Page is loading ...
L63
© 2006 American Standard Inc.
COLONY SOFT
SINGLE CONTROL LAVATORY FAUCET
2175.502 Shown.
MODEL NUMBER:
2175.502 Lavatory Faucet
Metal Lever Handle. Metal Speed Connect™
Pop-up drain
2175.503 Lavatory Faucet
Metal Lever Handle. Non-Metallic Speed Connect™
Pop-up drain.
GENERAL DESCRIPTION:
Single control lavatroy faucet on 4" centers. Washerless
40mm ceramic disc valve cartridge. Durable cast brass
waterway with 1/2" male threaded brass inlet shanks. Metal
body with color matched underbody. Metal lever handle.
20"
(500mm) long flexible stainless steel drain cable is
pre-assembled to faucet body.
Metal Speed Connect™ drain
body with 1-1/4 inch (32mm) tail piece, (2175.502). Non-Metallic
Speed Connect™ drain body with 1-1/4 inch (32mm) tail piece,
(2175.503).
2.2 gpm/8.3L/min. maximum flow rate.
SUGGESTED SPECIFICATION:
Single control lavatory fitting shall feature cast brass waterways with 1/2" male inlet shanks. Shall also feature washerless
40mm ceramic disc valve cartridge. Shall also feature a drain body with stainless steel cable actuation. Fitting shall be
American Standard Model # 2175.____.____.
PRODUCT FEATURES:
Cast Brass Waterways with "City Shanks": Strong and
durable. Integral tabs on casting provide a wobble-free
installation.
Ceramic Disc Valve Cartridge: Assures a lifetime of
drip-free performance.
Low Lead: Meets NSF Standard 61/Section 9 & Prop 65 lead
requirements.
Speed Connect™ Drain:
• Fewer parts. Installs in less time.
• No adjustments required - seals the first time, every time.
• Flexible stainless steel cable - installs effortlessly in tight spaces.
Longer Spout: Provides extended reach into lavatory.
Simple Installation:
Fast and easy one person installation.
Faucet drops in from top. Quick spin nuts secure faucet in place.
121mm
(4-3/4")
85mm
(3-1/4")
76mm
(3")
41mm
(1-5/8")
25mm
(1")
40mm
(1-9/16")
153mm
(6-1/16")
102mm
(4")
107mm
(4-3/16")
HOLE
SIZE
29mm
(1-1/8")
32mm OD
(1-1/4 OD)
L64
© 2006 American Standard Inc.
COLONY SOFT
SINGLE CONTROL LAVATORY FAUCET
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1
NSF 61/Section 9
CSA B 125
Product
Number
Description
Finish Options
PVD
Polished
Brass
099
Polished
Chrome
002
Lavatory faucet. Metal Speed Connect™ Pop-up drain.
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
FLOW RATE*
GALLONS PER MINUTE
INLET PRESSURE (PSI)
*Flow rates shown are for mixed hot and cold.
0.0
0.5
1.0
1.5
2.0
2.5
3.0
10080604020
2175.502
Lavatory faucet. Non-Metallic Speed Connect™ Pop-up drain.
2175.503
N/A = NOT AVAILABLE
/