase necessary components to fix the TV to the wall on the market.
A
Position the TV close to the wall to avoid the possibility of it falling when pushed.
A
The instructions shown below are a safer way to
set up the TV, which is to fix it to the wall, avoiding the
possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury.
This will also prevent the TV from damage. Ensure that children do not climb or hang from the TV.
NOTE
!
G
When moving the TV undo the cords first.
G
Use a platform or cabinet string and large enough to support the size and weight of the TV.
G
To use the TV safely make sure that the height of the bracket on the wall and on the TV is the same.
3
1
2
Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture.
(If your TV has bolts in the eyebolts, loosen then bolts.)
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
Secure the wall brackets with bolts to the wall.
Ensure that both brackets are even.
3
Use a strong cord to secure the TV.
Secure the cord in such a way that it becomes taught when the TV is in position.
2
1
2
1
8
PREPARATION
PREPARATION
BACK COVER FOR WIRE ARRANGEMENT
Connect the cables as necessary.
To connect additional equipment, see the
External Equipment Setup section of the
manual.
Secure the power cable with the PROTECTIVE
BRACKET and the screw as shown. It will help
prevent the power cable from being removed
by accident.
1
Open the
CCAABBLLEE MMAANNAAGGEEMMEENNTT CCLLIIPP
as
shown and manage the cables.
2
CABLE MANAGEMENT CLIP
Fit the
CCAABBLLEE MMAANNAAGGEEMMEENNTT CCLLIIPP
as
shown.
3
NOTE
!
GG
Do not use the CABLE MANAGEMENT CLIP to lift the TV.
- If the TV is dropped, you may be injured or the TV may be damaged.
PROTECTIVE BRACKET
9
PREPARATION
SWIVEL STAND
This feature is not available for all models.
After installing the TV, you can adjust the TV manually
to the left or right direction by 20 degrees to suit your
viewing position.
Attaching the TV to a desk
(Only 26/32/37/42LG3***)
The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing
injury or damaging the product. Use only an attached screw.
1-Screw
(provided as parts of the product)
Desk
Stand
WARNING
!
GG
To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation
instructions. Tipping, shaking, or rocking the machine may cause injury.
10
The TV can be installed in various ways such as on a wall, or on a desktop etc.
The TV is designed to be mounted horizontally.
PREPARATION
PREPARATION
PREPARATION
DESKTOP PEDESTAL INSTALLATION
For adequate ventilation allow a clearance of 4” (10cm) all around the TV .
4 inches
4 inches
4 inches
4 inches
Power Supply
Circuit breaker
EARTHING
Ensure that you connect the earth wire to prevent possible electric shock. If grounding methods are not
possible, have a qualified electrician install a separate circuit breaker.
Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes.
11
PREPARATION
WALL MOUNT: HORIZONTAL INSTALLATION
For adequate ventilation allow a clearance of 4” (10cm) all around the TV. We recommend that you use a wall
mounting bracket of LG brand when mounting the TV to a wall.
4 inches
4 inches
4 inches
4 inches
4 inches
When installing the wall-mounted unit, use the protection cover for desk-type stand installation.
NOT USING THE DESK-TYPE STAND
or
HDMI IN HDMI/DVI IN
1
1
2
2
RGB IN
COMPONENT IN
AUDIO
ANTENNA
IN
AV
VIDEO
VARIABLE
AUDIO OUT
12
PREPARATION
PREPARATION
PREPARATION
ANTENNA CONNECTION
For optimum picture quality, adjust antenna direction.
An antenna cable and converter are not supplied.
To prevent damage do not connect to the mains outlet until all connections are made between the devices.
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
Outdoor
Antenna
Wall
Antenna
Socket
RF Coaxial Wire (75 ohm)
Antenna
UHF
Signal
Amplifier
VHF
In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to the
antenna as shown above.
If signal needs to be split for two TVs,use an antenna signal splitter for connection.
13
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment.
Image shown may differ from your TV.
COMPONENT IN
AUDIO
VIDEO
MONO(8 )
HDMI IN HDMI DVI IN
HDMI/DVI IN
1
COMPONENT IN
AUDIO
VIDEO
MONO(8 )
1
2
COMPONENT IN
AUDIO
VIDEO
HDMI IN HDMI DVI IN
HDMI/DVI IN
1
HDMI IN HDMI/DVI IN
1
1
2
2
RGB IN
COMPONENT IN
AUDIO
VIDEO
MONO(8 )
HDMI IN HDMI/DVI IN
1
1
2
2
RGB IN
COMPONENT IN
AUDIO
VIDEO
MONO(8 )
1 2
HD RECEIVER SETUP
Connecting with a component cable
Connect the video outputs
(
Y, P
B, PR
)
of the digital TV
top box to the
CCOOMMPPOONNEENNTT IINN VVIIDDEEOO
jacks on the
TV.
Connect the audio output of the digital set-top box to
the
CCOOMMPPOONNEENNTT IINN AAUUDDIIOO
jacks on the TV.
Turn on the digital set-top box.
(
Refer to the owner’s manual for the digital set-top box.
)
Select
CCoommppoonneenntt11
input source using the
IINNPPUUTT
button on the remote control.
If connected to
CCOOMMPPOONNEENNTT IINN22
, select
CCoommppoonneenntt22
input source.
2
3
4
1
Signal
480i/576i
480p/576p
720p/1080i
1080p
Component
Yes
Yes
Yes
Yes
(Only 50Hz, 60Hz)
HDMI1/DVI, HDMI2
No
Yes
Yes
Yes
(24Hz, 30Hz, 50Hz, 60Hz)
14
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
COMCOMPONENT IN
VIDEO
L(MONO)
R
AUDIOAUDIO
VIDEOVIDEO
-
+
MONO(8 )MONO(8 )
IN 1
AKER
UT
HDMI IN HDMI DVI IN
HDMI/DVI IN HDMI/DVI IN
1
COMPONENT IN
AUDIO
VIDEO
MONO(8 )
1
2
COMPONENT IN
HDMI IN HDMI DVI IN
HDMI/DVI IN
1
HDMI IN HDMI/DVI IN
1
1
2
2
RGB IN
COMPONENT IN
AUDIO
VIDEO
MONO(8 )
HDMI IN HDMI/DVI IN
1
1
2
2
RGB IN
COMPONENT IN
AUDIO
VIDEO
MONO(8 )
1
Connecting a set-top box with a HDMI cable
Connect the HDMI output of the digital set-top box to
the
HHDDMMII//DDVVII IINN 11
or
HHDDMMII IINN 22
jack on the TV.
Select
HHDDMMII11//DDVVII
or
HHDDMMII22
input source using the
IINNPPUUTT
button on the remote control.
Turn on the digital set-top box.
(
Refer to the owner’s manual for the digital set-top box.
)
2
3
1
GG
TV can receive the video and audio signal simultaneously with using a HDMI cable.
GG
If the digital set-top box supports Auto HDMI function, the output resolution of the source device will
be automatically TV to 1280x720p.
GG
If the digital set-top box player does not support Auto HDMI, you need to TV the output resolution
appropriately.
To get the best picture quality, adjust the output resolution of the source device to 1280x720p.
NOTE
!
15
EXTERNAL EQUIPMENT SETUP
COMPONENT IN
AUDIO
VIDEO
MONO(8 )
HDMI IN HDMI DVI IN
HDMI/DVI IN
1
1
2
COMPONENT INCOMPONENT IN
AUDIO
VIDEO
L(MONO)
R
AUDIOAUDIO
VIDEOVIDEO
-
+
MONO(8 )MONO(8 )
AV IN 1
SPEAKER
OUT
1
2
COMPONENT IN
HDMI IN HDMI DVI IN
HDMI/DVI IN HDMI/DVI IN
1
RGB
(PC)
RGB IN
RS-232C IN
(CONTROL)
HDMI IN HDMI/DVI IN
1
1
2
2
RGB IN
COMPONENT IN
AUDIO
VIDEO
MONO(8 )
HDMI IN HDMI/DVI IN
1
1
2
2
RGB IN
COMPONENT IN
AUDIO
VIDEO
MONO(8 )
AUDIO
(RGB/DVI)
1
2
Connect the DVI output of the digital set-top box to the
HHDDMMII//DDVVII IINN 11
jack on the TV.
Connect the audio output of the digital set-top box to the
AAUUDDIIOO((RRGGBB//DDVVII))
jack on the TV.
Turn on the digital set-top box.
(
Refer to the owner’s manual for the digital set-top box.
)
Select
HHDDMMII11//DDVVII
input source using the
IINNPPUUTT
button on the remote control.
2
3
4
1
Connecting with a HDMI to DVI cable
GG
HDMI2 source does not support DVI source.
GG
If the Set-Top Box has a DVI output and no HDMI output, a separated audio connection is necessary.
GG
If the Set-Top Box does not support Auto DVI, you need to set the output resolution appropriately.
NOTE
!
16
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
COMPONENT IN
AUDIO
VIDEO
MONO(8 )
HDMI IN HDMI DVI IN
HDMI/DVI IN
1
1
2
COMPONENT IN
AUDIO
VIDEO
HDMI IN HDMI DVI IN
AV IN 2
L/MONO
R
AUDIO
VIDEO
VARIABLE AUDIO OUT
1 2
DVD SETUP
Connecting with a component cable
Component Input ports
To achieve better picture quality, connect a DVD player to the component input ports as shown below.
Component ports on the TV
YPB PR
Video output ports
on DVD player
Y
Y
Y
Y
PB
B-Y
Cb
Pb
P
R
R-Y
Cr
Pr
Connect the video outputs
(
Y, P
B, PR
)
of the DVD to the
CCOOMMPPOONNEENNTT IINN VVIIDDEEOO
jacks on the TV.
Connect the audio outputs of the DVD to the
CCOOMMPPOONNEENNTT IINN AAUUDDIIOO
jacks on the TV.
Turn on the DVD player, insert a DVD.
Select
CCoommppoonneenntt11
input source using the
IINNPPUUTT
button
on the remote control.
If connected to
CCOOMMPPOONNEENNTT IINN22
, select
CCoommppoonneenntt 22
input source.
Refer to the DVD player's manual for operating instructions.
2
3
4
5
1
17
EXTERNAL EQUIPMENT SETUP
Connecting with a S-Video cable
Connect the S-VIDEO output of the DVD to the
SS--VVIIDDEEOO
input on the TV.
Connect the audio outputs of the DVD to the
AAUUDDIIOO
input jacks on the TV.
Turn on the DVD player, insert a DVD.
Select
AAVV22
input source using the
IINNPPUUTT
button on
the remote control.
Refer to the DVD player's manual for operating
instructions.
2
3
4
5
1
AV IN 2
L R
S-VIDEOVIDEO
OUTPUT
SWITCH
ANT IN
ANT OUT
1
2
18
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
COMPCOMPONENT IN
VIDEO
L(MONO)
R
AUDIOAUDIO
VIDEOVIDEO
-
+
MONO(8 )MONO(8 )
1
ER
HDMI IN HDMI DVI IN
HDMI/DVI IN HDMI/DVI IN
1
1
2
COMPONENT IN
HDMI IN HDMI DVI IN
AV IN 2
L/MONO
R
AUDIO
VIDEO
VARIABLE AUDIO OUT
1
Connecting with a HDMI cable
Connect the HDMI output of the DVD to the
HHDDMMII//DDVVII IINN 11
or
HHDDMMII IINN 22
jack on the TV.
Select
HHDDMMII11//DDVVII
or
HHDDMMII22
input source using the
IINNPPUUTT
button on the remote control.
Refer to the DVD player's manual for operating instruc-
tions.
1
GG
The TV can receive video and audio signals simultaneously
when using a HDMI cable.
GG
If the DVD player supports Auto HDMI function, the output reso-
lution of the source device will be automatically TV to 1280x720p.
GG
If the DVD player does not support Auto HDMI, you must TV
the output resolution appropriately.
To get the best picture quality, adjust the output resolution of
the source device to 1280x720p.
NOTE
!
2
3
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96

LG 26LG3RC-TA Owner's manual

Category
LCD TVs
Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI