LG 52LG7000 User manual

OWNER’S MANUAL

LCD TV MODELS

3322LLGG7700

****

3377LLGG7700

****

4422LLGG7700

****

4477LLGG7700

****

5522LLGG7700

****

PLASMA TV MODELS

5500PPGG7700

****

6600PPGG7700****

LCD TV

PLASMA TV

Please read this manual carefully before operating

your TV.

Retain it for future reference.

Record model number and serial number of the TV.

Refer to the label on the back cover and quote this

information.

To your dealer when requiring service.

ENGLISH

Trade Mark of the DVB Digital Video

Broadcasting Project (1991 to 1996)

IIDD NNuummbbeerr((ss))::

5512: 32LG7000

5511: 37LG7000

5510: 42LG7000

5530: 47LG7000

5509: 52LG7000

5245: 50PG7000

5244: 60PG7000

0678

This product qualifies for ENERGY STAR in

the “factory default (Home mode)” setting

and this is the setting in which power savings

will be achieved.(Plasma TV only)

1

ACCESSORIES

Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the

dealer where you purchased the TV.

■

Image shown may differ from your TV

Owner’s Manual Batteries

Remote Control

Power Cord

Polishing Cloth

Polishing cloth for use on

the screen.

This feature is not available for all models.

* Lightly wipe any stains or fingerprints on

the surface of the TV with the polishing

cloth.

Do not use excessive force. This may cause

scratching or discolouration.

LLCCDD TTVV mmooddeellss

Cable management clip

Protection cover

(Refer to p.13)

Ferrite core

(Refer to p.10)

PPLLAASSMMAA TTVV mmooddeellss

Protection Cover

(Refer to

p

. 13 )

or

Bolts for stand assembly

(Refer to p.8)

x 4

(32/37/42LG70

**

only)

1-screw for stand fixing

(Refer to p.12)

(32LG70

**

only)

CONTENTS

2

CONTENTS

ACCESSORIES

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1

PREPARATION

Front Panel Controls..................................................... 4

Back Panel Information ................................................ 6

Stand Installation........................................................... 8

Swivel Stand ................................................................... 8

Please set it up carefully so the product doesn’t fall

over..................................................................................... 9

Back Cover for Wire Arrangement .......................... 10

Desktop Pedestal Installation ................................... 12

Attaching the TV to a desk.........................................12

Wall Mount: Horizontal Installation ........................ 13

Not Using the desk-type stand.................................13

Antenna Connection................................................... 14

EXTERNAL EQUIPMENT SETUP

HD Receiver Setup ...................................................... 15

DVD Setup..................................................................... 17

VCR Setup..................................................................... 20

Insertion of CI Module .............................................. 22

Digital Audio Out Setup............................................ 23

Other A/V Source Setup........................................... 24

Usb in Setup................................................................. 25

PC Setup........................................................................ 26

- Screen Setup for PC Mode .............................. 29

WATCHING TV / PROGRAMME CONTROL

Remote Control Key Functions ............................... 34

Turning on the TV....................................................... 36

Programme Selection ................................................ 36

Volume Adjustment ................................................... 36

Quick Menu ................................................................. 37

On-Screen Menus Selection and Adjustment..... 38

Auto Programme Tuning ............................................ 39

Manual Programme Tuning (In Digital Mode)..... 40

Manual Programme Tuning (In Analogue Mode) ... 41

Programme Edit ........................................................... 43

Booster........................................................................... 46

Software Update.......................................................... 47

Diagnostics ................................................................... 48

CI Information.............................................................. 49

Selecting the Programme Table............................... 50

Input List........................................................................ 51

................................................................. 52

Input Label .................................................................... 54

AV Mode........................................................................ 54

Simple manual .............................................................. 55

TO USE THE BLUETOOTH

Precautions when using the Bluetooth ................. 56

Setting the Bluetooth................................................. 57

Set TV PIN......................................................................58

Bluetooth headset

- Connecting a new Bluetooth headset .............59

- Connecting to Bluetooth headset already regis-

tered............................................................................ 59

-

Disconnecting the Bluetooth headset during use

...60

- When requesting to connect to TV from the

Bluetooth headset....................................................60

Managing Registered Bluetooth device................. 61

My Bluetooth Information. ........................................62

Receiving photos through external Bluetooth device...

63

TO USE THE USB DEVICE

When connecting the USB device.......................... 64

Photo List ...................................................................... 65

Music List........................................................................69

EPG (ELECTRONIC PROGRAMME

GUIDE) (IN DIGITAL MODE)

- Switch on/off EPG ............................................... 72

- Select Programme ................................................ 72

- Button Function in NOW/NEXT Guide Mode 73

- Button Function in 8 Day Guide Mode.......... 73

- Button Function in Date Change Mode ......... 73

-

Button Function in Extended Description Box..

74

-

Button Function in Record/Remind Setting Mode

.74

- Button Function in Schedule List Mode......... 74

CONTENTS

3

PICTURE CONTROL

Picture Size (Aspect Ratio) Control....................... 75

Preset Picture Settings

- Picture Mode-Preset............................................ 77

- Auto Colour Tone Control

(Warm/Medium/Cool)..........................................78

Manual Picture Adjustment

- Picture Mode-User option................................. 79

-Picture Mode-Expert Control ............................ 80

Picture Improvement Technology ........................... 81

Advanced - Film Mode/ Real Cinema.................... 82

Advanced - Black(Darkness) Level ......................... 83

Advanced - Trumotion ................................................84

TruMotion Demo ..........................................................85

Eye Care..........................................................................86

Picture Reset................................................................. 87

Power Indicator .............................................................88

Image Sticking Minimization (ISM) Method........ 89

Power Saving Picture Mode...................................... 90

SOUND & LANGUAGE CONTROL

Auto Volume Leveler................................................... 91

Preset Sound Settings - Sound Mode................... 92

Sound Setting Adjustment -User Mode ............... 93

SRS TruSurround XT .................................................. 93

Clear Voice.................................................................... 94

Balance........................................................................... 95

TV Speakers On/ Off Setup .................................... 96

Selecting Digital Audio Out ..................................... 97

Audio Reset....................................................................98

I/II

- Stereo/Dual Reception (In Analogue Mode

Only)........................................................................... 99

- NICAM Reception (In Analogue Mode Only)... 100

- Speaker Sound Output Selection ................. 100

On-Screen Menu Language/Country Selection .... 101

Language Selection (In Digital Mode only)....... 102

TIME SETTING

Clock Setup ................................................................ 103

Auto On/ Off Timer Setting .................................. 104

Auto Shut-off Setting ............................................... 105

Time Zone Setup ...................................................... 106

Sleep Timer Setting .................................................. 106

PARENTAL CONTROL / RATINGS

Set Password & Lock System................................. 107

Block Programme ...................................................... 108

Parental Control ........................................................ 109

Key Lock ....................................................................... 110

TELETEXT

Switch on/off............................................................... 111

SIMPLE Text ................................................................. 111

TOP Text....................................................................... 111

FASTEXT....................................................................... 112

Special Teletext Functions ....................................... 112

DIGITAL TELETEXT

Teletext within Digital Service................................. 113

Teletext in Digital Service......................................... 113

APPENDIX

Troubleshooting ......................................................... 114

Maintenance ............................................................... 116

Product Specifications.............................................. 117

Programming the Remote Control ........................ 119

IR Codes....................................................................... 121

External Control Device Setup .............................. 123

PREPARATION

4

PREPARATION

FRONT PANEL CONTROLS

■

Image shown may differ from your TV

■

If your TV has a protection film attached, remove the film and then wipe the product with a polishing cloth.

Plasma TV Models

PR

VOL

OK

MENU

INPUT

PR

VOL

OK

MENU

INPUT

Remote Control Sensor

POWER

Power/Standby Indicator

• Illuminates red in standby mode.

• Illuminates green when the TV is

switched on.

PROGRAMMEVOLUMEMENU OKINPUT

P

OKOK

MENUMENU

INPUTINPUT

5

PREPARATION

LCD TV Models

POWER

Power/Standby Indicator

• illuminates red in standby mode.

• illuminates blue when the TV is switched on.

Note:

You can adjust

PPoowweerr IInnddiiccaattoorr

in the

Option menu.

P

MENU

INPUT

OK

PROGRAMME

VOLUME

OK

MENU

INPUT

Intelligent Sensor

Adjusts picture according to the

surrounding conditions.

Remote Control Sensor

PREPARATION

6

PREPARATION

BACK PANEL INFORMATION

A

Image shown may differ from your TV.

Power Cord Socket

This TV operates on an AC power. The voltage is

indicated on the Specifications page. Never

attempt to operate the TV on DC power.

HDMI Input

Connect a HDMI signal to HDMI IN.

Or DVI(VIDEO)signal to HDMI/DVI port with DVI

to HDMI cable.

RGB/DVI Audio Input

Connect the audio from a PC or DTV.

OPTICAL DIGITAL AUDIO OUT

Connect digital audio from various types of equipment.

Note: In standby mode, these ports do not work.

Component Input

Connect a component video/audio device to

these jacks.

RGB Input

Connect the output from a PC.

RS-232C IN (CONTROL & SERVICE) PORT

Connect to the RS-232C port on a PC.

Euro Scart Socket (AV1/AV2)

Connect scart socket input or output from an

external device to these jacks.

Antenna Input

Connect RF antenna to this jack.

PCMCIA (Personal Computer Memory Card

International Association) Card Slot

(This feature is not available in all countries.)

S-Video Input

Connect S-Video out from an S-VIDEO device.

Audio/Video Input

Connect audio/video output from an external

device to these jacks.

USB Input

1

2

3

4

7

8

9

10

11

12

1

5

6

2

3 4 5

6

7 8

9

Plasma TV Models

10

12

2

11

7

PREPARATION

LCD TV Models

1

Power Cord Socket

This TV operates on an AC power. The voltage is

indicated on the Specifications page. Never

attempt to operate the TV on DC power.

HDMI Input

Connect a HDMI signal to HDMI IN.

Or DVI(VIDEO)signal to HDMI/DVI port with DVI

to HDMI cable.

RGB/DVI Audio Input

Connect the audio from a PC or DTV.

OPTICAL DIGITAL AUDIO OUT

Connect digital audio from various types of equipment.

Note: In standby mode, these ports do not work.

Component Input

Connect a component video/audio device to

these jacks.

RGB Input

Connect the output from a PC.

RS-232C IN (CONTROL & SERVICE) PORT

Connect to the RS-232C port on a PC.

Euro Scart Socket (AV1/AV2)

Connect scart socket input or output from an

external device to these jacks.

Antenna Input

Connect RF antenna to this jack.

PCMCIA (Personal Computer Memory Card

International Association) Card Slot

(This feature is not available in all countries.)

S-Video Input

Connect S-Video out from an S-VIDEO device.

Audio/Video Input

Connect audio/video output from an external

device to these jacks.

USB Input

1

2

3

4

7

8

9

10

11

12

5

6

2

3 4 5

6

7 8

9

10

12

2

11

PREPARATION

8

PREPARATION

STAND INSTALLATION

■

Image shown may differ from your TV

When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can

tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion

of the tightening part of the bolt.

1 3

4

Carefully place the TV screen side down on a

cushioned surface to protect the screen from

damage.

2

Assemble the parts of the

SSttaanndd BBooddyy

with

the

CCoovveerr BBaassee

of the TV.

Assemble the TV as shown.

Fix the 4 bolts securely using the holes in the

back of the TV.

Stand Body

Cover Base

32/37/42LG70

**

only

SWIVEL STAND

After installing the TV, you can adjust the TV set man-

ually to the left or right direction by 20 degrees to

suit your viewing position.

PREPARATION

9

PLEASE SET IT UP CAREFULLY SO THE PRODUCT

DOESN’T FALL OVER.

2

1

A

You should purchase necessary components to fix the TV to the wall on the market.

A

Position the TV close to the wall to avoid the possibility of it falling when pushed.

A

The instructions shown below are a safer way to set up the TV, which is to fix it to the wall, avoiding the

possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury.

This will also prevent the TV from damage. Ensure that children do not climb or hang from the TV.

NOTE

!

G

When moving the TV undo the cords first.

G

Use a platform or cabinet strong and large enough to support the size and weight of the TV.

G

To use the TV safely make sure that the height of the bracket on the wall and on the TV is the same.

2

3

1

2

Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture.

(If your TV has bolts in the eyebolts, loosen then bolts.)

* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.

Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted on the

wall.

3

Use a sturdy rope to tie the product. It is safer to tie the rope so it becomes horizontal between

the wall and the product.

PREPARATION

10

PREPARATION

BACK COVER FOR WIRE ARRANGEMENT

Connect the cables as necessary.

To connect additional equipment, see the

EExxtteerrnnaall eeqquuiippmmeenntt SSeettuupp

section.

1

Install the

CCAABBLLEE MMAANNAAGGEEMMEENNTT CCLLIIPP

as shown.

2

NOTE

!

GG

Do not use the CABLE MANAGEMENT CLIP to lift the TV.

- If the TV is dropped, you may be injured or the TV may be damaged.

■

Image shown may differ from your TV.

Install the power plug closely.

Use of ferrite core

(50/60PG70** Only)

Ferrite core can be used to reduce the electromagnetic

wave when connecting the power cord.

The closer the location of the ferrite core to the power

plug, the better it is.

Plasma TV models

Hold the

CCAABBLLEE MMAANNAAGGEEMMEENNTT CCLLIIPP

with both hands and pull it upward.

How to remove the cable management clip

Separate CABLE MANAGEMENT

from TV by pressing two latches.

CABLE MANAGEMENT CLIP

11

PREPARATION

LCD TV models

Connect the cables as necessary.

To connect additional equipment, see the External Equipment Setup section of the manual.

1

Open the

CCAABBLLEE MMAANNAAGGEEMMEENNTT CCLLIIPP

as shown and manage the cables.

2

CABLE MANAGEMENT CLIP

Fit the

CCAABBLLEE MMAANNAAGGEEMMEENNTT CCLLIIPP

as shown.

3

PR

VOL

OK

MENU

INPUT

4 inches

4 inches 4 inches

4 inches

12

PREPARATION

DESKTOP PEDESTAL INSTALLATION

A

The TV can be installed in various ways such as on a wall, or on a desktop etc.

A

The TV is designed to be mounted horizontally.

Power Supply

Circuit breaker

EARTHING

Ensure that you connect the earth wire to prevent possible

electric shock. If grounding methods are not possible, have a

qualified electrician install a separate circuit breaker.

Do not try to earth the TV by connecting it to telephone

wires, lightening rods or gas pipes.

For adequate ventilation allow a clearance of 4” (10cm) all around the TV.

ATTACHING THE TV TO A DESK (32LG70

**

only )

The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing

injury or damaging the product. Use only an attached screw.

1-Screw

(provided as parts of the product)

Desk

Stand

WARNING

!

G

To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation

instructions. Tipping, shaking, or rocking the machine may cause injury.

13

PREPARATION

WALL MOUNT: HORIZONTAL INSTALLATION

For adequate ventilation allow a clearance of 4” (10cm) all around the TV. We recommend that you

use a wall mount-ing bracket of LG brand when mounting the TV to a wall.

4 inches

■

Image shown may differ from your TV.

When installing the wall-mounted unit, use the protection cover for desk-type stand installation.

NOT USING THE DESK-TYPE STAND

Plasma TV models

LCD TV models

Insert the

PPRROOTTEECCTTIIOONN CCOOVVEERR

into the TV until

clicking sound.

PREPARATION

14

PREPARATION

ANTENNA CONNECTION

AV 1 AV 2

ANTENNA

IN

AV 1 AV 2

ANTENNA

IN

■

For optimum picture quality, adjust antenna direction.

■

An antenna cable and converter are not supplied.

■

To prevent damage do not connect to the mains outlet until all connections are made between the devices.

Multi-family Dwellings/Apartments

(Connect to wall antenna socket)

Single-family Dwellings /Houses

(Connect to wall jack for outdoor antenna)

Outdoor

Antenna

(VHF, UHF)

Wall

Antenna

Socket

RF Coaxial Wire (75 ohm)

Antenna

UHF

Signal

Amplifier

VHF

■

In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to the

antenna as shown above.

■

If signal needs to be split for two TVs,use an antenna signal splitter for connection.

15

EXTERNAL EQUIPMENT SETUP

HD RECEIVER SETUP

■

To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment.

■

This section on EXTERNAL EQUIPMENT SETUP mainly uses diagrams for the 50PG70

**

models.

■

Image shown may differ from your TV.

Connecting with a component cable

1

2

Signal

480i/576i

480p/576p

720p/1080i

1080 p

Component

Yes

(50/60Hz only)

HDMI

No

Yes

(24Hz/30Hz/50Hz/60Hz)

■

This TV can receive Digital RF/Cable signals without an external digital set-top box. However, if you do receive

Digital signals from a digital set-top box or other digital external device, refer to the diagram as shown below.

Connect the video outputs

(

Y, P

B, PR

)

of the digital set

top box to the

CCOOMMPPOONNEENNTT IINN VVIIDDEEOO

jacks on the

TV.

Connect the audio output of the digital set-top box to

the

CCOOMMPPOONNEENNTT IINN AAUUDDIIOO

jacks on the TV.

Turn on the digital set-top box.

(

Refer to the owner’s manual for the digital set-top box.

)

Select

CCoommppoonneenntt

input source using the

IINNPPUUTT

button on the remote control.

2

3

4

1

16

EXTERNAL EQUIPMENT SETUP

Connecting a set-top box with an HDMI cable

1

Connecting with an HDMI to DVI cable

1

2

Connect the digital set-top box to

HHDDMMII//DDVVII IINN 11

,

HHDDMMII IINN 22

,

HHDDMMII IINN 33

or

HHDDMMII IINN 44

jack on the

TV.

Turn on the digital set-top box.

(

Refer to the owner’s manual for the digital set-top box.

)

Select

HHDDMMII11

,

HHDDMMII22

,

HHDDMMII33

or

HHDDMMII44

input

source using the

IINNPPUUTT

button on the remote control.

2

3

1

Connect the digital set-top box to

HHDDMMII//DDVVII IINN 11

jack on the TV.

Connect the audio output of the digital set-top box to

the

AAUUDDIIOO IINN ((RRGGBB//DDVVII))

jack on the TV.

Turn on the digital set-top box.

(

Refer to the owner’s

manual for the digital set-top box.

)

Select

HHDDMMII11

input source using the

IINNPPUUTT

button

on the remote control.

2

3

4

1

17

EXTERNAL EQUIPMENT SETUP

DVD SETUP

Connecting with a component cable

Component Input ports

To achieve better picture quality, connect a DVD player to the component input ports as shown below.

Component ports on the TV

YP

B

P

R

Video output ports

on DVD player

Y

PB

B-Y

Cb

Pb

P

R

R-Y

Cr

Pr

1

2

Connect the video outputs

(

Y, PB, P

R

)

of the DVD to the

CCOOMMPPOONNEENNTT IINN VVIIDDEEOO

jacks on the TV.

Connect the audio outputs of the DVD to the

CCOOMMPPOONNEENNTT IINN AAUUDDIIOO

jacks on the TV.

Turn on the DVD player, insert a DVD.

Select

CCoommppoonneenntt

input source using the

IINNPPUUTT

button on the remote control.

Refer to the DVD player's manual for operating instruc-

tions.

2

3

4

5

1

18

EXTERNAL EQUIPMENT SETUP

(R) AUDIO (L)

AUDIO/

VIDEO

1

Connecting with a S-Video cable

L R

S-VIDEOVIDEO

OUTPUT

SWITCH

ANT IN

ANT OUT

Connect the S-VIDEO output of the DVD to the

SS --

VVIIDDEEOO

input on the TV.

Connect the audio outputs of the DVD to the

AAUUDDIIOO

input jacks on the TV.

Turn on the DVD player, insert a DVD.

Select

AA VV33

input source using the

IINNPPUUTT

button on

the remote control.

Refer to the DVD player's manual for operating instruc-

tions.

2

3

4

5

1

2

3

4

1

2

Connecting with a Euro Scart cable

Connect the Euro scart socket of the DVD to the

AAVV11

Euro scart socket on the TV.

Turn on the DVD player, insert a DVD.

Select

AA VV11

input source using the

IINNPPUUTT

button on

the remote control.

If connected to

AA VV22

Euro scart socket, select

AA VV22

input source.

Refer to the DVD player's manual for operating

instructions.

NOTE

!

GG

Any Euro scart cable used must be signal shielded.

Page is loading ...

LG 52LG7000 User manual

This manual is also suitable for

LG 52LG7000 User manual

Related papers

Other documents