American Standard 4332.001 User manual

Category
Faucets
Type
User manual

This manual is also suitable for

A9
© 2008 AS America Inc.
PEKOE™
SINGLE CONTROL KITCHEN FAUCET
WITH HI-FLOW SPOUT
MODEL NUMBER:
4332.001 Kitchen Faucet With Hi-Flow Spout
4332.001
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1
NSF 61/Section 9
CSA B125
GENERAL DESCRIPTION:
Forged brass body and brass swivel spout with metal
lever handle. Washerless 40mm ceramic disc valve
cartridge. Brass mounting shank with brass fixation ring.
Braided flexible supply hoses with 3/8” compression
connectors. 2.2 gpm/8.3L/min. maximum flow rate.
SUGGESTED SPECIFICATION:
Single control kitchen faucet shall feature a forged brass body, brass swivel spout and metal lever handle. Shall also feature
washerless ceramic disc valve cartridge, flexible supply hoses. Fitting shall be American Standard Model # 4332.001.____ .
PRODUCT FEATURES:
Ceramic Disc Valve Cartridge: Assures smooth, precise valve
control and a lifetime of drip-free, maintenance free performance.
Brass Construction: Highest quality faucet materials for
durability & long life.
Memory Position Valving:
Allows user to turn valve on and off at
preferred temperature setting without readjusting handle position
each time.
Low Lead: Meets NSF Standard 61/Section 9 & Prop 65 lead
requirements.
Choice of Finishes: Choice of Polished Chrome or Stainless
Steel (PVD).
373mm
(14-3/4)
154mm
(6)
237mm
(9-1/4)
170mm
(6-3/4)
700mm
(27-1/2)
51mm
(2)
33 to 38mm
(1-3/8 to 1-1/2)
DIA. MOUNTING HOLE
FLOW RATE*
GALLONS PER MINUTE
I N L E T P R E S S U R E ( P S I )
*Flow rates shown are for mixed hot and cold.
0.0
0.5
1.0
1.5
2.0
2.5
3.0
10080604020
Product
Number
Description
Finish Options
PVD
Stainless
Steel
075
Polished
Chrome
002
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
Hi-Flow Kitchen Faucet.
A10
© 2008 AS America Inc.
PEKOE™
SINGLE CONTROL KITCHEN FAUCET
WITH HI-FLOW SPOUT
MODEL NUMBER:
4332.001 Kitchen Faucet With Hi-Flow Spout
4332.001
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1
NSF 61/Section 9
CSA B125
GENERAL DESCRIPTION:
Forged brass body and brass swivel spout with metal
lever handle. Washerless 40mm ceramic disc valve
cartridge. Brass mounting shank with brass fixation ring.
Braided flexible supply hoses with 3/8” compression
connectors. 2.2 gpm/8.3L/min. maximum flow rate.
SUGGESTED SPECIFICATION:
Single control kitchen faucet shall feature a forged brass body, brass swivel spout and metal lever handle. Shall also feature
washerless ceramic disc valve cartridge, flexible supply hoses. Fitting shall be American Standard Model # 4332.001.____ .
PRODUCT FEATURES:
Ceramic Disc Valve Cartridge: Assures smooth, precise valve
control and a lifetime of drip-free, maintenance free performance.
Brass Construction: Highest quality faucet materials for
durability & long life.
Memory Position Valving:
Allows user to turn valve on and off at
preferred temperature setting without readjusting handle position
each time.
Low Lead: Meets NSF Standard 61/Section 9 & Prop 65 lead
requirements.
Choice of Finishes: Choice of Polished Chrome or Stainless
Steel (PVD).
373mm
(14-3/4)
154mm
(6)
237mm
(9-1/4)
170mm
(6-3/4)
700mm
(27-1/2)
51mm
(2)
33 to 38mm
(1-3/8 to 1-1/2)
DIA. MOUNTING HOLE
FLOW RATE*
GALLONS PER MINUTE
I N L E T P R E S S U R E ( P S I )
*Flow rates shown are for mixed hot and cold.
0.0
0.5
1.0
1.5
2.0
2.5
3.0
10080604020
Product
Number
Description
Finish Options
PVD
Stainless
Steel
075
Polished
Chrome
002
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
Hi-Flow Kitchen Faucet.
  • Page 1 1
  • Page 2 2

American Standard 4332.001 User manual

Category
Faucets
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI