20
6 . Maintenance
and cleaning
Service life of the product
extends and frequently faced
problems decrease if cleaned at
regular intervals.
B
WARNING: Unplug the
product before cleaning
it.
• Never use gasoline, benzene
or similar substances for
cleaning purposes.
• Never use any sharp
and abrasive tools, soap,
household cleaners,
detergent and wax polish for
cleaning.
• Dissolve one teaspoon of
carbonate in half litre of
water. Soak a cloth with
the solution and wrung it
thoroughly. Wipe the interior
of the appliance with this
cloth and the dry thoroughly.
• Make sure that no water
enters the lamp housing and
other electrical items.
• If you will not use the
appliance for a long period
of time, unplug it, remove all
food inside, clean it and leave
the door ajar.
• Check regularly that the door
gaskets are clean. If not,
clean them.
• To remove door and body
shelves, remove all of its
contents.
• Remove the door shelves
by pulling them up. After
cleaning, slide them from top
to bottom to install.
• Never use cleaning agents or
water that contain chlorine to
clean the outer surfaces and
chromium coated parts of
the product. Chlorine causes
corrosion on such metal
surfaces
6.1 Avoiding bad odours
Materials that may cause odour
are not used in the production
of our appliance. However, due
to inappropriate food preserving
conditions and not cleaning the
inner surface of the appliance
as required can bring forth the
problem of odour. Pay attention
to following to avoid this
problem:
• Keeping the appliance
clean is important. Food
residuals, stains, etc. can
cause odour. Therefore, clean
the appliance with Sodium
Bicarbonate dissolved in
water every few months.
Never use detergents or
soap.